devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Vaishnav Achath <vaishnav.a@ti.com>
To: Sebastian LaVine <slavine@d3embedded.com>,
	<devicetree@vger.kernel.org>, <imx@lists.linux.dev>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-media@vger.kernel.org>
Cc: "Nícolas F. R. A. Prado" <nfraprado@collabora.com>,
	"Abel Vesa" <abel.vesa@linaro.org>,
	"AngeloGioacchino Del Regno"
	<angelogioacchino.delregno@collabora.com>,
	"Ard Biesheuvel" <ardb@kernel.org>,
	"Benjamin Mugnier" <benjamin.mugnier@foss.st.com>,
	"Biju Das" <biju.das.jz@bp.renesas.com>,
	"Bjorn Andersson" <quic_bjorande@quicinc.com>,
	"Catalin Marinas" <catalin.marinas@arm.com>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Dmitry Baryshkov" <dmitry.baryshkov@linaro.org>,
	"Elinor Montmasson" <elinor.montmasson@savoirfairelinux.com>,
	"Fabio Estevam" <festevam@gmail.com>,
	"Geert Uytterhoeven" <geert+renesas@glider.be>,
	"Hans Verkuil" <hverkuil@xs4all.nl>,
	"Javier Carrasco" <javier.carrasco@wolfvision.net>,
	"Jianzhong Xu" <xuj@ti.com>,
	"Julien Massot" <julien.massot@collabora.com>,
	"Kieran Bingham" <kieran.bingham@ideasonboard.com>,
	"Kory Maincent" <kory.maincent@bootlin.com>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski@linaro.org>,
	"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
	"Mauro Carvalho Chehab" <mchehab@kernel.org>,
	"Mikhail Rudenko" <mike.rudenko@gmail.com>,
	"Nishanth Menon" <nm@ti.com>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Rob Herring" <robh@kernel.org>,
	"Sakari Ailus" <sakari.ailus@linux.intel.com>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Shawn Guo" <shawnguo@kernel.org>,
	"Stuart Burtner" <sburtner@d3embedded.com>,
	"Tero Kristo" <kristo@kernel.org>,
	"Thakkar Devarsh" <devarsht@ti.com>,
	"Tomi Valkeinen" <tomi.valkeinen@ideasonboard.com>,
	"Umang Jain" <umang.jain@ideasonboard.com>,
	"Vignesh Raghavendra" <vigneshr@ti.com>,
	"Will Deacon" <will@kernel.org>, "Zhi Mao" <zhi.mao@mediatek.com>
Subject: Re: [PATCH 3/4] arm64: dts: ti: k3-am62a7-sk: Add overlay for fusion 2 board
Date: Wed, 19 Feb 2025 00:37:49 +0530	[thread overview]
Message-ID: <bbf4f6db-cac1-4558-b345-8b4d6b36a8fa@ti.com> (raw)
In-Reply-To: <20250212195656.69528-4-slavine@d3embedded.com>

Hi Sebastian,

On 13/02/25 01:26, Sebastian LaVine wrote:
> Adds an overlay for the Fusion 2 (FPD-Link IV) board on SK-AM62A.
> 

Were you able to test and get this working without additional patches on 
linux-next?

The multi-steam support for J721E-CSI2RX and CDNS-CSI2RX drivers are 
still WIP [1] and as per my understanding you will need those to get 
this overlay functional.

1 - 
https://lore.kernel.org/all/20240627-multistream-v2-0-6ae96c54c1c3@ti.com/

Thanks and Regards,
Vaishnav

> Signed-off-by: Sebastian LaVine <slavine@d3embedded.com>
> Mentored-by: Stuart Burtner <sburtner@d3embedded.com>
> ---
>   MAINTAINERS                                   |   1 +
>   arch/arm64/boot/dts/ti/Makefile               |   1 +
>   .../boot/dts/ti/k3-am62a7-sk-fusion-2.dtso    | 115 ++++++++++++++++++
>   3 files changed, 117 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/ti/k3-am62a7-sk-fusion-2.dtso
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 27fb3c1be732..bf6a48da0887 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -21890,6 +21890,7 @@ M:      Stuart Burtner <sburtner@d3embedded.com>
>   L:     linux-media@vger.kernel.org
>   S:     Odd Fixes
>   F:     Documentation/devicetree/bindings/media/i2c/sony,imx728.yaml
> +F:     arch/arm64/boot/dts/ti/k3-am62a7-sk-fusion-2.dtso
>   F:     drivers/media/i2c/imx728.c
> 
>   SONY MEMORYSTICK SUBSYSTEM
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index f71360f14f23..fcd8d11e5678 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -31,6 +31,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-nand.dtbo
>   # Boards with AM62Ax SoC
>   dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
>   dtb-$(CONFIG_ARCH_K3) += k3-am62a7-phyboard-lyra-rdk.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk-fusion-2.dtbo
> 
>   # Boards with AM62Px SoC
>   dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
> diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk-fusion-2.dtso b/arch/arm64/boot/dts/ti/k3-am62a7-sk-fusion-2.dtso
> new file mode 100644
> index 000000000000..68e06d643bfd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk-fusion-2.dtso
> @@ -0,0 +1,115 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * DT Overlay for Fusion 2 (FPD-Link IV) board on SK-AM62A
> + * https://www.ti.com/tool/J7EXPAXEVM/
> + *
> + * Copyright (C) 2024 D3 Embedded - https://www.d3embedded.com
> + */
> +
> + /dts-v1/;
> + /plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +&{/} {
> +       clk_fusion2_25M_fixed: fixed-clock-25M {
> +               compatible = "fixed-clock";
> +               #clock-cells = <0>;
> +               clock-frequency = <25000000>;
> +       };
> +};
> +
> +&exp2 {
> +       p9-hog {
> +               /* P9 - CSI_RSTz */
> +               gpio-hog;
> +               gpios = <9 GPIO_ACTIVE_HIGH>;
> +               output-high;
> +               line-name = "CSI_RSTz";
> +       };
> +
> +       p19-hog {
> +               /* P19 -CSI_SEL2 */
> +               gpio-hog;
> +               gpios = <19 GPIO_ACTIVE_HIGH>;
> +               output-low;
> +               line-name = "CSI_SEL2";
> +       };
> +};
> +
> +&main_i2c2 {
> +       #address-cells = <1>;
> +       #size-cells = <0>;
> +       status = "okay";
> +
> +       i2c-switch@71 {
> +               compatible = "nxp,pca9543";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               reg = <0x71>;
> +
> +               i2c@1 {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +                       reg = <1>;
> +
> +                       deser@3d {
> +                               compatible = "ti,ds90ub9702-q1";
> +                               reg = <0x3d>;
> +
> +                               clock-names = "refclk";
> +                               clocks = <&clk_fusion2_25M_fixed>;
> +
> +                               i2c-alias-pool = <0x4a 0x4b 0x4c 0x4d 0x4e 0x4f>;
> +
> +                               ds90ub9702_0_ports: ports {
> +                                       #address-cells = <1>;
> +                                       #size-cells = <0>;
> +
> +                                       /* CSI-2 TX */
> +                                       port@4 {
> +                                               reg = <4>;
> +                                               ds90ub9702_0_csi_out: endpoint {
> +                                                       data-lanes = <1 2 3 4>;
> +                                                       clock-lanes = <0>;
> +                                                       link-frequencies = /bits/ 64 <800000000>;
> +                                                       remote-endpoint = <&csi2_phy0>;
> +                                               };
> +                                       };
> +                               };
> +
> +                               ds90ub9702_0_links: links {
> +                                       #address-cells = <1>;
> +                                       #size-cells = <0>;
> +                               };
> +                       };
> +               };
> +       };
> +};
> +
> +&cdns_csi2rx0 {
> +       ports {
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +
> +               csi0_port0: port@0 {
> +                       reg = <0>;
> +                       status = "okay";
> +
> +                       csi2_phy0: endpoint {
> +                               remote-endpoint = <&ds90ub9702_0_csi_out>;
> +                               data-lanes = <1 2 3 4>;
> +                               clock-lanes = <0>;
> +                               link-frequencies = /bits/ 64 <800000000>;
> +                       };
> +               };
> +       };
> +};
> +
> +&ti_csi2rx0 {
> +       status = "okay";
> +};
> +
> +&dphy0 {
> +       status = "okay";
> +};
> --
> 2.34.1
> 
> Please be aware that this email includes email addresses outside of the organization.

  parent reply	other threads:[~2025-02-18 19:08 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-12 19:56 [PATCH 0/4] media: i2c: Add driver for Sony IMX728 Sebastian LaVine
2025-02-12 19:56 ` [PATCH 1/4] media: dt-bindings: Add " Sebastian LaVine
2025-02-12 20:07   ` Krzysztof Kozlowski
2025-02-26 19:15     ` Sebastian LaVine
2025-02-13  9:26   ` Krzysztof Kozlowski
2025-02-26 17:50     ` Sebastian LaVine
2025-02-26 18:53       ` Sebastian LaVine
2025-02-26 21:38       ` Krzysztof Kozlowski
2025-02-12 19:56 ` [PATCH 2/4] media: i2c: Add driver for " Sebastian LaVine
2025-02-12 20:11   ` Krzysztof Kozlowski
2025-02-26 20:13     ` Sebastian LaVine
2025-02-26 21:40       ` Krzysztof Kozlowski
2025-02-13 10:19   ` Laurent Pinchart
2025-03-10 19:39     ` Sebastian LaVine
2025-03-11 10:18       ` Sakari Ailus
2025-02-13 18:19   ` Krzysztof Kozlowski
2025-03-07 21:21     ` Sebastian LaVine
2025-02-19 17:51   ` Markus Elfring
2025-02-26 21:17     ` Sebastian LaVine
2025-02-12 19:56 ` [PATCH 3/4] arm64: dts: ti: k3-am62a7-sk: Add overlay for fusion 2 board Sebastian LaVine
2025-02-12 20:13   ` Krzysztof Kozlowski
2025-02-26 22:00     ` Sebastian LaVine
2025-02-18 18:45   ` Nishanth Menon
2025-02-26 22:04     ` Sebastian LaVine
2025-02-18 19:07   ` Vaishnav Achath [this message]
2025-03-10 18:32     ` Sebastian LaVine
2025-02-19  9:31   ` Tomi Valkeinen
2025-02-26 22:06     ` Sebastian LaVine
2025-02-12 19:56 ` [PATCH 4/4] arm64: dts: ti: Add overlays for IMX728 RCM Sebastian LaVine
2025-02-18 18:46   ` Nishanth Menon
2025-02-12 20:04 ` [PATCH 0/4] media: i2c: Add driver for Sony IMX728 Krzysztof Kozlowski
2025-02-26 16:50   ` Sebastian LaVine
2025-02-13 10:40 ` Kieran Bingham
2025-02-26 17:05   ` Sebastian LaVine

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=bbf4f6db-cac1-4558-b345-8b4d6b36a8fa@ti.com \
    --to=vaishnav.a@ti.com \
    --cc=abel.vesa@linaro.org \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=ardb@kernel.org \
    --cc=benjamin.mugnier@foss.st.com \
    --cc=biju.das.jz@bp.renesas.com \
    --cc=catalin.marinas@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=devarsht@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=elinor.montmasson@savoirfairelinux.com \
    --cc=festevam@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=hverkuil@xs4all.nl \
    --cc=imx@lists.linux.dev \
    --cc=javier.carrasco@wolfvision.net \
    --cc=julien.massot@collabora.com \
    --cc=kernel@pengutronix.de \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=kory.maincent@bootlin.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mike.rudenko@gmail.com \
    --cc=nfraprado@collabora.com \
    --cc=nm@ti.com \
    --cc=quic_bjorande@quicinc.com \
    --cc=robh@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sburtner@d3embedded.com \
    --cc=shawnguo@kernel.org \
    --cc=slavine@d3embedded.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=umang.jain@ideasonboard.com \
    --cc=vigneshr@ti.com \
    --cc=will@kernel.org \
    --cc=xuj@ti.com \
    --cc=zhi.mao@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).