[PATCH v13 0/2] Add support for IPQ5018 tsens

[PATCH v13 0/2] Add support for IPQ5018 tsens

[George Moussalem via B4 Relay]

IPQ5018 has tsens V1.0 IP with 5 sensors, of which 4 are in use,
and 1 interrupt. There is no RPM present in the soc to do tsens early
enable. Adding support for the same here.

Last patch series sent by Qualcomm dates back to Sep 22, 2023.
Since I'm working on OpenWrt support for IPQ5018 based boards (routers)
and Sricharan Ramabadhran <quic_srichara@quicinc.com> in below email
confirmed this SoC is still active, I'm continuing the efforts to send
patches upstream for Linux kernel support.
https://lore.kernel.org/all/63dc4054-b1e2-4e7a-94e7-643beb26a6f3@quicinc.com/

Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
Changes in v13:
- Dropped polling-delay-passive property as its value of 0 is the
  default value
- Updated hysterssis value to 1000 milicelsius in line with other boards
- Link to v12: https://lore.kernel.org/r/20250611-ipq5018-tsens-v12-0-a61374a5517d@outlook.com

Changes in v12:
- Updated description in dt bindings for IP v1 without RPM
- Added Fixes tag as this this version of tsens needs to be explicitly
  reset and enabled in the driver, introduced as part of:
  commit: 19f9b02ebc8f ("thermal/drivers/qcom/tsens: Add support for tsens v1 without RPM")
- Link to v11: https://lore.kernel.org/r/20250611-ipq5018-tsens-v11-0-266566bfd16a@outlook.com

Changes in v11:
- Dropped polling-delay property as its value of 0 is the default value
- Removed comments for TM and SROT in tsens node
- Replace underscore by hyphen in node name of top-glue-critical trip
- Added cooling device using CPU freq scaling making use of the passive
  trip defined under the CPU trips
- Make qcom,ipq5018-tsens a standalone compatible in the bindings as it
  should not use qcom,tsens-v1 as a fallback. This also fixes the issue
  reported by Rob's bot

Changes in v10:
- Rebased onto updated pull of master to resolve merge conflicts in the
  DTS patch
- Link to v9: https://lore.kernel.org/all/DS7PR19MB88836DC6965515E12D70BB2C9DCC2@DS7PR19MB8883.namprd19.prod.outlook.com/

Changes in v9:
- Updated checks in tsens to more strictly evaluate for v2+ upon enabling
  v2 features as suggsted by Dmitry.
- Split patch 3 into two, one to update conditional statements as
  mentioned above and the other to implement tsens IP v1 without RPM.
- Added back Dmitry's RB tag on patch 6 which wasn't carried over
  from v7 to v8
- Link to v8: https://lore.kernel.org/all/DS7PR19MB88833F7A9C8F4FC484977BA69DCD2@DS7PR19MB8883.namprd19.prod.outlook.com/

Changes in v8:
- Tsens V1 uses v1 interrupts and watchdog is not present (only on v2.3+).
  As such, replaced VER_1_X with VER_1_X_NO_RPM in conditons to ensure
  v1 interrupts are set and watchdog isn't enabled.
- Tested on Linksys MX2000 and SPNMX56
- Link to v7: https://lore.kernel.org/all/DS7PR19MB88831624F11516945C63400F9DC22@DS7PR19MB8883.namprd19.prod.outlook.com/

Changes in v7:
- Updated cover letter
- Replaced patch 3 with a new one to add support for tsens v1.0 with
  no RPM and removed Dmitry's 'Reviewed-by tag
- Refactored patch 4 and split support for IPQ5018 from support for
  tsens v1.0 without RPM. As such, also removed Dmitry's RB tag.
- Depends on patch 1 and 2 from patch series to add support for
  IQP5332 and IPQ5424 applied on Feb 11 2025:
  https://patchwork.kernel.org/project/linux-arm-msm/cover/20250210120436.821684-1-quic_mmanikan@quicinc.com/
- Link to v6: https://lore.kernel.org/all/DS7PR19MB88838833C0A3BFC3C7FC481F9DC02@DS7PR19MB8883.namprd19.prod.outlook.com/

Changes in v6:
- Include (this) cover letter
- Picked up Dmitry's Reviewed-by tag on patch 5
- Link to v5: https://lore.kernel.org/all/DS7PR19MB88832FDED68D3EBB0EE7E99F9DC72@DS7PR19MB8883.namprd19.prod.outlook.com/

Changes in v5:
- Adjusted commit messages to indicate IPQ5018 has 5 sensors of
  which 4 are described and in use as per downstream driver and dts.
- Padded addresses of tsens and qfprom nodes with leading zeros.
- Link to v4: https://lore.kernel.org/all/DS7PR19MB8883BE38C2B500D03213747A9DC72@DS7PR19MB8883.namprd19.prod.outlook.com/

Changes in v4:
- Documented ipq5018 in qcom,qfprom bindings
- Constrained ipq5018-tsens to one interrupt with description
- Added Rob's Acked-by tag
- Added Dmitry's Reviewed-by tag
- Fixed modpost warning: added __init to init_common
- Sorted tsens nodes by address
- Sorted thermal-zones nodes by name
- Link to v3: https://lore.kernel.org/all/20230922115116.2748804-1-srichara@win-platform-upstream01.qualcomm.com/

Changes in v3:
- Added the tsens-ipq5018 as  new binding without rpm
- Added Dmitry's Reviewed tag
- Fixed Dmitry's comments for error checks in init_ipq5018
- Ordered the qfprom device node properties
- Link to v2: https://lore.kernel.org/all/20230915121504.806672-1-quic_srichara@quicinc.com/

Changes in v2:
- Sorted the compatible and removed example
- Fixed the name for new tsens_feature
- Used tsend_calibrate_common instead of legacy
  and addressed comments from Dmitry.
- Squashed patch 3 & 4
- Fixed node names, order and added qfprom cells
  for points seprately
- Squashed patch 6 & 7
- Link to v1: https://lore.kernel.org/all/1693250307-8910-1-git-send-email-quic_srichara@quicinc.com/

---
George Moussalem (1):
      dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible

Sricharan Ramabadhran (1):
      arm64: dts: qcom: ipq5018: Add tsens node

 .../devicetree/bindings/thermal/qcom-tsens.yaml    |   7 +-
 arch/arm64/boot/dts/qcom/ipq5018.dtsi              | 178 +++++++++++++++++++++
 2 files changed, 184 insertions(+), 1 deletion(-)
---
base-commit: afc582fb6563b8eb5cd73f9eca52e55da827567f
change-id: 20250404-ipq5018-tsens-64bf95fd3317

Best regards,
-- 
George Moussalem <george.moussalem@outlook.com>

[PATCH v13 1/2] dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible

[George Moussalem via B4 Relay]

From: George Moussalem <george.moussalem@outlook.com>

IPQ5018 tsens should not use qcom,tsens-v1 as fallback since it has no RPM
and, as such, must deviates from the standard v1 init routine in the
driver as this version of tsens needs to be explicitly reset and enabled
in the driver.

So let's make qcom,ipq5018-tsens a standalone compatible in the bindings.

Fixes: 77c6d28192ef ("dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index 0e653bbe9884953b58c4d8569b8d096db47fd54f..3cf16f6734fcfee20735d3da2cfb0f708a11bca4 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -36,10 +36,15 @@ properties:
               - qcom,msm8974-tsens
           - const: qcom,tsens-v0_1
 
+      - description:
+          v1 of TSENS without RPM which requires to be explicitly reset
+          and enabled in the driver.
+        enum:
+          - qcom,ipq5018-tsens
+
       - description: v1 of TSENS
         items:
           - enum:
-              - qcom,ipq5018-tsens
               - qcom,msm8937-tsens
               - qcom,msm8956-tsens
               - qcom,msm8976-tsens

-- 
2.49.0

[PATCH v13 2/2] arm64: dts: qcom: ipq5018: Add tsens node

[George Moussalem via B4 Relay]

From: Sricharan Ramabadhran <quic_srichara@quicinc.com>

IPQ5018 has tsens V1.0 IP with 5 sensors, though 4 are in use.
There is no RPM, so tsens has to be manually enabled. Adding the tsens
and nvmem nodes and adding 4 thermal sensors (zones). The critical trip
temperature is set to 120'C with an action to reboot.

In addition, adding a cooling device to the CPU thermal zone which uses
CPU frequency scaling.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 178 ++++++++++++++++++++++++++++++++++
 1 file changed, 178 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 130360014c5e14c778e348d37e601f60325b0b14..1b33ccf1a1b1af721b9690ae2c35eb82985205f5 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
 #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -39,6 +40,7 @@ cpu0: cpu@0 {
 			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -49,6 +51,7 @@ cpu1: cpu@1 {
 			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		l2_0: l2-cache {
@@ -182,6 +185,117 @@ pcie0_phy: phy@86000 {
 			status = "disabled";
 		};
 
+		qfprom: qfprom@a0000 {
+			compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
+			reg = <0x000a0000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_mode: mode@249 {
+				reg = <0x249 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base1: base1@249 {
+				reg = <0x249 0x2>;
+				bits = <3 8>;
+			};
+
+			tsens_base2: base2@24a {
+				reg = <0x24a 0x2>;
+				bits = <3 8>;
+			};
+
+			tsens_s0_p1: s0-p1@24b {
+				reg = <0x24b 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s0_p2: s0-p2@24c {
+				reg = <0x24c 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@24c {
+				reg = <0x24c 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@24d {
+				reg = <0x24d 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@24e {
+				reg = <0x24e 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@24f {
+				reg = <0x24f 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@24f {
+				reg = <0x24f 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@250 {
+				reg = <0x250 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@251 {
+				reg = <0x251 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@254 {
+				reg = <0x254 0x1>;
+				bits = <0 6>;
+			};
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5018-tsens";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>,
+				      <&tsens_base2>,
+				      <&tsens_s0_p1>,
+				      <&tsens_s0_p2>,
+				      <&tsens_s1_p1>,
+				      <&tsens_s1_p2>,
+				      <&tsens_s2_p1>,
+				      <&tsens_s2_p2>,
+				      <&tsens_s3_p1>,
+				      <&tsens_s3_p2>,
+				      <&tsens_s4_p1>,
+				      <&tsens_s4_p2>;
+
+			nvmem-cell-names = "mode",
+					   "base1",
+					   "base2",
+					   "s0_p1",
+					   "s0_p2",
+					   "s1_p1",
+					   "s1_p2",
+					   "s2_p1",
+					   "s2_p2",
+					   "s3_p1",
+					   "s3_p2",
+					   "s4_p1",
+					   "s4_p2";
+
+			interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "uplow";
+			#qcom,sensors = <5>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -631,6 +745,70 @@ pcie@0 {
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_alert: cpu-passive {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gephy-thermal {
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				gephy-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				top-glue-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi32-thermal {
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				ubi32-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,

-- 
2.49.0

Re: [PATCH v13 1/2] dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible

[Krzysztof Kozlowski]

On Thu, Jun 12, 2025 at 10:46:13AM GMT, George Moussalem wrote:
> IPQ5018 tsens should not use qcom,tsens-v1 as fallback since it has no RPM
> and, as such, must deviates from the standard v1 init routine in the
> driver as this version of tsens needs to be explicitly reset and enabled
> in the driver.
> 
> So let's make qcom,ipq5018-tsens a standalone compatible in the bindings.
> 
> Fixes: 77c6d28192ef ("dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible")
> Signed-off-by: George Moussalem <george.moussalem@outlook.com>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

Re: [PATCH v13 2/2] arm64: dts: qcom: ipq5018: Add tsens node

[Konrad Dybcio]

On 6/12/25 8:46 AM, George Moussalem via B4 Relay wrote:
> From: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> 
> IPQ5018 has tsens V1.0 IP with 5 sensors, though 4 are in use.
> There is no RPM, so tsens has to be manually enabled. Adding the tsens
> and nvmem nodes and adding 4 thermal sensors (zones). The critical trip
> temperature is set to 120'C with an action to reboot.
> 
> In addition, adding a cooling device to the CPU thermal zone which uses
> CPU frequency scaling.
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> Signed-off-by: George Moussalem <george.moussalem@outlook.com>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>

Konrad

Re: [PATCH v13 0/2] Add support for IPQ5018 tsens

[Bjorn Andersson]

On Thu, 12 Jun 2025 10:46:12 +0400, George Moussalem wrote:
> IPQ5018 has tsens V1.0 IP with 5 sensors, of which 4 are in use,
> and 1 interrupt. There is no RPM present in the soc to do tsens early
> enable. Adding support for the same here.
> 
> Last patch series sent by Qualcomm dates back to Sep 22, 2023.
> Since I'm working on OpenWrt support for IPQ5018 based boards (routers)
> and Sricharan Ramabadhran <quic_srichara@quicinc.com> in below email
> confirmed this SoC is still active, I'm continuing the efforts to send
> patches upstream for Linux kernel support.
> https://lore.kernel.org/all/63dc4054-b1e2-4e7a-94e7-643beb26a6f3@quicinc.com/
> 
> [...]

Applied, thanks!

[1/2] dt-bindings: thermal: qcom-tsens: make ipq5018 tsens standalone compatible
      (no commit info)
[2/2] arm64: dts: qcom: ipq5018: Add tsens node
      commit: 450a80623e3b8bb5dae59e0d56046fc3d0a88f3b

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>