[PATCH v1 0/2] perf: Add xilinx APM support

[PATCH v1 0/2] perf: Add xilinx APM support

[Shubhrajyoti Datta]

The programmable AXI performance monitors (APM) collect real-time
transaction metrics at multiple points on the PS AXI interconnect
to help system software profile real-time activity.
In our platform we have it in PL and also some of the hardened
instances in PS.

Perf is a profiler tool for Linux 2.6+ based systems that abstracts
away CPU hardware differences in Linux performance measurements and
presents a simple commandline interface.

Perf is based on the perf_events interface exported by recent versions of
the Linux kernel. Therefore we register to the framework for the APM.

The IP has support for multiple slots and ranges that we are supporting
by extending the sysfs interface.

Datasheet:
https://docs.xilinx.com/v/u/en-US/pg037_axi_perf_mon
Also the Hardened instances described in
AXI Performance Monitor of ug1085.


Changes since RFC:
 - Use boolean for the values xlnx,enable-profile , xlnx,enable-trace
and xlnx,enable-event-count
- Update the file name
- use generic node name pmu
- Fix a warn

Shubhrajyoti Datta (2):
  dt-bindings: Add the binding doc for xilinx APM
  perf: Add xilinx APM support

 .../bindings/perf/xlnx,axi-perf-monitor.yaml  | 133 +++++
 drivers/perf/Kconfig                          |  11 +
 drivers/perf/Makefile                         |   1 +
 drivers/perf/xilinx_apm.c                     | 517 ++++++++++++++++++
 4 files changed, 662 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
 create mode 100644 drivers/perf/xilinx_apm.c

-- 
2.17.1

[PATCH v1 1/2] dt-bindings: Add the binding doc for xilinx APM

[Shubhrajyoti Datta]

The LogiCORE IP AXI Performance Monitor core enables AXI system
performance measurement for multiple slots (AXI4/AXI3/
AXI4-Stream/AXI4-Lite) activity. Add the devicetree binding for
xilinx APM.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
---

Changes in v1:
 - Use boolean for the values xlnx,enable-profile , xlnx,enable-trace
and xlnx,enable-event-count
- Update the file name
- use generic node name pmu

 .../bindings/perf/xlnx,axi-perf-monitor.yaml  | 133 ++++++++++++++++++
 1 file changed, 133 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml

diff --git a/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml b/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
new file mode 100644
index 000000000000..bd3a9dbc1184
--- /dev/null
+++ b/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/perf/xlnx,axi-perf-monitor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Axi Performance Monitor
+
+maintainers:
+  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
+
+properties:
+  compatible:
+    const: xlnx,axi-perf-monitor
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  xlnx,enable-profile:
+    description:
+      Enables the profile mode. Event counting in profile mode consists of a
+      fixed number of accumulators for each AXI4/AXI3/AXI4-Lite slot. All the
+      events that can be counted are detected and given to the accumulator
+      which calculates the aggregate value. There is no selection of events,
+      and in this mode, event counting is done only on AXI4/AXI3/AXI4-Lite
+      monitor slots.
+    type: boolean
+
+  xlnx,enable-trace:
+    description:
+      Enables trace mode. In trace mode, the APM provides event logging in a
+      reduced dynamic configuration. It captures the specified AXI events,
+      external events and the time stamp difference between two successive
+      events into the streaming FIFO. The selection of events to be captured
+      is set through parameter configuration. Streaming agents are not
+      supported in trace mode.
+    type: boolean
+
+  xlnx,num-monitor-slots:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of monitor slots.
+    minimum: 1
+    maximum: 8
+
+  xlnx,enable-event-count:
+    description:
+      Enable event count.
+    type: boolean
+
+  xlnx,enable-event-log:
+    type: boolean
+    description:
+      Enable event log.
+
+  xlnx,have-sampled-metric-cnt:
+    type: boolean
+    description:
+      Sampled metric counters enabled in APM.
+
+  xlnx,metric-count-width:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [32, 64]
+    description:
+      Metric Counter width.
+
+  xlnx,metric-count-scale:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [1, 2, 4, 8]
+    description:
+      Metric Counter scale factor.
+
+  xlnx,num-of-counters:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Number of counters in APM.
+
+  xlnx,metrics-sample-count-width:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [32, 64]
+    description:
+      Sampled metric counter width.
+
+  xlnx,global-count-width:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - enum: [32, 64]
+    description:
+      Global Clock counter width.
+
+  xlnx,id-filter-32bit:
+    description: APM is in 32-bit mode.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmu@44a00000 {
+        compatible = "xlnx,axi-perf-monitor";
+        interrupt-parent = <&axi_intc_1>;
+        interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>;
+        reg = <0x44a00000 0x1000>;
+        clocks = <&clkc 15>;
+        xlnx,num-monitor-slots = <4>;
+        xlnx,enable-event-count;
+        xlnx,enable-event-log;
+        xlnx,have-sampled-metric-cnt;
+        xlnx,num-of-counters = <8>;
+        xlnx,metric-count-width = <32>;
+        xlnx,metrics-sample-count-width = <32>;
+        xlnx,global-count-width = <32>;
+        xlnx,metric-count-scale = <1>;
+        xlnx,id-filter-32bit;
+    };
-- 
2.17.1

[PATCH v1 2/2] perf: Add xilinx APM support

[Shubhrajyoti Datta]

The programmable AXI performance monitors (APM) collect real-time
transaction metrics at multiple points on the AXI interconnect to
help system software profile real-time activity. In our platform
we have it in PL and also some of the hardened instances in PS.
Add Xilinx APM driver support.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
---

Changes in v1:
    - Fix a warn

 drivers/perf/Kconfig      |  11 +
 drivers/perf/Makefile     |   1 +
 drivers/perf/xilinx_apm.c | 517 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 529 insertions(+)
 create mode 100644 drivers/perf/xilinx_apm.c

diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index 341010f20b77..a9daeb750710 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -190,6 +190,17 @@ config ALIBABA_UNCORE_DRW_PMU
 	  Support for Driveway PMU events monitoring on Yitian 710 DDR
 	  Sub-system.
 
+config XILINX_APM_PMU
+	tristate "Enable PMU support for the Xilinx APM controller"
+	help
+	  Enables perf support for the Xilinx Axi Performance Monitor
+	  controller.The IP AXI Performance Monitor core measures
+	  major performance metrics for the AMBA AXI system. The Performance
+	  Monitor measures bus latency of a specific master/slave (AXI4/AXI3/AXI4-Stream/AXI4-Lite)
+	  in a system and the amount of memory traffic for specific durations.
+	  This core can also be used for real-time profiling for software applications.
+
+
 source "drivers/perf/hisilicon/Kconfig"
 
 config MARVELL_CN10K_DDR_PMU
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 050d04ee19dd..161b328f6108 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
 obj-$(CONFIG_MARVELL_CN10K_DDR_PMU) += marvell_cn10k_ddr_pmu.o
 obj-$(CONFIG_APPLE_M1_CPU_PMU) += apple_m1_cpu_pmu.o
 obj-$(CONFIG_ALIBABA_UNCORE_DRW_PMU) += alibaba_uncore_drw_pmu.o
+obj-$(CONFIG_XILINX_APM_PMU) += xilinx_apm.o
diff --git a/drivers/perf/xilinx_apm.c b/drivers/perf/xilinx_apm.c
new file mode 100644
index 000000000000..5fb1b75bcbcd
--- /dev/null
+++ b/drivers/perf/xilinx_apm.c
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Xilinx APM Performance Reporting
+ *
+ * Copyright 2022 AMD, Inc.
+ *
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/perf_event.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define XAPM_MODE_ADVANCED	1
+#define XAPM_MODE_PROFILE	2
+#define XAPM_MODE_TRACE		3
+
+#define XAPM_MSR_OFFSET			0x44
+#define XAPM_MSR_COUNTER		8
+#define XAPM_SLOTID_SHIFT		0x5
+#define XAPM_CTRL_OFFSET		0x300
+#define XAPM_MCR_OFFSET			0x100
+#define XAPM_MCR_COUNTER		16
+#define XAPM_RR				0x108
+
+#define XAPM_METRICS_CNT_EN		BIT(0)
+#define XAPM_GLOBAL_CLK_CNT_EN		BIT(16)
+#define XAPM_COUNTER_MASK		0xF
+#define XAPM_EVENT_MASK			GENMASK_ULL(11, 0)
+#define XAPM_EVENT_SHIFT		0
+#define XAPM_EVTYPE_MASK		GENMASK_ULL(15, 12)
+#define XAPM_EVTYPE_SHIFT		12
+#define XAPM_EVTYPE_APM			1
+
+#define get_event(_config)	FIELD_GET(XAPM_EVENT_MASK, _config)
+#define get_evtype(_config)	FIELD_GET(XAPM_EVTYPE_MASK, _config)
+
+#define to_xapm_perf_priv(_pmu)	container_of(_pmu, struct xapm_perf_priv, pmu)
+
+#define XAPM_EVENT_CONFIG(_event, _type)					\
+	((void *)((((_event) << XAPM_EVENT_SHIFT) & XAPM_EVENT_MASK) |	\
+		(((_type) << XAPM_EVTYPE_SHIFT) & XAPM_EVTYPE_MASK)))
+
+PMU_FORMAT_ATTR(event,		"config:0-11");
+
+/*
+ * Performance Counter Registers for APM.
+ *
+ */
+enum metric {
+	WRITE_TRANSACTION	= 0,
+	READ_TRANSACTION	= 1,
+	WRITE_BYTE		= 2,
+	READ_BYTE		= 3,
+	WRITE_BEAT		= 4,
+	READ_LATENCY		= 5,
+	WRITE_LATENCY		= 6,
+	SLV_WR_IDLE		= 7,
+	MST_RD_IDLE		= 8,
+	BVALID			= 9,
+	WLASTS			= 9,
+	RLASTS			= 10,
+	MIN_WR_LATENCY		= 11,
+	MAX_WR_LATENCY		= 12,
+	MIN_RD_LATENCY		= 13,
+	MAX_RD_LATENCY		= 14,
+	MAX_METRIC		= 15
+};
+
+/**
+ * struct xapm_perf_priv - priv data structure for xapm perf driver
+ *
+ * @dev: parent device.
+ * @ioaddr: mapped base address of DDR region.
+ * @pmu: pmu data structure for xapm perf counters.
+ * @cpu: active CPU to which the PMU is bound for accesses.
+ * @mode: Mode of APM eg advanced/profile/trace .
+ * @counter: current counter.
+ * @slot: current slot to be read.
+ * @range: Range to be allowed.
+ * @node: handle to the xapm node.
+ * @maxslots: Maximum number of slots.
+ * @cpuhp_state: state for CPU hotplug notification.
+ * @clk: clock handle.
+ */
+struct xapm_perf_priv {
+	struct device *dev;
+	void __iomem *ioaddr;
+	struct pmu pmu;
+	unsigned int cpu;
+	u32 mode;
+	u32 counter;
+	u32 slot;
+	u32 maxslots;
+	u32 range;
+	struct hlist_node node;
+	enum cpuhp_state cpuhp_state;
+	struct clk *clk;
+};
+
+static ssize_t cpumask_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct pmu *pmu = dev_get_drvdata(dev);
+	struct xapm_perf_priv *priv;
+
+	priv = to_xapm_perf_priv(pmu);
+
+	return cpumap_print_to_pagebuf(true, buf, cpumask_of(priv->cpu));
+}
+static DEVICE_ATTR_RO(cpumask);
+
+static ssize_t slot_store(struct device *dev,
+			  struct device_attribute *attr,
+			  const char *buf, size_t size)
+{
+	int ret;
+	struct pmu *pmu = dev_get_drvdata(dev);
+	struct xapm_perf_priv *priv;
+
+	priv = to_xapm_perf_priv(pmu);
+	ret = kstrtou32(buf, 0, &priv->slot);
+	if (ret < 0)
+		return ret;
+
+	if (priv->slot > priv->maxslots)
+		return -EINVAL;
+
+	return size;
+}
+static DEVICE_ATTR_WO(slot);
+
+static ssize_t range_store(struct device *dev,
+			   struct device_attribute *attr,
+			   const char *buf, size_t size)
+{
+	int ret;
+	struct pmu *pmu = dev_get_drvdata(dev);
+	struct xapm_perf_priv *priv;
+
+	priv = to_xapm_perf_priv(pmu);
+	ret = kstrtou32(buf, 0, &priv->range);
+	if (ret < 0)
+		return ret;
+
+	writel(priv->range, priv->ioaddr + XAPM_RR);
+
+	return size;
+}
+static DEVICE_ATTR_WO(range);
+
+static struct attribute *xapm_perf_cpumask_attrs[] = {
+	&dev_attr_cpumask.attr,
+	&dev_attr_slot.attr,
+	&dev_attr_range.attr,
+	NULL,
+};
+
+static struct attribute_group xapm_perf_cpumask_group = {
+	.attrs = xapm_perf_cpumask_attrs,
+};
+
+static struct attribute *xapm_perf_format_attrs[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static struct attribute_group xapm_perf_format_group = {
+	.name = "format",
+	.attrs = xapm_perf_format_attrs,
+};
+
+static ssize_t xapm_perf_event_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct dev_ext_attribute *eattr;
+	unsigned long config;
+	char *ptr = buf;
+
+	eattr = container_of(attr, struct dev_ext_attribute, attr);
+	config = (unsigned long)eattr->var;
+
+	ptr += sprintf(ptr, "event=0x%02x\n", (unsigned int)get_event(config));
+
+	return (ssize_t)(ptr - buf);
+}
+
+#define XAPM_EVENT_ATTR(_name) \
+	__ATTR(_name, 0444, xapm_perf_event_show, NULL)
+
+#define XAPM_EVENT(_name, _event)					\
+static struct dev_ext_attribute xapm_perf_event_##_name = {		\
+	.attr = XAPM_EVENT_ATTR(xapm_##_name),				\
+	.var = XAPM_EVENT_CONFIG(_event, XAPM_EVTYPE_APM),		\
+}
+
+XAPM_EVENT(write_cnt_0,   WRITE_TRANSACTION | (0 << 4));
+XAPM_EVENT(read_cnt_0,  READ_TRANSACTION | (0 << 4));
+XAPM_EVENT(write_cnt_1,   WRITE_TRANSACTION | (1 << 4));
+XAPM_EVENT(read_cnt_1,  READ_TRANSACTION | (1 << 4));
+XAPM_EVENT(write_cnt_2,   WRITE_TRANSACTION | (2 << 4));
+XAPM_EVENT(read_cnt_2,  READ_TRANSACTION | (2 << 4));
+XAPM_EVENT(write_cnt_3,   WRITE_TRANSACTION | (3 << 4));
+XAPM_EVENT(read_cnt_3,  READ_TRANSACTION | (3 << 4));
+XAPM_EVENT(write_cnt_4,   WRITE_TRANSACTION | (4 << 4));
+XAPM_EVENT(read_cnt_4,  READ_TRANSACTION | (4 << 4));
+XAPM_EVENT(write_cnt_5,   WRITE_TRANSACTION | (5 << 4));
+XAPM_EVENT(read_cnt_5,  READ_TRANSACTION | (5 << 4));
+XAPM_EVENT(write_cnt_6,   WRITE_TRANSACTION | (6 << 4));
+XAPM_EVENT(read_cnt_6,  READ_TRANSACTION | (6 << 4));
+XAPM_EVENT(write_cnt_7,   WRITE_TRANSACTION | (7 << 4));
+XAPM_EVENT(read_cnt_7,  READ_TRANSACTION | (7 << 4));
+
+static struct attribute *xapm_perf_events_attrs_all[17] = {
+	&xapm_perf_event_read_cnt_0.attr.attr,
+	&xapm_perf_event_write_cnt_0.attr.attr,
+	&xapm_perf_event_read_cnt_1.attr.attr,
+	&xapm_perf_event_write_cnt_1.attr.attr,
+	&xapm_perf_event_read_cnt_2.attr.attr,
+	&xapm_perf_event_write_cnt_2.attr.attr,
+	&xapm_perf_event_read_cnt_3.attr.attr,
+	&xapm_perf_event_write_cnt_3.attr.attr,
+	&xapm_perf_event_read_cnt_4.attr.attr,
+	&xapm_perf_event_write_cnt_4.attr.attr,
+	&xapm_perf_event_read_cnt_5.attr.attr,
+	&xapm_perf_event_write_cnt_5.attr.attr,
+	&xapm_perf_event_read_cnt_6.attr.attr,
+	&xapm_perf_event_write_cnt_6.attr.attr,
+	&xapm_perf_event_read_cnt_7.attr.attr,
+	&xapm_perf_event_write_cnt_7.attr.attr,
+	NULL,
+};
+
+static u64 xapm_read_event_counter(struct xapm_perf_priv *priv, u32 event)
+{
+	void __iomem *base = priv->ioaddr;
+	u64 counter;
+	u64 reg;
+
+	priv->counter = event >> 4;
+
+	reg = readl(base + XAPM_MSR_OFFSET);
+	reg =	reg & ~(XAPM_COUNTER_MASK  << priv->counter * XAPM_MSR_COUNTER);
+	reg =	reg | (event) << priv->counter * 8;
+	reg =	reg | (priv->slot) << (priv->counter * 8 + XAPM_SLOTID_SHIFT);
+	writel(reg, base + XAPM_MSR_OFFSET);
+
+	counter = readl(base + XAPM_MCR_OFFSET + (priv->counter * XAPM_MCR_COUNTER));
+
+	return counter;
+}
+
+static int xapm_perf_event_init(struct perf_event *event)
+{
+	struct xapm_perf_priv *priv = to_xapm_perf_priv(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	void __iomem *base = priv->ioaddr;
+	u32 reg;
+
+	hwc->event_base = get_evtype(event->attr.config);
+	hwc->idx = (int)get_event(event->attr.config);
+
+	reg = readl(base + XAPM_CTRL_OFFSET);
+	reg |= XAPM_GLOBAL_CLK_CNT_EN;
+	reg |= XAPM_METRICS_CNT_EN;
+	writel(reg, base + XAPM_CTRL_OFFSET);
+
+	return 0;
+}
+
+static void xapm_perf_event_update(struct perf_event *event)
+{
+	struct xapm_perf_priv *priv = to_xapm_perf_priv(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u64 now, prev, delta;
+
+	now = xapm_read_event_counter(priv, (u32)hwc->idx);
+	prev = local64_read(&hwc->prev_count);
+	delta = now - prev;
+
+	local64_add(delta, &event->count);
+}
+
+static void xapm_perf_event_start(struct perf_event *event, int flags)
+{
+	struct xapm_perf_priv *priv = to_xapm_perf_priv(event->pmu);
+	struct hw_perf_event *hwc = &event->hw;
+	u64 count;
+
+	count = xapm_read_event_counter(priv, (u32)hwc->idx);
+	local64_set(&hwc->prev_count, count);
+}
+
+static void xapm_perf_event_stop(struct perf_event *event, int flags)
+{
+	xapm_perf_event_update(event);
+}
+
+static int xapm_perf_event_add(struct perf_event *event, int flags)
+{
+	if (flags & PERF_EF_START)
+		xapm_perf_event_start(event, flags);
+
+	return 0;
+}
+
+static void xapm_perf_event_del(struct perf_event *event, int flags)
+{
+	xapm_perf_event_stop(event, PERF_EF_UPDATE);
+}
+
+static void xapm_perf_event_read(struct perf_event *event)
+{
+	xapm_perf_event_update(event);
+}
+
+static int xapm_perf_offline_cpu(unsigned int cpu, struct hlist_node *node)
+{
+	struct xapm_perf_priv *priv;
+	int target;
+
+	priv = hlist_entry_safe(node, struct xapm_perf_priv, node);
+
+	if (cpu != priv->cpu)
+		return 0;
+
+	target = cpumask_any_but(cpu_online_mask, cpu);
+	if (target >= nr_cpu_ids)
+		return 0;
+
+	priv->cpu = target;
+	return 0;
+}
+
+static int xapm_perf_probe(struct platform_device *pdev)
+{
+	static struct attribute_group xapm_perf_events_group;
+	static struct attribute *xapm_perf_events_attrs[17];
+	struct xapm_perf_priv *priv;
+	void __iomem *baseaddr;
+	struct resource *res;
+	u32 numcounters;
+	struct pmu *pmu;
+	u32 mode = 0;
+	char *name;
+	int ret, i;
+	static const struct attribute_group *xapm_perf_groups[] = {
+		&xapm_perf_format_group,
+		&xapm_perf_cpumask_group,
+		&xapm_perf_events_group,
+		NULL,
+	};
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, priv);
+	baseaddr = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(baseaddr))
+		return PTR_ERR(baseaddr);
+
+	priv->dev = &pdev->dev;
+	priv->ioaddr = baseaddr;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "xlnx,num-of-counters",
+				   &numcounters);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "no property xlnx,num-of-counters");
+		return ret;
+	}
+
+	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		if (PTR_ERR(priv->clk) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "axi clock error\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	priv->cpu = raw_smp_processor_id();
+
+	ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN,
+				      "perf/xapm/xapm:online",
+				      NULL, xapm_perf_offline_cpu);
+	if (ret < 0)
+		return ret;
+
+	priv->cpuhp_state = ret;
+	priv->mode = XAPM_MODE_ADVANCED;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "xlnx,enable-profile", &mode);
+	if (ret < 0)
+		dev_info(&pdev->dev, "no property xlnx,enable-profile\n");
+	else if (mode)
+		priv->mode = XAPM_MODE_PROFILE;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "xlnx,enable-trace", &mode);
+	if (ret < 0)
+		dev_info(&pdev->dev, "no property xlnx,enable-trace\n");
+	else if (mode)
+		priv->mode = XAPM_MODE_TRACE;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		goto cpuhp_instance_err;
+	}
+	/* Register the pmu instance for cpu hotplug */
+	ret = cpuhp_state_add_instance_nocalls(priv->cpuhp_state, &priv->node);
+	if (ret)
+		goto cpuhp_instance_err;
+
+	for (i = 0; i < numcounters * 2; i++)
+		xapm_perf_events_attrs[i] = xapm_perf_events_attrs_all[i];
+	xapm_perf_events_attrs[i] = NULL;
+
+	xapm_perf_events_group.name = "events";
+	xapm_perf_events_group.attrs = xapm_perf_events_attrs;
+
+	pmu = &priv->pmu;
+
+	pmu->task_ctx_nr =	perf_invalid_context;
+	pmu->attr_groups =	xapm_perf_groups;
+	pmu->event_init =	xapm_perf_event_init;
+	pmu->add =		xapm_perf_event_add;
+	pmu->del =		xapm_perf_event_del;
+	pmu->start =		xapm_perf_event_start;
+	pmu->stop =		xapm_perf_event_stop;
+	pmu->read =		xapm_perf_event_read;
+	pmu->capabilities =	PERF_PMU_CAP_NO_INTERRUPT |
+				PERF_PMU_CAP_NO_EXCLUDE;
+
+	ret = of_property_read_u32(pdev->dev.of_node, "xlnx,num-monitor-slots",
+				   &priv->maxslots);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "no property xlnx,num-monitor-slots");
+		return ret;
+	}
+
+	name = devm_kasprintf(priv->dev, GFP_KERNEL, "xapm%llx_counter",
+			      (u64)res->start);
+	ret = perf_pmu_register(pmu, name, -1);
+	if (ret)
+		goto pmu_register_err;
+
+	pm_runtime_get_noresume(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+pmu_register_err:
+	cpuhp_state_remove_instance_nocalls(priv->cpuhp_state, &priv->node);
+cpuhp_instance_err:
+	cpuhp_remove_multi_state(priv->cpuhp_state);
+	return ret;
+}
+
+static int xapm_perf_remove(struct platform_device *pdev)
+{
+	struct xapm_perf_priv *priv = platform_get_drvdata(pdev);
+
+	perf_pmu_unregister(&priv->pmu);
+	cpuhp_state_remove_instance_nocalls(priv->cpuhp_state, &priv->node);
+	clk_disable_unprepare(priv->clk);
+	pm_runtime_disable(&pdev->dev);
+	pm_runtime_set_suspended(&pdev->dev);
+	return 0;
+}
+
+static int __maybe_unused xapm_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct xapm_perf_priv *priv = platform_get_drvdata(pdev);
+
+	clk_disable_unprepare(priv->clk);
+	return 0;
+};
+
+static int __maybe_unused xapm_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct xapm_perf_priv *priv = platform_get_drvdata(pdev);
+	int ret;
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to enable clock.\n");
+		return ret;
+	}
+	return 0;
+};
+
+static const struct dev_pm_ops xapm_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(xapm_runtime_suspend, xapm_runtime_resume)
+	SET_RUNTIME_PM_OPS(xapm_runtime_suspend,
+			   xapm_runtime_resume, NULL)
+};
+
+static const struct of_device_id xapm_perf_match[] = {
+	{ .compatible = "xlnx,axi-perf-monitor", },
+	{},
+};
+
+static struct platform_driver xlnx_apm_driver = {
+	.driver = {
+		.name = "xlnx_apm_perf",
+		.of_match_table = xapm_perf_match,
+		.suppress_bind_attrs = true,
+		.pm = &xapm_dev_pm_ops,
+	},
+	.probe = xapm_perf_probe,
+	.remove = xapm_perf_remove,
+};
+builtin_platform_driver(xlnx_apm_driver);
-- 
2.17.1

Re: [PATCH v1 1/2] dt-bindings: Add the binding doc for xilinx APM

[Krzysztof Kozlowski]

On 19/10/2022 05:17, Shubhrajyoti Datta wrote:
> The LogiCORE IP AXI Performance Monitor core enables AXI system
> performance measurement for multiple slots (AXI4/AXI3/
> AXI4-Stream/AXI4-Lite) activity. Add the devicetree binding for
> xilinx APM.

Subject:
Drop redundant "bindings" and add missing prefix, so:

dt-bindings: perf: Add Xilinx APM

> 
> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
> ---
> 
> Changes in v1:

This should be then a v2.

>  - Use boolean for the values xlnx,enable-profile , xlnx,enable-trace
> and xlnx,enable-event-count
> - Update the file name
> - use generic node name pmu
> 
>  .../bindings/perf/xlnx,axi-perf-monitor.yaml  | 133 ++++++++++++++++++
>  1 file changed, 133 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
> 
> diff --git a/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml b/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
> new file mode 100644
> index 000000000000..bd3a9dbc1184
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
> @@ -0,0 +1,133 @@
> +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/perf/xlnx,axi-perf-monitor.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx Axi Performance Monitor
> +
> +maintainers:
> +  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
> +
> +properties:
> +  compatible:
> +    const: xlnx,axi-perf-monitor
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  xlnx,enable-profile:
> +    description:
> +      Enables the profile mode. Event counting in profile mode consists of a
> +      fixed number of accumulators for each AXI4/AXI3/AXI4-Lite slot. All the
> +      events that can be counted are detected and given to the accumulator
> +      which calculates the aggregate value. There is no selection of events,
> +      and in this mode, event counting is done only on AXI4/AXI3/AXI4-Lite
> +      monitor slots.
> +    type: boolean
> +
> +  xlnx,enable-trace:
> +    description:
> +      Enables trace mode. In trace mode, the APM provides event logging in a
> +      reduced dynamic configuration. It captures the specified AXI events,
> +      external events and the time stamp difference between two successive
> +      events into the streaming FIFO. The selection of events to be captured
> +      is set through parameter configuration. Streaming agents are not
> +      supported in trace mode.
> +    type: boolean

Both enable profile and enable trace do not look like hardware
properties, but rather runtime features. In what use case this enabling
trace or profile should be a property of a hardware?

> +
> +  xlnx,num-monitor-slots:
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Number of monitor slots.
> +    minimum: 1
> +    maximum: 8
> +
> +  xlnx,enable-event-count:
> +    description:
> +      Enable event count.

The same

> +    type: boolean
> +
> +  xlnx,enable-event-log:
> +    type: boolean
> +    description:
> +      Enable event log.

The same

> +
> +  xlnx,have-sampled-metric-cnt:
> +    type: boolean
> +    description:
> +      Sampled metric counters enabled in APM.
> +
> +  xlnx,metric-count-width:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [32, 64]

This is a friendly reminder during the review process.

It seems my previous comments were not fully addressed. Maybe my
feedback got lost between the quotes, maybe you just forgot to apply it.
Please go back to the previous discussion and either implement all
requested changes or keep discussing them.

Thank you.

Best regards,
Krzysztof

RE: [PATCH v1 1/2] dt-bindings: Add the binding doc for xilinx APM

[Datta, Shubhrajyoti]

[AMD Official Use Only - General]



> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Sent: Wednesday, October 19, 2022 5:53 PM
> To: Datta, Shubhrajyoti <shubhrajyoti.datta@amd.com>; linux-arm-
> kernel@lists.infradead.org
> Cc: git (AMD-Xilinx) <git@amd.com>; devicetree@vger.kernel.org;
> will@kernel.org; mark.rutland@arm.com; robh+dt@kernel.org;
> krzysztof.kozlowski+dt@linaro.org; michal.simek@xilinx.com
> Subject: Re: [PATCH v1 1/2] dt-bindings: Add the binding doc for xilinx APM
> 
> Caution: This message originated from an External Source. Use proper
> caution when opening attachments, clicking links, or responding.
> 
> 
> On 19/10/2022 05:17, Shubhrajyoti Datta wrote:
> > The LogiCORE IP AXI Performance Monitor core enables AXI system
> > performance measurement for multiple slots (AXI4/AXI3/
> > AXI4-Stream/AXI4-Lite) activity. Add the devicetree binding for xilinx
> > APM.
> 
> Subject:
> Drop redundant "bindings" and add missing prefix, so:
> 
> dt-bindings: perf: Add Xilinx APM
Will update.
> 
> >
> > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
> > ---
> >
> > Changes in v1:
> 
> This should be then a v2.
Earlier one was an RFC so I had made it v1.

> 
> >  - Use boolean for the values xlnx,enable-profile , xlnx,enable-trace
> > and xlnx,enable-event-count
> > - Update the file name
> > - use generic node name pmu
> >
> >  .../bindings/perf/xlnx,axi-perf-monitor.yaml  | 133
> > ++++++++++++++++++
> >  1 file changed, 133 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
> > b/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
> > new file mode 100644
> > index 000000000000..bd3a9dbc1184
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yam
> > +++ l
> > @@ -0,0 +1,133 @@
> > +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause %YAML 1.2
> > +---
> > +$id:
> >
> +https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fschemas%2Fperf%2Fxlnx%2Caxi-perf-
> monitor.yaml%23&amp;dat
> >
> +a=05%7C01%7Cshubhrajyoti.datta%40amd.com%7C15905dd06b164f7de3d
> 508dab1
> >
> +ccb630%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C638017790
> 04335677
> >
> +2%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMz
> IiLCJBTiI
> >
> +6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=zOrK%2FG
> dlP87S%2FTp
> > +XqdnrNSk0PyJgWRJYU4EZHgJtqMA%3D&amp;reserved=0
> > +$schema:
> >
> +https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
> > +cetree.org%2Fmeta-
> schemas%2Fcore.yaml%23&amp;data=05%7C01%7Cshubhrajy
> >
> +oti.datta%40amd.com%7C15905dd06b164f7de3d508dab1ccb630%7C3dd89
> 61fe488
> >
> +4e608e11a82d994e183d%7C0%7C0%7C638017790043356772%7CUnknown
> %7CTWFpbGZ
> >
> +sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6
> Mn0%
> >
> +3D%7C3000%7C%7C%7C&amp;sdata=Vl1TpXVHyuS6YmnSP%2BKPOO8D5ap
> 0y9jtV52Q9s
> > +%2F1pvQ%3D&amp;reserved=0
> > +
> > +title: Xilinx Axi Performance Monitor
> > +
> > +maintainers:
> > +  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
> > +
> > +properties:
> > +  compatible:
> > +    const: xlnx,axi-perf-monitor
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  xlnx,enable-profile:
> > +    description:
> > +      Enables the profile mode. Event counting in profile mode consists of a
> > +      fixed number of accumulators for each AXI4/AXI3/AXI4-Lite slot. All the
> > +      events that can be counted are detected and given to the accumulator
> > +      which calculates the aggregate value. There is no selection of events,
> > +      and in this mode, event counting is done only on AXI4/AXI3/AXI4-Lite
> > +      monitor slots.
> > +    type: boolean
> > +
> > +  xlnx,enable-trace:
> > +    description:
> > +      Enables trace mode. In trace mode, the APM provides event logging in
> a
> > +      reduced dynamic configuration. It captures the specified AXI events,
> > +      external events and the time stamp difference between two successive
> > +      events into the streaming FIFO. The selection of events to be captured
> > +      is set through parameter configuration. Streaming agents are not
> > +      supported in trace mode.
> > +    type: boolean
> 
> Both enable profile and enable trace do not look like hardware properties,
> but rather runtime features. In what use case this enabling trace or profile
> should be a property of a hardware?
> 
The hardware being on FPGA is configurable what capabilities it will have.
Once chosen to have say the trace it will have tracing capabilities else it will not have.

> > +
> > +  xlnx,num-monitor-slots:
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    description:
> > +      Number of monitor slots.
> > +    minimum: 1
> > +    maximum: 8
> > +
> > +  xlnx,enable-event-count:
> > +    description:
> > +      Enable event count.
> 
> The same
> 
> > +    type: boolean
> > +
> > +  xlnx,enable-event-log:
> > +    type: boolean
> > +    description:
> > +      Enable event log.
> 
> The same
Similarly whether event logging capabilities will be there in the hardware is configurable.
If enabled then it have event logging capabilities.

> 
> > +
> > +  xlnx,have-sampled-metric-cnt:
> > +    type: boolean
> > +    description:
> > +      Sampled metric counters enabled in APM.
> > +
> > +  xlnx,metric-count-width:
> > +    allOf:
> > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > +      - enum: [32, 64]
> 
> This is a friendly reminder during the review process.
> 
> It seems my previous comments were not fully addressed. Maybe my
> feedback got lost between the quotes, maybe you just forgot to apply it.
> Please go back to the previous discussion and either implement all requested
> changes or keep discussing them.
> 
I tried to address the comments in 
https://lore.kernel.org/linux-arm-kernel/BY5PR12MB4902474D74155E57BF5D7B9C814F9@BY5PR12MB4902.namprd12.prod.outlook.com/

I thought I have implemented all the comments.  Let me know if I missed something.

Thanks and Regards,
Shubhrajyoti
> Thank you.
> 
> Best regards,
> Krzysztof

Re: [PATCH v1 1/2] dt-bindings: Add the binding doc for xilinx APM

[Krzysztof Kozlowski]

On 20/10/2022 05:37, Datta, Shubhrajyoti wrote:
> [AMD Official Use Only - General]
> 
> 
> 
>> -----Original Message-----
>> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>> Sent: Wednesday, October 19, 2022 5:53 PM
>> To: Datta, Shubhrajyoti <shubhrajyoti.datta@amd.com>; linux-arm-
>> kernel@lists.infradead.org
>> Cc: git (AMD-Xilinx) <git@amd.com>; devicetree@vger.kernel.org;
>> will@kernel.org; mark.rutland@arm.com; robh+dt@kernel.org;
>> krzysztof.kozlowski+dt@linaro.org; michal.simek@xilinx.com
>> Subject: Re: [PATCH v1 1/2] dt-bindings: Add the binding doc for xilinx APM
>>
>> Caution: This message originated from an External Source. Use proper
>> caution when opening attachments, clicking links, or responding.
>>
>>
>> On 19/10/2022 05:17, Shubhrajyoti Datta wrote:
>>> The LogiCORE IP AXI Performance Monitor core enables AXI system
>>> performance measurement for multiple slots (AXI4/AXI3/
>>> AXI4-Stream/AXI4-Lite) activity. Add the devicetree binding for xilinx
>>> APM.
>>
>> Subject:
>> Drop redundant "bindings" and add missing prefix, so:
>>
>> dt-bindings: perf: Add Xilinx APM
> Will update.
>>
>>>
>>> Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
>>> ---
>>>
>>> Changes in v1:
>>
>> This should be then a v2.
> Earlier one was an RFC so I had made it v1.

RFC is also a version. v1 is the first submission we see, so if it was a
RFC, it was a v1.

> 
>>
>>>  - Use boolean for the values xlnx,enable-profile , xlnx,enable-trace
>>> and xlnx,enable-event-count
>>> - Update the file name
>>> - use generic node name pmu
>>>
>>>  .../bindings/perf/xlnx,axi-perf-monitor.yaml  | 133
>>> ++++++++++++++++++
>>>  1 file changed, 133 insertions(+)
>>>  create mode 100644
>>> Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
>>> b/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yaml
>>> new file mode 100644
>>> index 000000000000..bd3a9dbc1184
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/perf/xlnx,axi-perf-monitor.yam
>>> +++ l
>>> @@ -0,0 +1,133 @@
>>> +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause %YAML 1.2
>>> +---
>>> +$id:
>>>
>> +https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
>>> +cetree.org%2Fschemas%2Fperf%2Fxlnx%2Caxi-perf-
>> monitor.yaml%23&amp;dat
>>>
>> +a=05%7C01%7Cshubhrajyoti.datta%40amd.com%7C15905dd06b164f7de3d
>> 508dab1
>>>
>> +ccb630%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C638017790
>> 04335677
>>>
>> +2%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMz
>> IiLCJBTiI
>>>
>> +6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=zOrK%2FG
>> dlP87S%2FTp
>>> +XqdnrNSk0PyJgWRJYU4EZHgJtqMA%3D&amp;reserved=0
>>> +$schema:
>>>
>> +https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fdevi
>>> +cetree.org%2Fmeta-
>> schemas%2Fcore.yaml%23&amp;data=05%7C01%7Cshubhrajy
>>>
>> +oti.datta%40amd.com%7C15905dd06b164f7de3d508dab1ccb630%7C3dd89
>> 61fe488
>>>
>> +4e608e11a82d994e183d%7C0%7C0%7C638017790043356772%7CUnknown
>> %7CTWFpbGZ
>>>
>> +sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6
>> Mn0%
>>>
>> +3D%7C3000%7C%7C%7C&amp;sdata=Vl1TpXVHyuS6YmnSP%2BKPOO8D5ap
>> 0y9jtV52Q9s
>>> +%2F1pvQ%3D&amp;reserved=0
>>> +
>>> +title: Xilinx Axi Performance Monitor
>>> +
>>> +maintainers:
>>> +  - Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
>>> +
>>> +properties:
>>> +  compatible:
>>> +    const: xlnx,axi-perf-monitor
>>> +
>>> +  reg:
>>> +    maxItems: 1
>>> +
>>> +  clocks:
>>> +    maxItems: 1
>>> +
>>> +  interrupts:
>>> +    maxItems: 1
>>> +
>>> +  xlnx,enable-profile:
>>> +    description:
>>> +      Enables the profile mode. Event counting in profile mode consists of a
>>> +      fixed number of accumulators for each AXI4/AXI3/AXI4-Lite slot. All the
>>> +      events that can be counted are detected and given to the accumulator
>>> +      which calculates the aggregate value. There is no selection of events,
>>> +      and in this mode, event counting is done only on AXI4/AXI3/AXI4-Lite
>>> +      monitor slots.
>>> +    type: boolean
>>> +
>>> +  xlnx,enable-trace:
>>> +    description:
>>> +      Enables trace mode. In trace mode, the APM provides event logging in
>> a
>>> +      reduced dynamic configuration. It captures the specified AXI events,
>>> +      external events and the time stamp difference between two successive
>>> +      events into the streaming FIFO. The selection of events to be captured
>>> +      is set through parameter configuration. Streaming agents are not
>>> +      supported in trace mode.
>>> +    type: boolean
>>
>> Both enable profile and enable trace do not look like hardware properties,
>> but rather runtime features. In what use case this enabling trace or profile
>> should be a property of a hardware?
>>
> The hardware being on FPGA is configurable what capabilities it will have.
> Once chosen to have say the trace it will have tracing capabilities else it will not have.

Sorry, still do not understand. What does it mean "hardware on FPGA is
configurable" in context of property meaning - "enables XXXX"? So you
here configure hardware attached to FPGA to have some piece or not? You
need to answer more.

Have in mind that I read your description how it is written, so
including language grammar. You specifically said "Enables trace mode"
which means for the same device/hardware we can enable or disable trace
mode.

If the meaning is different, please use correct grammar for it.


> 
>>> +
>>> +  xlnx,num-monitor-slots:
>>> +    $ref: /schemas/types.yaml#/definitions/uint32
>>> +    description:
>>> +      Number of monitor slots.
>>> +    minimum: 1
>>> +    maximum: 8
>>> +
>>> +  xlnx,enable-event-count:
>>> +    description:
>>> +      Enable event count.
>>
>> The same
>>
>>> +    type: boolean
>>> +
>>> +  xlnx,enable-event-log:
>>> +    type: boolean
>>> +    description:
>>> +      Enable event log.
>>
>> The same
> Similarly whether event logging capabilities will be there in the hardware is configurable.
> If enabled then it have event logging capabilities.
> 
>>
>>> +
>>> +  xlnx,have-sampled-metric-cnt:
>>> +    type: boolean
>>> +    description:
>>> +      Sampled metric counters enabled in APM.
>>> +
>>> +  xlnx,metric-count-width:
>>> +    allOf:
>>> +      - $ref: /schemas/types.yaml#/definitions/uint32
>>> +      - enum: [32, 64]
>>
>> This is a friendly reminder during the review process.
>>
>> It seems my previous comments were not fully addressed. Maybe my
>> feedback got lost between the quotes, maybe you just forgot to apply it.
>> Please go back to the previous discussion and either implement all requested
>> changes or keep discussing them.
>>
> I tried to address the comments in 
> https://lore.kernel.org/linux-arm-kernel/BY5PR12MB4902474D74155E57BF5D7B9C814F9@BY5PR12MB4902.namprd12.prod.outlook.com/
> 
> I thought I have implemented all the comments.  Let me know if I missed something.

Yes, you miss several of them. I commented here under first change with
ignored comment.

Best regards,
Krzysztof

Re: [PATCH v1 2/2] perf: Add xilinx APM support

[kernel test robot]

[-- Attachment #1: Type: text/plain, Size: 2046 bytes --]

Hi Shubhrajyoti,

I love your patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on linus/master v6.1-rc2 next-20221028]
[cannot apply to soc/for-next]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Shubhrajyoti-Datta/perf-Add-xilinx-APM-support/20221019-181536
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20221019091713.9285-3-shubhrajyoti.datta%40amd.com
patch subject: [PATCH v1 2/2] perf: Add xilinx APM support
config: s390-randconfig-p002-20221028
compiler: s390-linux-gcc (GCC) 12.1.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/intel-lab-lkp/linux/commit/bdc85f52886b1c1410d4b4e24f1faf3908431144
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Shubhrajyoti-Datta/perf-Add-xilinx-APM-support/20221019-181536
        git checkout bdc85f52886b1c1410d4b4e24f1faf3908431144
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-12.1.0 make.cross W=1 O=build_dir ARCH=s390 SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>, old ones prefixed by <<):

ERROR: modpost: missing MODULE_LICENSE() in drivers/perf/xilinx_apm.o
ERROR: modpost: "devm_platform_ioremap_resource" [drivers/char/xillybus/xillybus_of.ko] undefined!
>> ERROR: modpost: "devm_platform_get_and_ioremap_resource" [drivers/perf/xilinx_apm.ko] undefined!

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 76870 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/s390 6.1.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="s390-linux-gcc (GCC) 12.1.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=120100
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23800
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23800
CONFIG_LLD_VERSION=0
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
CONFIG_HAVE_KERNEL_UNCOMPRESSED=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_KERNEL_LZ4=y
# CONFIG_KERNEL_ZSTD is not set
# CONFIG_KERNEL_UNCOMPRESSED is not set
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_INJECTION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_SIM=y
CONFIG_SPARSE_IRQ=y
CONFIG_GENERIC_IRQ_DEBUGFS=y
# end of IRQ subsystem

CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_TIME_KUNIT_TEST=m
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
CONFIG_BPF_JIT=y
CONFIG_BPF_JIT_ALWAYS_ON=y
CONFIG_BPF_JIT_DEFAULT_ON=y
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
# CONFIG_SCHED_CORE is not set

#
# CPU/Task time and stats accounting
#
CONFIG_VIRT_CPU_ACCOUNTING=y
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
CONFIG_PSI=y
CONFIG_PSI_DEFAULT_DISABLED=y
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
CONFIG_RCU_EXPERT=y
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_FORCE_TASKS_RCU=y
CONFIG_TASKS_RCU=y
CONFIG_FORCE_TASKS_RUDE_RCU=y
CONFIG_TASKS_RUDE_RCU=y
# CONFIG_FORCE_TASKS_TRACE_RCU is not set
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y
CONFIG_TASKS_TRACE_RCU_READ_MB=y
# end of RCU Subsystem

CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set

#
# Scheduler features
#
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CC_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
# CONFIG_BLK_CGROUP is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_CGROUP_PIDS=y
CONFIG_CGROUP_RDMA=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CPUSETS is not set
CONFIG_CGROUP_DEVICE=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_TIME_NS is not set
CONFIG_USER_NS=y
CONFIG_PID_NS=y
# CONFIG_NET_NS is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_RD_GZIP is not set
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_RD_ZSTD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_RSEQ=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
CONFIG_PROFILING=y
# end of General setup

CONFIG_MMU=y
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_AUDIT_ARCH=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_S390=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PGTABLE_LEVELS=5
CONFIG_HAVE_LIVEPATCH=y

#
# Processor type and features
#
CONFIG_HAVE_MARCH_Z10_FEATURES=y
CONFIG_HAVE_MARCH_Z196_FEATURES=y
# CONFIG_MARCH_Z10 is not set
CONFIG_MARCH_Z196=y
# CONFIG_MARCH_ZEC12 is not set
# CONFIG_MARCH_Z13 is not set
# CONFIG_MARCH_Z14 is not set
# CONFIG_MARCH_Z15 is not set
CONFIG_MARCH_Z196_TUNE=y
CONFIG_TUNE_DEFAULT=y
# CONFIG_TUNE_Z10 is not set
# CONFIG_TUNE_Z196 is not set
# CONFIG_TUNE_ZEC12 is not set
# CONFIG_TUNE_Z13 is not set
# CONFIG_TUNE_Z14 is not set
# CONFIG_TUNE_Z15 is not set
# CONFIG_TUNE_Z16 is not set
CONFIG_64BIT=y
CONFIG_COMMAND_LINE_SIZE=4096
CONFIG_COMPAT=y
CONFIG_SMP=y
CONFIG_NR_CPUS=64
CONFIG_HOTPLUG_CPU=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=1
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_BOOK=y
CONFIG_SCHED_DRAWER=y
CONFIG_SCHED_TOPOLOGY=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_KEXEC_FILE=y
CONFIG_ARCH_HAS_KEXEC_PURGATORY=y
CONFIG_KEXEC_SIG=y
# CONFIG_KERNEL_NOBP is not set
CONFIG_EXPOLINE=y
CONFIG_EXPOLINE_EXTERN=y
CONFIG_EXPOLINE_OFF=y
# CONFIG_EXPOLINE_AUTO is not set
# CONFIG_EXPOLINE_FULL is not set
# CONFIG_RELOCATABLE is not set
# end of Processor type and features

#
# Memory setup
#
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_MAX_PHYSMEM_BITS=46
CONFIG_CHECK_STACK=y
CONFIG_STACK_GUARD=256
# end of Memory setup

#
# I/O subsystem
#
CONFIG_QDIO=m
# CONFIG_CHSC_SCH is not set
CONFIG_SCM_BUS=y
# CONFIG_EADM_SCH is not set
# end of I/O subsystem

#
# Dump support
#
# CONFIG_CRASH_DUMP is not set
# end of Dump support

CONFIG_CCW=y

#
# Virtualization
#
CONFIG_PROTECTED_VIRTUALIZATION_GUEST=y
# CONFIG_PFAULT is not set
CONFIG_CMM=y
# CONFIG_APPLDATA_BASE is not set
CONFIG_S390_HYPFS_FS=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
CONFIG_S390_GUEST=y
# end of Virtualization

#
# Selftests
#
CONFIG_S390_UNWIND_SELFTEST=m
# CONFIG_S390_MODULES_SANITY_TEST is not set
# end of Selftests

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_GENERIC_ENTRY=y
# CONFIG_KPROBES is not set
# CONFIG_JUMP_LABEL is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_ARCH_32BIT_USTAT_F_TINODE=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_TABLE_FREE=y
CONFIG_MMU_GATHER_RCU_TABLE_FREE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_MMU_GATHER_NO_GATHER=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
CONFIG_SECCOMP_CACHE_DEBUG=y
CONFIG_LTO_NONE=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_IDLE=y
CONFIG_ARCH_HAS_SCALED_CPUTIME=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ALTERNATE_USER_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_CLONE_BACKWARDS2=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
# CONFIG_VMAP_STACK is not set
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_HAS_VDSO_DATA=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULE_SIG_FORMAT=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_MODULE_SIG=y
CONFIG_MODULE_SIG_FORCE=y
# CONFIG_MODULE_SIG_ALL is not set

#
# Do not forget to sign required modules with scripts/sign-file
#
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not set
CONFIG_MODULE_SIG_SHA512=y
CONFIG_MODULE_SIG_HASH="sha512"
# CONFIG_MODULE_COMPRESS_NONE is not set
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
CONFIG_MODULE_COMPRESS_ZSTD=y
CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_ICQ=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
CONFIG_BLK_DEBUG_FS=y
CONFIG_BLK_SED_OPAL=y
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_IBM_PARTITION=y
CONFIG_MAC_PARTITION=y
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set
CONFIG_SYSV68_PARTITION=y
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=m
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=m
# end of IO Schedulers

CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK=y
CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_READ_TRYLOCK=y
CONFIG_ARCH_INLINE_READ_LOCK=y
CONFIG_ARCH_INLINE_READ_LOCK_BH=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_READ_UNLOCK=y
CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
CONFIG_ARCH_INLINE_WRITE_TRYLOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK=y
CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_STATE=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_BINFMT_SCRIPT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lz4"
CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud"
CONFIG_ZBUD=y
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=m
# CONFIG_ZSMALLOC_STAT is not set

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
CONFIG_SLUB_STATS=y
# CONFIG_SLUB_CPU_PARTIAL is not set
# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
CONFIG_COMPAT_BRK=y
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK_PHYS_MAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
# CONFIG_COMPACTION is not set
CONFIG_PAGE_REPORTING=y
# CONFIG_MIGRATION is not set
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_TRANSPARENT_HUGEPAGE is not set
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
CONFIG_PAGE_IDLE_FLAG=y
CONFIG_IDLE_PAGE_TRACKING=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ZONE_DMA=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
CONFIG_GUP_TEST=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
CONFIG_LRU_GEN_STATS=y

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=m
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
CONFIG_IUCV=m
CONFIG_AFIUCV=y
# CONFIG_XDP_SOCKETS is not set
# CONFIG_INET is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
CONFIG_ATM=y
# CONFIG_ATM_LANE is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
CONFIG_LLC=y
CONFIG_LLC2=y
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
CONFIG_LAPB=m
# CONFIG_PHONET is not set
CONFIG_IEEE802154=y
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
CONFIG_MAC802154=m
# CONFIG_NET_SCHED is not set
CONFIG_DCB=y
# CONFIG_DNS_RESOLVER is not set
CONFIG_BATMAN_ADV=m
CONFIG_BATMAN_ADV_BATMAN_V=y
CONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not set
CONFIG_VSOCKETS=y
CONFIG_VSOCKETS_DIAG=y
CONFIG_VSOCKETS_LOOPBACK=y
CONFIG_VIRTIO_VSOCKETS=m
CONFIG_VIRTIO_VSOCKETS_COMMON=y
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=m
CONFIG_MPLS_ROUTING=m
CONFIG_NET_NSH=m
CONFIG_HSR=m
# CONFIG_QRTR is not set
# CONFIG_PCPU_DEV_REFCNT is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# end of Network testing
# end of Networking options

CONFIG_CAN=m
# CONFIG_CAN_RAW is not set
CONFIG_CAN_BCM=m
# CONFIG_CAN_GW is not set
CONFIG_CAN_J1939=m
CONFIG_CAN_ISOTP=m
CONFIG_MCTP=y
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
# CONFIG_NET_9P is not set
CONFIG_CAIF=y
# CONFIG_CAIF_DEBUG is not set
CONFIG_CAIF_NETDEV=m
CONFIG_CAIF_USB=m
# CONFIG_NFC is not set
CONFIG_PSAMPLE=m
CONFIG_NET_IFE=m
# CONFIG_LWTUNNEL is not set
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
# CONFIG_FAILOVER is not set
CONFIG_ETHTOOL_NETLINK=y
# CONFIG_NETDEV_ADDR_LIST_TEST is not set

#
# Device Drivers
#
CONFIG_HAVE_PCI=y
# CONFIG_PCI is not set
# CONFIG_PCCARD is not set

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
# CONFIG_DEVTMPFS_SAFE is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_FW_LOADER_PAGED_BUF=y
CONFIG_FW_LOADER_SYSFS=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
# CONFIG_FW_LOADER_COMPRESS is not set
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_WANT_DEV_COREDUMP=y
CONFIG_ALLOW_DEV_COREDUMP=y
CONFIG_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_SYS_HYPERVISOR=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPMI=m
CONFIG_REGMAP_MMIO=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
CONFIG_MHI_BUS=y
CONFIG_MHI_BUS_DEBUG=y
CONFIG_MHI_BUS_EP=y
# end of Bus devices

CONFIG_CONNECTOR=m

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

CONFIG_GNSS=m
# CONFIG_GNSS_MTK_SERIAL is not set
CONFIG_GNSS_SIRF_SERIAL=m
# CONFIG_GNSS_UBX_SERIAL is not set
# CONFIG_MTD is not set
CONFIG_DTC=y
CONFIG_OF=y
CONFIG_OF_UNITTEST=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_KOBJ=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_IRQ=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OF_RESOLVE=y
# CONFIG_OF_OVERLAY is not set
# CONFIG_BLK_DEV is not set

#
# NVME Support
#
CONFIG_NVME_COMMON=m
CONFIG_NVME_CORE=m
# CONFIG_NVME_MULTIPATH is not set
CONFIG_NVME_VERBOSE_ERRORS=y
CONFIG_NVME_FABRICS=m
CONFIG_NVME_FC=m
# CONFIG_NVME_AUTH is not set
CONFIG_NVME_TARGET=m
# CONFIG_NVME_TARGET_PASSTHRU is not set
# CONFIG_NVME_TARGET_LOOP is not set
# CONFIG_NVME_TARGET_FC is not set
CONFIG_NVME_TARGET_AUTH=y
# end of NVME Support

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
CONFIG_ICS932S401=m
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
CONFIG_ISL29020=m
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_SENSORS_BH1770=y
CONFIG_SENSORS_APDS990X=y
# CONFIG_HMC6352 is not set
CONFIG_DS1682=m
# CONFIG_OPEN_DICE is not set
CONFIG_C2PORT=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
CONFIG_EEPROM_IDT_89HPESX=m
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
# end of Texas Instruments shared transport line discipline

CONFIG_SENSORS_LIS3_I2C=m
CONFIG_ALTERA_STAPL=y
CONFIG_ECHO=m
CONFIG_UACCE=y
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_SG is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_CHR_DEV_SCH=m
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
CONFIG_SCSI_SRP_ATTRS=m
# end of SCSI Transports

# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
CONFIG_SCSI_DH_EMC=y
# CONFIG_SCSI_DH_ALUA is not set
# end of SCSI device support

CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
CONFIG_MD_RAID10=m
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
CONFIG_BCACHE_CLOSURES_DEBUG=y
CONFIG_BCACHE_ASYNC_REGISTRATION=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=y
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
CONFIG_DM_UNSTRIPED=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
CONFIG_DM_WRITECACHE=m
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
# CONFIG_DM_MULTIPATH_ST is not set
CONFIG_DM_MULTIPATH_HST=m
CONFIG_DM_MULTIPATH_IOA=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_DUST=m
CONFIG_DM_INIT=y
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
CONFIG_DM_VERITY=m
CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG=y
CONFIG_DM_VERITY_FEC=y
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
CONFIG_DM_INTEGRITY=y
CONFIG_DM_AUDIT=y
CONFIG_TARGET_CORE=m
# CONFIG_TCM_IBLOCK is not set
# CONFIG_TCM_FILEIO is not set
# CONFIG_TCM_PSCSI is not set
CONFIG_LOOPBACK_TARGET=m
# CONFIG_NETDEVICES is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_SPARSEKMAP is not set
CONFIG_INPUT_MATRIXKMAP=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
CONFIG_MOUSE_PS2_SMBUS=y
# CONFIG_MOUSE_SERIAL is not set
CONFIG_MOUSE_CYAPA=m
CONFIG_MOUSE_ELAN_I2C=m
CONFIG_MOUSE_ELAN_I2C_I2C=y
# CONFIG_MOUSE_ELAN_I2C_SMBUS is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_AD714X=m
CONFIG_INPUT_AD714X_I2C=m
CONFIG_INPUT_ATMEL_CAPTOUCH=m
CONFIG_INPUT_BMA150=m
CONFIG_INPUT_E3X0_BUTTON=y
CONFIG_INPUT_MMA8450=y
CONFIG_INPUT_GPIO_BEEPER=m
CONFIG_INPUT_GPIO_DECODER=m
# CONFIG_INPUT_GPIO_VIBRA is not set
CONFIG_INPUT_KXTJ9=y
# CONFIG_INPUT_REGULATOR_HAPTIC is not set
CONFIG_INPUT_UINPUT=m
CONFIG_INPUT_PCF8574=y
# CONFIG_INPUT_PWM_BEEPER is not set
# CONFIG_INPUT_PWM_VIBRA is not set
CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
CONFIG_INPUT_DA7280_HAPTICS=m
CONFIG_INPUT_ADXL34X=y
# CONFIG_INPUT_ADXL34X_I2C is not set
CONFIG_INPUT_IQS269A=m
CONFIG_INPUT_IQS626A=m
CONFIG_INPUT_IQS7222=y
CONFIG_INPUT_CMA3000=m
CONFIG_INPUT_CMA3000_I2C=m
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
CONFIG_INPUT_DRV2667_HAPTICS=y
CONFIG_RMI4_CORE=y
CONFIG_RMI4_I2C=y
CONFIG_RMI4_SMB=m
CONFIG_RMI4_F03=y
CONFIG_RMI4_F03_SERIO=y
CONFIG_RMI4_2D_SENSOR=y
CONFIG_RMI4_F11=y
CONFIG_RMI4_F12=y
CONFIG_RMI4_F30=y
CONFIG_RMI4_F34=y
# CONFIG_RMI4_F3A is not set
CONFIG_RMI4_F55=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_LIBPS2=m
CONFIG_SERIO_RAW=m
# CONFIG_SERIO_PS2MULT is not set
CONFIG_SERIO_GPIO_PS2=m
CONFIG_USERIO=y
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_LDISC_AUTOLOAD=y
# CONFIG_N_GSM is not set
CONFIG_NULL_TTY=y
CONFIG_HVC_DRIVER=y
# CONFIG_HVC_IUCV is not set
CONFIG_RPMSG_TTY=y
CONFIG_SERIAL_DEV_BUS=y
CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_HW_RANDOM_S390 is not set
# CONFIG_DEVMEM is not set
CONFIG_HANGCHECK_TIMER=m

#
# S/390 character device drivers
#
CONFIG_TN3270=m
# CONFIG_TN3270_TTY is not set
# CONFIG_TN3270_FS is not set
# CONFIG_TN3215 is not set
# CONFIG_SCLP_TTY is not set
CONFIG_SCLP_VT220_TTY=y
CONFIG_SCLP_VT220_CONSOLE=y
# CONFIG_HMC_DRV is not set
# CONFIG_SCLP_OFB is not set
CONFIG_S390_UV_UAPI=y
CONFIG_S390_TAPE=y

#
# S/390 tape hardware support
#
CONFIG_S390_TAPE_34XX=y
# CONFIG_S390_TAPE_3590 is not set
CONFIG_VMLOGRDR=m
# CONFIG_VMCP is not set
CONFIG_MONREADER=m
CONFIG_MONWRITER=y
CONFIG_S390_VMUR=y
CONFIG_XILLYBUS_CLASS=y
CONFIG_XILLYBUS=y
CONFIG_XILLYBUS_OF=m
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_ARB_GPIO_CHALLENGE is not set
CONFIG_I2C_MUX_GPIO=m
CONFIG_I2C_MUX_GPMUX=m
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_PINCTRL is not set
CONFIG_I2C_DEMUX_PINCTRL=m
CONFIG_I2C_MUX_MLXCPLD=m
# end of Multiplexer I2C Chip support

# CONFIG_I2C_HELPER_AUTO is not set
# CONFIG_I2C_SMBUS is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
# end of I2C Algorithms

# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
# end of I2C support

# CONFIG_I3C is not set
CONFIG_SPMI=m
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
CONFIG_PPS_CLIENT_GPIO=m

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_PTP_1588_CLOCK_IDT82P33=m
CONFIG_PTP_1588_CLOCK_IDTCM=m
# end of PTP clock support

CONFIG_PINCTRL=y
CONFIG_PINMUX=y
CONFIG_PINCONF=y
CONFIG_GENERIC_PINCONF=y
CONFIG_DEBUG_PINCTRL=y
# CONFIG_PINCTRL_CY8C95X0 is not set
CONFIG_PINCTRL_MCP23S08_I2C=m
CONFIG_PINCTRL_MCP23S08=m
CONFIG_PINCTRL_SX150X=y

#
# Renesas pinctrl drivers
#
# end of Renesas pinctrl drivers

CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIOLIB_IRQCHIP=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_CDEV=y
CONFIG_GPIO_CDEV_V1=y
CONFIG_GPIO_MAX730X=y

#
# I2C GPIO expanders
#
CONFIG_GPIO_MAX7300=y
CONFIG_GPIO_MAX732X=y
# CONFIG_GPIO_MAX732X_IRQ is not set
CONFIG_GPIO_PCA953X=y
# CONFIG_GPIO_PCA953X_IRQ is not set
# CONFIG_GPIO_PCA9570 is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TPIC2810=y
# end of I2C GPIO expanders

#
# MFD GPIO expanders
#
# end of MFD GPIO expanders

#
# Virtual GPIO drivers
#
CONFIG_GPIO_AGGREGATOR=m
# CONFIG_GPIO_MOCKUP is not set
CONFIG_GPIO_VIRTIO=m
CONFIG_GPIO_SIM=m
# end of Virtual GPIO drivers

CONFIG_POWER_RESET=y
CONFIG_POWER_RESET_REGULATOR=y
CONFIG_POWER_RESET_RESTART=y
# CONFIG_NVMEM_REBOOT_MODE is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_GENERIC_ADC_BATTERY=m
CONFIG_IP5XXX_POWER=m
CONFIG_TEST_POWER=m
CONFIG_CHARGER_ADP5061=m
CONFIG_BATTERY_CW2015=m
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
CONFIG_BATTERY_SBS=y
CONFIG_CHARGER_SBS=m
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
CONFIG_BATTERY_MAX17040=y
CONFIG_BATTERY_MAX17042=m
# CONFIG_CHARGER_MAX8903 is not set
CONFIG_CHARGER_LP8727=y
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_MANAGER is not set
CONFIG_CHARGER_LT3651=m
CONFIG_CHARGER_LTC4162L=m
CONFIG_CHARGER_DETECTOR_MAX14656=y
CONFIG_CHARGER_MAX77976=m
CONFIG_CHARGER_BQ2415X=y
CONFIG_CHARGER_BQ24257=m
# CONFIG_CHARGER_BQ24735 is not set
CONFIG_CHARGER_BQ2515X=m
CONFIG_CHARGER_BQ25890=m
CONFIG_CHARGER_BQ25980=y
CONFIG_CHARGER_BQ256XX=y
CONFIG_CHARGER_SMB347=y
CONFIG_BATTERY_GAUGE_LTC2941=m
CONFIG_BATTERY_RT5033=m
# CONFIG_CHARGER_RT9455 is not set
CONFIG_CHARGER_UCS1002=y
CONFIG_CHARGER_BD99954=m
CONFIG_BATTERY_UG3105=m
# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is not set
CONFIG_WATCHDOG_OPEN_TIMEOUT=0
# CONFIG_WATCHDOG_SYSFS is not set
CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT=y

#
# Watchdog Pretimeout Governors
#
CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m
CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=m
# CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC is not set
CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_SOFT_WATCHDOG_PRETIMEOUT=y
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_MEN_A21_WDT is not set
CONFIG_DIAG288_WATCHDOG=y
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
CONFIG_REGULATOR_USERSPACE_CONSUMER=y
CONFIG_REGULATOR_88PG86X=m
CONFIG_REGULATOR_ACT8865=y
CONFIG_REGULATOR_AD5398=m
CONFIG_REGULATOR_DA9121=m
CONFIG_REGULATOR_DA9210=y
CONFIG_REGULATOR_DA9211=y
# CONFIG_REGULATOR_FAN53555 is not set
CONFIG_REGULATOR_FAN53880=m
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_ISL9305=y
CONFIG_REGULATOR_ISL6271A=m
CONFIG_REGULATOR_LP3971=m
CONFIG_REGULATOR_LP3972=y
CONFIG_REGULATOR_LP872X=m
# CONFIG_REGULATOR_LP8755 is not set
CONFIG_REGULATOR_LTC3589=m
CONFIG_REGULATOR_LTC3676=m
# CONFIG_REGULATOR_MAX1586 is not set
CONFIG_REGULATOR_MAX8649=y
CONFIG_REGULATOR_MAX8660=m
CONFIG_REGULATOR_MAX8893=m
CONFIG_REGULATOR_MAX8952=m
CONFIG_REGULATOR_MAX20086=y
CONFIG_REGULATOR_MAX77826=y
CONFIG_REGULATOR_MCP16502=m
# CONFIG_REGULATOR_MP5416 is not set
# CONFIG_REGULATOR_MP8859 is not set
# CONFIG_REGULATOR_MP886X is not set
CONFIG_REGULATOR_MPQ7920=y
CONFIG_REGULATOR_MT6311=y
CONFIG_REGULATOR_MT6315=m
CONFIG_REGULATOR_PCA9450=m
CONFIG_REGULATOR_PF8X00=m
CONFIG_REGULATOR_PFUZE100=m
CONFIG_REGULATOR_PV88060=y
CONFIG_REGULATOR_PV88080=y
# CONFIG_REGULATOR_PV88090 is not set
# CONFIG_REGULATOR_PWM is not set
CONFIG_REGULATOR_QCOM_SPMI=m
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
CONFIG_REGULATOR_RT4801=y
CONFIG_REGULATOR_RT5190A=y
CONFIG_REGULATOR_RT5759=m
CONFIG_REGULATOR_RT6160=m
CONFIG_REGULATOR_RT6245=y
CONFIG_REGULATOR_RTQ2134=m
CONFIG_REGULATOR_RTMV20=y
# CONFIG_REGULATOR_RTQ6752 is not set
CONFIG_REGULATOR_SLG51000=y
CONFIG_REGULATOR_SY8106A=y
# CONFIG_REGULATOR_SY8824X is not set
CONFIG_REGULATOR_SY8827N=m
CONFIG_REGULATOR_TPS51632=y
CONFIG_REGULATOR_TPS62360=m
# CONFIG_REGULATOR_TPS6286X is not set
# CONFIG_REGULATOR_TPS65023 is not set
CONFIG_REGULATOR_TPS6507X=m
# CONFIG_REGULATOR_TPS65132 is not set
# CONFIG_REGULATOR_VCTRL is not set
CONFIG_REGULATOR_QCOM_LABIBB=m
CONFIG_RC_CORE=m
# CONFIG_LIRC is not set
# CONFIG_RC_MAP is not set
CONFIG_RC_DECODERS=y
CONFIG_IR_IMON_DECODER=m
# CONFIG_IR_JVC_DECODER is not set
# CONFIG_IR_MCE_KBD_DECODER is not set
# CONFIG_IR_NEC_DECODER is not set
CONFIG_IR_RC5_DECODER=m
CONFIG_IR_RC6_DECODER=m
CONFIG_IR_RCMM_DECODER=m
# CONFIG_IR_SANYO_DECODER is not set
CONFIG_IR_SHARP_DECODER=m
CONFIG_IR_SONY_DECODER=m
# CONFIG_IR_XMP_DECODER is not set
CONFIG_RC_DEVICES=y
# CONFIG_IR_GPIO_CIR is not set
CONFIG_IR_SERIAL=m
# CONFIG_IR_SERIAL_TRANSMITTER is not set
CONFIG_RC_LOOPBACK=m

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

#
# Graphics support
#

#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
# end of Console display driver support
# end of Graphics support

#
# HID support
#
CONFIG_HID=y
CONFIG_HID_BATTERY_STRENGTH=y
# CONFIG_HIDRAW is not set
CONFIG_UHID=m
# CONFIG_HID_GENERIC is not set

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_ACRUX=m
# CONFIG_HID_ACRUX_FF is not set
CONFIG_HID_APPLE=m
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
# CONFIG_HID_CHERRY is not set
CONFIG_HID_COUGAR=y
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EMS_FF=y
CONFIG_HID_ELECOM=m
CONFIG_HID_EZKEY=y
CONFIG_HID_GEMBIRD=m
CONFIG_HID_GFRM=y
CONFIG_HID_GLORIOUS=m
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
CONFIG_HID_WALTOP=y
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_ICADE=y
CONFIG_HID_ITE=m
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=m
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LCPOWER=y
# CONFIG_HID_LED is not set
CONFIG_HID_LENOVO=m
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MALTRON=y
CONFIG_HID_MAYFLASH=y
CONFIG_HID_REDRAGON=m
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NINTENDO is not set
CONFIG_HID_NTI=y
CONFIG_HID_ORTEK=y
# CONFIG_HID_PANTHERLORD is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_PICOLCD=y
CONFIG_HID_PLANTRONICS=y
CONFIG_HID_PLAYSTATION=m
# CONFIG_PLAYSTATION_FF is not set
CONFIG_HID_PXRC=y
CONFIG_HID_RAZER=m
CONFIG_HID_PRIMAX=m
CONFIG_HID_SAITEK=m
# CONFIG_HID_SEMITEK is not set
CONFIG_HID_SPEEDLINK=m
CONFIG_HID_STEAM=m
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
CONFIG_HID_RMI=y
# CONFIG_HID_GREENASIA is not set
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
CONFIG_HID_TOPRE=y
# CONFIG_HID_THINGM is not set
CONFIG_HID_UDRAW_PS3=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
# CONFIG_HID_ZEROPLUS is not set
CONFIG_HID_ZYDACRON=y
CONFIG_HID_ALPS=y
# end of Special HID drivers

#
# I2C HID support
#
CONFIG_I2C_HID_OF=y
CONFIG_I2C_HID_OF_ELAN=y
# CONFIG_I2C_HID_OF_GOODIX is not set
# end of I2C HID support

CONFIG_I2C_HID_CORE=y
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_SCSI_UFSHCD=y
# CONFIG_SCSI_UFS_BSG is not set
CONFIG_SCSI_UFS_HPB=y
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
# CONFIG_MS_BLOCK is not set

#
# MemoryStick Host Controller Drivers
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
# CONFIG_LEDS_CLASS_FLASH is not set
CONFIG_LEDS_CLASS_MULTICOLOR=m
CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y

#
# LED drivers
#
CONFIG_LEDS_AN30259A=m
CONFIG_LEDS_AW2013=m
CONFIG_LEDS_LM3530=m
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_LM3692X is not set
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_PCA9532_GPIO=y
CONFIG_LEDS_GPIO=m
CONFIG_LEDS_LP3944=m
CONFIG_LEDS_LP3952=m
CONFIG_LEDS_LP50XX=m
CONFIG_LEDS_LP55XX_COMMON=m
CONFIG_LEDS_LP5521=m
CONFIG_LEDS_LP5523=m
CONFIG_LEDS_LP5562=m
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_LP8860=m
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
CONFIG_LEDS_PCA963X=m
CONFIG_LEDS_PWM=m
CONFIG_LEDS_REGULATOR=m
# CONFIG_LEDS_BD2802 is not set
CONFIG_LEDS_LT3593=m
CONFIG_LEDS_TCA6507=m
# CONFIG_LEDS_TLC591XX is not set
CONFIG_LEDS_LM355x=m
# CONFIG_LEDS_IS31FL319X is not set
CONFIG_LEDS_IS31FL32XX=m

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
CONFIG_LEDS_BLINKM=m
CONFIG_LEDS_MLXREG=m
CONFIG_LEDS_USER=m
CONFIG_LEDS_TI_LMU_COMMON=m
CONFIG_LEDS_LM3697=m

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#
# CONFIG_LEDS_PWM_MULTICOLOR is not set
# CONFIG_LEDS_QCOM_LPG is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_CPU=y
CONFIG_LEDS_TRIGGER_ACTIVITY=y
CONFIG_LEDS_TRIGGER_GPIO=m
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
CONFIG_LEDS_TRIGGER_TRANSIENT=y
CONFIG_LEDS_TRIGGER_CAMERA=y
CONFIG_LEDS_TRIGGER_PANIC=y
CONFIG_LEDS_TRIGGER_NETDEV=m
CONFIG_LEDS_TRIGGER_PATTERN=m
CONFIG_LEDS_TRIGGER_AUDIO=y
CONFIG_LEDS_TRIGGER_TTY=y

#
# Simple LED drivers
#
CONFIG_ACCESSIBILITY=y

#
# Speakup console speech
#
CONFIG_SPEAKUP=y
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
CONFIG_SPEAKUP_SYNTH_APOLLO=y
# CONFIG_SPEAKUP_SYNTH_AUDPTR is not set
# CONFIG_SPEAKUP_SYNTH_BNS is not set
# CONFIG_SPEAKUP_SYNTH_DECTLK is not set
CONFIG_SPEAKUP_SYNTH_DECEXT=y
# CONFIG_SPEAKUP_SYNTH_LTLK is not set
# CONFIG_SPEAKUP_SYNTH_SOFT is not set
CONFIG_SPEAKUP_SYNTH_SPKOUT=y
# CONFIG_SPEAKUP_SYNTH_TXPRT is not set
CONFIG_SPEAKUP_SYNTH_DUMMY=m
# end of Speakup console speech

CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_VIRTUAL_CHANNELS=y
CONFIG_DMA_OF=y
CONFIG_FSL_EDMA=y
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_QCOM_HIDMA is not set

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
CONFIG_DMABUF_SYSFS_STATS=y
# CONFIG_DMABUF_HEAPS_SYSTEM is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
CONFIG_VFIO=m
CONFIG_VFIO_IOMMU_TYPE1=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_MDEV=m
CONFIG_IRQ_BYPASS_MANAGER=m
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_ANCHOR=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_VDPA=m
# CONFIG_VIRTIO_BALLOON is not set
# CONFIG_VIRTIO_INPUT is not set
CONFIG_VDPA=m
CONFIG_VDPA_USER=m
CONFIG_VHOST_IOTLB=m
CONFIG_VHOST=m
CONFIG_VHOST_MENU=y
CONFIG_VHOST_NET=m
# CONFIG_VHOST_SCSI is not set
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST_VDPA=m
CONFIG_VHOST_CROSS_ENDIAN_LEGACY=y

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

CONFIG_GREYBUS=y
CONFIG_COMEDI=y
CONFIG_COMEDI_DEBUG=y
CONFIG_COMEDI_DEFAULT_BUF_SIZE_KB=2048
CONFIG_COMEDI_DEFAULT_BUF_MAXSIZE_KB=20480
# CONFIG_COMEDI_MISC_DRIVERS is not set
CONFIG_COMEDI_ISA_DRIVERS=y
CONFIG_COMEDI_PCL711=y
CONFIG_COMEDI_PCL724=y
# CONFIG_COMEDI_PCL726 is not set
# CONFIG_COMEDI_PCL730 is not set
# CONFIG_COMEDI_PCL812 is not set
CONFIG_COMEDI_PCL816=y
CONFIG_COMEDI_PCL818=y
CONFIG_COMEDI_PCM3724=m
CONFIG_COMEDI_AMPLC_DIO200_ISA=y
CONFIG_COMEDI_AMPLC_PC236_ISA=y
# CONFIG_COMEDI_AMPLC_PC263_ISA is not set
CONFIG_COMEDI_RTI800=y
CONFIG_COMEDI_RTI802=m
# CONFIG_COMEDI_DAC02 is not set
# CONFIG_COMEDI_DAS16M1 is not set
CONFIG_COMEDI_DAS08_ISA=m
# CONFIG_COMEDI_DAS16 is not set
CONFIG_COMEDI_DAS800=m
# CONFIG_COMEDI_DAS1800 is not set
# CONFIG_COMEDI_DAS6402 is not set
CONFIG_COMEDI_DT2801=m
CONFIG_COMEDI_DT2811=y
# CONFIG_COMEDI_DT2814 is not set
CONFIG_COMEDI_DT2815=y
CONFIG_COMEDI_DT2817=m
CONFIG_COMEDI_DT282X=m
CONFIG_COMEDI_DMM32AT=y
CONFIG_COMEDI_FL512=m
CONFIG_COMEDI_AIO_AIO12_8=m
CONFIG_COMEDI_AIO_IIRO_16=y
# CONFIG_COMEDI_C6XDIGIO is not set
CONFIG_COMEDI_MPC624=y
# CONFIG_COMEDI_ADQ12B is not set
CONFIG_COMEDI_NI_AT_A2150=m
CONFIG_COMEDI_NI_AT_AO=y
# CONFIG_COMEDI_NI_ATMIO is not set
CONFIG_COMEDI_NI_ATMIO16D=m
# CONFIG_COMEDI_NI_LABPC_ISA is not set
CONFIG_COMEDI_PCMAD=y
# CONFIG_COMEDI_PCMDA12 is not set
CONFIG_COMEDI_PCMMIO=y
CONFIG_COMEDI_PCMUIO=m
CONFIG_COMEDI_MULTIQ3=m
CONFIG_COMEDI_S526=y
CONFIG_COMEDI_8254=y
CONFIG_COMEDI_8255=y
CONFIG_COMEDI_8255_SA=m
# CONFIG_COMEDI_KCOMEDILIB is not set
CONFIG_COMEDI_AMPLC_DIO200=y
CONFIG_COMEDI_AMPLC_PC236=y
CONFIG_COMEDI_DAS08=m
CONFIG_COMEDI_TESTS=y
CONFIG_COMEDI_TESTS_EXAMPLE=m
# CONFIG_COMEDI_TESTS_NI_ROUTES is not set
# CONFIG_STAGING is not set
# CONFIG_COMMON_CLK is not set
CONFIG_HWSPINLOCK=y

#
# Clock Source drivers
#
# CONFIG_MICROCHIP_PIT64B is not set
# end of Clock Source drivers

CONFIG_MAILBOX=y
CONFIG_IOMMU_IOVA=m
CONFIG_IOMMU_API=y
# CONFIG_IOMMU_SUPPORT is not set

#
# Remoteproc drivers
#
CONFIG_REMOTEPROC=y
CONFIG_REMOTEPROC_CDEV=y
# end of Remoteproc drivers

#
# Rpmsg drivers
#
CONFIG_RPMSG=y
# CONFIG_RPMSG_CHAR is not set
CONFIG_RPMSG_CTRL=m
CONFIG_RPMSG_NS=y
CONFIG_RPMSG_VIRTIO=y
# end of Rpmsg drivers

CONFIG_SOUNDWIRE=m

#
# SoundWire Devices
#

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

CONFIG_SOC_TI=y

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
CONFIG_DEVFREQ_GOV_PERFORMANCE=y
CONFIG_DEVFREQ_GOV_POWERSAVE=y
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
CONFIG_DEVFREQ_GOV_PASSIVE=m

#
# DEVFREQ Drivers
#
CONFIG_PM_DEVFREQ_EVENT=y
# CONFIG_EXTCON is not set
CONFIG_MEMORY=y
CONFIG_IIO=y
CONFIG_IIO_BUFFER=y
CONFIG_IIO_BUFFER_CB=m
CONFIG_IIO_BUFFER_DMA=y
CONFIG_IIO_BUFFER_DMAENGINE=y
CONFIG_IIO_BUFFER_HW_CONSUMER=y
CONFIG_IIO_KFIFO_BUF=y
CONFIG_IIO_TRIGGERED_BUFFER=y
CONFIG_IIO_CONFIGFS=m
CONFIG_IIO_TRIGGER=y
CONFIG_IIO_CONSUMERS_PER_TRIGGER=2
# CONFIG_IIO_SW_DEVICE is not set
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_TRIGGERED_EVENT=y

#
# Accelerometers
#
# CONFIG_ADXL313_I2C is not set
# CONFIG_ADXL355_I2C is not set
CONFIG_ADXL367=m
CONFIG_ADXL367_I2C=m
CONFIG_ADXL372=y
CONFIG_ADXL372_I2C=y
# CONFIG_BMA400 is not set
CONFIG_BMC150_ACCEL=m
CONFIG_BMC150_ACCEL_I2C=m
# CONFIG_DA280 is not set
CONFIG_DA311=y
CONFIG_DMARD06=m
CONFIG_DMARD09=m
CONFIG_DMARD10=m
# CONFIG_FXLS8962AF_I2C is not set
CONFIG_IIO_ST_ACCEL_3AXIS=m
CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m
CONFIG_KXSD9=y
CONFIG_KXSD9_I2C=m
# CONFIG_KXCJK1013 is not set
CONFIG_MC3230=m
CONFIG_MMA7455=m
CONFIG_MMA7455_I2C=m
CONFIG_MMA7660=m
# CONFIG_MMA8452 is not set
CONFIG_MMA9551_CORE=m
CONFIG_MMA9551=m
# CONFIG_MMA9553 is not set
CONFIG_MSA311=y
# CONFIG_MXC4005 is not set
CONFIG_MXC6255=y
CONFIG_STK8312=y
# CONFIG_STK8BA50 is not set
# end of Accelerometers

#
# Analog to digital converters
#
CONFIG_AD7091R5=y
CONFIG_AD7291=m
CONFIG_AD799X=y
CONFIG_ENVELOPE_DETECTOR=y
CONFIG_HX711=y
CONFIG_INA2XX_ADC=y
# CONFIG_LTC2471 is not set
CONFIG_LTC2485=m
CONFIG_LTC2497=y
# CONFIG_MAX1363 is not set
# CONFIG_MAX9611 is not set
# CONFIG_MCP3422 is not set
CONFIG_NAU7802=y
CONFIG_QCOM_VADC_COMMON=m
# CONFIG_QCOM_SPMI_IADC is not set
CONFIG_QCOM_SPMI_VADC=m
CONFIG_QCOM_SPMI_ADC5=m
CONFIG_RICHTEK_RTQ6056=y
CONFIG_SD_ADC_MODULATOR=m
CONFIG_TI_ADC081C=m
# CONFIG_TI_ADS1015 is not set
# end of Analog to digital converters

#
# Analog to digital and digital to analog converters
#
# end of Analog to digital and digital to analog converters

#
# Analog Front Ends
#
CONFIG_IIO_RESCALE=m
# end of Analog Front Ends

#
# Amplifiers
#
CONFIG_HMC425=y
# end of Amplifiers

#
# Capacitance to digital converters
#
CONFIG_AD7150=y
# CONFIG_AD7746 is not set
# end of Capacitance to digital converters

#
# Chemical Sensors
#
CONFIG_ATLAS_PH_SENSOR=m
# CONFIG_ATLAS_EZO_SENSOR is not set
# CONFIG_BME680 is not set
# CONFIG_CCS811 is not set
CONFIG_IAQCORE=m
CONFIG_PMS7003=m
CONFIG_SCD30_CORE=y
CONFIG_SCD30_I2C=y
CONFIG_SCD30_SERIAL=m
CONFIG_SCD4X=m
CONFIG_SENSIRION_SGP30=y
# CONFIG_SENSIRION_SGP40 is not set
CONFIG_SPS30=y
CONFIG_SPS30_I2C=y
CONFIG_SPS30_SERIAL=m
# CONFIG_SENSEAIR_SUNRISE_CO2 is not set
# CONFIG_VZ89X is not set
# end of Chemical Sensors

#
# Hid Sensor IIO Common
#
# end of Hid Sensor IIO Common

CONFIG_IIO_MS_SENSORS_I2C=m

#
# IIO SCMI Sensors
#
# end of IIO SCMI Sensors

#
# SSP Sensor Common
#
# end of SSP Sensor Common

CONFIG_IIO_ST_SENSORS_I2C=y
CONFIG_IIO_ST_SENSORS_CORE=y

#
# Digital to analog converters
#
# CONFIG_AD5064 is not set
CONFIG_AD5380=m
# CONFIG_AD5446 is not set
# CONFIG_AD5593R is not set
# CONFIG_AD5696_I2C is not set
CONFIG_DPOT_DAC=m
CONFIG_DS4424=m
CONFIG_M62332=y
CONFIG_MAX517=y
CONFIG_MAX5821=m
CONFIG_MCP4725=m
CONFIG_TI_DAC5571=y
# end of Digital to analog converters

#
# IIO dummy driver
#
# end of IIO dummy driver

#
# Filters
#
# end of Filters

#
# Frequency Synthesizers DDS/PLL
#

#
# Clock Generator/Distribution
#
# end of Clock Generator/Distribution

#
# Phase-Locked Loop (PLL) frequency synthesizers
#
# end of Phase-Locked Loop (PLL) frequency synthesizers
# end of Frequency Synthesizers DDS/PLL

#
# Digital gyroscope sensors
#
CONFIG_BMG160=m
CONFIG_BMG160_I2C=m
CONFIG_FXAS21002C=y
CONFIG_FXAS21002C_I2C=y
# CONFIG_MPU3050_I2C is not set
# CONFIG_IIO_ST_GYRO_3AXIS is not set
CONFIG_ITG3200=m
# end of Digital gyroscope sensors

#
# Health Sensors
#

#
# Heart Rate Monitors
#
CONFIG_AFE4404=y
CONFIG_MAX30100=y
# CONFIG_MAX30102 is not set
# end of Heart Rate Monitors
# end of Health Sensors

#
# Humidity sensors
#
CONFIG_AM2315=y
CONFIG_DHT11=y
CONFIG_HDC100X=y
# CONFIG_HDC2010 is not set
# CONFIG_HTS221 is not set
# CONFIG_HTU21 is not set
CONFIG_SI7005=y
# CONFIG_SI7020 is not set
# end of Humidity sensors

#
# Inertial measurement units
#
CONFIG_BMI160=y
CONFIG_BMI160_I2C=y
CONFIG_BOSCH_BNO055=y
CONFIG_BOSCH_BNO055_SERIAL=y
CONFIG_BOSCH_BNO055_I2C=m
CONFIG_FXOS8700=m
CONFIG_FXOS8700_I2C=m
CONFIG_KMX61=m
# CONFIG_INV_ICM42600_I2C is not set
CONFIG_INV_MPU6050_IIO=m
CONFIG_INV_MPU6050_I2C=m
CONFIG_IIO_ST_LSM6DSX=y
CONFIG_IIO_ST_LSM6DSX_I2C=y
# CONFIG_IIO_ST_LSM9DS0 is not set
# end of Inertial measurement units

#
# Light sensors
#
CONFIG_ADJD_S311=m
# CONFIG_ADUX1020 is not set
CONFIG_AL3010=m
CONFIG_AL3320A=y
CONFIG_APDS9300=y
# CONFIG_APDS9960 is not set
CONFIG_AS73211=m
CONFIG_BH1750=m
CONFIG_BH1780=y
CONFIG_CM32181=y
# CONFIG_CM3232 is not set
# CONFIG_CM3323 is not set
CONFIG_CM3605=m
# CONFIG_CM36651 is not set
CONFIG_GP2AP002=y
# CONFIG_GP2AP020A00F is not set
# CONFIG_SENSORS_ISL29018 is not set
CONFIG_SENSORS_ISL29028=m
CONFIG_ISL29125=m
CONFIG_JSA1212=m
# CONFIG_RPR0521 is not set
# CONFIG_LTR501 is not set
CONFIG_LTRF216A=y
CONFIG_LV0104CS=y
CONFIG_MAX44000=m
CONFIG_MAX44009=m
CONFIG_NOA1305=m
# CONFIG_OPT3001 is not set
CONFIG_PA12203001=y
# CONFIG_SI1133 is not set
CONFIG_SI1145=m
CONFIG_STK3310=m
# CONFIG_ST_UVIS25 is not set
CONFIG_TCS3414=y
CONFIG_TCS3472=m
CONFIG_SENSORS_TSL2563=y
CONFIG_TSL2583=m
# CONFIG_TSL2591 is not set
# CONFIG_TSL2772 is not set
CONFIG_TSL4531=m
# CONFIG_US5182D is not set
CONFIG_VCNL4000=m
CONFIG_VCNL4035=m
CONFIG_VEML6030=m
CONFIG_VEML6070=m
CONFIG_VL6180=y
CONFIG_ZOPT2201=y
# end of Light sensors

#
# Magnetometer sensors
#
CONFIG_AK8974=m
CONFIG_AK8975=y
CONFIG_AK09911=y
CONFIG_BMC150_MAGN=y
CONFIG_BMC150_MAGN_I2C=y
CONFIG_MAG3110=y
CONFIG_MMC35240=m
CONFIG_IIO_ST_MAGN_3AXIS=y
CONFIG_IIO_ST_MAGN_I2C_3AXIS=y
CONFIG_SENSORS_HMC5843=y
CONFIG_SENSORS_HMC5843_I2C=y
# CONFIG_SENSORS_RM3100_I2C is not set
# CONFIG_YAMAHA_YAS530 is not set
# end of Magnetometer sensors

#
# Multiplexers
#
CONFIG_IIO_MUX=y
# end of Multiplexers

#
# Inclinometer sensors
#
# end of Inclinometer sensors

CONFIG_IIO_RESCALE_KUNIT_TEST=m
CONFIG_IIO_FORMAT_KUNIT_TEST=m

#
# Triggers - standalone
#
# CONFIG_IIO_HRTIMER_TRIGGER is not set
# CONFIG_IIO_INTERRUPT_TRIGGER is not set
CONFIG_IIO_TIGHTLOOP_TRIGGER=m
CONFIG_IIO_SYSFS_TRIGGER=y
# end of Triggers - standalone

#
# Linear and angular position sensors
#
# end of Linear and angular position sensors

#
# Digital potentiometers
#
CONFIG_AD5110=m
CONFIG_AD5272=m
# CONFIG_DS1803 is not set
CONFIG_MAX5432=y
CONFIG_MCP4018=m
CONFIG_MCP4531=y
CONFIG_TPL0102=y
# end of Digital potentiometers

#
# Digital potentiostats
#
CONFIG_LMP91000=m
# end of Digital potentiostats

#
# Pressure sensors
#
# CONFIG_ABP060MG is not set
CONFIG_BMP280=m
CONFIG_BMP280_I2C=m
CONFIG_DLHL60D=m
CONFIG_DPS310=y
# CONFIG_HP03 is not set
# CONFIG_ICP10100 is not set
# CONFIG_MPL115_I2C is not set
CONFIG_MPL3115=y
CONFIG_MS5611=m
# CONFIG_MS5611_I2C is not set
CONFIG_MS5637=m
CONFIG_IIO_ST_PRESS=m
CONFIG_IIO_ST_PRESS_I2C=m
CONFIG_T5403=y
CONFIG_HP206C=m
CONFIG_ZPA2326=m
CONFIG_ZPA2326_I2C=m
# end of Pressure sensors

#
# Lightning sensors
#
# end of Lightning sensors

#
# Proximity and distance sensors
#
CONFIG_ISL29501=m
CONFIG_LIDAR_LITE_V2=m
# CONFIG_MB1232 is not set
CONFIG_PING=y
CONFIG_RFD77402=y
CONFIG_SRF04=y
CONFIG_SX_COMMON=m
# CONFIG_SX9310 is not set
# CONFIG_SX9324 is not set
CONFIG_SX9360=m
CONFIG_SX9500=m
CONFIG_SRF08=m
# CONFIG_VCNL3020 is not set
# CONFIG_VL53L0X_I2C is not set
# end of Proximity and distance sensors

#
# Resolver to digital converters
#
# end of Resolver to digital converters

#
# Temperature sensors
#
CONFIG_MLX90614=y
# CONFIG_MLX90632 is not set
CONFIG_TMP006=m
CONFIG_TMP007=y
CONFIG_TMP117=y
CONFIG_TSYS01=m
# CONFIG_TSYS02D is not set
# end of Temperature sensors

CONFIG_PWM=y
CONFIG_PWM_SYSFS=y
CONFIG_PWM_DEBUG=y
CONFIG_PWM_ATMEL_TCB=m
CONFIG_PWM_PCA9685=m

#
# IRQ chip support
#
CONFIG_IRQCHIP=y
CONFIG_AL_FIC=y
# end of IRQ chip support

CONFIG_RESET_CONTROLLER=y
CONFIG_RESET_TI_TPS380X=m

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
CONFIG_PHY_CAN_TRANSCEIVER=m

#
# PHY drivers for Broadcom platforms
#
# end of PHY drivers for Broadcom platforms
# end of PHY Subsystem

CONFIG_POWERCAP=y
CONFIG_DTPM=y

#
# Performance monitor support
#
CONFIG_XILINX_APM_PMU=m
# end of Performance monitor support

# CONFIG_RAS is not set

#
# Android
#
CONFIG_ANDROID_BINDER_IPC=y
CONFIG_ANDROID_BINDERFS=y
CONFIG_ANDROID_BINDER_DEVICES="binder,hwbinder,vndbinder"
# CONFIG_ANDROID_BINDER_IPC_SELFTEST is not set
# end of Android

# CONFIG_DAX is not set
CONFIG_NVMEM=y
CONFIG_NVMEM_SYSFS=y
CONFIG_NVMEM_SPMI_SDAM=m

#
# HW tracing support
#
# CONFIG_STM is not set
# end of HW tracing support

CONFIG_FPGA=y
CONFIG_ALTERA_PR_IP_CORE=m
CONFIG_FPGA_BRIDGE=m
CONFIG_FPGA_REGION=m
# CONFIG_OF_FPGA_REGION is not set
CONFIG_FSI=m
CONFIG_FSI_NEW_DEV_NODE=y
CONFIG_FSI_MASTER_GPIO=m
CONFIG_FSI_MASTER_HUB=m
# CONFIG_FSI_SCOM is not set
CONFIG_MULTIPLEXER=y

#
# Multiplexer drivers
#
# CONFIG_MUX_ADG792A is not set
# CONFIG_MUX_GPIO is not set
# CONFIG_MUX_MMIO is not set
# end of Multiplexer drivers

CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
CONFIG_PECI=y
# CONFIG_PECI_CPU is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_EXT4_DEBUG=y
CONFIG_EXT4_KUNIT_TESTS=m
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
CONFIG_BTRFS_FS_RUN_SANITY_TESTS=y
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
CONFIG_BTRFS_FS_REF_VERIFY=y
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
CONFIG_OVERLAY_FS=y
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
CONFIG_OVERLAY_FS_XINO_AUTO=y
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
CONFIG_UDF_FS=y
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_FAT_KUNIT_TEST=m
CONFIG_EXFAT_FS=y
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
CONFIG_NTFS3_FS=m
# CONFIG_NTFS3_64BIT_CLUSTER is not set
# CONFIG_NTFS3_LZX_XPRESS is not set
CONFIG_NTFS3_FS_POSIX_ACL=y
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
CONFIG_ARCH_SUPPORTS_HUGETLBFS=y
# CONFIG_HUGETLBFS is not set
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=m
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
CONFIG_ORANGEFS_FS=m
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=y
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
CONFIG_EFS_FS=y
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=y
# CONFIG_SQUASHFS_FILE_CACHE is not set
CONFIG_SQUASHFS_FILE_DIRECT=y
# CONFIG_SQUASHFS_DECOMP_SINGLE is not set
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
# CONFIG_SQUASHFS_XATTR is not set
CONFIG_SQUASHFS_ZLIB=y
CONFIG_SQUASHFS_LZ4=y
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
CONFIG_SQUASHFS_ZSTD=y
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
# CONFIG_QNX6FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_PSTORE=m
CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240
CONFIG_PSTORE_DEFLATE_COMPRESS=m
CONFIG_PSTORE_LZO_COMPRESS=m
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
CONFIG_PSTORE_842_COMPRESS=y
CONFIG_PSTORE_ZSTD_COMPRESS=y
CONFIG_PSTORE_COMPRESS=y
# CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT is not set
# CONFIG_PSTORE_LZO_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_842_COMPRESS_DEFAULT=y
# CONFIG_PSTORE_ZSTD_COMPRESS_DEFAULT is not set
CONFIG_PSTORE_COMPRESS_DEFAULT="842"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_ZONE=m
CONFIG_PSTORE_BLK=m
CONFIG_PSTORE_BLK_BLKDEV=""
CONFIG_PSTORE_BLK_KMSG_SIZE=64
CONFIG_PSTORE_BLK_MAX_REASON=2
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
# CONFIG_NLS_CODEPAGE_860 is not set
CONFIG_NLS_CODEPAGE_861=m
# CONFIG_NLS_CODEPAGE_862 is not set
CONFIG_NLS_CODEPAGE_863=m
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
# CONFIG_NLS_CODEPAGE_932 is not set
CONFIG_NLS_CODEPAGE_949=y
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=m
# CONFIG_NLS_ISO8859_4 is not set
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=m
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
# CONFIG_NLS_ISO8859_15 is not set
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=m
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=y
# CONFIG_NLS_MAC_CYRILLIC is not set
CONFIG_NLS_MAC_GAELIC=y
CONFIG_NLS_MAC_GREEK=y
# CONFIG_NLS_MAC_ICELAND is not set
CONFIG_NLS_MAC_INUIT=m
# CONFIG_NLS_MAC_ROMANIAN is not set
CONFIG_NLS_MAC_TURKISH=m
# CONFIG_NLS_UTF8 is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
CONFIG_PERSISTENT_KEYRINGS=y
CONFIG_TRUSTED_KEYS=m

#
# No trust source selected!
#
CONFIG_ENCRYPTED_KEYS=y
# CONFIG_USER_DECRYPTED_DATA is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_KEY_NOTIFICATIONS is not set
CONFIG_SECURITY_DMESG_RESTRICT=y
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_PATH=y
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER=y
CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING=y
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_DEBUG=y
CONFIG_SECURITY_APPARMOR_DEBUG_ASSERTS=y
CONFIG_SECURITY_APPARMOR_DEBUG_MESSAGES=y
CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y
# CONFIG_SECURITY_APPARMOR_HASH is not set
# CONFIG_SECURITY_APPARMOR_EXPORT_BINARY is not set
# CONFIG_SECURITY_APPARMOR_PARANOID_LOAD is not set
# CONFIG_SECURITY_LOADPIN is not set
# CONFIG_SECURITY_YAMA is not set
CONFIG_SECURITY_SAFESETID=y
CONFIG_SECURITY_LOCKDOWN_LSM=y
CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y
CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y
# CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set
# CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set
# CONFIG_SECURITY_LANDLOCK is not set
CONFIG_INTEGRITY=y
CONFIG_INTEGRITY_SIGNATURE=y
# CONFIG_INTEGRITY_ASYMMETRIC_KEYS is not set
CONFIG_INTEGRITY_AUDIT=y
CONFIG_IMA=y
CONFIG_IMA_MEASURE_PCR_IDX=10
CONFIG_IMA_LSM_RULES=y
# CONFIG_IMA_NG_TEMPLATE is not set
CONFIG_IMA_SIG_TEMPLATE=y
CONFIG_IMA_DEFAULT_TEMPLATE="ima-sig"
CONFIG_IMA_DEFAULT_HASH_SHA1=y
# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set
# CONFIG_IMA_DEFAULT_HASH_SHA512 is not set
# CONFIG_IMA_DEFAULT_HASH_WP512 is not set
# CONFIG_IMA_DEFAULT_HASH_SM3 is not set
CONFIG_IMA_DEFAULT_HASH="sha1"
# CONFIG_IMA_WRITE_POLICY is not set
CONFIG_IMA_READ_POLICY=y
# CONFIG_IMA_APPRAISE is not set
CONFIG_IMA_ARCH_POLICY=y
CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y
CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y
CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT=y
# CONFIG_IMA_DISABLE_HTABLE is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_TOMOYO=y
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,tomoyo,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_BARE=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
# CONFIG_INIT_STACK_ALL_PATTERN is not set
CONFIG_INIT_STACK_ALL_ZERO=y
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
CONFIG_INIT_ON_FREE_DEFAULT_ON=y
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_FIPS_NAME="Linux Kernel Cryptographic API"
# CONFIG_CRYPTO_FIPS_CUSTOM_VERSION is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=y
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=y
CONFIG_CRYPTO_CRYPTD=y
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
CONFIG_CRYPTO_DH_RFC7919_GROUPS=y
CONFIG_CRYPTO_ECC=y
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_ECDSA=y
# CONFIG_CRYPTO_ECRDSA is not set
CONFIG_CRYPTO_SM2=y
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_ARIA=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_BLOWFISH_COMMON=y
# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST_COMMON=m
# CONFIG_CRYPTO_CAST5 is not set
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_SM4=m
CONFIG_CRYPTO_SM4_GENERIC=m
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
CONFIG_CRYPTO_CHACHA20=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CFB=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_HCTR2 is not set
CONFIG_CRYPTO_KEYWRAP=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_OFB=y
CONFIG_CRYPTO_PCBC=y
# CONFIG_CRYPTO_XTS is not set
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
CONFIG_CRYPTO_AEGIS128=y
CONFIG_CRYPTO_CHACHA20POLY1305=y
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_ECHAINIV=y
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=m
CONFIG_CRYPTO_CMAC=y
CONFIG_CRYPTO_GHASH=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_POLY1305=y
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
# CONFIG_CRYPTO_SHA3 is not set
CONFIG_CRYPTO_SM3=y
CONFIG_CRYPTO_SM3_GENERIC=y
CONFIG_CRYPTO_STREEBOG=m
# CONFIG_CRYPTO_VMAC is not set
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_XXHASH=m
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=y
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=m
# end of Compression

#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_JITTERENTROPY=y
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
# CONFIG_CRYPTO_USER_API_HASH is not set
CONFIG_CRYPTO_USER_API_SKCIPHER=y
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y

#
# Accelerated Cryptographic Algorithms for CPU (s390)
#
# CONFIG_CRYPTO_CRC32_S390 is not set
CONFIG_CRYPTO_SHA512_S390=m
CONFIG_CRYPTO_SHA1_S390=m
CONFIG_CRYPTO_SHA256_S390=y
CONFIG_CRYPTO_SHA3_256_S390=m
CONFIG_CRYPTO_SHA3_512_S390=y
CONFIG_CRYPTO_GHASH_S390=y
CONFIG_CRYPTO_AES_S390=m
CONFIG_CRYPTO_DES_S390=y
CONFIG_CRYPTO_CHACHA_S390=y
# end of Accelerated Cryptographic Algorithms for CPU (s390)

# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=y
CONFIG_PKCS7_MESSAGE_PARSER=y
CONFIG_PKCS7_TEST_KEY=m
CONFIG_SIGNED_PE_FILE_VERIFICATION=y
CONFIG_FIPS_SIGNATURE_SELFTEST=y

#
# Certificates for signature checking
#
CONFIG_MODULE_SIG_KEY="certs/signing_key.pem"
# CONFIG_MODULE_SIG_KEY_TYPE_RSA is not set
CONFIG_MODULE_SIG_KEY_TYPE_ECDSA=y
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
# CONFIG_RAID6_PQ_BENCHMARK is not set
CONFIG_LINEAR_RANGES=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=y
CONFIG_CRYPTO_LIB_CURVE25519=y
CONFIG_CRYPTO_LIB_DES=y
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=y
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
# CONFIG_CRC32_SLICEBY8 is not set
CONFIG_CRC32_SLICEBY4=y
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
CONFIG_CRC4=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_CRC8=y
CONFIG_XXHASH=y
CONFIG_RANDOM32_SELFTEST=y
CONFIG_842_COMPRESS=m
CONFIG_842_DECOMPRESS=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_ZLIB_DFLTCC=y
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_COMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=m
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_MICROLZMA=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_XZ_DEC_TEST=m
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DMA_DECLARE_COHERENT=y
CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_RESTRICTED_POOL is not set
CONFIG_DMA_API_DEBUG=y
CONFIG_DMA_API_DEBUG_SG=y
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
# CONFIG_FORCE_NR_CPUS is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_SIGNATURE=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_SG_POOL=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_STACKDEPOT_ALWAYS_INIT=y
CONFIG_REF_TRACKER=y
CONFIG_SBITMAP=y
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
CONFIG_PRINTK_CALLER=y
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DYNAMIC_DEBUG_CORE=y
# CONFIG_SYMBOLIC_ERRNAME is not set
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
CONFIG_DEBUG_INFO_COMPRESSED=y
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
CONFIG_GDB_SCRIPTS=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
CONFIG_READABLE_ASM=y
CONFIG_HEADERS_INSTALL=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_FS_ALLOW_ALL is not set
CONFIG_DEBUG_FS_DISALLOW_MOUNT=y
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
CONFIG_NET_NS_REFCNT_TRACKER=y
CONFIG_DEBUG_NET=y
# end of Networking Debugging

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_ARCH_HAS_DEBUG_WX=y
# CONFIG_DEBUG_WX is not set
CONFIG_GENERIC_PTDUMP=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
# CONFIG_DEBUG_OBJECTS_FREE is not set
CONFIG_DEBUG_OBJECTS_TIMERS=y
# CONFIG_DEBUG_OBJECTS_WORK is not set
# CONFIG_DEBUG_OBJECTS_RCU_HEAD is not set
# CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
# CONFIG_SHRINKER_DEBUG is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
CONFIG_DEBUG_VM_IRQSOFF=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_VM_MAPLE_TREE=y
# CONFIG_DEBUG_VM_RB is not set
CONFIG_DEBUG_VM_PGFLAGS=y
# CONFIG_DEBUG_VM_PGTABLE is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
CONFIG_KFENCE_DEFERRABLE=y
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
CONFIG_PANIC_ON_OOPS=y
CONFIG_PANIC_ON_OOPS_VALUE=1
CONFIG_PANIC_TIMEOUT=0
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# end of Scheduler Debugging

CONFIG_DEBUG_TIMEKEEPING=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
CONFIG_LOCKDEP_BITS=15
CONFIG_LOCKDEP_CHAINS_BITS=16
CONFIG_LOCKDEP_STACK_TRACE_BITS=19
CONFIG_LOCKDEP_STACK_TRACE_HASH_BITS=14
CONFIG_LOCKDEP_CIRCULAR_QUEUE_BITS=12
# CONFIG_DEBUG_LOCKDEP is not set
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# CONFIG_CSD_LOCK_WAIT_DEBUG is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
CONFIG_WARN_ALL_UNSEEDED_RANDOM=y
CONFIG_DEBUG_KOBJECT=y
# CONFIG_DEBUG_KOBJECT_RELEASE is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_PLIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_TORTURE_TEST=y
CONFIG_RCU_SCALE_TEST=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_TRACE=y
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_NOP_MCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y

#
# s390 Debugging
#
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_CIO_INJECT is not set
# end of s390 Debugging

#
# Kernel Testing and Coverage
#
CONFIG_KUNIT=m
# CONFIG_KUNIT_DEBUGFS is not set
CONFIG_KUNIT_TEST=m
CONFIG_KUNIT_EXAMPLE_TEST=m
CONFIG_KUNIT_ALL_TESTS=m
# CONFIG_KUNIT_DEFAULT_ENABLED is not set
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT=m
# CONFIG_NETDEV_NOTIFIER_ERROR_INJECT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
CONFIG_KCOV=y
CONFIG_KCOV_ENABLE_COMPARISONS=y
CONFIG_KCOV_INSTRUMENT_ALL=y
CONFIG_KCOV_IRQ_AREA_SIZE=0x40000
# CONFIG_RUNTIME_TESTING_MENU is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking