From: David Heidelberg <david@ixit.cz>
To: Rinat Muhamedgaliev <rinat.muhamedgaliev@gmail.com>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Sebastian Reichel <sre@kernel.org>
Cc: "Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Pali Rohár" <pali@kernel.org>, "Andrew F . Davis" <afd@ti.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 3/3] arm64: dts: qcom: sdm845-oneplus: use generic fuel gauge compatible
Date: Thu, 10 Sep 2026 02:12:15 +0200 [thread overview]
Message-ID: <bdf4928c-b1e7-4832-adec-83fec795e4c2@ixit.cz> (raw)
In-Reply-To: <20260909234744.1177153-4-rinat.muhamedgaliev@gmail.com>
On 10/09/2026 01:47, Rinat Muhamedgaliev wrote:
> OnePlus 6 and OnePlus 6T battery packs may contain either a TI
> bq27411 or bq27541 fuel gauge. Use the generic ti,bq27xxx compatible
> so the driver can select the register map from DeviceType at probe
> time.
>
> Tested on OnePlus 6T (fajita) with a bq27541 (DeviceType 0x0541):
> after booting the new kernel, the battery reported 4.360 V, 100% state
> of charge, 27.8 C, and Full status.
>
> Fixes: 12dfb002ca01 ("arm64: dts: qcom: sdm845-oneplus-*: add fuel gauge")
>
> Signed-off-by: Rinat Muhamedgaliev <rinat.muhamedgaliev@gmail.com>
> ---
> arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 ++--
> arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts | 2 +-
> arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts | 2 +-
> 3 files changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> index 948a0dd..8c5cd94 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
> @@ -790,8 +790,8 @@ &i2c10 {
> status = "okay";
> clock-frequency = <100000>;
>
> - bq27441_fg: bq27441-battery@55 {
> - compatible = "ti,bq27411";
> + bq27xxx_fg: fuel-gauge@55 {
> + compatible = "ti,bq27xxx";
For new driver this would make definitely sense, but since we need backwards
compatibility (someone use new device-tree, but the old driver) you want to do
compatible = "ti,bq27xxx", "ti,bq27411";
here. The 27xxx will get evaluated first, if not available fallback to existing
driver.
> status = "okay";
> reg = <0x55>;
> };
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
> index 5f01115..cf40842 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
> @@ -44,7 +44,7 @@ main_cam_ois: main-cam-ois-regulator {
> };
> };
>
> -&bq27441_fg {
> +&bq27xxx_fg {
> monitored-battery = <&battery>;
> };
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
> index 7ffcad2..9436027 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
> @@ -67,7 +67,7 @@ tfa9894_codec: tfa9894@34 {
>
> };
>
> -&bq27441_fg {
> +&bq27xxx_fg {
> monitored-battery = <&battery>;
> };
>
next prev parent reply other threads:[~2026-09-10 0:12 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-26 23:38 [PATCH] arm64: dts: qcom: sdm845-oneplus: fix fuel gauge compatible Rinat Muhamedgaliev
2026-08-27 21:43 ` Krzysztof Kozlowski
2026-08-28 10:05 ` Konrad Dybcio
2026-08-29 21:03 ` Rinat Muhamedgaliev
2026-09-08 13:15 ` Konrad Dybcio
2026-08-29 20:52 ` [PATCH v2] " Rinat Muhamedgaliev
2026-09-09 23:47 ` [PATCH v3 0/3] bq27xxx: support interchangeable OnePlus 6/6T fuel gauges Rinat Muhamedgaliev
2026-09-09 23:47 ` [PATCH v3 1/3] dt-bindings: power: supply: bq27xxx: add generic compatible Rinat Muhamedgaliev
2026-09-11 8:20 ` Krzysztof Kozlowski
2026-09-09 23:47 ` [PATCH v3 2/3] power: supply: bq27xxx: autodetect bq27411 and bq27541 Rinat Muhamedgaliev
2026-09-10 0:09 ` David Heidelberg
2026-09-10 7:42 ` Konrad Dybcio
2026-09-09 23:47 ` [PATCH v3 3/3] arm64: dts: qcom: sdm845-oneplus: use generic fuel gauge compatible Rinat Muhamedgaliev
2026-09-10 0:12 ` David Heidelberg [this message]
2026-09-11 8:21 ` Krzysztof Kozlowski
2026-09-11 13:37 ` Andrew Davis
2026-09-11 18:41 ` David Heidelberg
2026-09-11 20:00 ` David Heidelberg
2026-09-12 7:47 ` Krzysztof Kozlowski
2026-09-10 0:08 ` [PATCH v3 0/3] bq27xxx: support interchangeable OnePlus 6/6T fuel gauges David Heidelberg
2026-09-07 8:38 ` [PATCH] arm64: dts: qcom: sdm845-oneplus: fix fuel gauge compatible David Heidelberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bdf4928c-b1e7-4832-adec-83fec795e4c2@ixit.cz \
--to=david@ixit.cz \
--cc=afd@ti.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=pali@kernel.org \
--cc=rinat.muhamedgaliev@gmail.com \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).