From: Vikram Sharma <vikram.sharma@oss.qualcomm.com>
To: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>,
Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 1/3] dt-bindings: media: Add bindings for qcom,x1p42100-camss
Date: Wed, 13 May 2026 16:19:55 +0530 [thread overview]
Message-ID: <c3aa11e3-21c8-4150-918b-67e300c55ccc@oss.qualcomm.com> (raw)
In-Reply-To: <20260511-purwa_camss-v2-1-22608ab9126c@oss.qualcomm.com>
On 5/11/2026 2:29 PM, Wenmeng Liu wrote:
> Add bindings for the Camera Subsystem for X1P42100.
>
> The X1P42100 platform provides:
> - 2 x CSIPHY
> - 3 x TPG
> - 3 x CSID
> - 2 x CSID Lite
> - 1 x IFE
> - 2 x IFE Lite
>
> Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
> ---
> .../bindings/media/qcom,x1p42100-camss.yaml | 352 +++++++++++++++++++++
> 1 file changed, 352 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/qcom,x1p42100-camss.yaml b/Documentation/devicetree/bindings/media/qcom,x1p42100-camss.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..757eaaa0359e724b141863a50d1d8d0b81749bb7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/qcom,x1p42100-camss.yaml
> @@ -0,0 +1,352 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/qcom,x1p42100-camss.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm X1P42100 Camera Subsystem (CAMSS)
> +
> +maintainers:
> + - Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
> +
> +description:
> + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms.
> +
> +properties:
> + compatible:
> + const: qcom,x1p42100-camss
> +
> + reg:
> + maxItems: 14
> +
> + reg-names:
> + items:
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid_lite0
> + - const: csid_lite1
> + - const: csid_wrapper
> + - const: csiphy0
> + - const: csiphy4
> + - const: csitpg0
> + - const: csitpg1
> + - const: csitpg2
> + - const: vfe0
> + - const: vfe_lite0
> + - const: vfe_lite1
> +
> + '#address-cells':
> + const: 2
> +
> + '#size-cells':
> + const: 2
> +
> + ranges: true
> +
> + clocks:
> + maxItems: 21
> +
> + clock-names:
> + items:
> + - const: camnoc_nrt_axi
> + - const: camnoc_rt_axi
> + - const: core_ahb
> + - const: cpas_ahb
> + - const: cpas_fast_ahb
> + - const: cpas_vfe0
> + - const: cpas_vfe_lite
> + - const: csid
> + - const: csid_csiphy_rx
> + - const: csiphy0
> + - const: csiphy0_timer
> + - const: csiphy4
> + - const: csiphy4_timer
> + - const: gcc_axi_hf
> + - const: gcc_axi_sf
> + - const: vfe0
> + - const: vfe0_fast_ahb
> + - const: vfe_lite
> + - const: vfe_lite_ahb
> + - const: vfe_lite_cphy_rx
> + - const: vfe_lite_csid
> +
> + interrupts:
> + maxItems: 10
> +
> + interrupt-names:
> + items:
> + - const: csid0
> + - const: csid1
> + - const: csid2
> + - const: csid_lite0
> + - const: csid_lite1
> + - const: csiphy0
> + - const: csiphy4
> + - const: vfe0
> + - const: vfe_lite0
> + - const: vfe_lite1
> +
> + interconnects:
> + maxItems: 4
> +
> + interconnect-names:
> + items:
> + - const: ahb
> + - const: hf_mnoc
> + - const: sf_mnoc
> + - const: sf_icp_mnoc
> +
> + iommus:
> + oneOf:
> + - items:
> + - description: S1 HLOS IFE and IFE_LITE non-protected read
> + - description: S1 HLOS IFE and IFE_LITE non-protected write
> + - description: S1 HLOS SFE non-protected read
> + - description: S1 HLOS SFE non-protected write
> + - description: S1 HLOS CDM IFE non-protected
> + - description: Legacy slot 0 - do not use
> + - description: Legacy slot 1 - do not use
> + - description: Legacy slot 2 - do not use
> + - items:
> + - description: S1 HLOS IFE and IFE_LITE non-protected read
> + - description: S1 HLOS IFE and IFE_LITE non-protected write
> + - description: S1 HLOS SFE non-protected read
> + - description: S1 HLOS SFE non-protected write
> + - description: S1 HLOS CDM IFE non-protected
> +
> + power-domains:
> + items:
> + - description: IFE0 GDSC - Image Front End, Global Distributed Switch Controller.
> + - description: Titan Top GDSC - Titan ISP Block, Global Distributed Switch Controller.
> +
> + power-domain-names:
> + items:
> + - const: ife0
> + - const: top
> +
> + vdd-csiphy-0p8-supply:
> + description:
> + 0.8V supply to a PHY.
> +
> + vdd-csiphy-1p2-supply:
> + description:
> + 1.2V supply to a PHY.
> +
> + phys:
> + maxItems: 2
> +
> + phy-names:
> + items:
> + - const: csiphy0
> + - const: csiphy4
> +
> + ports:
> + $ref: /schemas/graph.yaml#/properties/ports
> +
> + description:
> + CSI input ports.
> +
> + patternProperties:
> + "^port@[0-1]$":
> + $ref: /schemas/graph.yaml#/$defs/port-base
> + unevaluatedProperties: false
> +
> + description:
> + Input port for receiving CSI data.
> +
> + properties:
> + endpoint:
> + $ref: video-interfaces.yaml#
> + unevaluatedProperties: false
> +
> + properties:
> + data-lanes:
> + minItems: 1
> + maxItems: 4
> +
> + bus-type:
> + enum:
> + - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
> + - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
> +
> + required:
> + - data-lanes
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - interrupts
> + - interrupt-names
> + - interconnects
> + - interconnect-names
> + - iommus
> + - power-domains
> + - power-domain-names
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
> + #include <dt-bindings/clock/qcom,x1e80100-camcc.h>
> + #include <dt-bindings/interconnect/qcom,icc.h>
> + #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
> + #include <dt-bindings/phy/phy.h>
> + #include <dt-bindings/power/qcom-rpmpd.h>
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + camss: isp@acb7000 {
> + compatible = "qcom,x1p42100-camss";
> +
> + reg = <0 0x0acb7000 0 0x2000>,
> + <0 0x0acb9000 0 0x2000>,
> + <0 0x0acbb000 0 0x2000>,
> + <0 0x0acc6000 0 0x1000>,
> + <0 0x0acca000 0 0x1000>,
> + <0 0x0acb6000 0 0x1000>,
> + <0 0x0ace4000 0 0x1000>,
> + <0 0x0acec000 0 0x4000>,
> + <0 0x0acf6000 0 0x1000>,
> + <0 0x0acf7000 0 0x1000>,
> + <0 0x0acf8000 0 0x1000>,
> + <0 0x0ac62000 0 0xf000>,
> + <0 0x0acc7000 0 0x2000>,
> + <0 0x0accb000 0 0x2000>;
> +
> + reg-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid_lite0",
> + "csid_lite1",
> + "csid_wrapper",
> + "csiphy0",
> + "csiphy4",
> + "csitpg0",
> + "csitpg1",
> + "csitpg2",
> + "vfe0",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clocks = <&camcc CAM_CC_CAMNOC_AXI_NRT_CLK>,
> + <&camcc CAM_CC_CAMNOC_AXI_RT_CLK>,
> + <&camcc CAM_CC_CORE_AHB_CLK>,
> + <&camcc CAM_CC_CPAS_AHB_CLK>,
> + <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
> + <&camcc CAM_CC_CPAS_IFE_0_CLK>,
> + <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
> + <&camcc CAM_CC_CSID_CLK>,
> + <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
> + <&camcc CAM_CC_CSIPHY0_CLK>,
> + <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
> + <&camcc CAM_CC_CSIPHY4_CLK>,
> + <&camcc CAM_CC_CSI4PHYTIMER_CLK>,
> + <&gcc GCC_CAMERA_HF_AXI_CLK>,
> + <&gcc GCC_CAMERA_SF_AXI_CLK>,
> + <&camcc CAM_CC_IFE_0_CLK>,
> + <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CLK>,
> + <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
> + <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
> +
> + clock-names = "camnoc_nrt_axi",
> + "camnoc_rt_axi",
> + "core_ahb",
> + "cpas_ahb",
> + "cpas_fast_ahb",
> + "cpas_vfe0",
> + "cpas_vfe_lite",
> + "csid",
> + "csid_csiphy_rx",
> + "csiphy0",
> + "csiphy0_timer",
> + "csiphy4",
> + "csiphy4_timer",
> + "gcc_axi_hf",
> + "gcc_axi_sf",
> + "vfe0",
> + "vfe0_fast_ahb",
> + "vfe_lite",
> + "vfe_lite_ahb",
> + "vfe_lite_cphy_rx",
> + "vfe_lite_csid";
> +
> + interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
> + <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
> +
> + interrupt-names = "csid0",
> + "csid1",
> + "csid2",
> + "csid_lite0",
> + "csid_lite1",
> + "csiphy0",
> + "csiphy4",
> + "vfe0",
> + "vfe_lite0",
> + "vfe_lite1";
> +
> + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> + &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
> + <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> + <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
> + <&mmss_noc MASTER_CAMNOC_ICP QCOM_ICC_TAG_ALWAYS
> + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> +
> + interconnect-names = "ahb",
> + "hf_mnoc",
> + "sf_mnoc",
> + "sf_icp_mnoc";
Is sf path required for isp?
> +
> + iommus = <&apps_smmu 0x800 0x60>, //S1 HLOS IFE and IFE_LITE non-protected read
> + <&apps_smmu 0x820 0x60>, //S1 HLOS IFE and IFE_LITE non-protected write
> + <&apps_smmu 0x840 0x60>, //S1 HLOS SFE non-protected read
Comments should be kept to description part
> + <&apps_smmu 0x860 0x60>, //S1 HLOS SFE non-protected write
> + <&apps_smmu 0x18a0 0x0>; //S1 HLOS CDM IFE non-protected
> +
> + power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
> + <&camcc CAM_CC_TITAN_TOP_GDSC>;
> +
> + power-domain-names = "ife0",
> + "top";
> +
> + vdd-csiphy-0p8-supply = <&csiphy_0p8_supply>;
> + vdd-csiphy-1p2-supply = <&csiphy_1p2_supply>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + csiphy_ep0: endpoint {
> + data-lanes = <0 1>;
> + remote-endpoint = <&sensor_ep>;
> + };
> + };
> + };
> + };
> + };
>
>
next prev parent reply other threads:[~2026-05-13 10:50 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-11 8:59 [PATCH v2 0/3] media: camss: add support for purwa platform Wenmeng Liu
2026-05-11 8:59 ` [PATCH v2 1/3] dt-bindings: media: Add bindings for qcom,x1p42100-camss Wenmeng Liu
2026-05-13 10:49 ` Vikram Sharma [this message]
2026-05-11 8:59 ` [PATCH v2 2/3] media: qcom: camss: add support for X1P42100 camss Wenmeng Liu
2026-05-11 8:59 ` [PATCH v2 3/3] arm64: dts: qcom: purwa: Add camss node Wenmeng Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c3aa11e3-21c8-4150-918b-67e300c55ccc@oss.qualcomm.com \
--to=vikram.sharma@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=todor.too@gmail.com \
--cc=vladimir.zapolskiy@linaro.org \
--cc=wenmeng.liu@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox