Re: [PATCH V2] ARM: dts: bcm283x: Reserve first page for firmware

["Andreas Färber" <afaerber-l3A5Bk7waGM@public.gmane.org>]

Am 09.05.2017 um 11:04 schrieb Phil Elwell:
> The Raspberry Pi startup stub files for multi-core BCM27XX processors

Curiously, while this V2 was rebased to apply against the bcm283x rather
than bcm2710 file, it changed the text from BCM283X to BCM27XX.

> make the secondary CPUs spin until the corresponding mailbox is
> written. These stubs are loaded at physical address 0x00000xxx (as seen
> by the ARMs), but this page will be reused by the kernel unless it is
> explicitly reserved, causing the waiting cores to execute random code.
> 
> Use the /memreserve/ Device Tree directive to mark the first page as
> off-limits to the kernel.
> 
> See: https://github.com/raspberrypi/linux/issues/1989
> 
> Signed-off-by: Phil Elwell <phil-FnsA7b+Nu9XbIbC87yuRow@public.gmane.org>
> ---
> 
> Changes in V2:
> - Rebase against linux-next
> - Drop downstream-only patch
> 
>  arch/arm/boot/dts/bcm283x.dtsi | 2 ++
>  1 file changed, 2 insertions(+)

Regards,
Andreas

-- 
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton
HRB 21284 (AG Nürnberg)
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html