[PATCH 0/3] Add support for PMXR2230 PMIC

[PATCH 0/3] Add support for PMXR2230 PMIC

[Luca Weiss]

The PMXR2230 PMIC is used in conjuction with SM7635. Add binding docs
and the devicetree description for it.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
Luca Weiss (3):
      dt-bindings: leds: qcom,spmi-flash-led: Add PMXR2230
      dt-bindings: mfd: qcom-spmi-pmic: Document PMXR2230 PMIC
      arm64: dts: qcom: Add PMXR2230 PMIC

 .../bindings/leds/qcom,spmi-flash-led.yaml         |  1 +
 .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml    |  1 +
 arch/arm64/boot/dts/qcom/pmxr2230.dtsi             | 63 ++++++++++++++++++++++
 3 files changed, 65 insertions(+)
---
base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
change-id: 20250620-sm7635-pmxr2230-ee55a86a8c2b

Best regards,
-- 
Luca Weiss <luca.weiss@fairphone.com>

[PATCH 1/3] dt-bindings: leds: qcom,spmi-flash-led: Add PMXR2230

[Luca Weiss]

Document compatible for PMXR2230 Torch and Flash LED controller.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
index bcf0ad4ea57ea6dbba9ce71280bc3cb9f74db83f..8edb706d72996f8d7f0f5c2d5a5910790660275a 100644
--- a/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
+++ b/Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
@@ -29,6 +29,7 @@ properties:
           - qcom,pm8350c-flash-led
           - qcom,pm8550-flash-led
           - qcom,pmi8998-flash-led
+          - qcom,pmxr2230-flash-led
       - const: qcom,spmi-flash-led
 
   reg:

-- 
2.50.0

[PATCH 2/3] dt-bindings: mfd: qcom-spmi-pmic: Document PMXR2230 PMIC

[Luca Weiss]

Document the compatible string for the PMXR2230 PMIC.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 078a6886f8b1e9ceb2187e988ce7c9514ff6dc2c..5759cdee7237e0fee705e13288a4255e4d0a83eb 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -97,6 +97,7 @@ properties:
           - qcom,pmx55
           - qcom,pmx65
           - qcom,pmx75
+          - qcom,pmxr2230
           - qcom,smb2351
           - qcom,smb2360
       - const: qcom,spmi-pmic

-- 
2.50.0

[PATCH 3/3] arm64: dts: qcom: Add PMXR2230 PMIC

[Luca Weiss]

Add a dts for the PMIC used e.g. with SM7635 devices.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
 arch/arm64/boot/dts/qcom/pmxr2230.dtsi | 63 ++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmxr2230.dtsi b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..a7650f3230c01422b76ef78e897e5e7ae2f20cc6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmxr2230_thermal: pmxr2230-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmxr2230_temp_alarm>;
+
+			trips {
+				pmxr2230_trip0: trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				pmxr2230_crit: pmxr2230-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmxr2230: pmic@1 {
+		compatible = "qcom,pmxr2230", "qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmxr2230_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmxr2230_gpios: gpio@8800 {
+			compatible = "qcom,pmxr2230-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmxr2230_gpios 0 0 12>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmxr2230_flash: led-controller@ee00 {
+			compatible = "qcom,pmxr2230-flash-led", "qcom,spmi-flash-led";
+			reg = <0xee00>;
+			status = "disabled";
+		};
+	};
+};

-- 
2.50.0

Re: [PATCH 3/3] arm64: dts: qcom: Add PMXR2230 PMIC

[Konrad Dybcio]

On 6/25/25 11:18 AM, Luca Weiss wrote:
> Add a dts for the PMIC used e.g. with SM7635 devices.
> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
>  arch/arm64/boot/dts/qcom/pmxr2230.dtsi | 63 ++++++++++++++++++++++++++++++++++
>  1 file changed, 63 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmxr2230.dtsi b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..a7650f3230c01422b76ef78e897e5e7ae2f20cc6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
> @@ -0,0 +1,63 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/spmi/spmi.h>
> +
> +/ {
> +	thermal-zones {
> +		pmxr2230_thermal: pmxr2230-thermal {
> +			polling-delay-passive = <100>;
> +
> +			thermal-sensors = <&pmxr2230_temp_alarm>;
> +
> +			trips {
> +				pmxr2230_trip0: trip0 {
> +					temperature = <95000>;
> +					hysteresis = <0>;
> +					type = "passive";
> +				};
> +
> +				pmxr2230_crit: pmxr2230-crit {

This name is "meh", please change to tripN

> +					temperature = <115000>;

Unless there's some actual electrical/physical SKU differences,
downstream lists 145C as critical for a PMIC carrying the same
name

with that:

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH 3/3] arm64: dts: qcom: Add PMXR2230 PMIC

[Luca Weiss]

On Wed Jun 25, 2025 at 3:20 PM CEST, Konrad Dybcio wrote:
> On 6/25/25 11:18 AM, Luca Weiss wrote:
>> Add a dts for the PMIC used e.g. with SM7635 devices.
>> 
>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>> ---
>>  arch/arm64/boot/dts/qcom/pmxr2230.dtsi | 63 ++++++++++++++++++++++++++++++++++
>>  1 file changed, 63 insertions(+)
>> 
>> diff --git a/arch/arm64/boot/dts/qcom/pmxr2230.dtsi b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
>> new file mode 100644
>> index 0000000000000000000000000000000000000000..a7650f3230c01422b76ef78e897e5e7ae2f20cc6
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
>> @@ -0,0 +1,63 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
>> + */
>> +
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/spmi/spmi.h>
>> +
>> +/ {
>> +	thermal-zones {
>> +		pmxr2230_thermal: pmxr2230-thermal {
>> +			polling-delay-passive = <100>;
>> +
>> +			thermal-sensors = <&pmxr2230_temp_alarm>;
>> +
>> +			trips {
>> +				pmxr2230_trip0: trip0 {
>> +					temperature = <95000>;
>> +					hysteresis = <0>;
>> +					type = "passive";
>> +				};
>> +
>> +				pmxr2230_crit: pmxr2230-crit {
>
> This name is "meh", please change to tripN
>
>> +					temperature = <115000>;
>
> Unless there's some actual electrical/physical SKU differences,
> downstream lists 145C as critical for a PMIC carrying the same
> name

[    0.085990] spmi-temp-alarm c400000.spmi:pmic@1:temp-alarm@a00: No ADC is configured and critical temperature 145000 mC is above the maximum stage 2 threshold of 125000 mC! Configuring stage 2 shutdown at 125000 mC.

Same for the PMIV0104:

[    0.086556] spmi-temp-alarm c400000.spmi:pmic@7:temp-alarm@a00: No ADC is configured and critical temperature 145000 mC is above the maximum stage 2 threshold of 125000 mC! Configuring stage 2 shutdown at 125000 mC.

What shall I do?

Regards
Luca


>
> with that:
>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
>
> Konrad

Re: [PATCH 3/3] arm64: dts: qcom: Add PMXR2230 PMIC

[Dmitry Baryshkov]

On Fri, Jun 27, 2025 at 02:54:20PM +0200, Luca Weiss wrote:
> On Wed Jun 25, 2025 at 3:20 PM CEST, Konrad Dybcio wrote:
> > On 6/25/25 11:18 AM, Luca Weiss wrote:
> >> Add a dts for the PMIC used e.g. with SM7635 devices.
> >> 
> >> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> >> ---
> >>  arch/arm64/boot/dts/qcom/pmxr2230.dtsi | 63 ++++++++++++++++++++++++++++++++++
> >>  1 file changed, 63 insertions(+)
> >> 
> >> diff --git a/arch/arm64/boot/dts/qcom/pmxr2230.dtsi b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
> >> new file mode 100644
> >> index 0000000000000000000000000000000000000000..a7650f3230c01422b76ef78e897e5e7ae2f20cc6
> >> --- /dev/null
> >> +++ b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
> >> @@ -0,0 +1,63 @@
> >> +// SPDX-License-Identifier: BSD-3-Clause
> >> +/*
> >> + * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
> >> + */
> >> +
> >> +#include <dt-bindings/interrupt-controller/irq.h>
> >> +#include <dt-bindings/spmi/spmi.h>
> >> +
> >> +/ {
> >> +	thermal-zones {
> >> +		pmxr2230_thermal: pmxr2230-thermal {
> >> +			polling-delay-passive = <100>;
> >> +
> >> +			thermal-sensors = <&pmxr2230_temp_alarm>;
> >> +
> >> +			trips {
> >> +				pmxr2230_trip0: trip0 {
> >> +					temperature = <95000>;
> >> +					hysteresis = <0>;
> >> +					type = "passive";
> >> +				};
> >> +
> >> +				pmxr2230_crit: pmxr2230-crit {
> >
> > This name is "meh", please change to tripN
> >
> >> +					temperature = <115000>;
> >
> > Unless there's some actual electrical/physical SKU differences,
> > downstream lists 145C as critical for a PMIC carrying the same
> > name
> 
> [    0.085990] spmi-temp-alarm c400000.spmi:pmic@1:temp-alarm@a00: No ADC is configured and critical temperature 145000 mC is above the maximum stage 2 threshold of 125000 mC! Configuring stage 2 shutdown at 125000 mC.
> 
> Same for the PMIV0104:
> 
> [    0.086556] spmi-temp-alarm c400000.spmi:pmic@7:temp-alarm@a00: No ADC is configured and critical temperature 145000 mC is above the maximum stage 2 threshold of 125000 mC! Configuring stage 2 shutdown at 125000 mC.
> 
> What shall I do?

I'd say, use 125°C or 124°C.

> 
> Regards
> Luca
> 
> 
> >
> > with that:
> >
> > Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
> >
> > Konrad
> 

-- 
With best wishes
Dmitry

Re: [PATCH 3/3] arm64: dts: qcom: Add PMXR2230 PMIC

[Konrad Dybcio]

On 6/27/25 2:54 PM, Luca Weiss wrote:
> On Wed Jun 25, 2025 at 3:20 PM CEST, Konrad Dybcio wrote:
>> On 6/25/25 11:18 AM, Luca Weiss wrote:
>>> Add a dts for the PMIC used e.g. with SM7635 devices.
>>>
>>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>>> ---
>>>  arch/arm64/boot/dts/qcom/pmxr2230.dtsi | 63 ++++++++++++++++++++++++++++++++++
>>>  1 file changed, 63 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/pmxr2230.dtsi b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
>>> new file mode 100644
>>> index 0000000000000000000000000000000000000000..a7650f3230c01422b76ef78e897e5e7ae2f20cc6
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/pmxr2230.dtsi
>>> @@ -0,0 +1,63 @@
>>> +// SPDX-License-Identifier: BSD-3-Clause
>>> +/*
>>> + * Copyright (c) 2025, Luca Weiss <luca.weiss@fairphone.com>
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/irq.h>
>>> +#include <dt-bindings/spmi/spmi.h>
>>> +
>>> +/ {
>>> +	thermal-zones {
>>> +		pmxr2230_thermal: pmxr2230-thermal {
>>> +			polling-delay-passive = <100>;
>>> +
>>> +			thermal-sensors = <&pmxr2230_temp_alarm>;
>>> +
>>> +			trips {
>>> +				pmxr2230_trip0: trip0 {
>>> +					temperature = <95000>;
>>> +					hysteresis = <0>;
>>> +					type = "passive";
>>> +				};
>>> +
>>> +				pmxr2230_crit: pmxr2230-crit {
>>
>> This name is "meh", please change to tripN
>>
>>> +					temperature = <115000>;
>>
>> Unless there's some actual electrical/physical SKU differences,
>> downstream lists 145C as critical for a PMIC carrying the same
>> name
> 
> [    0.085990] spmi-temp-alarm c400000.spmi:pmic@1:temp-alarm@a00: No ADC is configured and critical temperature 145000 mC is above the maximum stage 2 threshold of 125000 mC! Configuring stage 2 shutdown at 125000 mC.
> 
> Same for the PMIV0104:
> 
> [    0.086556] spmi-temp-alarm c400000.spmi:pmic@7:temp-alarm@a00: No ADC is configured and critical temperature 145000 mC is above the maximum stage 2 threshold of 125000 mC! Configuring stage 2 shutdown at 125000 mC.
> 
> What shall I do?

IIUC you'll need this series to achieve the full range

https://lore.kernel.org/linux-arm-msm/20250620001918.4090853-5-anjelique.melendez@oss.qualcomm.com/

Which makes me think the driver today may not be doing the greatest
thing in the world for this gen of PMICs..

We can either set it to 125 and leave a comment (which I assume is
sorta 'meh' because that's Linux specifics interfering with DT)
or we can wait until that series gets in

Personally, I wouldn't mind option 1 since we ultimately don't want
the PMIC to run at either 125 or 145 degC most of the time..

Konrad

Re: [PATCH 0/3] Add support for PMXR2230 PMIC

[Dmitry Baryshkov]

On Wed, Jun 25, 2025 at 11:18:36AM +0200, Luca Weiss wrote:
> The PMXR2230 PMIC is used in conjuction with SM7635. Add binding docs
> and the devicetree description for it.


Please use PM7550 instead.

> 
> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> ---
> Luca Weiss (3):
>       dt-bindings: leds: qcom,spmi-flash-led: Add PMXR2230
>       dt-bindings: mfd: qcom-spmi-pmic: Document PMXR2230 PMIC
>       arm64: dts: qcom: Add PMXR2230 PMIC
> 
>  .../bindings/leds/qcom,spmi-flash-led.yaml         |  1 +
>  .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml    |  1 +
>  arch/arm64/boot/dts/qcom/pmxr2230.dtsi             | 63 ++++++++++++++++++++++
>  3 files changed, 65 insertions(+)
> ---
> base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
> change-id: 20250620-sm7635-pmxr2230-ee55a86a8c2b
> 
> Best regards,
> -- 
> Luca Weiss <luca.weiss@fairphone.com>
> 

-- 
With best wishes
Dmitry

Re: [PATCH 0/3] Add support for PMXR2230 PMIC

[Luca Weiss]

On Wed Jun 25, 2025 at 4:25 PM CEST, Dmitry Baryshkov wrote:
> On Wed, Jun 25, 2025 at 11:18:36AM +0200, Luca Weiss wrote:
>> The PMXR2230 PMIC is used in conjuction with SM7635. Add binding docs
>> and the devicetree description for it.
>
>
> Please use PM7550 instead.

I'm happy to not follow downstream naming conventions if being told, but
do you have any details whether PMXR2230 == PM7550, or PM7550 is just
another SW-compatible PMIC as PMXR2230.

Also we already have qcom,pmxr2230-gpio upstream, so that would need to
get updated for the PM7550 name.

Regards
Luca

>
>> 
>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>> ---
>> Luca Weiss (3):
>>       dt-bindings: leds: qcom,spmi-flash-led: Add PMXR2230
>>       dt-bindings: mfd: qcom-spmi-pmic: Document PMXR2230 PMIC
>>       arm64: dts: qcom: Add PMXR2230 PMIC
>> 
>>  .../bindings/leds/qcom,spmi-flash-led.yaml         |  1 +
>>  .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml    |  1 +
>>  arch/arm64/boot/dts/qcom/pmxr2230.dtsi             | 63 ++++++++++++++++++++++
>>  3 files changed, 65 insertions(+)
>> ---
>> base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
>> change-id: 20250620-sm7635-pmxr2230-ee55a86a8c2b
>> 
>> Best regards,
>> -- 
>> Luca Weiss <luca.weiss@fairphone.com>
>> 

Re: [PATCH 0/3] Add support for PMXR2230 PMIC

[Dmitry Baryshkov]

On Wed, Jun 25, 2025 at 05:01:29PM +0200, Luca Weiss wrote:
> On Wed Jun 25, 2025 at 4:25 PM CEST, Dmitry Baryshkov wrote:
> > On Wed, Jun 25, 2025 at 11:18:36AM +0200, Luca Weiss wrote:
> >> The PMXR2230 PMIC is used in conjuction with SM7635. Add binding docs
> >> and the devicetree description for it.
> >
> >
> > Please use PM7550 instead.
> 
> I'm happy to not follow downstream naming conventions if being told, but
> do you have any details whether PMXR2230 == PM7550, or PM7550 is just
> another SW-compatible PMIC as PMXR2230.

It is PM7550.

> 
> Also we already have qcom,pmxr2230-gpio upstream, so that would need to
> get updated for the PM7550 name.

No, leave it be. We should not change existing compats for no reason.

> 
> Regards
> Luca
> 
> >
> >> 
> >> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> >> ---
> >> Luca Weiss (3):
> >>       dt-bindings: leds: qcom,spmi-flash-led: Add PMXR2230
> >>       dt-bindings: mfd: qcom-spmi-pmic: Document PMXR2230 PMIC
> >>       arm64: dts: qcom: Add PMXR2230 PMIC
> >> 
> >>  .../bindings/leds/qcom,spmi-flash-led.yaml         |  1 +
> >>  .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml    |  1 +
> >>  arch/arm64/boot/dts/qcom/pmxr2230.dtsi             | 63 ++++++++++++++++++++++
> >>  3 files changed, 65 insertions(+)
> >> ---
> >> base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
> >> change-id: 20250620-sm7635-pmxr2230-ee55a86a8c2b
> >> 
> >> Best regards,
> >> -- 
> >> Luca Weiss <luca.weiss@fairphone.com>
> >> 
> 

-- 
With best wishes
Dmitry

Re: [PATCH 0/3] Add support for PMXR2230 PMIC

[Luca Weiss]

On Wed Jun 25, 2025 at 11:03 PM CEST, Dmitry Baryshkov wrote:
> On Wed, Jun 25, 2025 at 05:01:29PM +0200, Luca Weiss wrote:
>> On Wed Jun 25, 2025 at 4:25 PM CEST, Dmitry Baryshkov wrote:
>> > On Wed, Jun 25, 2025 at 11:18:36AM +0200, Luca Weiss wrote:
>> >> The PMXR2230 PMIC is used in conjuction with SM7635. Add binding docs
>> >> and the devicetree description for it.
>> >
>> >
>> > Please use PM7550 instead.
>> 
>> I'm happy to not follow downstream naming conventions if being told, but
>> do you have any details whether PMXR2230 == PM7550, or PM7550 is just
>> another SW-compatible PMIC as PMXR2230.
>
> It is PM7550.

Ok, will update in v2.

>
>> 
>> Also we already have qcom,pmxr2230-gpio upstream, so that would need to
>> get updated for the PM7550 name.
>
> No, leave it be. We should not change existing compats for no reason.

The compatible is not used in upstream dts though, and cleaning up some
old naming for the PMIC would be good, no?

But I can leave it for now, and we can potentially take care of it
later.

Regards
Luca

>
>> 
>> Regards
>> Luca
>> 
>> >
>> >> 
>> >> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>> >> ---
>> >> Luca Weiss (3):
>> >>       dt-bindings: leds: qcom,spmi-flash-led: Add PMXR2230
>> >>       dt-bindings: mfd: qcom-spmi-pmic: Document PMXR2230 PMIC
>> >>       arm64: dts: qcom: Add PMXR2230 PMIC
>> >> 
>> >>  .../bindings/leds/qcom,spmi-flash-led.yaml         |  1 +
>> >>  .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml    |  1 +
>> >>  arch/arm64/boot/dts/qcom/pmxr2230.dtsi             | 63 ++++++++++++++++++++++
>> >>  3 files changed, 65 insertions(+)
>> >> ---
>> >> base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
>> >> change-id: 20250620-sm7635-pmxr2230-ee55a86a8c2b
>> >> 
>> >> Best regards,
>> >> -- 
>> >> Luca Weiss <luca.weiss@fairphone.com>
>> >> 
>> 

Re: [PATCH 0/3] Add support for PMXR2230 PMIC

[Dmitry Baryshkov]

On Fri, Jun 27, 2025 at 12:05:08PM +0200, Luca Weiss wrote:
> On Wed Jun 25, 2025 at 11:03 PM CEST, Dmitry Baryshkov wrote:
> > On Wed, Jun 25, 2025 at 05:01:29PM +0200, Luca Weiss wrote:
> >> On Wed Jun 25, 2025 at 4:25 PM CEST, Dmitry Baryshkov wrote:
> >> > On Wed, Jun 25, 2025 at 11:18:36AM +0200, Luca Weiss wrote:
> >> >> The PMXR2230 PMIC is used in conjuction with SM7635. Add binding docs
> >> >> and the devicetree description for it.
> >> >
> >> >
> >> > Please use PM7550 instead.
> >> 
> >> I'm happy to not follow downstream naming conventions if being told, but
> >> do you have any details whether PMXR2230 == PM7550, or PM7550 is just
> >> another SW-compatible PMIC as PMXR2230.
> >
> > It is PM7550.
> 
> Ok, will update in v2.
> 
> >
> >> 
> >> Also we already have qcom,pmxr2230-gpio upstream, so that would need to
> >> get updated for the PM7550 name.
> >
> > No, leave it be. We should not change existing compats for no reason.
> 
> The compatible is not used in upstream dts though, and cleaning up some
> old naming for the PMIC would be good, no?

Then, I'd say, just use pm7550 everywhere, making the qcom,pmxr2230-gpio
a one-off unused entry, which we might drop at some point.

> 
> But I can leave it for now, and we can potentially take care of it
> later.
> 
> Regards
> Luca
> 
> >
> >> 
> >> Regards
> >> Luca
> >> 
> >> >
> >> >> 
> >> >> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
> >> >> ---
> >> >> Luca Weiss (3):
> >> >>       dt-bindings: leds: qcom,spmi-flash-led: Add PMXR2230
> >> >>       dt-bindings: mfd: qcom-spmi-pmic: Document PMXR2230 PMIC
> >> >>       arm64: dts: qcom: Add PMXR2230 PMIC
> >> >> 
> >> >>  .../bindings/leds/qcom,spmi-flash-led.yaml         |  1 +
> >> >>  .../devicetree/bindings/mfd/qcom,spmi-pmic.yaml    |  1 +
> >> >>  arch/arm64/boot/dts/qcom/pmxr2230.dtsi             | 63 ++++++++++++++++++++++
> >> >>  3 files changed, 65 insertions(+)
> >> >> ---
> >> >> base-commit: 19272b37aa4f83ca52bdf9c16d5d81bdd1354494
> >> >> change-id: 20250620-sm7635-pmxr2230-ee55a86a8c2b
> >> >> 
> >> >> Best regards,
> >> >> -- 
> >> >> Luca Weiss <luca.weiss@fairphone.com>
> >> >> 
> >> 
> 

-- 
With best wishes
Dmitry