Re: [PATCH 04/13] clk: qcom: cpu-8996: support using GPLL0 as SMUX input

[Konrad Dybcio <konrad.dybcio@linaro.org>]

On 11.01.2023 22:52, Dmitry Baryshkov wrote:
> On 11/01/2023 22:59, Konrad Dybcio wrote:
>>
>>
>> On 11.01.2023 20:19, Dmitry Baryshkov wrote:
>>> In some cases the driver might need using GPLL0 to drive CPU clocks.
>>> Bring it in through the sys_apcs_aux clock.
>>>
>>> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>>> ---
>> Oh that's new.. downstream doesn't talk about this..
> 
> It does, but under the hood of the init procedure. See:
> 
>         /* Select GPLL0 for 300MHz for the perf cluster */
>         writel_relaxed(0xC, vbases[APC1_BASE] + MUX_OFFSET);
> 
Okay I see it now!

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> 
>>
>> Konrad
>>>   drivers/clk/qcom/clk-cpu-8996.c | 12 ++++++++++++
>>>   1 file changed, 12 insertions(+)
>>>
>>> diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
>>> index d51965fda56d..0e0c00d44c6f 100644
>>> --- a/drivers/clk/qcom/clk-cpu-8996.c
>>> +++ b/drivers/clk/qcom/clk-cpu-8996.c
>>> @@ -12,6 +12,8 @@
>>>    *                              +-------+
>>>    *               XO             |       |
>>>    *           +------------------>0      |
>>> + *               SYS_APCS_AUX   |       |
>>> + *           +------------------>3      |
>>>    *                              |       |
>>>    *                    PLL/2     | SMUX  +----+
>>>    *                      +------->1      |    |
>>> @@ -310,20 +312,29 @@ static const struct clk_ops clk_cpu_8996_pmux_ops = {
>>>       .determine_rate = clk_cpu_8996_pmux_determine_rate,
>>>   };
>>>   +static const struct parent_map smux_parent_map[] = {
>>> +    { .cfg = 0, }, /* xo */
>>> +    { .cfg = 1, }, /* pll */
>>> +    { .cfg = 3, }, /* sys_apcs_aux */
>>> +};
>>> +
>>>   static const struct clk_parent_data pwrcl_smux_parents[] = {
>>>       { .fw_name = "xo" },
>>>       { .hw = &pwrcl_pll_postdiv.hw },
>>> +    { .fw_name = "sys_apcs_aux" },
>>>   };
>>>     static const struct clk_parent_data perfcl_smux_parents[] = {
>>>       { .fw_name = "xo" },
>>>       { .hw = &perfcl_pll_postdiv.hw },
>>> +    { .fw_name = "sys_apcs_aux" },
>>>   };
>>>     static struct clk_regmap_mux pwrcl_smux = {
>>>       .reg = PWRCL_REG_OFFSET + MUX_OFFSET,
>>>       .shift = 2,
>>>       .width = 2,
>>> +    .parent_map = smux_parent_map,
>>>       .clkr.hw.init = &(struct clk_init_data) {
>>>           .name = "pwrcl_smux",
>>>           .parent_data = pwrcl_smux_parents,
>>> @@ -337,6 +348,7 @@ static struct clk_regmap_mux perfcl_smux = {
>>>       .reg = PERFCL_REG_OFFSET + MUX_OFFSET,
>>>       .shift = 2,
>>>       .width = 2,
>>> +    .parent_map = smux_parent_map,
>>>       .clkr.hw.init = &(struct clk_init_data) {
>>>           .name = "perfcl_smux",
>>>           .parent_data = perfcl_smux_parents,
>