From: Jonathan Cameron <jic23@kernel.org>
To: Peter Rosin <peda@axentia.se>, linux-kernel@vger.kernel.org
Cc: Wolfram Sang <wsa@the-dreams.de>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Jonathan Corbet <corbet@lwn.net>, Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-i2c@vger.kernel.org, devicetree@vger.kernel.org,
linux-iio@vger.kernel.org, linux-doc@vger.kernel.org
Subject: Re: [PATCH v6 5/9] iio: multiplexer: new iio category and iio-mux driver
Date: Sat, 31 Dec 2016 16:21:32 +0000 [thread overview]
Message-ID: <be1599ee-c5ea-02bf-e77c-59f048e5e025@kernel.org> (raw)
In-Reply-To: <1480493823-21462-6-git-send-email-peda@axentia.se>
On 30/11/16 08:16, Peter Rosin wrote:
> When a multiplexer changes how an iio device behaves (for example
> by feeding different signals to an ADC), this driver can be used
> to create one virtual iio channel for each multiplexer state.
>
> Depends on the generic multiplexer subsystem.
>
> Cache any ext_info values from the parent iio channel, creating a private
> copy of the ext_info attributes for each multiplexer state/channel.
>
> Signed-off-by: Peter Rosin <peda@axentia.se>
Other than binding naming, I'm happy with this - so pending that changing...
Reviewed-by: Jonathan Cameron <jic23@kernel.org>
If it makes sense I can obviously take this via IIO once the core is in
place.
Jonathan
> ---
> MAINTAINERS | 1 +
> drivers/iio/Kconfig | 1 +
> drivers/iio/Makefile | 1 +
> drivers/iio/multiplexer/Kconfig | 18 ++
> drivers/iio/multiplexer/Makefile | 6 +
> drivers/iio/multiplexer/iio-mux.c | 456 ++++++++++++++++++++++++++++++++++++++
> 6 files changed, 483 insertions(+)
> create mode 100644 drivers/iio/multiplexer/Kconfig
> create mode 100644 drivers/iio/multiplexer/Makefile
> create mode 100644 drivers/iio/multiplexer/iio-mux.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 77045ae15865..16490fbd1721 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6239,6 +6239,7 @@ M: Peter Rosin <peda@axentia.se>
> L: linux-iio@vger.kernel.org
> S: Maintained
> F: Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
> +F: drivers/iio/multiplexer/iio-mux.c
>
> IIO SUBSYSTEM AND DRIVERS
> M: Jonathan Cameron <jic23@kernel.org>
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index a918270d6f54..b3c8c6ef0dff 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -83,6 +83,7 @@ source "drivers/iio/humidity/Kconfig"
> source "drivers/iio/imu/Kconfig"
> source "drivers/iio/light/Kconfig"
> source "drivers/iio/magnetometer/Kconfig"
> +source "drivers/iio/multiplexer/Kconfig"
> source "drivers/iio/orientation/Kconfig"
> if IIO_TRIGGER
> source "drivers/iio/trigger/Kconfig"
> diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
> index 33fa4026f92c..93c769cd99bf 100644
> --- a/drivers/iio/Makefile
> +++ b/drivers/iio/Makefile
> @@ -28,6 +28,7 @@ obj-y += humidity/
> obj-y += imu/
> obj-y += light/
> obj-y += magnetometer/
> +obj-y += multiplexer/
> obj-y += orientation/
> obj-y += potentiometer/
> obj-y += potentiostat/
> diff --git a/drivers/iio/multiplexer/Kconfig b/drivers/iio/multiplexer/Kconfig
> new file mode 100644
> index 000000000000..70a044510686
> --- /dev/null
> +++ b/drivers/iio/multiplexer/Kconfig
> @@ -0,0 +1,18 @@
> +#
> +# Multiplexer drivers
> +#
> +# When adding new entries keep the list in alphabetical order
> +
> +menu "Multiplexers"
> +
> +config IIO_MUX
> + tristate "IIO multiplexer driver"
> + select MULTIPLEXER
> + depends on OF
> + help
> + Say yes here to build support for the IIO multiplexer.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called iio-mux.
> +
> +endmenu
> diff --git a/drivers/iio/multiplexer/Makefile b/drivers/iio/multiplexer/Makefile
> new file mode 100644
> index 000000000000..68be3c4abd07
> --- /dev/null
> +++ b/drivers/iio/multiplexer/Makefile
> @@ -0,0 +1,6 @@
> +#
> +# Makefile for industrial I/O multiplexer drivers
> +#
> +
> +# When adding new entries keep the list in alphabetical order
> +obj-$(CONFIG_IIO_MUX) += iio-mux.o
> diff --git a/drivers/iio/multiplexer/iio-mux.c b/drivers/iio/multiplexer/iio-mux.c
> new file mode 100644
> index 000000000000..92dfee2dfed1
> --- /dev/null
> +++ b/drivers/iio/multiplexer/iio-mux.c
> @@ -0,0 +1,456 @@
> +/*
> + * IIO multiplexer driver
> + *
> + * Copyright (C) 2016 Axentia Technologies AB
> + *
> + * Author: Peter Rosin <peda@axentia.se>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/err.h>
> +#include <linux/iio/consumer.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/mux.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +
> +struct mux_ext_info_cache {
> + char *data;
> + size_t size;
> +};
> +
> +struct mux_child {
> + struct mux_ext_info_cache *ext_info_cache;
> +};
> +
> +struct mux {
> + int cached_state;
> + struct mux_control *control;
> + struct iio_channel *parent;
> + struct iio_dev *indio_dev;
> + struct iio_chan_spec *chan;
> + struct iio_chan_spec_ext_info *ext_info;
> + struct mux_child *child;
> +};
> +
> +static int iio_mux_select(struct mux *mux, int idx)
> +{
> + struct mux_child *child = &mux->child[idx];
> + struct iio_chan_spec const *chan = &mux->chan[idx];
> + int ret;
> + int i;
> +
> + ret = mux_control_select(mux->control, chan->channel);
> + if (ret < 0) {
> + mux->cached_state = -1;
> + return ret;
> + }
> +
> + if (mux->cached_state == chan->channel)
> + return 0;
> +
> + if (chan->ext_info) {
> + for (i = 0; chan->ext_info[i].name; ++i) {
> + const char *attr = chan->ext_info[i].name;
> + struct mux_ext_info_cache *cache;
> +
> + cache = &child->ext_info_cache[i];
> +
> + if (cache->size < 0)
> + continue;
> +
> + ret = iio_write_channel_ext_info(mux->parent, attr,
> + cache->data,
> + cache->size);
> +
> + if (ret < 0) {
> + mux_control_deselect(mux->control);
> + mux->cached_state = -1;
> + return ret;
> + }
> + }
> + }
> + mux->cached_state = chan->channel;
> +
> + return 0;
> +}
> +
> +static void iio_mux_deselect(struct mux *mux)
> +{
> + mux_control_deselect(mux->control);
> +}
> +
> +static int mux_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct mux *mux = iio_priv(indio_dev);
> + int idx = chan - mux->chan;
> + int ret;
> +
> + ret = iio_mux_select(mux, idx);
> + if (ret < 0)
> + return ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + ret = iio_read_channel_raw(mux->parent, val);
> + break;
> +
> + case IIO_CHAN_INFO_SCALE:
> + ret = iio_read_channel_scale(mux->parent, val, val2);
> + break;
> +
> + default:
> + ret = -EINVAL;
> + }
> +
> + iio_mux_deselect(mux);
> +
> + return ret;
> +}
> +
> +static int mux_read_avail(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + const int **vals, int *type, int *length,
> + long mask)
> +{
> + struct mux *mux = iio_priv(indio_dev);
> + int idx = chan - mux->chan;
> + int ret;
> +
> + ret = iio_mux_select(mux, idx);
> + if (ret < 0)
> + return ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + *type = IIO_VAL_INT;
> + ret = iio_read_avail_channel_raw(mux->parent, vals, length);
> + break;
> +
> + default:
> + ret = -EINVAL;
> + }
> +
> + iio_mux_deselect(mux);
> +
> + return ret;
> +}
> +
> +static int mux_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct mux *mux = iio_priv(indio_dev);
> + int idx = chan - mux->chan;
> + int ret;
> +
> + ret = iio_mux_select(mux, idx);
> + if (ret < 0)
> + return ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + ret = iio_write_channel_raw(mux->parent, val);
> + break;
> +
> + default:
> + ret = -EINVAL;
> + }
> +
> + iio_mux_deselect(mux);
> +
> + return ret;
> +}
> +
> +static const struct iio_info mux_info = {
> + .read_raw = mux_read_raw,
> + .read_avail = mux_read_avail,
> + .write_raw = mux_write_raw,
> + .driver_module = THIS_MODULE,
> +};
> +
> +static ssize_t mux_read_ext_info(struct iio_dev *indio_dev, uintptr_t private,
> + struct iio_chan_spec const *chan, char *buf)
> +{
> + struct mux *mux = iio_priv(indio_dev);
> + int idx = chan - mux->chan;
> + ssize_t ret;
> +
> + ret = iio_mux_select(mux, idx);
> + if (ret < 0)
> + return ret;
> +
> + ret = iio_read_channel_ext_info(mux->parent,
> + mux->ext_info[private].name,
> + buf);
> +
> + iio_mux_deselect(mux);
> +
> + return ret;
> +}
> +
> +static ssize_t mux_write_ext_info(struct iio_dev *indio_dev, uintptr_t private,
> + struct iio_chan_spec const *chan,
> + const char *buf, size_t len)
> +{
> + struct device *dev = indio_dev->dev.parent;
> + struct mux *mux = iio_priv(indio_dev);
> + int idx = chan - mux->chan;
> + char *new;
> + ssize_t ret;
> +
> + ret = iio_mux_select(mux, idx);
> + if (ret < 0)
> + return ret;
> +
> + new = devm_kmemdup(dev, buf, len + 1, GFP_KERNEL);
> + if (!new) {
> + iio_mux_deselect(mux);
> + return -ENOMEM;
> + }
> +
> + new[len] = 0;
> +
> + ret = iio_write_channel_ext_info(mux->parent,
> + mux->ext_info[private].name,
> + buf, len);
> + if (ret < 0) {
> + iio_mux_deselect(mux);
> + devm_kfree(dev, new);
> + return ret;
> + }
> +
> + devm_kfree(dev, mux->child[idx].ext_info_cache[private].data);
> + mux->child[idx].ext_info_cache[private].data = new;
> + mux->child[idx].ext_info_cache[private].size = len;
> +
> + iio_mux_deselect(mux);
> +
> + return ret;
> +}
> +
> +static int mux_configure_channel(struct device *dev, struct mux *mux,
> + u32 state, const char *label, int idx)
> +{
> + struct mux_child *child = &mux->child[idx];
> + struct iio_chan_spec *chan = &mux->chan[idx];
> + struct iio_chan_spec const *pchan = mux->parent->channel;
> + char *page = NULL;
> + int num_ext_info;
> + int i;
> + int ret;
> +
> + chan->indexed = 1;
> + chan->output = pchan->output;
> + chan->datasheet_name = label;
> + chan->ext_info = mux->ext_info;
> +
> + ret = iio_get_channel_type(mux->parent, &chan->type);
> + if (ret < 0) {
> + dev_err(dev, "failed to get parent channel type\n");
> + return ret;
> + }
> +
> + if (iio_channel_has_info(pchan, IIO_CHAN_INFO_RAW))
> + chan->info_mask_separate |= BIT(IIO_CHAN_INFO_RAW);
> + if (iio_channel_has_info(pchan, IIO_CHAN_INFO_SCALE))
> + chan->info_mask_separate |= BIT(IIO_CHAN_INFO_SCALE);
> +
> + if (iio_channel_has_available(pchan, IIO_CHAN_INFO_RAW))
> + chan->info_mask_separate_available |= BIT(IIO_CHAN_INFO_RAW);
> +
> + if (state >= mux->control->states) {
> + dev_err(dev, "too many channels\n");
> + return -EINVAL;
> + }
> +
> + chan->channel = state;
> +
> + num_ext_info = iio_get_channel_ext_info_count(mux->parent);
> + if (num_ext_info) {
> + page = devm_kzalloc(dev, PAGE_SIZE, GFP_KERNEL);
> + if (!page)
> + return -ENOMEM;
> + }
> + child->ext_info_cache = devm_kzalloc(dev,
> + sizeof(*child->ext_info_cache) *
> + num_ext_info, GFP_KERNEL);
> + for (i = 0; i < num_ext_info; ++i) {
> + child->ext_info_cache[i].size = -1;
> +
> + if (!pchan->ext_info[i].write)
> + continue;
> + if (!pchan->ext_info[i].read)
> + continue;
> +
> + ret = iio_read_channel_ext_info(mux->parent,
> + mux->ext_info[i].name,
> + page);
> + if (ret < 0) {
> + dev_err(dev, "failed to get ext_info '%s'\n",
> + pchan->ext_info[i].name);
> + return ret;
> + }
> + if (ret >= PAGE_SIZE) {
> + dev_err(dev, "too large ext_info '%s'\n",
> + pchan->ext_info[i].name);
> + return -EINVAL;
> + }
> +
> + child->ext_info_cache[i].data = devm_kmemdup(dev, page, ret + 1,
> + GFP_KERNEL);
> + child->ext_info_cache[i].data[ret] = 0;
> + child->ext_info_cache[i].size = ret;
> + }
> +
> + if (page)
> + devm_kfree(dev, page);
> +
> + return 0;
> +}
> +
> +/*
> + * Same as of_property_for_each_string(), but also keeps track of the
> + * index of each string.
> + */
> +#define of_property_for_each_string_index(np, propname, prop, s, i) \
> + for (prop = of_find_property(np, propname, NULL), \
> + s = of_prop_next_string(prop, NULL), \
> + i = 0; \
> + s; \
> + s = of_prop_next_string(prop, s), \
> + i++)
> +
> +static int mux_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *np = pdev->dev.of_node;
> + struct iio_dev *indio_dev;
> + struct iio_channel *parent;
> + struct mux *mux;
> + struct property *prop;
> + const char *label;
> + u32 state;
> + int sizeof_ext_info;
> + int children;
> + int sizeof_priv;
> + int i;
> + int ret;
> +
> + if (!np)
> + return -ENODEV;
> +
> + parent = devm_iio_channel_get(dev, "parent");
> + if (IS_ERR(parent)) {
> + if (PTR_ERR(parent) != -EPROBE_DEFER)
> + dev_err(dev, "failed to get parent channel\n");
> + return PTR_ERR(parent);
> + }
> +
> + sizeof_ext_info = iio_get_channel_ext_info_count(parent);
> + if (sizeof_ext_info) {
> + sizeof_ext_info += 1; /* one extra entry for the sentinel */
> + sizeof_ext_info *= sizeof(*mux->ext_info);
> + }
> +
> + children = 0;
> + of_property_for_each_string(np, "channels", prop, label) {
> + if (*label)
> + children++;
> + }
> + if (children <= 0) {
> + dev_err(dev, "not even a single child\n");
> + return -EINVAL;
> + }
> +
> + sizeof_priv = sizeof(*mux);
> + sizeof_priv += sizeof(*mux->child) * children;
> + sizeof_priv += sizeof(*mux->chan) * children;
> + sizeof_priv += sizeof_ext_info;
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof_priv);
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + mux = iio_priv(indio_dev);
> + mux->child = (struct mux_child *)(mux + 1);
> + mux->chan = (struct iio_chan_spec *)(mux->child + children);
> +
> + platform_set_drvdata(pdev, indio_dev);
> +
> + mux->parent = parent;
> + mux->cached_state = -1;
> +
> + indio_dev->name = dev_name(dev);
> + indio_dev->dev.parent = dev;
> + indio_dev->info = &mux_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = mux->chan;
> + indio_dev->num_channels = children;
> + if (sizeof_ext_info) {
> + mux->ext_info = devm_kmemdup(dev,
> + parent->channel->ext_info,
> + sizeof_ext_info, GFP_KERNEL);
> + if (!mux->ext_info)
> + return -ENOMEM;
> +
> + for (i = 0; mux->ext_info[i].name; ++i) {
> + if (parent->channel->ext_info[i].read)
> + mux->ext_info[i].read = mux_read_ext_info;
> + if (parent->channel->ext_info[i].write)
> + mux->ext_info[i].write = mux_write_ext_info;
> + mux->ext_info[i].private = i;
> + }
> + }
> +
> + mux->control = devm_mux_control_get(dev, NULL);
> + if (IS_ERR(mux->control)) {
> + if (PTR_ERR(mux->control) != -EPROBE_DEFER)
> + dev_err(dev, "failed to get control-mux\n");
> + return PTR_ERR(mux->control);
> + }
> +
> + i = 0;
> + of_property_for_each_string_index(np, "channels", prop, label, state) {
> + if (!*label)
> + continue;
> +
> + ret = mux_configure_channel(dev, mux, state, label, i++);
> + if (ret < 0)
> + return ret;
> + }
> +
> + ret = devm_iio_device_register(dev, indio_dev);
> + if (ret) {
> + dev_err(dev, "failed to register iio device\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mux_match[] = {
> + { .compatible = "iio-mux" },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mux_match);
> +
> +static struct platform_driver mux_driver = {
> + .probe = mux_probe,
> + .driver = {
> + .name = "iio-mux",
> + .of_match_table = mux_match,
> + },
> +};
> +module_platform_driver(mux_driver);
> +
> +MODULE_DESCRIPTION("IIO multiplexer driver");
> +MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
> +MODULE_LICENSE("GPL v2");
>
next prev parent reply other threads:[~2016-12-31 16:21 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-30 8:16 [PATCH v6 0/9] mux controller abstraction and iio/i2c muxes Peter Rosin
2016-11-30 8:16 ` [PATCH v6 2/9] misc: minimal mux subsystem and gpio-based mux controller Peter Rosin
2016-12-31 16:19 ` Jonathan Cameron
2017-01-02 9:14 ` Peter Rosin
[not found] ` <7080f03c-0ee3-13b2-b242-21f80052e479-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
2017-01-02 9:20 ` Jonathan Cameron
2016-11-30 8:16 ` [PATCH v6 3/9] iio: inkern: api for manipulating ext_info of iio channels Peter Rosin
[not found] ` <1480493823-21462-4-git-send-email-peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
2016-12-31 15:51 ` Jonathan Cameron
2016-11-30 8:16 ` [PATCH v6 4/9] dt-bindings: iio: iio-mux: document iio-mux bindings Peter Rosin
2016-11-30 8:52 ` Peter Rosin
2016-11-30 8:57 ` Peter Rosin
2016-12-05 23:26 ` Rob Herring
2016-12-06 9:18 ` Peter Rosin
[not found] ` <ea58cfe1-88ed-f215-59df-e9ffba485eaa-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
2016-12-10 18:21 ` Jonathan Cameron
[not found] ` <d2726499-4034-8d5d-4cff-61da86af5add-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
2016-12-12 12:18 ` Peter Rosin
2016-12-31 16:01 ` Jonathan Cameron
2016-11-30 8:16 ` [PATCH v6 5/9] iio: multiplexer: new iio category and iio-mux driver Peter Rosin
2016-12-31 16:21 ` Jonathan Cameron [this message]
2016-11-30 8:17 ` [PATCH v6 6/9] dt-bindings: i2c: i2c-mux-simple: document i2c-mux-simple bindings Peter Rosin
[not found] ` <1480493823-21462-1-git-send-email-peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
2016-11-30 8:16 ` [PATCH v6 1/9] dt-bindings: document devicetree bindings for mux-controllers and mux-gpio Peter Rosin
2016-12-31 16:10 ` Jonathan Cameron
2016-11-30 8:17 ` [PATCH v6 7/9] i2c: i2c-mux-simple: new driver Peter Rosin
[not found] ` <1480493823-21462-8-git-send-email-peda-koto5C5qi+TLoDKTGw+V6w@public.gmane.org>
2017-01-01 10:31 ` Jonathan Cameron
2017-01-01 15:38 ` Andy Shevchenko
[not found] ` <CAHp75Vc2uYhaYJu_eU-uBq_PZrUgaoNt8sxpuRF8eEEs2kPUwg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-01-02 15:30 ` Peter Rosin
2016-11-30 8:17 ` [PATCH v6 8/9] dt-bindings: mux-adg792a: document devicetree bindings for ADG792A/G mux Peter Rosin
2017-01-01 11:00 ` Jonathan Cameron
2017-01-02 16:01 ` Peter Rosin
2017-01-02 18:05 ` Jonathan Cameron
2017-01-02 20:47 ` Peter Rosin
2017-01-02 21:13 ` Jonathan Cameron
[not found] ` <90A8A4B3-670B-4409-B7AB-47BF4B2ABDDA-tko9wxEg+fIOOJlXag/Snyp2UmYkHbXO@public.gmane.org>
2017-01-03 6:44 ` Peter Rosin
2016-11-30 8:17 ` [PATCH v6 9/9] misc: mux-adg792a: add mux controller driver for ADG792A/G Peter Rosin
2017-01-01 11:24 ` Jonathan Cameron
2017-01-02 11:00 ` Peter Rosin
2017-01-02 18:08 ` Jonathan Cameron
2017-01-01 11:28 ` [PATCH v6 0/9] mux controller abstraction and iio/i2c muxes Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=be1599ee-c5ea-02bf-e77c-59f048e5e025@kernel.org \
--to=jic23@kernel.org \
--cc=arnd@arndb.de \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-doc@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=peda@axentia.se \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).