Re: [PATCH v5 4/6] soc: qcom: Add LLCC support for multi channel DDR

[Komal Bajaj <quic_kbajaj@quicinc.com>]

On 7/24/2023 6:10 PM, Mukesh Ojha wrote:
>
>
> On 7/24/2023 2:11 PM, Komal Bajaj wrote:
>> Add LLCC support for multi channel DDR configuration
>> based on a feature register.
>>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
>>   drivers/soc/qcom/llcc-qcom.c | 26 +++++++++++++++++++++++++-
>>   1 file changed, 25 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c
>> index 321f8d2079f7..1d2b08dfecea 100644
>> --- a/drivers/soc/qcom/llcc-qcom.c
>> +++ b/drivers/soc/qcom/llcc-qcom.c
>> @@ -12,6 +12,7 @@
>>   #include <linux/kernel.h>
>>   #include <linux/module.h>
>>   #include <linux/mutex.h>
>> +#include <linux/nvmem-consumer.h>
>>   #include <linux/of.h>
>>   #include <linux/of_device.h>
>>   #include <linux/regmap.h>
>> @@ -997,6 +998,19 @@ static int qcom_llcc_cfg_program(struct 
>> platform_device *pdev,
>>       return ret;
>>   }
>>   +static int qcom_llcc_get_cfg_index(struct platform_device *pdev, 
>> u8 *cfg_index)
>> +{
>> +    int ret;
>> +
>> +    ret = nvmem_cell_read_u8(&pdev->dev, "multi-chan-ddr", cfg_index);
>> +    if (ret == -ENOENT || ret == -EOPNOTSUPP) {
>> +        *cfg_index = 0;
>> +        return 0;
>> +    }
>> +
>> +    return ret;
>> +}
>> +
>>   static int qcom_llcc_remove(struct platform_device *pdev)
>>   {
>>       /* Set the global pointer to a error code to avoid referencing 
>> it */
>> @@ -1033,6 +1047,7 @@ static int qcom_llcc_probe(struct 
>> platform_device *pdev)
>>       const struct qcom_llcc_config *cfg;
>>       const struct llcc_slice_config *llcc_cfg;
>>       u32 sz;
>> +    u8 cfg_index;
>>       u32 version;
>>       struct regmap *regmap;
>>   @@ -1050,7 +1065,16 @@ static int qcom_llcc_probe(struct 
>> platform_device *pdev)
>>       }
>>         cfgs = of_device_get_match_data(&pdev->dev);
>> -    cfg = &cfgs->llcc_config[0];
>> +    ret = qcom_llcc_get_cfg_index(pdev, &cfg_index);
>> +     if (ret)
>
> alignment.. ?

Thanks for pointing it out. Will fix it in the next series.

Thanks
Komal

>
> -Mukesh
>
>> +        goto err;
>> +
>> +    if (cfg_index >= cfgs->num_cfgs) {
>> +        ret = -EINVAL;
>> +        goto err;
>> +    }
>> +
>> +    cfg = &cfgs->llcc_config[cfg_index];
>>         ret = regmap_read(regmap, 
>> cfg->reg_offset[LLCC_COMMON_STATUS0], &num_banks);
>>       if (ret)