* [PATCH v3 0/2] add support to STM LSM6DS3-LSM6DSM 6-axis Mems sensor
@ 2016-12-10 9:02 Lorenzo Bianconi
[not found] ` <20161210090218.4609-1-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>
0 siblings, 1 reply; 5+ messages in thread
From: Lorenzo Bianconi @ 2016-12-10 9:02 UTC (permalink / raw)
To: jic23-DgEjT+Ai2ygdnm+yROfE0A
Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, lorenzo.bianconi-qxv4g6HH51o
Changes since v2:
- improve code documentation
- improve code readability
- use spi_write() instead of spi_sync_transfer() in st_lsm6dsx_spi_write()
- use SMBus commands instead of I2C protocol
- use fifo_lock mutex to prevent concurrent access to hw FIFO instead of
disabling/enabling irq line in st_lsm6dsx_flush_fifo()
- rename ring occurrences in buffer ones
Changes since v1:
- add sw fifo support
- drop trigger dependency
- use iio_claim_direct_mode() routine instead of grabbing the mutex directly
- use more unique prefix for all defines
- use info_mask_shared_by_all element for sampling_frequency
- use devm_iio_* routines
- use of_match_ptr instead of access directly to of_match_table
- fix device tree binding
- rename st_lsm6dsx_dev in st_lsm6dsx_hw
- cosmetics
Lorenzo Bianconi (2):
iio: imu: add support to lsm6dsx driver
Documentation: dt: iio: add st_lsm6dsx sensor device binding
.../devicetree/bindings/iio/imu/st_lsm6dsx.txt | 24 +
drivers/iio/imu/Kconfig | 1 +
drivers/iio/imu/Makefile | 2 +
drivers/iio/imu/st_lsm6dsx/Kconfig | 23 +
drivers/iio/imu/st_lsm6dsx/Makefile | 5 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 133 +++++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 437 ++++++++++++++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 655 +++++++++++++++++++++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 88 +++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 126 ++++
10 files changed, 1494 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
create mode 100644 drivers/iio/imu/st_lsm6dsx/Kconfig
create mode 100644 drivers/iio/imu/st_lsm6dsx/Makefile
create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 5+ messages in thread[parent not found: <20161210090218.4609-1-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>]
* [PATCH v3 1/2] iio: imu: add support to lsm6dsx driver [not found] ` <20161210090218.4609-1-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> @ 2016-12-10 9:02 ` Lorenzo Bianconi [not found] ` <20161210090218.4609-2-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> 2016-12-10 9:02 ` [PATCH v3 2/2] Documentation: dt: iio: add st_lsm6dsx sensor device binding Lorenzo Bianconi 1 sibling, 1 reply; 5+ messages in thread From: Lorenzo Bianconi @ 2016-12-10 9:02 UTC (permalink / raw) To: jic23-DgEjT+Ai2ygdnm+yROfE0A Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, lorenzo.bianconi-qxv4g6HH51o Add support to STM LSM6DS3-LSM6DSM 6-axis (acc + gyro) Mems sensor http://www.st.com/resource/en/datasheet/lsm6ds3.pdf http://www.st.com/resource/en/datasheet/lsm6dsm.pdf - continuous mode support - i2c support - spi support - sw fifo mode support - supported devices: lsm6ds3, lsm6dsm Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> --- drivers/iio/imu/Kconfig | 1 + drivers/iio/imu/Makefile | 2 + drivers/iio/imu/st_lsm6dsx/Kconfig | 23 + drivers/iio/imu/st_lsm6dsx/Makefile | 5 + drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 133 +++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 437 +++++++++++++++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 655 +++++++++++++++++++++++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 88 ++++ drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 126 +++++ 9 files changed, 1470 insertions(+) create mode 100644 drivers/iio/imu/st_lsm6dsx/Kconfig create mode 100644 drivers/iio/imu/st_lsm6dsx/Makefile create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig index 1f1ad41..156630a 100644 --- a/drivers/iio/imu/Kconfig +++ b/drivers/iio/imu/Kconfig @@ -39,6 +39,7 @@ config KMX61 be called kmx61. source "drivers/iio/imu/inv_mpu6050/Kconfig" +source "drivers/iio/imu/st_lsm6dsx/Kconfig" endmenu diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile index c71bcd3..8b563c3 100644 --- a/drivers/iio/imu/Makefile +++ b/drivers/iio/imu/Makefile @@ -17,3 +17,5 @@ obj-y += bmi160/ obj-y += inv_mpu6050/ obj-$(CONFIG_KMX61) += kmx61.o + +obj-y += st_lsm6dsx/ diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig new file mode 100644 index 0000000..2ebcb74 --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig @@ -0,0 +1,23 @@ + +config IIO_ST_LSM6DSX + tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" + depends on (I2C || SPI) + select IIO_BUFFER + select IIO_KFIFO_BUF + select IIO_ST_LSM6DSX_I2C if (I2C) + select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) + help + Say yes here to build support for STMicroelectronics LSM6DSx imu + sensor. Supported devices: lsm6ds3, lsm6dsm + + To compile this driver as a module, choose M here: the module + will be called st_lsm6dsx. + +config IIO_ST_LSM6DSX_I2C + tristate + depends on IIO_ST_LSM6DSX + +config IIO_ST_LSM6DSX_SPI + tristate + depends on IIO_ST_LSM6DSX + diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile new file mode 100644 index 0000000..35919fe --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/Makefile @@ -0,0 +1,5 @@ +st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o + +obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o +obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o +obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h new file mode 100644 index 0000000..5831f63 --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h @@ -0,0 +1,133 @@ +/* + * STMicroelectronics st_lsm6dsx sensor driver + * + * Copyright 2016 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> + * Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org> + * + * Licensed under the GPL-2. + */ + +#ifndef ST_LSM6DSX_H +#define ST_LSM6DSX_H + +#include <linux/device.h> + +#define ST_LSM6DS3_DEV_NAME "lsm6ds3" +#define ST_LSM6DSM_DEV_NAME "lsm6dsm" + +#define ST_LSM6DSX_CHAN_SIZE 2 +#define ST_LSM6DSX_SAMPLE_SIZE 6 +#define ST_LSM6DSX_SAMPLE_DEPTH (ST_LSM6DSX_SAMPLE_SIZE / \ + ST_LSM6DSX_CHAN_SIZE) + +#define ST_LSM6DSX_RX_MAX_LENGTH 8 +#define ST_LSM6DSX_TX_MAX_LENGTH 8 + +struct st_lsm6dsx_transfer_buffer { + u8 rx_buf[ST_LSM6DSX_RX_MAX_LENGTH]; + u8 tx_buf[ST_LSM6DSX_TX_MAX_LENGTH] ____cacheline_aligned; +}; + +struct st_lsm6dsx_transfer_function { + int (*read)(struct device *dev, u8 addr, int len, u8 *data); + int (*write)(struct device *dev, u8 addr, int len, u8 *data); +}; + +struct st_lsm6dsx_reg { + u8 addr; + u8 mask; +}; + +struct st_lsm6dsx_settings { + u8 wai; + u16 max_fifo_size; +}; + +enum st_lsm6dsx_sensor_id { + ST_LSM6DSX_ID_ACC, + ST_LSM6DSX_ID_GYRO, + ST_LSM6DSX_ID_MAX, +}; + +enum st_lsm6dsx_fifo_mode { + ST_LSM6DSX_FIFO_BYPASS = 0x0, + ST_LSM6DSX_FIFO_CONT = 0x6, +}; + +/** + * struct st_lsm6dsx_sensor - ST IMU sensor instance + * @id: Sensor identifier. + * @hw: Pointer to instance of struct st_lsm6dsx_hw. + * @gain: Configured sensor sensitivity. + * @odr: Output data rate of the sensor [Hz]. + * @watermark: Sensor watermark level. + * @sip: Number of samples in a given pattern. + * @decimator: FIFO decimation factor. + * @decimator_mask: Sensor mask for decimation register. + * @delta_ts: Delta time between two consecutive interrupts. + * @ts: Latest timestamp from the interrupt handler. + */ +struct st_lsm6dsx_sensor { + enum st_lsm6dsx_sensor_id id; + struct st_lsm6dsx_hw *hw; + + u32 gain; + u16 odr; + + u16 watermark; + u8 sip; + u8 decimator; + u8 decimator_mask; + + s64 delta_ts; + s64 ts; +}; + +/** + * struct st_lsm6dsx_hw - ST IMU MEMS hw instance + * @name: Pointer to the device name (I2C name or SPI modalias). + * @dev: Pointer to instance of struct device (I2C or SPI). + * @irq: Device interrupt line (I2C or SPI). + * @lock: Mutex to protect read and write operations. + * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO. + * @fifo_mode: FIFO operating mode supported by the device. + * @enable_mask: Enabled sensor bitmask. + * @sip: Total number of samples (acc/gyro) in a given pattern. + * @iio_devs: Pointers to acc/gyro iio_dev instances. + * @settings: Pointer to the specific sensor settings in use. + * @tf: Transfer function structure used by I/O operations. + * @tb: Transfer buffers used by SPI I/O operations. + */ +struct st_lsm6dsx_hw { + const char *name; + struct device *dev; + int irq; + + struct mutex lock; + struct mutex fifo_lock; + + enum st_lsm6dsx_fifo_mode fifo_mode; + u8 enable_mask; + u8 sip; + + struct iio_dev *iio_devs[ST_LSM6DSX_ID_MAX]; + + const struct st_lsm6dsx_settings *settings; + + const struct st_lsm6dsx_transfer_function *tf; + struct st_lsm6dsx_transfer_buffer tb; +}; + +int st_lsm6dsx_probe(struct st_lsm6dsx_hw *hw); +int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor); +int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor); +int st_lsm6dsx_allocate_buffers(struct st_lsm6dsx_hw *hw); +int st_lsm6dsx_write_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, u8 mask, + u8 val); +int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, + u16 watermark); + +#endif /* ST_LSM6DSX_H */ + diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c new file mode 100644 index 0000000..7f4032d --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c @@ -0,0 +1,437 @@ +/* + * STMicroelectronics st_lsm6dsx FIFO buffer library driver + * + * LSM6DS3/LSM6DSM: The FIFO buffer can be configured to store data + * from gyroscope and accelerometer. Samples are queued without any tag + * according to a specific pattern based on 'FIFO data sets' (6 bytes each): + * - 1st data set is reserved for gyroscope data + * - 2nd data set is reserved for accelerometer data + * The FIFO pattern changes depending on the ODRs and decimation factors + * assigned to the FIFO data sets. The first sequence of data stored in FIFO + * buffer contains the data of all the enabled FIFO data sets + * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the + * value of the decimation factor and ODR set for each FIFO data set. + * FIFO supported modes: + * - BYPASS: FIFO disabled + * - CONTINUOUS: FIFO enabled. When the buffer is full, the FIFO index + * restarts from the beginning and the oldest sample is overwritten + * + * Copyright 2016 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> + * Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org> + * + * Licensed under the GPL-2. + */ +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/iio/kfifo_buf.h> + +#include "st_lsm6dsx.h" + +#define ST_LSM6DSX_REG_FIFO_THL_ADDR 0x06 +#define ST_LSM6DSX_REG_FIFO_THH_ADDR 0x07 +#define ST_LSM6DSX_FIFO_TH_MASK GENMASK(11, 0) +#define ST_LSM6DSX_REG_FIFO_DEC_GXL_ADDR 0x08 +#define ST_LSM6DSX_REG_FIFO_MODE_ADDR 0x0a +#define ST_LSM6DSX_FIFO_MODE_MASK GENMASK(2, 0) +#define ST_LSM6DSX_FIFO_ODR_MASK GENMASK(6, 3) +#define ST_LSM6DSX_REG_FIFO_DIFFL_ADDR 0x3a +#define ST_LSM6DSX_FIFO_DIFF_MASK GENMASK(11, 0) +#define ST_LSM6DSX_FIFO_EMPTY_MASK BIT(12) +#define ST_LSM6DSX_REG_FIFO_OUTL_ADDR 0x3e + +#define ST_LSM6DSX_MAX_FIFO_ODR_VAL 0x08 + +struct st_lsm6dsx_decimator_entry { + u8 decimator; + u8 val; +}; + +static const +struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = { + { 0, 0x0 }, + { 1, 0x1 }, + { 2, 0x2 }, + { 3, 0x3 }, + { 4, 0x4 }, + { 8, 0x5 }, + { 16, 0x6 }, + { 32, 0x7 }, +}; + +static int st_lsm6dsx_get_decimator_val(u8 val) +{ + const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table); + int i; + + for (i = 0; i < max_size; i++) + if (st_lsm6dsx_decimator_table[i].decimator == val) + break; + + return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val; +} + +static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw, + u16 *max_odr, u16 *min_odr) +{ + struct st_lsm6dsx_sensor *sensor; + int i; + + *max_odr = 0, *min_odr = ~0; + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + sensor = iio_priv(hw->iio_devs[i]); + + if (!(hw->enable_mask & BIT(sensor->id))) + continue; + + *max_odr = max_t(u16, *max_odr, sensor->odr); + *min_odr = min_t(u16, *min_odr, sensor->odr); + } +} + +static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw) +{ + struct st_lsm6dsx_sensor *sensor; + u16 max_odr, min_odr, sip = 0; + int err, i; + u8 data; + + st_lsm6dsx_get_max_min_odr(hw, &max_odr, &min_odr); + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + sensor = iio_priv(hw->iio_devs[i]); + + /* update fifo decimators and sample in pattern */ + if (hw->enable_mask & BIT(sensor->id)) { + sensor->sip = sensor->odr / min_odr; + sensor->decimator = max_odr / sensor->odr; + data = st_lsm6dsx_get_decimator_val(sensor->decimator); + } else { + sensor->sip = 0; + sensor->decimator = 0; + data = 0; + } + + err = st_lsm6dsx_write_with_mask(hw, + ST_LSM6DSX_REG_FIFO_DEC_GXL_ADDR, + sensor->decimator_mask, data); + if (err < 0) + return err; + + sip += sensor->sip; + } + hw->sip = sip; + + return 0; +} + +static int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw, + enum st_lsm6dsx_fifo_mode fifo_mode) +{ + u8 data; + int err; + + switch (fifo_mode) { + case ST_LSM6DSX_FIFO_BYPASS: + data = fifo_mode; + break; + case ST_LSM6DSX_FIFO_CONT: + data = (ST_LSM6DSX_MAX_FIFO_ODR_VAL << + __ffs(ST_LSM6DSX_FIFO_ODR_MASK)) | fifo_mode; + break; + default: + return -EINVAL; + } + + err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_FIFO_MODE_ADDR, + sizeof(data), &data); + if (err < 0) + return err; + + hw->fifo_mode = fifo_mode; + + return 0; +} + +int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark) +{ + u16 fifo_watermark = ~0, cur_watermark, sip = 0; + struct st_lsm6dsx_hw *hw = sensor->hw; + struct st_lsm6dsx_sensor *cur_sensor; + __le16 wdata; + int i, err; + u8 data; + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + cur_sensor = iio_priv(hw->iio_devs[i]); + + if (!(hw->enable_mask & BIT(cur_sensor->id))) + continue; + + cur_watermark = (cur_sensor == sensor) ? watermark + : cur_sensor->watermark; + + fifo_watermark = min_t(u16, fifo_watermark, cur_watermark); + sip += cur_sensor->sip; + } + + if (!sip) + return 0; + + fifo_watermark = max_t(u16, fifo_watermark, sip); + fifo_watermark = (fifo_watermark / sip) * sip; + fifo_watermark = fifo_watermark * ST_LSM6DSX_SAMPLE_DEPTH; + + mutex_lock(&hw->lock); + + err = hw->tf->read(hw->dev, ST_LSM6DSX_REG_FIFO_THH_ADDR, + sizeof(data), &data); + if (err < 0) + goto out; + + fifo_watermark = ((data & ~ST_LSM6DSX_FIFO_TH_MASK) << 8) | + (fifo_watermark & ST_LSM6DSX_FIFO_TH_MASK); + + wdata = cpu_to_le16(fifo_watermark); + err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_FIFO_THL_ADDR, + sizeof(wdata), (u8 *)&wdata); +out: + mutex_unlock(&hw->lock); + + return err < 0 ? err : 0; +} + +/** + * st_lsm6dsx_read_fifo() - LSM6DS3-LSM6DSM read FIFO routine + * @hw: Pointer to instance of struct st_lsm6dsx_hw. + * + * Read samples from the hw FIFO and push them to IIO buffers. + * + * Return: Number of bytes read from the FIFO + */ +static int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw) +{ + u8 buff[ALIGN(ST_LSM6DSX_SAMPLE_SIZE, sizeof(s64)) + sizeof(s64)]; + u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE; + struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor; + s64 acc_ts, acc_delta_ts, gyro_ts, gyro_delta_ts; + int err, acc_sip, gyro_sip, read_len, samples; + __le16 fifo_status; + + err = hw->tf->read(hw->dev, ST_LSM6DSX_REG_FIFO_DIFFL_ADDR, + sizeof(fifo_status), (u8 *)&fifo_status); + if (err < 0) + return err; + + if (fifo_status & cpu_to_le16(ST_LSM6DSX_FIFO_EMPTY_MASK)) + return 0; + + fifo_len = (le16_to_cpu(fifo_status) & ST_LSM6DSX_FIFO_DIFF_MASK) * + ST_LSM6DSX_CHAN_SIZE; + samples = fifo_len / ST_LSM6DSX_SAMPLE_SIZE; + fifo_len = (fifo_len / pattern_len) * pattern_len; + + /* + * compute delta timestamp between two consecutive samples + * in order to estimate queueing time of data generated + * by the sensor + */ + acc_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); + acc_ts = acc_sensor->ts - acc_sensor->delta_ts; + acc_delta_ts = div_s64(acc_sensor->delta_ts * acc_sensor->decimator, + samples); + + gyro_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]); + gyro_ts = gyro_sensor->ts - gyro_sensor->delta_ts; + gyro_delta_ts = div_s64(gyro_sensor->delta_ts * gyro_sensor->decimator, + samples); + + for (read_len = 0; read_len < fifo_len; read_len += pattern_len) { + gyro_sip = gyro_sensor->sip; + acc_sip = acc_sensor->sip; + + while (acc_sip > 0 || gyro_sip > 0) { + if (gyro_sip-- > 0) { + err = hw->tf->read(hw->dev, + ST_LSM6DSX_REG_FIFO_OUTL_ADDR, + ST_LSM6DSX_SAMPLE_SIZE, buff); + if (err < 0) + return err; + + iio_push_to_buffers_with_timestamp( + hw->iio_devs[ST_LSM6DSX_ID_GYRO], + buff, gyro_ts); + gyro_ts += gyro_delta_ts; + } + + if (acc_sip-- > 0) { + err = hw->tf->read(hw->dev, + ST_LSM6DSX_REG_FIFO_OUTL_ADDR, + ST_LSM6DSX_SAMPLE_SIZE, buff); + if (err < 0) + return err; + + iio_push_to_buffers_with_timestamp( + hw->iio_devs[ST_LSM6DSX_ID_ACC], + buff, acc_ts); + acc_ts += acc_delta_ts; + } + } + } + + return read_len; +} + +static int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw) +{ + int err; + + mutex_lock(&hw->fifo_lock); + + st_lsm6dsx_read_fifo(hw); + err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_BYPASS); + + mutex_unlock(&hw->fifo_lock); + + return err; +} + +static int st_lsm6dsx_update_fifo(struct iio_dev *iio_dev, bool enable) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + struct st_lsm6dsx_hw *hw = sensor->hw; + int err; + + if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS) { + err = st_lsm6dsx_flush_fifo(hw); + if (err < 0) + return err; + } + + if (enable) { + err = st_lsm6dsx_sensor_enable(sensor); + if (err < 0) + return err; + } else { + err = st_lsm6dsx_sensor_disable(sensor); + if (err < 0) + return err; + } + + err = st_lsm6dsx_update_decimators(hw); + if (err < 0) + return err; + + err = st_lsm6dsx_update_watermark(sensor, sensor->watermark); + if (err < 0) + return err; + + if (hw->enable_mask) { + err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT); + if (err < 0) + return err; + + /* + * store enable buffer timestamp as reference to compute + * first delta timestamp + */ + sensor->ts = iio_get_time_ns(iio_dev); + } + + return 0; +} + +static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private) +{ + struct st_lsm6dsx_hw *hw = (struct st_lsm6dsx_hw *)private; + struct st_lsm6dsx_sensor *sensor; + int i; + + if (!hw->sip) + return IRQ_NONE; + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + sensor = iio_priv(hw->iio_devs[i]); + + if (sensor->sip > 0) { + s64 timestamp; + + timestamp = iio_get_time_ns(hw->iio_devs[i]); + sensor->delta_ts = timestamp - sensor->ts; + sensor->ts = timestamp; + } + } + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private) +{ + struct st_lsm6dsx_hw *hw = (struct st_lsm6dsx_hw *)private; + int count; + + mutex_lock(&hw->fifo_lock); + count = st_lsm6dsx_read_fifo(hw); + mutex_unlock(&hw->fifo_lock); + + return !count ? IRQ_NONE : IRQ_HANDLED; +} + +static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev) +{ + return st_lsm6dsx_update_fifo(iio_dev, true); +} + +static int st_lsm6dsx_buffer_postdisable(struct iio_dev *iio_dev) +{ + return st_lsm6dsx_update_fifo(iio_dev, false); +} + +static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = { + .preenable = st_lsm6dsx_buffer_preenable, + .postdisable = st_lsm6dsx_buffer_postdisable, +}; + +int st_lsm6dsx_allocate_buffers(struct st_lsm6dsx_hw *hw) +{ + struct iio_buffer *buffer; + unsigned long irq_type; + int i, err; + + irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq)); + + switch (irq_type) { + case IRQF_TRIGGER_HIGH: + case IRQF_TRIGGER_RISING: + break; + default: + dev_info(hw->dev, "mode %lx unsupported\n", irq_type); + return -EINVAL; + } + + err = devm_request_threaded_irq(hw->dev, hw->irq, + st_lsm6dsx_handler_irq, + st_lsm6dsx_handler_thread, + irq_type | IRQF_ONESHOT, + hw->name, hw); + if (err) { + dev_err(hw->dev, "failed to request trigger irq %d\n", + hw->irq); + return err; + } + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + buffer = devm_iio_kfifo_allocate(hw->dev); + if (!buffer) + return -ENOMEM; + + iio_device_attach_buffer(hw->iio_devs[i], buffer); + hw->iio_devs[i]->modes |= INDIO_BUFFER_SOFTWARE; + hw->iio_devs[i]->setup_ops = &st_lsm6dsx_buffer_ops; + } + + return 0; +} + diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c new file mode 100644 index 0000000..473315a --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c @@ -0,0 +1,655 @@ +/* + * STMicroelectronics st_lsm6dsx sensor driver + * + * The ST LSM6DSx IMU MEMS series consists of 3D digital accelerometer + * and 3D digital gyroscope system-in-package with a digital I2C/SPI serial + * interface standard output. + * LSM6DSx IMU MEMS series has a dynamic user-selectable full-scale + * acceleration range of +-2/+-4/+-8/+-16 g and an angular rate range of + * +-125/+-245/+-500/+-1000/+-2000 dps + * LSM6DSx series has an integrated First-In-First-Out (FIFO) buffer + * allowing dynamic batching of sensor data. + * + * Supported sensors: + * - LSM6DS3: + * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 + * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 + * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 + * - FIFO size: 8KB + * + * - LSM6DSM: + * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 + * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 + * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 + * - FIFO size: 4KB + * + * Copyright 2016 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> + * Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#include "st_lsm6dsx.h" + +#define ST_LSM6DSX_REG_ACC_DEC_MASK GENMASK(2, 0) +#define ST_LSM6DSX_REG_GYRO_DEC_MASK GENMASK(5, 3) +#define ST_LSM6DSX_REG_INT1_ADDR 0x0d +#define ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK BIT(3) +#define ST_LSM6DSX_REG_WHOAMI_ADDR 0x0f +#define ST_LSM6DSX_REG_RESET_ADDR 0x12 +#define ST_LSM6DSX_REG_RESET_MASK BIT(0) +#define ST_LSM6DSX_REG_BDU_ADDR 0x12 +#define ST_LSM6DSX_REG_BDU_MASK BIT(6) +#define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR 0x13 +#define ST_LSM6DSX_REG_INT2_ON_INT1_MASK BIT(5) +#define ST_LSM6DSX_REG_ROUNDING_ADDR 0x16 +#define ST_LSM6DSX_REG_ROUNDING_MASK BIT(2) +#define ST_LSM6DSX_REG_LIR_ADDR 0x58 +#define ST_LSM6DSX_REG_LIR_MASK BIT(0) + +#define ST_LSM6DSX_REG_ACC_ODR_ADDR 0x10 +#define ST_LSM6DSX_REG_ACC_ODR_MASK GENMASK(7, 4) +#define ST_LSM6DSX_REG_ACC_FS_ADDR 0x10 +#define ST_LSM6DSX_REG_ACC_FS_MASK GENMASK(3, 2) +#define ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR 0x28 +#define ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR 0x2a +#define ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR 0x2c + +#define ST_LSM6DSX_REG_GYRO_ODR_ADDR 0x11 +#define ST_LSM6DSX_REG_GYRO_ODR_MASK GENMASK(7, 4) +#define ST_LSM6DSX_REG_GYRO_FS_ADDR 0x11 +#define ST_LSM6DSX_REG_GYRO_FS_MASK GENMASK(3, 2) +#define ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR 0x22 +#define ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR 0x24 +#define ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR 0x26 + +#define ST_LSM6DS3_WHOAMI 0x69 +#define ST_LSM6DSM_WHOAMI 0x6a + +#define ST_LSM6DS3_MAX_FIFO_SIZE 8192 +#define ST_LSM6DSM_MAX_FIFO_SIZE 4096 + +#define ST_LSM6DSX_ACC_FS_2G_GAIN IIO_G_TO_M_S_2(61) +#define ST_LSM6DSX_ACC_FS_4G_GAIN IIO_G_TO_M_S_2(122) +#define ST_LSM6DSX_ACC_FS_8G_GAIN IIO_G_TO_M_S_2(244) +#define ST_LSM6DSX_ACC_FS_16G_GAIN IIO_G_TO_M_S_2(488) + +#define ST_LSM6DSX_GYRO_FS_245_GAIN IIO_DEGREE_TO_RAD(4375) +#define ST_LSM6DSX_GYRO_FS_500_GAIN IIO_DEGREE_TO_RAD(8750) +#define ST_LSM6DSX_GYRO_FS_1000_GAIN IIO_DEGREE_TO_RAD(17500) +#define ST_LSM6DSX_GYRO_FS_2000_GAIN IIO_DEGREE_TO_RAD(70000) + +struct st_lsm6dsx_odr { + u16 hz; + u8 val; +}; + +#define ST_LSM6DSX_ODR_LIST_SIZE 6 +struct st_lsm6dsx_odr_table_entry { + struct st_lsm6dsx_reg reg; + struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE]; +}; + +static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = { + [ST_LSM6DSX_ID_ACC] = { + .reg = { + .addr = ST_LSM6DSX_REG_ACC_ODR_ADDR, + .mask = ST_LSM6DSX_REG_ACC_ODR_MASK, + }, + .odr_avl[0] = { 13, 0x01 }, + .odr_avl[1] = { 26, 0x02 }, + .odr_avl[2] = { 52, 0x03 }, + .odr_avl[3] = { 104, 0x04 }, + .odr_avl[4] = { 208, 0x05 }, + .odr_avl[5] = { 416, 0x06 }, + }, + [ST_LSM6DSX_ID_GYRO] = { + .reg = { + .addr = ST_LSM6DSX_REG_GYRO_ODR_ADDR, + .mask = ST_LSM6DSX_REG_GYRO_ODR_MASK, + }, + .odr_avl[0] = { 13, 0x01 }, + .odr_avl[1] = { 26, 0x02 }, + .odr_avl[2] = { 52, 0x03 }, + .odr_avl[3] = { 104, 0x04 }, + .odr_avl[4] = { 208, 0x05 }, + .odr_avl[5] = { 416, 0x06 }, + } +}; + +struct st_lsm6dsx_fs { + u32 gain; + u8 val; +}; + +#define ST_LSM6DSX_FS_LIST_SIZE 4 +struct st_lsm6dsx_fs_table_entry { + struct st_lsm6dsx_reg reg; + struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE]; +}; + +static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = { + [ST_LSM6DSX_ID_ACC] = { + .reg = { + .addr = ST_LSM6DSX_REG_ACC_FS_ADDR, + .mask = ST_LSM6DSX_REG_ACC_FS_MASK, + }, + .fs_avl[0] = { ST_LSM6DSX_ACC_FS_2G_GAIN, 0x0 }, + .fs_avl[1] = { ST_LSM6DSX_ACC_FS_4G_GAIN, 0x2 }, + .fs_avl[2] = { ST_LSM6DSX_ACC_FS_8G_GAIN, 0x3 }, + .fs_avl[3] = { ST_LSM6DSX_ACC_FS_16G_GAIN, 0x1 }, + }, + [ST_LSM6DSX_ID_GYRO] = { + .reg = { + .addr = ST_LSM6DSX_REG_GYRO_FS_ADDR, + .mask = ST_LSM6DSX_REG_GYRO_FS_MASK, + }, + .fs_avl[0] = { ST_LSM6DSX_GYRO_FS_245_GAIN, 0x0 }, + .fs_avl[1] = { ST_LSM6DSX_GYRO_FS_500_GAIN, 0x1 }, + .fs_avl[2] = { ST_LSM6DSX_GYRO_FS_1000_GAIN, 0x2 }, + .fs_avl[3] = { ST_LSM6DSX_GYRO_FS_2000_GAIN, 0x3 }, + } +}; + +static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { + { + .wai = ST_LSM6DS3_WHOAMI, + .max_fifo_size = ST_LSM6DS3_MAX_FIFO_SIZE, + }, + { + .wai = ST_LSM6DSM_WHOAMI, + .max_fifo_size = ST_LSM6DSM_MAX_FIFO_SIZE, + }, +}; + +#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \ +{ \ + .type = chan_type, \ + .address = addr, \ + .modified = 1, \ + .channel2 = mod, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ + BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .scan_index = scan_idx, \ + .scan_type = { \ + .sign = 's', \ + .realbits = 16, \ + .storagebits = 16, \ + .endianness = IIO_LE, \ + }, \ +} + +static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = { + ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR, + IIO_MOD_X, 0), + ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR, + IIO_MOD_Y, 1), + ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR, + IIO_MOD_Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = { + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR, + IIO_MOD_X, 0), + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR, + IIO_MOD_Y, 1), + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR, + IIO_MOD_Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), +}; + +int st_lsm6dsx_write_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, u8 mask, + u8 val) +{ + u8 data; + int err; + + mutex_lock(&hw->lock); + + err = hw->tf->read(hw->dev, addr, sizeof(data), &data); + if (err < 0) { + dev_err(hw->dev, "failed to read %02x register\n", addr); + goto out; + } + + data = (data & ~mask) | ((val << __ffs(mask)) & mask); + + err = hw->tf->write(hw->dev, addr, sizeof(data), &data); + if (err < 0) + dev_err(hw->dev, "failed to write %02x register\n", addr); + +out: + mutex_unlock(&hw->lock); + + return err; +} + +static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw) +{ + int err, i; + u8 data; + + err = hw->tf->read(hw->dev, ST_LSM6DSX_REG_WHOAMI_ADDR, sizeof(data), + &data); + if (err < 0) { + dev_err(hw->dev, "failed to read whoami register\n"); + return err; + } + + for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_sensor_settings); i++) { + if (data == st_lsm6dsx_sensor_settings[i].wai) { + hw->settings = &st_lsm6dsx_sensor_settings[i]; + break; + } + } + + if (i == ARRAY_SIZE(st_lsm6dsx_sensor_settings)) { + dev_err(hw->dev, "unsupported whoami [%02x]\n", data); + return -ENODEV; + } + + return 0; +} + +static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor, + u32 gain) +{ + enum st_lsm6dsx_sensor_id id = sensor->id; + int i, err; + u8 val; + + for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) + if (st_lsm6dsx_fs_table[id].fs_avl[i].gain == gain) + break; + + if (i == ST_LSM6DSX_FS_LIST_SIZE) + return -EINVAL; + + val = st_lsm6dsx_fs_table[id].fs_avl[i].val; + err = st_lsm6dsx_write_with_mask(sensor->hw, + st_lsm6dsx_fs_table[id].reg.addr, + st_lsm6dsx_fs_table[id].reg.mask, + val); + if (err < 0) + return err; + + sensor->gain = gain; + + return 0; +} + +static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr) +{ + enum st_lsm6dsx_sensor_id id = sensor->id; + int i, err; + u8 val; + + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) + if (st_lsm6dsx_odr_table[id].odr_avl[i].hz == odr) + break; + + if (i == ST_LSM6DSX_ODR_LIST_SIZE) + return -EINVAL; + + val = st_lsm6dsx_odr_table[id].odr_avl[i].val; + err = st_lsm6dsx_write_with_mask(sensor->hw, + st_lsm6dsx_odr_table[id].reg.addr, + st_lsm6dsx_odr_table[id].reg.mask, + val); + if (err < 0) + return err; + + sensor->odr = odr; + + return 0; +} + +int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor) +{ + int err; + + err = st_lsm6dsx_set_odr(sensor, sensor->odr); + if (err < 0) + return err; + + sensor->hw->enable_mask |= BIT(sensor->id); + + return 0; +} + +int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor) +{ + enum st_lsm6dsx_sensor_id id = sensor->id; + int err; + + err = st_lsm6dsx_write_with_mask(sensor->hw, + st_lsm6dsx_odr_table[id].reg.addr, + st_lsm6dsx_odr_table[id].reg.mask, 0); + if (err < 0) + return err; + + sensor->hw->enable_mask &= ~BIT(id); + + return 0; +} + +static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor, + u8 addr, int *val) +{ + int err, delay; + __le16 data; + + err = st_lsm6dsx_sensor_enable(sensor); + if (err < 0) + return err; + + delay = 1000000 / sensor->odr; + usleep_range(delay, 2 * delay); + + err = sensor->hw->tf->read(sensor->hw->dev, addr, sizeof(data), + (u8 *)&data); + if (err < 0) + return err; + + st_lsm6dsx_sensor_disable(sensor); + + *val = (s16)data; + + return IIO_VAL_INT; +} + +static int st_lsm6dsx_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *ch, + int *val, int *val2, long mask) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + int ret; + + ret = iio_device_claim_direct_mode(iio_dev); + if (ret) + return ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = st_lsm6dsx_read_oneshot(sensor, ch->address, val); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = sensor->odr; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = sensor->gain; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + default: + ret = -EINVAL; + break; + } + + iio_device_release_direct_mode(iio_dev); + + return ret; +} + +static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + int err; + + err = iio_device_claim_direct_mode(iio_dev); + if (err) + return err; + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + err = st_lsm6dsx_set_full_scale(sensor, val2); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + err = st_lsm6dsx_set_odr(sensor, val); + break; + default: + err = -EINVAL; + break; + } + + iio_device_release_direct_mode(iio_dev); + + return err; +} + +static int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + struct st_lsm6dsx_hw *hw = sensor->hw; + int err, max_fifo_len; + + max_fifo_len = hw->settings->max_fifo_size / ST_LSM6DSX_SAMPLE_SIZE; + if (val < 1 || val > max_fifo_len) + return -EINVAL; + + err = st_lsm6dsx_update_watermark(sensor, val); + if (err < 0) + return err; + + sensor->watermark = val; + + return 0; +} + +static ssize_t +st_lsm6dsx_sysfs_sampling_frequency_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); + enum st_lsm6dsx_sensor_id id = sensor->id; + int i, len = 0; + + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", + st_lsm6dsx_odr_table[id].odr_avl[i].hz); + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); + enum st_lsm6dsx_sensor_id id = sensor->id; + int i, len = 0; + + for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", + st_lsm6dsx_fs_table[id].fs_avl[i].gain); + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_sysfs_sampling_frequency_avail); +static IIO_DEVICE_ATTR(in_accel_scale_available, 0444, + st_lsm6dsx_sysfs_scale_avail, NULL, 0); +static IIO_DEVICE_ATTR(in_anglvel_scale_available, 0444, + st_lsm6dsx_sysfs_scale_avail, NULL, 0); + +static struct attribute *st_lsm6dsx_acc_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_accel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_lsm6dsx_acc_attribute_group = { + .attrs = st_lsm6dsx_acc_attributes, +}; + +static const struct iio_info st_lsm6dsx_acc_info = { + .driver_module = THIS_MODULE, + .attrs = &st_lsm6dsx_acc_attribute_group, + .read_raw = st_lsm6dsx_read_raw, + .write_raw = st_lsm6dsx_write_raw, + .hwfifo_set_watermark = st_lsm6dsx_set_watermark, +}; + +static struct attribute *st_lsm6dsx_gyro_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_anglvel_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_lsm6dsx_gyro_attribute_group = { + .attrs = st_lsm6dsx_gyro_attributes, +}; + +static const struct iio_info st_lsm6dsx_gyro_info = { + .driver_module = THIS_MODULE, + .attrs = &st_lsm6dsx_gyro_attribute_group, + .read_raw = st_lsm6dsx_read_raw, + .write_raw = st_lsm6dsx_write_raw, + .hwfifo_set_watermark = st_lsm6dsx_set_watermark, +}; + +static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0}; + +static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw) +{ + int err; + u8 data; + + data = ST_LSM6DSX_REG_RESET_MASK; + err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_RESET_ADDR, sizeof(data), + &data); + if (err < 0) + return err; + + msleep(200); + + /* latch interrupts */ + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_LIR_ADDR, + ST_LSM6DSX_REG_LIR_MASK, 1); + if (err < 0) + return err; + + /* enable Block Data Update */ + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_BDU_ADDR, + ST_LSM6DSX_REG_BDU_MASK, 1); + if (err < 0) + return err; + + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_ROUNDING_ADDR, + ST_LSM6DSX_REG_ROUNDING_MASK, 1); + if (err < 0) + return err; + + /* enable FIFO watermak interrupt */ + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_INT1_ADDR, + ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK, 1); + if (err < 0) + return err; + + /* redirect INT2 on INT1 */ + return st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_INT2_ON_INT1_ADDR, + ST_LSM6DSX_REG_INT2_ON_INT1_MASK, 1); +} + +static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw, + enum st_lsm6dsx_sensor_id id) +{ + struct st_lsm6dsx_sensor *sensor; + struct iio_dev *iio_dev; + + iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor)); + if (!iio_dev) + return NULL; + + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->dev.parent = hw->dev; + iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks; + + sensor = iio_priv(iio_dev); + sensor->id = id; + sensor->hw = hw; + sensor->odr = st_lsm6dsx_odr_table[id].odr_avl[0].hz; + sensor->gain = st_lsm6dsx_fs_table[id].fs_avl[0].gain; + sensor->watermark = 1; + + switch (id) { + case ST_LSM6DSX_ID_ACC: + iio_dev->channels = st_lsm6dsx_acc_channels; + iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_acc_channels); + iio_dev->name = "lsm6dsx_accel"; + iio_dev->info = &st_lsm6dsx_acc_info; + + sensor->decimator_mask = ST_LSM6DSX_REG_ACC_DEC_MASK; + break; + case ST_LSM6DSX_ID_GYRO: + iio_dev->channels = st_lsm6dsx_gyro_channels; + iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_gyro_channels); + iio_dev->name = "lsm6dsx_gyro"; + iio_dev->info = &st_lsm6dsx_gyro_info; + + sensor->decimator_mask = ST_LSM6DSX_REG_GYRO_DEC_MASK; + break; + default: + return NULL; + } + + return iio_dev; +} + +int st_lsm6dsx_probe(struct st_lsm6dsx_hw *hw) +{ + int i, err; + + mutex_init(&hw->lock); + mutex_init(&hw->fifo_lock); + + err = st_lsm6dsx_check_whoami(hw); + if (err < 0) + return err; + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + hw->iio_devs[i] = st_lsm6dsx_alloc_iiodev(hw, i); + if (!hw->iio_devs[i]) + return -ENOMEM; + } + + err = st_lsm6dsx_init_device(hw); + if (err < 0) + return err; + + if (hw->irq > 0) { + err = st_lsm6dsx_allocate_buffers(hw); + if (err < 0) + return err; + } + + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { + err = devm_iio_device_register(hw->dev, hw->iio_devs[i]); + if (err) + return err; + } + + return 0; +} +EXPORT_SYMBOL(st_lsm6dsx_probe); + +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>"); +MODULE_AUTHOR("Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org>"); +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c new file mode 100644 index 0000000..cb9a158 --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c @@ -0,0 +1,88 @@ +/* + * STMicroelectronics st_lsm6dsx i2c driver + * + * Copyright 2016 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> + * Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include "st_lsm6dsx.h" + +static int st_lsm6dsx_i2c_read(struct device *dev, u8 addr, int len, u8 *data) +{ + return i2c_smbus_read_i2c_block_data_or_emulated(to_i2c_client(dev), + addr, len, data); +} + +static int st_lsm6dsx_i2c_write(struct device *dev, u8 addr, int len, u8 *data) +{ + return i2c_smbus_write_i2c_block_data(to_i2c_client(dev), addr, + len, data); +} + +static const struct st_lsm6dsx_transfer_function st_lsm6dsx_transfer_fn = { + .read = st_lsm6dsx_i2c_read, + .write = st_lsm6dsx_i2c_write, +}; + +static int st_lsm6dsx_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct st_lsm6dsx_hw *hw; + + hw = devm_kzalloc(&client->dev, sizeof(*hw), GFP_KERNEL); + if (!hw) + return -ENOMEM; + + i2c_set_clientdata(client, hw); + hw->name = client->name; + hw->dev = &client->dev; + hw->irq = client->irq; + hw->tf = &st_lsm6dsx_transfer_fn; + + return st_lsm6dsx_probe(hw); +} + +static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { + { + .compatible = "st,lsm6ds3", + .data = ST_LSM6DS3_DEV_NAME, + }, + { + .compatible = "st,lsm6dsm", + .data = ST_LSM6DSM_DEV_NAME, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); + +static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { + { ST_LSM6DS3_DEV_NAME }, + { ST_LSM6DSM_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); + +static struct i2c_driver st_lsm6dsx_driver = { + .driver = { + .name = "st_lsm6dsx_i2c", + .of_match_table = of_match_ptr(st_lsm6dsx_i2c_of_match), + }, + .probe = st_lsm6dsx_i2c_probe, + .id_table = st_lsm6dsx_i2c_id_table, +}; +module_i2c_driver(st_lsm6dsx_driver); + +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>"); +MODULE_AUTHOR("Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org>"); +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i2c driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c new file mode 100644 index 0000000..f16eab5 --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c @@ -0,0 +1,126 @@ +/* + * STMicroelectronics st_lsm6dsx spi driver + * + * Copyright 2016 STMicroelectronics Inc. + * + * Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> + * Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org> + * + * Licensed under the GPL-2. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/slab.h> +#include <linux/of.h> + +#include "st_lsm6dsx.h" + +#define SENSORS_SPI_READ BIT(7) + +static int st_lsm6dsx_spi_read(struct device *dev, u8 addr, int len, + u8 *data) +{ + struct spi_device *spi = to_spi_device(dev); + struct st_lsm6dsx_hw *hw = spi_get_drvdata(spi); + int err; + + struct spi_transfer xfers[] = { + { + .tx_buf = hw->tb.tx_buf, + .bits_per_word = 8, + .len = 1, + }, + { + .rx_buf = hw->tb.rx_buf, + .bits_per_word = 8, + .len = len, + } + }; + + hw->tb.tx_buf[0] = addr | SENSORS_SPI_READ; + + err = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers)); + if (err < 0) + return err; + + memcpy(data, hw->tb.rx_buf, len * sizeof(u8)); + + return len; +} + +static int st_lsm6dsx_spi_write(struct device *dev, u8 addr, int len, + u8 *data) +{ + struct st_lsm6dsx_hw *hw; + struct spi_device *spi; + + if (len >= ST_LSM6DSX_TX_MAX_LENGTH) + return -ENOMEM; + + spi = to_spi_device(dev); + hw = spi_get_drvdata(spi); + + hw->tb.tx_buf[0] = addr; + memcpy(&hw->tb.tx_buf[1], data, len); + + return spi_write(spi, hw->tb.tx_buf, len + 1); +} + +static const struct st_lsm6dsx_transfer_function st_lsm6dsx_transfer_fn = { + .read = st_lsm6dsx_spi_read, + .write = st_lsm6dsx_spi_write, +}; + +static int st_lsm6dsx_spi_probe(struct spi_device *spi) +{ + struct st_lsm6dsx_hw *hw; + + hw = devm_kzalloc(&spi->dev, sizeof(*hw), GFP_KERNEL); + if (!hw) + return -ENOMEM; + + spi_set_drvdata(spi, hw); + hw->name = spi->modalias; + hw->dev = &spi->dev; + hw->irq = spi->irq; + hw->tf = &st_lsm6dsx_transfer_fn; + + return st_lsm6dsx_probe(hw); +} + +static const struct of_device_id st_lsm6dsx_spi_of_match[] = { + { + .compatible = "st,lsm6ds3", + .data = ST_LSM6DS3_DEV_NAME, + }, + { + .compatible = "st,lsm6dsm", + .data = ST_LSM6DSM_DEV_NAME, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); + +static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { + { ST_LSM6DS3_DEV_NAME }, + { ST_LSM6DSM_DEV_NAME }, + {}, +}; +MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); + +static struct spi_driver st_lsm6dsx_driver = { + .driver = { + .name = "st_lsm6dsx_spi", + .of_match_table = of_match_ptr(st_lsm6dsx_spi_of_match), + }, + .probe = st_lsm6dsx_spi_probe, + .id_table = st_lsm6dsx_spi_id_table, +}; +module_spi_driver(st_lsm6dsx_driver); + +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>"); +MODULE_AUTHOR("Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org>"); +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx spi driver"); +MODULE_LICENSE("GPL v2"); -- 2.9.3 ^ permalink raw reply related [flat|nested] 5+ messages in thread
[parent not found: <20161210090218.4609-2-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>]
* Re: [PATCH v3 1/2] iio: imu: add support to lsm6dsx driver [not found] ` <20161210090218.4609-2-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> @ 2016-12-30 16:01 ` Jonathan Cameron 0 siblings, 0 replies; 5+ messages in thread From: Jonathan Cameron @ 2016-12-30 16:01 UTC (permalink / raw) To: Lorenzo Bianconi Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, lorenzo.bianconi-qxv4g6HH51o On 10/12/16 09:02, Lorenzo Bianconi wrote: > Add support to STM LSM6DS3-LSM6DSM 6-axis (acc + gyro) Mems sensor > > http://www.st.com/resource/en/datasheet/lsm6ds3.pdf > http://www.st.com/resource/en/datasheet/lsm6dsm.pdf > > - continuous mode support > - i2c support > - spi support > - sw fifo mode support > - supported devices: lsm6ds3, lsm6dsm > > Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> Hi Lorenzo, I've obviously not looked at this for a while and with fresh eyes I've picked up on a few more little bits and bobs that would be nice to cleanup. * I'm not keen on using the name of the device (string) as the driver_data element. Would be cleaner and more 'standard' to introduce an enum for that. * It might be possible to bring all the asignments of hw elements into the core probe which would remove a small amount of duplication and make it a tiny bit more readable. (really minor point!) * The use of claim_direct_mode and friends in read_raw is probably covering too many things. There is no harm in allowing reading of the scale / sampling frequency whilst buffered operation is on going. A few other trivial bits and bobs inline. Anyhow, nearly ready and a nice driver for this complex bit of hardware. Looks like there are plenty of other features that could be added later ;) Jonathan > --- > drivers/iio/imu/Kconfig | 1 + > drivers/iio/imu/Makefile | 2 + > drivers/iio/imu/st_lsm6dsx/Kconfig | 23 + > drivers/iio/imu/st_lsm6dsx/Makefile | 5 + > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 133 +++++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 437 +++++++++++++++++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 655 +++++++++++++++++++++++++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 88 ++++ > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 126 +++++ > 9 files changed, 1470 insertions(+) > create mode 100644 drivers/iio/imu/st_lsm6dsx/Kconfig > create mode 100644 drivers/iio/imu/st_lsm6dsx/Makefile > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > > diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig > index 1f1ad41..156630a 100644 > --- a/drivers/iio/imu/Kconfig > +++ b/drivers/iio/imu/Kconfig > @@ -39,6 +39,7 @@ config KMX61 > be called kmx61. > > source "drivers/iio/imu/inv_mpu6050/Kconfig" > +source "drivers/iio/imu/st_lsm6dsx/Kconfig" > > endmenu > > diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile > index c71bcd3..8b563c3 100644 > --- a/drivers/iio/imu/Makefile > +++ b/drivers/iio/imu/Makefile > @@ -17,3 +17,5 @@ obj-y += bmi160/ > obj-y += inv_mpu6050/ > > obj-$(CONFIG_KMX61) += kmx61.o > + > +obj-y += st_lsm6dsx/ > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig > new file mode 100644 > index 0000000..2ebcb74 > --- /dev/null > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig > @@ -0,0 +1,23 @@ > + > +config IIO_ST_LSM6DSX > + tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors" > + depends on (I2C || SPI) > + select IIO_BUFFER > + select IIO_KFIFO_BUF > + select IIO_ST_LSM6DSX_I2C if (I2C) > + select IIO_ST_LSM6DSX_SPI if (SPI_MASTER) > + help > + Say yes here to build support for STMicroelectronics LSM6DSx imu > + sensor. Supported devices: lsm6ds3, lsm6dsm > + > + To compile this driver as a module, choose M here: the module > + will be called st_lsm6dsx. > + > +config IIO_ST_LSM6DSX_I2C > + tristate > + depends on IIO_ST_LSM6DSX > + > +config IIO_ST_LSM6DSX_SPI > + tristate > + depends on IIO_ST_LSM6DSX > + > diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile > new file mode 100644 > index 0000000..35919fe > --- /dev/null > +++ b/drivers/iio/imu/st_lsm6dsx/Makefile > @@ -0,0 +1,5 @@ > +st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o > + > +obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o > +obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o > +obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > new file mode 100644 > index 0000000..5831f63 > --- /dev/null > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h > @@ -0,0 +1,133 @@ > +/* > + * STMicroelectronics st_lsm6dsx sensor driver > + * > + * Copyright 2016 STMicroelectronics Inc. > + * > + * Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> > + * Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org> > + * > + * Licensed under the GPL-2. > + */ > + > +#ifndef ST_LSM6DSX_H > +#define ST_LSM6DSX_H > + > +#include <linux/device.h> > + > +#define ST_LSM6DS3_DEV_NAME "lsm6ds3" > +#define ST_LSM6DSM_DEV_NAME "lsm6dsm" > + > +#define ST_LSM6DSX_CHAN_SIZE 2 > +#define ST_LSM6DSX_SAMPLE_SIZE 6 > +#define ST_LSM6DSX_SAMPLE_DEPTH (ST_LSM6DSX_SAMPLE_SIZE / \ > + ST_LSM6DSX_CHAN_SIZE) > + > +#define ST_LSM6DSX_RX_MAX_LENGTH 8 > +#define ST_LSM6DSX_TX_MAX_LENGTH 8 > + > +struct st_lsm6dsx_transfer_buffer { > + u8 rx_buf[ST_LSM6DSX_RX_MAX_LENGTH]; > + u8 tx_buf[ST_LSM6DSX_TX_MAX_LENGTH] ____cacheline_aligned; > +}; > + > +struct st_lsm6dsx_transfer_function { > + int (*read)(struct device *dev, u8 addr, int len, u8 *data); > + int (*write)(struct device *dev, u8 addr, int len, u8 *data); > +}; > + > +struct st_lsm6dsx_reg { > + u8 addr; > + u8 mask; > +}; > + > +struct st_lsm6dsx_settings { > + u8 wai; > + u16 max_fifo_size; > +}; > + > +enum st_lsm6dsx_sensor_id { > + ST_LSM6DSX_ID_ACC, > + ST_LSM6DSX_ID_GYRO, > + ST_LSM6DSX_ID_MAX, > +}; > + > +enum st_lsm6dsx_fifo_mode { > + ST_LSM6DSX_FIFO_BYPASS = 0x0, > + ST_LSM6DSX_FIFO_CONT = 0x6, > +}; > + > +/** > + * struct st_lsm6dsx_sensor - ST IMU sensor instance > + * @id: Sensor identifier. > + * @hw: Pointer to instance of struct st_lsm6dsx_hw. > + * @gain: Configured sensor sensitivity. > + * @odr: Output data rate of the sensor [Hz]. > + * @watermark: Sensor watermark level. > + * @sip: Number of samples in a given pattern. > + * @decimator: FIFO decimation factor. > + * @decimator_mask: Sensor mask for decimation register. > + * @delta_ts: Delta time between two consecutive interrupts. > + * @ts: Latest timestamp from the interrupt handler. > + */ > +struct st_lsm6dsx_sensor { > + enum st_lsm6dsx_sensor_id id; > + struct st_lsm6dsx_hw *hw; > + > + u32 gain; > + u16 odr; > + > + u16 watermark; > + u8 sip; > + u8 decimator; > + u8 decimator_mask; > + > + s64 delta_ts; > + s64 ts; > +}; > + > +/** > + * struct st_lsm6dsx_hw - ST IMU MEMS hw instance > + * @name: Pointer to the device name (I2C name or SPI modalias). > + * @dev: Pointer to instance of struct device (I2C or SPI). > + * @irq: Device interrupt line (I2C or SPI). > + * @lock: Mutex to protect read and write operations. > + * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO. > + * @fifo_mode: FIFO operating mode supported by the device. > + * @enable_mask: Enabled sensor bitmask. > + * @sip: Total number of samples (acc/gyro) in a given pattern. > + * @iio_devs: Pointers to acc/gyro iio_dev instances. > + * @settings: Pointer to the specific sensor settings in use. > + * @tf: Transfer function structure used by I/O operations. > + * @tb: Transfer buffers used by SPI I/O operations. > + */ > +struct st_lsm6dsx_hw { > + const char *name; > + struct device *dev; > + int irq; > + > + struct mutex lock; > + struct mutex fifo_lock; > + > + enum st_lsm6dsx_fifo_mode fifo_mode; > + u8 enable_mask; > + u8 sip; > + > + struct iio_dev *iio_devs[ST_LSM6DSX_ID_MAX]; > + > + const struct st_lsm6dsx_settings *settings; > + > + const struct st_lsm6dsx_transfer_function *tf; > + struct st_lsm6dsx_transfer_buffer tb; > +}; > + > +int st_lsm6dsx_probe(struct st_lsm6dsx_hw *hw); > +int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor); > +int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor); > +int st_lsm6dsx_allocate_buffers(struct st_lsm6dsx_hw *hw); > +int st_lsm6dsx_write_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, u8 mask, > + u8 val); > +int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, > + u16 watermark); > + > +#endif /* ST_LSM6DSX_H */ > + > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > new file mode 100644 > index 0000000..7f4032d > --- /dev/null > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c > @@ -0,0 +1,437 @@ > +/* > + * STMicroelectronics st_lsm6dsx FIFO buffer library driver > + * > + * LSM6DS3/LSM6DSM: The FIFO buffer can be configured to store data > + * from gyroscope and accelerometer. Samples are queued without any tag > + * according to a specific pattern based on 'FIFO data sets' (6 bytes each): > + * - 1st data set is reserved for gyroscope data > + * - 2nd data set is reserved for accelerometer data > + * The FIFO pattern changes depending on the ODRs and decimation factors > + * assigned to the FIFO data sets. The first sequence of data stored in FIFO > + * buffer contains the data of all the enabled FIFO data sets > + * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the > + * value of the decimation factor and ODR set for each FIFO data set. > + * FIFO supported modes: > + * - BYPASS: FIFO disabled > + * - CONTINUOUS: FIFO enabled. When the buffer is full, the FIFO index > + * restarts from the beginning and the oldest sample is overwritten > + * > + * Copyright 2016 STMicroelectronics Inc. > + * > + * Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> > + * Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org> > + * > + * Licensed under the GPL-2. > + */ > +#include <linux/module.h> > +#include <linux/interrupt.h> > +#include <linux/irq.h> > +#include <linux/iio/kfifo_buf.h> > + > +#include "st_lsm6dsx.h" > + > +#define ST_LSM6DSX_REG_FIFO_THL_ADDR 0x06 > +#define ST_LSM6DSX_REG_FIFO_THH_ADDR 0x07 > +#define ST_LSM6DSX_FIFO_TH_MASK GENMASK(11, 0) > +#define ST_LSM6DSX_REG_FIFO_DEC_GXL_ADDR 0x08 > +#define ST_LSM6DSX_REG_FIFO_MODE_ADDR 0x0a > +#define ST_LSM6DSX_FIFO_MODE_MASK GENMASK(2, 0) > +#define ST_LSM6DSX_FIFO_ODR_MASK GENMASK(6, 3) > +#define ST_LSM6DSX_REG_FIFO_DIFFL_ADDR 0x3a > +#define ST_LSM6DSX_FIFO_DIFF_MASK GENMASK(11, 0) > +#define ST_LSM6DSX_FIFO_EMPTY_MASK BIT(12) > +#define ST_LSM6DSX_REG_FIFO_OUTL_ADDR 0x3e > + > +#define ST_LSM6DSX_MAX_FIFO_ODR_VAL 0x08 > + > +struct st_lsm6dsx_decimator_entry { > + u8 decimator; > + u8 val; > +}; > + > +static const > +struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = { > + { 0, 0x0 }, > + { 1, 0x1 }, > + { 2, 0x2 }, > + { 3, 0x3 }, > + { 4, 0x4 }, > + { 8, 0x5 }, > + { 16, 0x6 }, > + { 32, 0x7 }, > +}; > + > +static int st_lsm6dsx_get_decimator_val(u8 val) > +{ > + const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table); > + int i; > + > + for (i = 0; i < max_size; i++) > + if (st_lsm6dsx_decimator_table[i].decimator == val) > + break; > + > + return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val; > +} > + > +static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw, > + u16 *max_odr, u16 *min_odr) > +{ > + struct st_lsm6dsx_sensor *sensor; > + int i; > + > + *max_odr = 0, *min_odr = ~0; > + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { > + sensor = iio_priv(hw->iio_devs[i]); > + > + if (!(hw->enable_mask & BIT(sensor->id))) > + continue; > + > + *max_odr = max_t(u16, *max_odr, sensor->odr); > + *min_odr = min_t(u16, *min_odr, sensor->odr); > + } > +} > + > +static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw) > +{ > + struct st_lsm6dsx_sensor *sensor; > + u16 max_odr, min_odr, sip = 0; > + int err, i; > + u8 data; > + > + st_lsm6dsx_get_max_min_odr(hw, &max_odr, &min_odr); > + > + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { > + sensor = iio_priv(hw->iio_devs[i]); > + > + /* update fifo decimators and sample in pattern */ > + if (hw->enable_mask & BIT(sensor->id)) { > + sensor->sip = sensor->odr / min_odr; > + sensor->decimator = max_odr / sensor->odr; > + data = st_lsm6dsx_get_decimator_val(sensor->decimator); > + } else { > + sensor->sip = 0; > + sensor->decimator = 0; > + data = 0; > + } > + > + err = st_lsm6dsx_write_with_mask(hw, > + ST_LSM6DSX_REG_FIFO_DEC_GXL_ADDR, > + sensor->decimator_mask, data); > + if (err < 0) > + return err; > + > + sip += sensor->sip; > + } > + hw->sip = sip; > + > + return 0; > +} > + > +static int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw, > + enum st_lsm6dsx_fifo_mode fifo_mode) > +{ > + u8 data; > + int err; > + > + switch (fifo_mode) { > + case ST_LSM6DSX_FIFO_BYPASS: > + data = fifo_mode; > + break; > + case ST_LSM6DSX_FIFO_CONT: > + data = (ST_LSM6DSX_MAX_FIFO_ODR_VAL << > + __ffs(ST_LSM6DSX_FIFO_ODR_MASK)) | fifo_mode; > + break; > + default: > + return -EINVAL; > + } > + > + err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_FIFO_MODE_ADDR, > + sizeof(data), &data); > + if (err < 0) > + return err; > + > + hw->fifo_mode = fifo_mode; > + > + return 0; > +} > + > +int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark) > +{ > + u16 fifo_watermark = ~0, cur_watermark, sip = 0; > + struct st_lsm6dsx_hw *hw = sensor->hw; > + struct st_lsm6dsx_sensor *cur_sensor; > + __le16 wdata; > + int i, err; > + u8 data; > + > + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { > + cur_sensor = iio_priv(hw->iio_devs[i]); > + > + if (!(hw->enable_mask & BIT(cur_sensor->id))) > + continue; > + > + cur_watermark = (cur_sensor == sensor) ? watermark > + : cur_sensor->watermark; > + > + fifo_watermark = min_t(u16, fifo_watermark, cur_watermark); > + sip += cur_sensor->sip; > + } > + > + if (!sip) > + return 0; > + > + fifo_watermark = max_t(u16, fifo_watermark, sip); > + fifo_watermark = (fifo_watermark / sip) * sip; > + fifo_watermark = fifo_watermark * ST_LSM6DSX_SAMPLE_DEPTH; > + > + mutex_lock(&hw->lock); > + > + err = hw->tf->read(hw->dev, ST_LSM6DSX_REG_FIFO_THH_ADDR, > + sizeof(data), &data); > + if (err < 0) > + goto out; > + > + fifo_watermark = ((data & ~ST_LSM6DSX_FIFO_TH_MASK) << 8) | > + (fifo_watermark & ST_LSM6DSX_FIFO_TH_MASK); > + > + wdata = cpu_to_le16(fifo_watermark); > + err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_FIFO_THL_ADDR, > + sizeof(wdata), (u8 *)&wdata); > +out: > + mutex_unlock(&hw->lock); > + > + return err < 0 ? err : 0; > +} > + > +/** > + * st_lsm6dsx_read_fifo() - LSM6DS3-LSM6DSM read FIFO routine > + * @hw: Pointer to instance of struct st_lsm6dsx_hw. > + * > + * Read samples from the hw FIFO and push them to IIO buffers. > + * > + * Return: Number of bytes read from the FIFO > + */ > +static int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw) > +{ > + u8 buff[ALIGN(ST_LSM6DSX_SAMPLE_SIZE, sizeof(s64)) + sizeof(s64)]; > + u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE; > + struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor; > + s64 acc_ts, acc_delta_ts, gyro_ts, gyro_delta_ts; > + int err, acc_sip, gyro_sip, read_len, samples; > + __le16 fifo_status; > + > + err = hw->tf->read(hw->dev, ST_LSM6DSX_REG_FIFO_DIFFL_ADDR, > + sizeof(fifo_status), (u8 *)&fifo_status); > + if (err < 0) > + return err; > + > + if (fifo_status & cpu_to_le16(ST_LSM6DSX_FIFO_EMPTY_MASK)) > + return 0; > + > + fifo_len = (le16_to_cpu(fifo_status) & ST_LSM6DSX_FIFO_DIFF_MASK) * > + ST_LSM6DSX_CHAN_SIZE; > + samples = fifo_len / ST_LSM6DSX_SAMPLE_SIZE; > + fifo_len = (fifo_len / pattern_len) * pattern_len; > + > + /* > + * compute delta timestamp between two consecutive samples > + * in order to estimate queueing time of data generated > + * by the sensor > + */ > + acc_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); > + acc_ts = acc_sensor->ts - acc_sensor->delta_ts; > + acc_delta_ts = div_s64(acc_sensor->delta_ts * acc_sensor->decimator, > + samples); > + > + gyro_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]); > + gyro_ts = gyro_sensor->ts - gyro_sensor->delta_ts; > + gyro_delta_ts = div_s64(gyro_sensor->delta_ts * gyro_sensor->decimator, > + samples); > + > + for (read_len = 0; read_len < fifo_len; read_len += pattern_len) { > + gyro_sip = gyro_sensor->sip; > + acc_sip = acc_sensor->sip; > + It might be worth adding a description fo the data pattern here as well. Good to have it next to the code. I think I follow how this works, but am none too sure! > + while (acc_sip > 0 || gyro_sip > 0) { > + if (gyro_sip-- > 0) { > + err = hw->tf->read(hw->dev, > + ST_LSM6DSX_REG_FIFO_OUTL_ADDR, > + ST_LSM6DSX_SAMPLE_SIZE, buff); > + if (err < 0) > + return err; > + > + iio_push_to_buffers_with_timestamp( > + hw->iio_devs[ST_LSM6DSX_ID_GYRO], > + buff, gyro_ts); > + gyro_ts += gyro_delta_ts; > + } > + > + if (acc_sip-- > 0) { > + err = hw->tf->read(hw->dev, > + ST_LSM6DSX_REG_FIFO_OUTL_ADDR, > + ST_LSM6DSX_SAMPLE_SIZE, buff); > + if (err < 0) > + return err; > + > + iio_push_to_buffers_with_timestamp( > + hw->iio_devs[ST_LSM6DSX_ID_ACC], > + buff, acc_ts); > + acc_ts += acc_delta_ts; > + } > + } > + } > + > + return read_len; > +} > + > +static int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw) > +{ > + int err; > + > + mutex_lock(&hw->fifo_lock); > + > + st_lsm6dsx_read_fifo(hw); > + err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_BYPASS); > + > + mutex_unlock(&hw->fifo_lock); > + > + return err; > +} > + > +static int st_lsm6dsx_update_fifo(struct iio_dev *iio_dev, bool enable) > +{ > + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); > + struct st_lsm6dsx_hw *hw = sensor->hw; > + int err; > + > + if (hw->fifo_mode != ST_LSM6DSX_FIFO_BYPASS) { > + err = st_lsm6dsx_flush_fifo(hw); > + if (err < 0) > + return err; > + } > + > + if (enable) { > + err = st_lsm6dsx_sensor_enable(sensor); > + if (err < 0) > + return err; > + } else { > + err = st_lsm6dsx_sensor_disable(sensor); > + if (err < 0) > + return err; > + } > + > + err = st_lsm6dsx_update_decimators(hw); > + if (err < 0) > + return err; > + > + err = st_lsm6dsx_update_watermark(sensor, sensor->watermark); > + if (err < 0) > + return err; > + > + if (hw->enable_mask) { > + err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT); > + if (err < 0) > + return err; > + > + /* > + * store enable buffer timestamp as reference to compute > + * first delta timestamp > + */ > + sensor->ts = iio_get_time_ns(iio_dev); > + } > + > + return 0; > +} > + > +static irqreturn_t st_lsm6dsx_handler_irq(int irq, void *private) > +{ > + struct st_lsm6dsx_hw *hw = (struct st_lsm6dsx_hw *)private; > + struct st_lsm6dsx_sensor *sensor; > + int i; > + > + if (!hw->sip) > + return IRQ_NONE; > + > + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { > + sensor = iio_priv(hw->iio_devs[i]); > + > + if (sensor->sip > 0) { > + s64 timestamp; > + > + timestamp = iio_get_time_ns(hw->iio_devs[i]); > + sensor->delta_ts = timestamp - sensor->ts; > + sensor->ts = timestamp; > + } > + } > + > + return IRQ_WAKE_THREAD; > +} > + > +static irqreturn_t st_lsm6dsx_handler_thread(int irq, void *private) > +{ > + struct st_lsm6dsx_hw *hw = (struct st_lsm6dsx_hw *)private; > + int count; > + > + mutex_lock(&hw->fifo_lock); > + count = st_lsm6dsx_read_fifo(hw); > + mutex_unlock(&hw->fifo_lock); > + > + return !count ? IRQ_NONE : IRQ_HANDLED; > +} > + > +static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev) > +{ > + return st_lsm6dsx_update_fifo(iio_dev, true); > +} > + > +static int st_lsm6dsx_buffer_postdisable(struct iio_dev *iio_dev) > +{ > + return st_lsm6dsx_update_fifo(iio_dev, false); > +} > + > +static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = { > + .preenable = st_lsm6dsx_buffer_preenable, > + .postdisable = st_lsm6dsx_buffer_postdisable, > +}; > + > +int st_lsm6dsx_allocate_buffers(struct st_lsm6dsx_hw *hw) Consider renaming this function as it does a lot more than allocating the buffers (such as requesting irqs) > +{ > + struct iio_buffer *buffer; > + unsigned long irq_type; > + int i, err; > + > + irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq)); > + > + switch (irq_type) { > + case IRQF_TRIGGER_HIGH: > + case IRQF_TRIGGER_RISING: > + break; > + default: > + dev_info(hw->dev, "mode %lx unsupported\n", irq_type); > + return -EINVAL; > + } > + > + err = devm_request_threaded_irq(hw->dev, hw->irq, > + st_lsm6dsx_handler_irq, > + st_lsm6dsx_handler_thread, > + irq_type | IRQF_ONESHOT, > + hw->name, hw); > + if (err) { > + dev_err(hw->dev, "failed to request trigger irq %d\n", > + hw->irq); > + return err; > + } > + > + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { > + buffer = devm_iio_kfifo_allocate(hw->dev); > + if (!buffer) > + return -ENOMEM; > + > + iio_device_attach_buffer(hw->iio_devs[i], buffer); > + hw->iio_devs[i]->modes |= INDIO_BUFFER_SOFTWARE; > + hw->iio_devs[i]->setup_ops = &st_lsm6dsx_buffer_ops; > + } > + > + return 0; > +} > + > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > new file mode 100644 > index 0000000..473315a > --- /dev/null > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c > @@ -0,0 +1,655 @@ > +/* > + * STMicroelectronics st_lsm6dsx sensor driver > + * > + * The ST LSM6DSx IMU MEMS series consists of 3D digital accelerometer > + * and 3D digital gyroscope system-in-package with a digital I2C/SPI serial > + * interface standard output. > + * LSM6DSx IMU MEMS series has a dynamic user-selectable full-scale > + * acceleration range of +-2/+-4/+-8/+-16 g and an angular rate range of > + * +-125/+-245/+-500/+-1000/+-2000 dps > + * LSM6DSx series has an integrated First-In-First-Out (FIFO) buffer > + * allowing dynamic batching of sensor data. > + * > + * Supported sensors: > + * - LSM6DS3: > + * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 > + * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 > + * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 > + * - FIFO size: 8KB > + * > + * - LSM6DSM: > + * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416 > + * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16 > + * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000 > + * - FIFO size: 4KB > + * > + * Copyright 2016 STMicroelectronics Inc. > + * > + * Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> > + * Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org> > + * > + * Licensed under the GPL-2. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/delay.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/sysfs.h> > + > +#include "st_lsm6dsx.h" > + > +#define ST_LSM6DSX_REG_ACC_DEC_MASK GENMASK(2, 0) > +#define ST_LSM6DSX_REG_GYRO_DEC_MASK GENMASK(5, 3) > +#define ST_LSM6DSX_REG_INT1_ADDR 0x0d > +#define ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK BIT(3) > +#define ST_LSM6DSX_REG_WHOAMI_ADDR 0x0f > +#define ST_LSM6DSX_REG_RESET_ADDR 0x12 > +#define ST_LSM6DSX_REG_RESET_MASK BIT(0) > +#define ST_LSM6DSX_REG_BDU_ADDR 0x12 > +#define ST_LSM6DSX_REG_BDU_MASK BIT(6) > +#define ST_LSM6DSX_REG_INT2_ON_INT1_ADDR 0x13 > +#define ST_LSM6DSX_REG_INT2_ON_INT1_MASK BIT(5) > +#define ST_LSM6DSX_REG_ROUNDING_ADDR 0x16 > +#define ST_LSM6DSX_REG_ROUNDING_MASK BIT(2) > +#define ST_LSM6DSX_REG_LIR_ADDR 0x58 > +#define ST_LSM6DSX_REG_LIR_MASK BIT(0) > + > +#define ST_LSM6DSX_REG_ACC_ODR_ADDR 0x10 > +#define ST_LSM6DSX_REG_ACC_ODR_MASK GENMASK(7, 4) > +#define ST_LSM6DSX_REG_ACC_FS_ADDR 0x10 > +#define ST_LSM6DSX_REG_ACC_FS_MASK GENMASK(3, 2) > +#define ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR 0x28 > +#define ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR 0x2a > +#define ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR 0x2c > + > +#define ST_LSM6DSX_REG_GYRO_ODR_ADDR 0x11 > +#define ST_LSM6DSX_REG_GYRO_ODR_MASK GENMASK(7, 4) > +#define ST_LSM6DSX_REG_GYRO_FS_ADDR 0x11 > +#define ST_LSM6DSX_REG_GYRO_FS_MASK GENMASK(3, 2) > +#define ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR 0x22 > +#define ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR 0x24 > +#define ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR 0x26 > + > +#define ST_LSM6DS3_WHOAMI 0x69 > +#define ST_LSM6DSM_WHOAMI 0x6a > + > +#define ST_LSM6DS3_MAX_FIFO_SIZE 8192 > +#define ST_LSM6DSM_MAX_FIFO_SIZE 4096 > + > +#define ST_LSM6DSX_ACC_FS_2G_GAIN IIO_G_TO_M_S_2(61) > +#define ST_LSM6DSX_ACC_FS_4G_GAIN IIO_G_TO_M_S_2(122) > +#define ST_LSM6DSX_ACC_FS_8G_GAIN IIO_G_TO_M_S_2(244) > +#define ST_LSM6DSX_ACC_FS_16G_GAIN IIO_G_TO_M_S_2(488) > + > +#define ST_LSM6DSX_GYRO_FS_245_GAIN IIO_DEGREE_TO_RAD(4375) > +#define ST_LSM6DSX_GYRO_FS_500_GAIN IIO_DEGREE_TO_RAD(8750) > +#define ST_LSM6DSX_GYRO_FS_1000_GAIN IIO_DEGREE_TO_RAD(17500) > +#define ST_LSM6DSX_GYRO_FS_2000_GAIN IIO_DEGREE_TO_RAD(70000) > + > +struct st_lsm6dsx_odr { > + u16 hz; > + u8 val; > +}; > + > +#define ST_LSM6DSX_ODR_LIST_SIZE 6 > +struct st_lsm6dsx_odr_table_entry { > + struct st_lsm6dsx_reg reg; > + struct st_lsm6dsx_odr odr_avl[ST_LSM6DSX_ODR_LIST_SIZE]; > +}; > + > +static const struct st_lsm6dsx_odr_table_entry st_lsm6dsx_odr_table[] = { > + [ST_LSM6DSX_ID_ACC] = { > + .reg = { > + .addr = ST_LSM6DSX_REG_ACC_ODR_ADDR, > + .mask = ST_LSM6DSX_REG_ACC_ODR_MASK, > + }, > + .odr_avl[0] = { 13, 0x01 }, > + .odr_avl[1] = { 26, 0x02 }, > + .odr_avl[2] = { 52, 0x03 }, > + .odr_avl[3] = { 104, 0x04 }, > + .odr_avl[4] = { 208, 0x05 }, > + .odr_avl[5] = { 416, 0x06 }, > + }, > + [ST_LSM6DSX_ID_GYRO] = { > + .reg = { > + .addr = ST_LSM6DSX_REG_GYRO_ODR_ADDR, > + .mask = ST_LSM6DSX_REG_GYRO_ODR_MASK, > + }, > + .odr_avl[0] = { 13, 0x01 }, > + .odr_avl[1] = { 26, 0x02 }, > + .odr_avl[2] = { 52, 0x03 }, > + .odr_avl[3] = { 104, 0x04 }, > + .odr_avl[4] = { 208, 0x05 }, > + .odr_avl[5] = { 416, 0x06 }, > + } > +}; > + > +struct st_lsm6dsx_fs { > + u32 gain; > + u8 val; > +}; > + > +#define ST_LSM6DSX_FS_LIST_SIZE 4 > +struct st_lsm6dsx_fs_table_entry { > + struct st_lsm6dsx_reg reg; > + struct st_lsm6dsx_fs fs_avl[ST_LSM6DSX_FS_LIST_SIZE]; > +}; > + > +static const struct st_lsm6dsx_fs_table_entry st_lsm6dsx_fs_table[] = { > + [ST_LSM6DSX_ID_ACC] = { > + .reg = { > + .addr = ST_LSM6DSX_REG_ACC_FS_ADDR, > + .mask = ST_LSM6DSX_REG_ACC_FS_MASK, > + }, > + .fs_avl[0] = { ST_LSM6DSX_ACC_FS_2G_GAIN, 0x0 }, > + .fs_avl[1] = { ST_LSM6DSX_ACC_FS_4G_GAIN, 0x2 }, > + .fs_avl[2] = { ST_LSM6DSX_ACC_FS_8G_GAIN, 0x3 }, > + .fs_avl[3] = { ST_LSM6DSX_ACC_FS_16G_GAIN, 0x1 }, > + }, > + [ST_LSM6DSX_ID_GYRO] = { > + .reg = { > + .addr = ST_LSM6DSX_REG_GYRO_FS_ADDR, > + .mask = ST_LSM6DSX_REG_GYRO_FS_MASK, > + }, > + .fs_avl[0] = { ST_LSM6DSX_GYRO_FS_245_GAIN, 0x0 }, > + .fs_avl[1] = { ST_LSM6DSX_GYRO_FS_500_GAIN, 0x1 }, > + .fs_avl[2] = { ST_LSM6DSX_GYRO_FS_1000_GAIN, 0x2 }, > + .fs_avl[3] = { ST_LSM6DSX_GYRO_FS_2000_GAIN, 0x3 }, > + } > +}; > + > +static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = { > + { > + .wai = ST_LSM6DS3_WHOAMI, > + .max_fifo_size = ST_LSM6DS3_MAX_FIFO_SIZE, > + }, > + { > + .wai = ST_LSM6DSM_WHOAMI, > + .max_fifo_size = ST_LSM6DSM_MAX_FIFO_SIZE, > + }, > +}; > + > +#define ST_LSM6DSX_CHANNEL(chan_type, addr, mod, scan_idx) \ > +{ \ > + .type = chan_type, \ > + .address = addr, \ > + .modified = 1, \ > + .channel2 = mod, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ > + BIT(IIO_CHAN_INFO_SCALE), \ > + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \ > + .scan_index = scan_idx, \ > + .scan_type = { \ > + .sign = 's', \ > + .realbits = 16, \ > + .storagebits = 16, \ > + .endianness = IIO_LE, \ > + }, \ > +} > + > +static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = { > + ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_X_L_ADDR, > + IIO_MOD_X, 0), > + ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Y_L_ADDR, > + IIO_MOD_Y, 1), > + ST_LSM6DSX_CHANNEL(IIO_ACCEL, ST_LSM6DSX_REG_ACC_OUT_Z_L_ADDR, > + IIO_MOD_Z, 2), > + IIO_CHAN_SOFT_TIMESTAMP(3), > +}; > + > +static const struct iio_chan_spec st_lsm6dsx_gyro_channels[] = { > + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_X_L_ADDR, > + IIO_MOD_X, 0), > + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Y_L_ADDR, > + IIO_MOD_Y, 1), > + ST_LSM6DSX_CHANNEL(IIO_ANGL_VEL, ST_LSM6DSX_REG_GYRO_OUT_Z_L_ADDR, > + IIO_MOD_Z, 2), > + IIO_CHAN_SOFT_TIMESTAMP(3), > +}; > + > +int st_lsm6dsx_write_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, u8 mask, > + u8 val) > +{ > + u8 data; > + int err; > + > + mutex_lock(&hw->lock); > + > + err = hw->tf->read(hw->dev, addr, sizeof(data), &data); > + if (err < 0) { > + dev_err(hw->dev, "failed to read %02x register\n", addr); > + goto out; > + } > + > + data = (data & ~mask) | ((val << __ffs(mask)) & mask); > + > + err = hw->tf->write(hw->dev, addr, sizeof(data), &data); > + if (err < 0) > + dev_err(hw->dev, "failed to write %02x register\n", addr); > + > +out: > + mutex_unlock(&hw->lock); > + > + return err; > +} > + > +static int st_lsm6dsx_check_whoami(struct st_lsm6dsx_hw *hw) > +{ > + int err, i; > + u8 data; > + > + err = hw->tf->read(hw->dev, ST_LSM6DSX_REG_WHOAMI_ADDR, sizeof(data), > + &data); > + if (err < 0) { > + dev_err(hw->dev, "failed to read whoami register\n"); > + return err; > + } > + > + for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_sensor_settings); i++) { > + if (data == st_lsm6dsx_sensor_settings[i].wai) { > + hw->settings = &st_lsm6dsx_sensor_settings[i]; > + break; Normally we would sanity check that the expected whoami was the one read. Here you are matching against all supported parts. As we know what we are expecting it would be nice to at least kick out a warning if we infact find another supported part. This would require you to pass through the enum element from the enum suggested in the spi driver review below. > + } > + } > + > + if (i == ARRAY_SIZE(st_lsm6dsx_sensor_settings)) { > + dev_err(hw->dev, "unsupported whoami [%02x]\n", data); > + return -ENODEV; > + } > + > + return 0; > +} > + > +static int st_lsm6dsx_set_full_scale(struct st_lsm6dsx_sensor *sensor, > + u32 gain) > +{ > + enum st_lsm6dsx_sensor_id id = sensor->id; > + int i, err; > + u8 val; > + > + for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) > + if (st_lsm6dsx_fs_table[id].fs_avl[i].gain == gain) > + break; > + > + if (i == ST_LSM6DSX_FS_LIST_SIZE) > + return -EINVAL; > + > + val = st_lsm6dsx_fs_table[id].fs_avl[i].val; > + err = st_lsm6dsx_write_with_mask(sensor->hw, > + st_lsm6dsx_fs_table[id].reg.addr, > + st_lsm6dsx_fs_table[id].reg.mask, > + val); > + if (err < 0) > + return err; > + > + sensor->gain = gain; > + > + return 0; > +} > + > +static int st_lsm6dsx_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr) > +{ > + enum st_lsm6dsx_sensor_id id = sensor->id; > + int i, err; > + u8 val; > + > + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) > + if (st_lsm6dsx_odr_table[id].odr_avl[i].hz == odr) > + break; > + > + if (i == ST_LSM6DSX_ODR_LIST_SIZE) > + return -EINVAL; > + > + val = st_lsm6dsx_odr_table[id].odr_avl[i].val; > + err = st_lsm6dsx_write_with_mask(sensor->hw, > + st_lsm6dsx_odr_table[id].reg.addr, > + st_lsm6dsx_odr_table[id].reg.mask, > + val); > + if (err < 0) > + return err; > + > + sensor->odr = odr; > + > + return 0; > +} > + > +int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor) > +{ > + int err; > + > + err = st_lsm6dsx_set_odr(sensor, sensor->odr); > + if (err < 0) > + return err; > + > + sensor->hw->enable_mask |= BIT(sensor->id); > + > + return 0; > +} > + > +int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor) > +{ > + enum st_lsm6dsx_sensor_id id = sensor->id; > + int err; > + > + err = st_lsm6dsx_write_with_mask(sensor->hw, > + st_lsm6dsx_odr_table[id].reg.addr, > + st_lsm6dsx_odr_table[id].reg.mask, 0); > + if (err < 0) > + return err; > + > + sensor->hw->enable_mask &= ~BIT(id); > + > + return 0; > +} > + > +static int st_lsm6dsx_read_oneshot(struct st_lsm6dsx_sensor *sensor, > + u8 addr, int *val) > +{ > + int err, delay; > + __le16 data; > + > + err = st_lsm6dsx_sensor_enable(sensor); > + if (err < 0) > + return err; > + > + delay = 1000000 / sensor->odr; > + usleep_range(delay, 2 * delay); > + > + err = sensor->hw->tf->read(sensor->hw->dev, addr, sizeof(data), > + (u8 *)&data); > + if (err < 0) > + return err; > + > + st_lsm6dsx_sensor_disable(sensor); > + > + *val = (s16)data; > + > + return IIO_VAL_INT; > +} > + > +static int st_lsm6dsx_read_raw(struct iio_dev *iio_dev, > + struct iio_chan_spec const *ch, > + int *val, int *val2, long mask) > +{ > + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); > + int ret; > + > + ret = iio_device_claim_direct_mode(iio_dev); > + if (ret) > + return ret; This feels like overkill. You are protecting elements that shouldn't need such heavy handed protection. This prevent syou reading the sampling frequency or scale whilst the buffer is enabled. I'd move the claim and release to being just within the _RAW element of the switch. > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW: > + ret = st_lsm6dsx_read_oneshot(sensor, ch->address, val); > + break; > + case IIO_CHAN_INFO_SAMP_FREQ: > + *val = sensor->odr; > + ret = IIO_VAL_INT; > + break; > + case IIO_CHAN_INFO_SCALE: > + *val = 0; > + *val2 = sensor->gain; > + ret = IIO_VAL_INT_PLUS_MICRO; > + break; > + default: > + ret = -EINVAL; > + break; > + } > + > + iio_device_release_direct_mode(iio_dev); > + > + return ret; > +} > + > +static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev, > + struct iio_chan_spec const *chan, > + int val, int val2, long mask) > +{ > + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); > + int err; > + > + err = iio_device_claim_direct_mode(iio_dev); > + if (err) > + return err; > + > + switch (mask) { > + case IIO_CHAN_INFO_SCALE: > + err = st_lsm6dsx_set_full_scale(sensor, val2); > + break; > + case IIO_CHAN_INFO_SAMP_FREQ: > + err = st_lsm6dsx_set_odr(sensor, val); > + break; > + default: > + err = -EINVAL; > + break; > + } > + > + iio_device_release_direct_mode(iio_dev); > + > + return err; > +} > + > +static int st_lsm6dsx_set_watermark(struct iio_dev *iio_dev, unsigned int val) > +{ > + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); > + struct st_lsm6dsx_hw *hw = sensor->hw; > + int err, max_fifo_len; > + > + max_fifo_len = hw->settings->max_fifo_size / ST_LSM6DSX_SAMPLE_SIZE; > + if (val < 1 || val > max_fifo_len) > + return -EINVAL; > + > + err = st_lsm6dsx_update_watermark(sensor, val); > + if (err < 0) > + return err; > + > + sensor->watermark = val; > + > + return 0; > +} > + > +static ssize_t > +st_lsm6dsx_sysfs_sampling_frequency_avail(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); > + enum st_lsm6dsx_sensor_id id = sensor->id; > + int i, len = 0; > + > + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) > + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", > + st_lsm6dsx_odr_table[id].odr_avl[i].hz); > + buf[len - 1] = '\n'; > + > + return len; > +} > + > +static ssize_t st_lsm6dsx_sysfs_scale_avail(struct device *dev, > + struct device_attribute *attr, > + char *buf) > +{ > + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); > + enum st_lsm6dsx_sensor_id id = sensor->id; > + int i, len = 0; > + > + for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) > + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", > + st_lsm6dsx_fs_table[id].fs_avl[i].gain); > + buf[len - 1] = '\n'; > + > + return len; > +} > + > +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_sysfs_sampling_frequency_avail); > +static IIO_DEVICE_ATTR(in_accel_scale_available, 0444, > + st_lsm6dsx_sysfs_scale_avail, NULL, 0); > +static IIO_DEVICE_ATTR(in_anglvel_scale_available, 0444, > + st_lsm6dsx_sysfs_scale_avail, NULL, 0); > + > +static struct attribute *st_lsm6dsx_acc_attributes[] = { > + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, > + &iio_dev_attr_in_accel_scale_available.dev_attr.attr, > + NULL, > +}; > + > +static const struct attribute_group st_lsm6dsx_acc_attribute_group = { > + .attrs = st_lsm6dsx_acc_attributes, > +}; > + > +static const struct iio_info st_lsm6dsx_acc_info = { > + .driver_module = THIS_MODULE, > + .attrs = &st_lsm6dsx_acc_attribute_group, > + .read_raw = st_lsm6dsx_read_raw, > + .write_raw = st_lsm6dsx_write_raw, > + .hwfifo_set_watermark = st_lsm6dsx_set_watermark, > +}; > + > +static struct attribute *st_lsm6dsx_gyro_attributes[] = { > + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, > + &iio_dev_attr_in_anglvel_scale_available.dev_attr.attr, > + NULL, > +}; > + > +static const struct attribute_group st_lsm6dsx_gyro_attribute_group = { > + .attrs = st_lsm6dsx_gyro_attributes, > +}; > + > +static const struct iio_info st_lsm6dsx_gyro_info = { > + .driver_module = THIS_MODULE, > + .attrs = &st_lsm6dsx_gyro_attribute_group, > + .read_raw = st_lsm6dsx_read_raw, > + .write_raw = st_lsm6dsx_write_raw, > + .hwfifo_set_watermark = st_lsm6dsx_set_watermark, > +}; > + > +static const unsigned long st_lsm6dsx_available_scan_masks[] = {0x7, 0x0}; > + > +static int st_lsm6dsx_init_device(struct st_lsm6dsx_hw *hw) > +{ > + int err; > + u8 data; > + > + data = ST_LSM6DSX_REG_RESET_MASK; > + err = hw->tf->write(hw->dev, ST_LSM6DSX_REG_RESET_ADDR, sizeof(data), > + &data); > + if (err < 0) > + return err; > + > + msleep(200); > + > + /* latch interrupts */ > + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_LIR_ADDR, > + ST_LSM6DSX_REG_LIR_MASK, 1); > + if (err < 0) > + return err; > + > + /* enable Block Data Update */ > + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_BDU_ADDR, > + ST_LSM6DSX_REG_BDU_MASK, 1); > + if (err < 0) > + return err; > + > + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_ROUNDING_ADDR, > + ST_LSM6DSX_REG_ROUNDING_MASK, 1); > + if (err < 0) > + return err; > + > + /* enable FIFO watermak interrupt */ > + err = st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_INT1_ADDR, > + ST_LSM6DSX_REG_FIFO_FTH_IRQ_MASK, 1); > + if (err < 0) > + return err; > + > + /* redirect INT2 on INT1 */ > + return st_lsm6dsx_write_with_mask(hw, ST_LSM6DSX_REG_INT2_ON_INT1_ADDR, > + ST_LSM6DSX_REG_INT2_ON_INT1_MASK, 1); > +} > + > +static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw, > + enum st_lsm6dsx_sensor_id id) > +{ > + struct st_lsm6dsx_sensor *sensor; > + struct iio_dev *iio_dev; > + > + iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor)); > + if (!iio_dev) > + return NULL; > + > + iio_dev->modes = INDIO_DIRECT_MODE; > + iio_dev->dev.parent = hw->dev; > + iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks; > + > + sensor = iio_priv(iio_dev); > + sensor->id = id; > + sensor->hw = hw; > + sensor->odr = st_lsm6dsx_odr_table[id].odr_avl[0].hz; > + sensor->gain = st_lsm6dsx_fs_table[id].fs_avl[0].gain; > + sensor->watermark = 1; > + > + switch (id) { > + case ST_LSM6DSX_ID_ACC: > + iio_dev->channels = st_lsm6dsx_acc_channels; > + iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_acc_channels); > + iio_dev->name = "lsm6dsx_accel"; > + iio_dev->info = &st_lsm6dsx_acc_info; > + > + sensor->decimator_mask = ST_LSM6DSX_REG_ACC_DEC_MASK; > + break; > + case ST_LSM6DSX_ID_GYRO: > + iio_dev->channels = st_lsm6dsx_gyro_channels; > + iio_dev->num_channels = ARRAY_SIZE(st_lsm6dsx_gyro_channels); > + iio_dev->name = "lsm6dsx_gyro"; > + iio_dev->info = &st_lsm6dsx_gyro_info; > + > + sensor->decimator_mask = ST_LSM6DSX_REG_GYRO_DEC_MASK; > + break; > + default: > + return NULL; > + } > + > + return iio_dev; > +} > + > +int st_lsm6dsx_probe(struct st_lsm6dsx_hw *hw) > +{ > + int i, err; > + > + mutex_init(&hw->lock); > + mutex_init(&hw->fifo_lock); > + > + err = st_lsm6dsx_check_whoami(hw); > + if (err < 0) > + return err; > + > + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { > + hw->iio_devs[i] = st_lsm6dsx_alloc_iiodev(hw, i); > + if (!hw->iio_devs[i]) > + return -ENOMEM; > + } > + > + err = st_lsm6dsx_init_device(hw); > + if (err < 0) > + return err; > + > + if (hw->irq > 0) { > + err = st_lsm6dsx_allocate_buffers(hw); > + if (err < 0) > + return err; > + } > + > + for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) { > + err = devm_iio_device_register(hw->dev, hw->iio_devs[i]); > + if (err) > + return err; > + } > + > + return 0; > +} > +EXPORT_SYMBOL(st_lsm6dsx_probe); > + > +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>"); > +MODULE_AUTHOR("Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org>"); > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > new file mode 100644 > index 0000000..cb9a158 > --- /dev/null > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c > @@ -0,0 +1,88 @@ > +/* > + * STMicroelectronics st_lsm6dsx i2c driver > + * > + * Copyright 2016 STMicroelectronics Inc. > + * > + * Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> > + * Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org> > + * > + * Licensed under the GPL-2. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/i2c.h> > +#include <linux/slab.h> > +#include <linux/of.h> > + > +#include "st_lsm6dsx.h" > + > +static int st_lsm6dsx_i2c_read(struct device *dev, u8 addr, int len, u8 *data) > +{ > + return i2c_smbus_read_i2c_block_data_or_emulated(to_i2c_client(dev), > + addr, len, data); > +} > + > +static int st_lsm6dsx_i2c_write(struct device *dev, u8 addr, int len, u8 *data) > +{ > + return i2c_smbus_write_i2c_block_data(to_i2c_client(dev), addr, > + len, data); > +} > + > +static const struct st_lsm6dsx_transfer_function st_lsm6dsx_transfer_fn = { > + .read = st_lsm6dsx_i2c_read, > + .write = st_lsm6dsx_i2c_write, > +}; > + > +static int st_lsm6dsx_i2c_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct st_lsm6dsx_hw *hw; > + > + hw = devm_kzalloc(&client->dev, sizeof(*hw), GFP_KERNEL); > + if (!hw) > + return -ENOMEM; > + > + i2c_set_clientdata(client, hw); > + hw->name = client->name; > + hw->dev = &client->dev; > + hw->irq = client->irq; > + hw->tf = &st_lsm6dsx_transfer_fn; > + > + return st_lsm6dsx_probe(hw); > +} > + > +static const struct of_device_id st_lsm6dsx_i2c_of_match[] = { > + { > + .compatible = "st,lsm6ds3", > + .data = ST_LSM6DS3_DEV_NAME, > + }, > + { > + .compatible = "st,lsm6dsm", > + .data = ST_LSM6DSM_DEV_NAME, > + }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match); > + > +static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = { > + { ST_LSM6DS3_DEV_NAME }, > + { ST_LSM6DSM_DEV_NAME }, > + {}, > +}; > +MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table); > + > +static struct i2c_driver st_lsm6dsx_driver = { > + .driver = { > + .name = "st_lsm6dsx_i2c", > + .of_match_table = of_match_ptr(st_lsm6dsx_i2c_of_match), > + }, > + .probe = st_lsm6dsx_i2c_probe, > + .id_table = st_lsm6dsx_i2c_id_table, > +}; > +module_i2c_driver(st_lsm6dsx_driver); > + > +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>"); > +MODULE_AUTHOR("Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org>"); > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i2c driver"); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > new file mode 100644 > index 0000000..f16eab5 > --- /dev/null > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c > @@ -0,0 +1,126 @@ > +/* > + * STMicroelectronics st_lsm6dsx spi driver > + * > + * Copyright 2016 STMicroelectronics Inc. > + * > + * Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> > + * Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org> > + * > + * Licensed under the GPL-2. > + */ > + > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/spi/spi.h> > +#include <linux/slab.h> > +#include <linux/of.h> > + > +#include "st_lsm6dsx.h" > + > +#define SENSORS_SPI_READ BIT(7) > + > +static int st_lsm6dsx_spi_read(struct device *dev, u8 addr, int len, > + u8 *data) > +{ > + struct spi_device *spi = to_spi_device(dev); > + struct st_lsm6dsx_hw *hw = spi_get_drvdata(spi); > + int err; > + > + struct spi_transfer xfers[] = { > + { > + .tx_buf = hw->tb.tx_buf, > + .bits_per_word = 8, > + .len = 1, > + }, > + { > + .rx_buf = hw->tb.rx_buf, > + .bits_per_word = 8, > + .len = len, > + } > + }; > + > + hw->tb.tx_buf[0] = addr | SENSORS_SPI_READ; > + > + err = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers)); > + if (err < 0) > + return err; > + > + memcpy(data, hw->tb.rx_buf, len * sizeof(u8)); > + > + return len; > +} > + > +static int st_lsm6dsx_spi_write(struct device *dev, u8 addr, int len, > + u8 *data) > +{ > + struct st_lsm6dsx_hw *hw; > + struct spi_device *spi; > + > + if (len >= ST_LSM6DSX_TX_MAX_LENGTH) > + return -ENOMEM; > + > + spi = to_spi_device(dev); > + hw = spi_get_drvdata(spi); > + > + hw->tb.tx_buf[0] = addr; > + memcpy(&hw->tb.tx_buf[1], data, len); > + > + return spi_write(spi, hw->tb.tx_buf, len + 1); > +} > + > +static const struct st_lsm6dsx_transfer_function st_lsm6dsx_transfer_fn = { > + .read = st_lsm6dsx_spi_read, > + .write = st_lsm6dsx_spi_write, > +}; > + > +static int st_lsm6dsx_spi_probe(struct spi_device *spi) > +{ > + struct st_lsm6dsx_hw *hw; > + > + hw = devm_kzalloc(&spi->dev, sizeof(*hw), GFP_KERNEL); > + if (!hw) > + return -ENOMEM; > + > + spi_set_drvdata(spi, hw); You could have moved this into the st_lsm6dsx_probe function by using dev_set_drvdata(spi->dev). Having done that... > + hw->name = spi->modalias; > + hw->dev = &spi->dev; > + hw->irq = spi->irq; > + hw->tf = &st_lsm6dsx_transfer_fn; I'm not convinced having the hw structure visible here adds anything useful. I'd have made the st_lsm6dsx_probe function just take the various elements as separate parameters. There would only be 4 of them and that would bring all the setting of elements of hw into one place rather than scattered as they are now. (minor point though!) > + > + return st_lsm6dsx_probe(hw); > +} > + > +static const struct of_device_id st_lsm6dsx_spi_of_match[] = { > + { > + .compatible = "st,lsm6ds3", > + .data = ST_LSM6DS3_DEV_NAME, > + }, > + { > + .compatible = "st,lsm6dsm", > + .data = ST_LSM6DSM_DEV_NAME, I would have preferred the use of an enum to using strings in here. You would have needed to provide the enum entries as data for the struct spi_device_id entries as well. This is just a bit 'unusual' and I like everything done in the predictable way ;) > + }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match); > + > +static const struct spi_device_id st_lsm6dsx_spi_id_table[] = { > + { ST_LSM6DS3_DEV_NAME }, > + { ST_LSM6DSM_DEV_NAME }, > + {}, > +}; > +MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table); > + > +static struct spi_driver st_lsm6dsx_driver = { > + .driver = { > + .name = "st_lsm6dsx_spi", > + .of_match_table = of_match_ptr(st_lsm6dsx_spi_of_match), > + }, > + .probe = st_lsm6dsx_spi_probe, > + .id_table = st_lsm6dsx_spi_id_table, > +}; > +module_spi_driver(st_lsm6dsx_driver); > + > +MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>"); > +MODULE_AUTHOR("Denis Ciocca <denis.ciocca-qxv4g6HH51o@public.gmane.org>"); > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx spi driver"); > +MODULE_LICENSE("GPL v2"); > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v3 2/2] Documentation: dt: iio: add st_lsm6dsx sensor device binding [not found] ` <20161210090218.4609-1-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> 2016-12-10 9:02 ` [PATCH v3 1/2] iio: imu: add support to lsm6dsx driver Lorenzo Bianconi @ 2016-12-10 9:02 ` Lorenzo Bianconi [not found] ` <20161210090218.4609-3-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> 1 sibling, 1 reply; 5+ messages in thread From: Lorenzo Bianconi @ 2016-12-10 9:02 UTC (permalink / raw) To: jic23-DgEjT+Ai2ygdnm+yROfE0A Cc: linux-iio-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, lorenzo.bianconi-qxv4g6HH51o Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> --- .../devicetree/bindings/iio/imu/st_lsm6dsx.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt new file mode 100644 index 0000000..ed3cdac --- /dev/null +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt @@ -0,0 +1,24 @@ +* ST_LSM6DSx driver for STM 6-axis (acc + gyro) imu Mems sensors + +Required properties: +- compatible: must be one of: + "st,lsm6ds3" + "st,lsm6dsm" +- reg: i2c address of the sensor / spi cs line + +Optional properties: +- interrupt-parent: should be the phandle for the interrupt controller +- interrupts: interrupt mapping for IRQ. It should be configured with + flags IRQ_TYPE_LEVEL_HIGH or IRQ_TYPE_EDGE_RISING. + + Refer to interrupt-controller/interrupts.txt for generic interrupt + client node bindings. + +Example: + +lsm6dsm@6b { + compatible = "st,lsm6dsm"; + reg = <0x6b>; + interrupt-parent = <&gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_RISING>; +}; -- 2.9.3 ^ permalink raw reply related [flat|nested] 5+ messages in thread
[parent not found: <20161210090218.4609-3-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>]
* Re: [PATCH v3 2/2] Documentation: dt: iio: add st_lsm6dsx sensor device binding [not found] ` <20161210090218.4609-3-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> @ 2016-12-13 19:03 ` Rob Herring 0 siblings, 0 replies; 5+ messages in thread From: Rob Herring @ 2016-12-13 19:03 UTC (permalink / raw) To: Lorenzo Bianconi Cc: jic23-DgEjT+Ai2ygdnm+yROfE0A, linux-iio-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, lorenzo.bianconi-qxv4g6HH51o On Sat, Dec 10, 2016 at 10:02:18AM +0100, Lorenzo Bianconi wrote: > Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi-qxv4g6HH51o@public.gmane.org> > --- > .../devicetree/bindings/iio/imu/st_lsm6dsx.txt | 24 ++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org> ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-12-30 16:01 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-12-10 9:02 [PATCH v3 0/2] add support to STM LSM6DS3-LSM6DSM 6-axis Mems sensor Lorenzo Bianconi
[not found] ` <20161210090218.4609-1-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>
2016-12-10 9:02 ` [PATCH v3 1/2] iio: imu: add support to lsm6dsx driver Lorenzo Bianconi
[not found] ` <20161210090218.4609-2-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>
2016-12-30 16:01 ` Jonathan Cameron
2016-12-10 9:02 ` [PATCH v3 2/2] Documentation: dt: iio: add st_lsm6dsx sensor device binding Lorenzo Bianconi
[not found] ` <20161210090218.4609-3-lorenzo.bianconi-qxv4g6HH51o@public.gmane.org>
2016-12-13 19:03 ` Rob Herring
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).