Re: [PATCH v2 1/2] dt-bindings: iio: magnetometer: add ti tmag5273 documentation file

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 21/11/2022 13:35, Gerald Loacker wrote:
> Add bindings for TI TMAG5273.
> 
> Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net>
> ---
> Changes in v2:
>  - Removed nodename
>  - Changed angle-enable to angle-measurement and used strings
>  - Added interrupts
>  - Removed vcc-supply from required properties
>  - Changed i2c-0 to i2c in examples
>  .../iio/magnetometer/ti,tmag5273.yaml         | 75 +++++++++++++++++++
>  MAINTAINERS                                   |  6 ++
>  2 files changed, 81 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
> new file mode 100644
> index 000000000000..b2ecd7054a34
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/magnetometer/ti,tmag5273.yaml
> @@ -0,0 +1,75 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor
> +
> +maintainers:
> +  - Gerald Loacker <gerald.loacker@wolfvision.net>
> +
> +description:
> +  The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device
> +  integrates three independent Hall-effect sensors in the X, Y, and Z axes.
> +  The device has an integrated temperature sensor available. The TMAG5273
> +  can be configured through the I2C interface to enable any combination of
> +  magnetic axes and temperature measurements. An integrated angle calculation
> +  engine (CORDIC) provides full 360° angular position information for both
> +  on-axis and off-axis angle measurement topologies. The angle calculation is
> +  performed using two user-selected magnetic axes.
> +
> +properties:
> +  compatible:
> +    const: ti,tmag5273
> +
> +  reg:
> +    maxItems: 1
> +
> +  "#io-channel-cells":
> +    const: 1
> +
> +  ti,angle-measurement:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description:
> +      Enables angle measurement in the selected plane.
> +      If not specified, "x-y" will be anables as default.
> +    enum:
> +      - "off"
> +      - "x-y"
> +      - "y-z"
> +      - "x-z"

Drop quotes from all these.

With this:

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof