[PATCH v2 1/3] arm64: dts: qcom: sa8155p-adp: Make compatible the first property

[PATCH v2 1/3] arm64: dts: qcom: sa8155p-adp: Make compatible the first property

[Andrew Halaney]

As stated at the below link in another review, compatible is always the
first property.

Follow suit here to avoid copying incorrectly in the future.

Link: https://lore.kernel.org/netdev/20230331215804.783439-1-ahalaney@redhat.com/T/#ma76b4116bbb9e49ee4bcf699e40935d80965b3f3
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v1:
    * None

 arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 339fea522509..029b23198b3a 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -352,19 +352,18 @@ &ethernet {
 	max-speed = <1000>;
 
 	mdio {
+		compatible = "snps,dwmac-mdio";
 		#address-cells = <0x1>;
 		#size-cells = <0x0>;
 
-		compatible = "snps,dwmac-mdio";
-
 		/* Micrel KSZ9031RNZ PHY */
 		rgmii_phy: phy@7 {
+			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0x7>;
 
 			interrupt-parent = <&tlmm>;
 			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
 			device_type = "ethernet-phy";
-			compatible = "ethernet-phy-ieee802.3-c22";
 		};
 	};
 };
-- 
2.39.2

[PATCH v2 2/3] arm64: dts: qcom: sa8155p-adp: Make -cells decimal

[Andrew Halaney]

The property logically makes sense in decimal, and is the standard used
elsewhere.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v1:
    * New patch (Konrad)

 arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 029b23198b3a..ac52a8dfeba1 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -353,8 +353,8 @@ &ethernet {
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
-		#address-cells = <0x1>;
-		#size-cells = <0x0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
 
 		/* Micrel KSZ9031RNZ PHY */
 		rgmii_phy: phy@7 {
-- 
2.39.2

Re: [PATCH v2 2/3] arm64: dts: qcom: sa8155p-adp: Make -cells decimal

[Konrad Dybcio]

On 13.04.2023 21:40, Andrew Halaney wrote:
> The property logically makes sense in decimal, and is the standard used
> elsewhere.
> 
> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> 
> Changes since v1:
>     * New patch (Konrad)
> 
>  arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index 029b23198b3a..ac52a8dfeba1 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -353,8 +353,8 @@ &ethernet {
>  
>  	mdio {
>  		compatible = "snps,dwmac-mdio";
> -		#address-cells = <0x1>;
> -		#size-cells = <0x0>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
>  
>  		/* Micrel KSZ9031RNZ PHY */
>  		rgmii_phy: phy@7 {

[PATCH v2 3/3] arm64: dts: qcom: sa8155p-adp: Remove unneeded rgmii_phy information

[Andrew Halaney]

Using interrupts-extended already indicates what the interrupt-parent
is, so drop the explicit interrupt-parent.

The comment about this being the phy-intr is not helpful either, since
this is the only interrupt in the phy node.

Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---

Changes since v1:
    * New patch (Konrad)

 arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index ac52a8dfeba1..b65e0203d783 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -361,8 +361,7 @@ rgmii_phy: phy@7 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <0x7>;
 
-			interrupt-parent = <&tlmm>;
-			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
+			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>;
 			device_type = "ethernet-phy";
 		};
 	};
-- 
2.39.2

Re: [PATCH v2 3/3] arm64: dts: qcom: sa8155p-adp: Remove unneeded rgmii_phy information

[Konrad Dybcio]

On 13.04.2023 21:40, Andrew Halaney wrote:
> Using interrupts-extended already indicates what the interrupt-parent
> is, so drop the explicit interrupt-parent.
> 
> The comment about this being the phy-intr is not helpful either, since
> this is the only interrupt in the phy node.
> 
> Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> 
> Changes since v1:
>     * New patch (Konrad)
> 
>  arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index ac52a8dfeba1..b65e0203d783 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -361,8 +361,7 @@ rgmii_phy: phy@7 {
>  			compatible = "ethernet-phy-ieee802.3-c22";
>  			reg = <0x7>;
>  
> -			interrupt-parent = <&tlmm>;
> -			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
> +			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>;
>  			device_type = "ethernet-phy";
>  		};
>  	};

Re: [PATCH v2 1/3] arm64: dts: qcom: sa8155p-adp: Make compatible the first property

[Konrad Dybcio]

On 13.04.2023 21:40, Andrew Halaney wrote:
> As stated at the below link in another review, compatible is always the
> first property.
> 
> Follow suit here to avoid copying incorrectly in the future.
> 
> Link: https://lore.kernel.org/netdev/20230331215804.783439-1-ahalaney@redhat.com/T/#ma76b4116bbb9e49ee4bcf699e40935d80965b3f3
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> 
> Changes since v1:
>     * None
> 
>  arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 5 ++---
>  1 file changed, 2 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> index 339fea522509..029b23198b3a 100644
> --- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> +++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
> @@ -352,19 +352,18 @@ &ethernet {
>  	max-speed = <1000>;
>  
>  	mdio {
> +		compatible = "snps,dwmac-mdio";
>  		#address-cells = <0x1>;
>  		#size-cells = <0x0>;
>  
> -		compatible = "snps,dwmac-mdio";
> -
>  		/* Micrel KSZ9031RNZ PHY */
>  		rgmii_phy: phy@7 {
> +			compatible = "ethernet-phy-ieee802.3-c22";
>  			reg = <0x7>;
>  
>  			interrupt-parent = <&tlmm>;
>  			interrupts-extended = <&tlmm 124 IRQ_TYPE_EDGE_FALLING>; /* phy intr */
>  			device_type = "ethernet-phy";
> -			compatible = "ethernet-phy-ieee802.3-c22";
>  		};
>  	};
>  };