[PATCH v7 00/23] Add display driver for MT8188 VDOSYS1

[PATCH v7 00/23] Add display driver for MT8188 VDOSYS1

[Hsiao Chien Sung]

Changes in v7:
- Start/Stop the components in OVL Adaptor with function pointers
- Refine Padding driver
- Fix underrun when the layer is switching off

Changes in v6:
- Separate the commits into smaller ones
- Add DPI input mode setting
- Fix VDOSYS1 power-on issues

Changes in v5:
- Reuse .clk_enable/.clk_disable in struct mtk_ddp_comp_funcs
  in mtk_disp_ovl_adaptor.c
- Adjust commits order

Changes in v4:
- Add new functions in mtk_disp_ovl_adaptor.c to enable/disable
  components and reuse them when clock enable/disable
- Rename components in mtk_disp_ovl_adaptor.c and sort them in
  alphabetical order

Changes in v3:
- Define macro MMSYS_RST_NR in mtk-mmsys.h and update reset table
- Fix typos (ETDHR -> ETHDR, VSNYC -> VSYNC)
- Rebase dt-bindings on linux-next
- Refine description of Padding
- Squash reset bit map commits for VDO0 and VDO1 into one

Changes in v2:
- Remove redundant compatibles of MT8188 because it shares the same
  configuration with MT8195
- Separate dt-bindings by modules
- Support reset bit mapping in mmsys driver

Hsiao Chien Sung (23):
  dt-bindings: display: mediatek: ethdr: Add compatible for MT8188
  dt-bindings: display: mediatek: mdp-rdma: Add compatible for MT8188
  dt-bindings: display: mediatek: merge: Add compatible for MT8188
  dt-bindings: display: mediatek: padding: Add MT8188
  dt-bindings: arm: mediatek: Add compatible for MT8188
  dt-bindings: reset: mt8188: Add VDOSYS reset control bits
  soc: mediatek: Support MT8188 VDOSYS1 in mtk-mmsys
  soc: mediatek: Support MT8188 VDOSYS1 Padding in mtk-mmsys
  soc: mediatek: Support reset bit mapping in mmsys driver
  soc: mediatek: Add MT8188 VDOSYS reset bit map
  drm/mediatek: Rename OVL_ADAPTOR_TYPE_RDMA
  drm/mediatek: Refine device table of OVL adaptor
  drm/mediatek: Sort OVL adaptor components
  drm/mediatek: Add component ID to component match structure
  drm/mediatek: Manage component's clock with function pointers
  drm/mediatek: Start/Stop components with function pointers
  drm/mediatek: Support MT8188 Padding in display driver
  drm/mediatek: Add Padding to OVL adaptor
  drm/mediatek: Return error if MDP RDMA failed to enable the clock
  drm/mediatek: Remove the redundant driver data for DPI
  drm/mediatek: Fix underrun in VDO1 when switches off the layer
  drm/mediatek: Power on devices in OVL adaptor when atomic enable
  drm/mediatek: Support MT8188 VDOSYS1 in display driver

 .../bindings/arm/mediatek/mediatek,mmsys.yaml |   1 +
 .../display/mediatek/mediatek,ethdr.yaml      |   6 +-
 .../display/mediatek/mediatek,mdp-rdma.yaml   |   6 +-
 .../display/mediatek/mediatek,merge.yaml      |   3 +
 .../display/mediatek/mediatek,padding.yaml    |  81 ++++++
 drivers/gpu/drm/mediatek/Makefile             |   3 +-
 drivers/gpu/drm/mediatek/mtk_disp_drv.h       |   7 +
 drivers/gpu/drm/mediatek/mtk_disp_merge.c     |   2 +-
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 266 +++++++++++-------
 drivers/gpu/drm/mediatek/mtk_dpi.c            |  16 +-
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       |   9 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   |   1 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |   9 +
 drivers/gpu/drm/mediatek/mtk_drm_drv.c        |   4 +
 drivers/gpu/drm/mediatek/mtk_drm_drv.h        |   2 +-
 drivers/gpu/drm/mediatek/mtk_mdp_rdma.c       |   3 +-
 drivers/gpu/drm/mediatek/mtk_padding.c        | 206 ++++++++++++++
 drivers/soc/mediatek/mt8188-mmsys.h           | 210 ++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.c              |  27 ++
 drivers/soc/mediatek/mtk-mmsys.h              |  32 +++
 drivers/soc/mediatek/mtk-mutex.c              |  51 ++++
 include/dt-bindings/reset/mt8188-resets.h     |  75 +++++
 include/linux/soc/mediatek/mtk-mmsys.h        |   8 +
 23 files changed, 899 insertions(+), 129 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
 create mode 100644 drivers/gpu/drm/mediatek/mtk_padding.c

--
2.18.0

[PATCH v7 01/23] dt-bindings: display: mediatek: ethdr: Add compatible for MT8188

[Hsiao Chien Sung]

Add compatible name for MediaTek MT8188 ETHDR.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../bindings/display/mediatek/mediatek,ethdr.yaml           | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
index 801fa66ae615..677882348ede 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml
@@ -23,7 +23,11 @@ description:
 
 properties:
   compatible:
-    const: mediatek,mt8195-disp-ethdr
+    oneOf:
+      - const: mediatek,mt8195-disp-ethdr
+      - items:
+          - const: mediatek,mt8188-disp-ethdr
+          - const: mediatek,mt8195-disp-ethdr
 
   reg:
     maxItems: 7
-- 
2.18.0

[PATCH v7 02/23] dt-bindings: display: mediatek: mdp-rdma: Add compatible for MT8188

[Hsiao Chien Sung]

Add compatible name for MediaTek MT8188 MDP-RDMA.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../bindings/display/mediatek/mediatek,mdp-rdma.yaml        | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
index dd12e2ff685c..7570a0684967 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml
@@ -21,7 +21,11 @@ description:
 
 properties:
   compatible:
-    const: mediatek,mt8195-vdo1-rdma
+    oneOf:
+      - const: mediatek,mt8195-vdo1-rdma
+      - items:
+          - const: mediatek,mt8188-vdo1-rdma
+          - const: mediatek,mt8195-vdo1-rdma
 
   reg:
     maxItems: 1
-- 
2.18.0

[PATCH v7 03/23] dt-bindings: display: mediatek: merge: Add compatible for MT8188

[Hsiao Chien Sung]

Add compatible name for MediaTek MT8188 MERGE.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../devicetree/bindings/display/mediatek/mediatek,merge.yaml   | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
index eead5cb8636e..5c678695162e 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
@@ -27,6 +27,9 @@ properties:
       - items:
           - const: mediatek,mt6795-disp-merge
           - const: mediatek,mt8173-disp-merge
+      - items:
+          - const: mediatek,mt8188-disp-merge
+          - const: mediatek,mt8195-disp-merge
 
   reg:
     maxItems: 1
-- 
2.18.0

[PATCH v7 04/23] dt-bindings: display: mediatek: padding: Add MT8188

[Hsiao Chien Sung]

Padding is a new hardware module on MediaTek MT8188,
add dt-bindings for it.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../display/mediatek/mediatek,padding.yaml    | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
new file mode 100644
index 000000000000..db24801ebc48
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml
@@ -0,0 +1,81 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Display Padding
+
+maintainers:
+  - Chun-Kuang Hu <chunkuang.hu@kernel.org>
+  - Philipp Zabel <p.zabel@pengutronix.de>
+
+description:
+  Padding provides ability to add pixels to width and height of a layer with
+  specified colors. Due to hardware design, Mixer in VDOSYS1 requires
+  width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
+  we need Padding to deal with odd width.
+  Please notice that even if the Padding is in bypass mode, settings in
+  register must be cleared to 0, or undefined behaviors could happen.
+
+properties:
+  compatible:
+    const: mediatek,mt8188-padding
+
+  reg:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: RDMA Clock
+
+  mediatek,gce-client-reg:
+    description:
+      GCE (Global Command Engine) is a multi-core micro processor that helps
+      its clients to execute commands without interrupting CPU. This property
+      describes GCE client's information that is composed by 4 fields.
+      1. Phandle of the GCE (there may be several GCE processors)
+      2. Sub-system ID defined in the dt-binding like a user ID
+         (Please refer to include/dt-bindings/gce/<chip>-gce.h)
+      3. Offset from base address of the subsys you are at
+      4. Size of the register the client needs
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      items:
+        - description: Phandle of the GCE
+        - description: Subsys ID defined in the dt-binding
+        - description: Offset from base address of the subsys
+        - description: Size of register
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-domains
+  - clocks
+  - mediatek,gce-client-reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/mediatek,mt8188-clk.h>
+    #include <dt-bindings/power/mediatek,mt8188-power.h>
+    #include <dt-bindings/gce/mt8195-gce.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        padding0: padding@1c11d000 {
+            compatible = "mediatek,mt8188-padding";
+            reg = <0 0x1c11d000 0 0x1000>;
+            clocks = <&vdosys1 CLK_VDO1_PADDING0>;
+            power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>;
+            mediatek,gce-client-reg = <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>;
+        };
+    };
-- 
2.18.0

Re: [PATCH v7 04/23] dt-bindings: display: mediatek: padding: Add MT8188

[Daniel Stone]

Hi Shawn,

On Fri, 6 Oct 2023 at 08:38, Hsiao Chien Sung <shawn.sung@mediatek.com> wrote:
> +  Padding provides ability to add pixels to width and height of a layer with
> +  specified colors. Due to hardware design, Mixer in VDOSYS1 requires
> +  width of a layer to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
> +  we need Padding to deal with odd width.
> +  Please notice that even if the Padding is in bypass mode, settings in
> +  register must be cleared to 0, or undefined behaviors could happen.

If I understand the driver correctly, padding is automatically applied
to compensate for unaligned dimensions. The first/last rows/columns of
the overlay area will be filled with a specified colour (black?) to
preserve the area. This is unfortunately not OK to do transparently.
Userspace must be aware of this policy decision and specifically
request it. If not, the atomic request check should fail and tell
userspace that the requested configuration is not possible to achieve.

Cheers,
Daniel

Re: [PATCH v7 04/23] dt-bindings: display: mediatek: padding: Add MT8188

[Shawn Sung (宋孝謙)]

Hi Daniel,

On Fri, 2023-10-13 at 17:26 +0100, Daniel Stone wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  Hi Shawn,
> 
> On Fri, 6 Oct 2023 at 08:38, Hsiao Chien Sung <
> shawn.sung@mediatek.com> wrote:
> > +  Padding provides ability to add pixels to width and height of a
> layer with
> > +  specified colors. Due to hardware design, Mixer in VDOSYS1
> requires
> > +  width of a layer to be 2-pixel-align, or 4-pixel-align when
> ETHDR is enabled,
> > +  we need Padding to deal with odd width.
> > +  Please notice that even if the Padding is in bypass mode,
> settings in
> > +  register must be cleared to 0, or undefined behaviors could
> happen.
> 
> If I understand the driver correctly, padding is automatically
> applied
> to compensate for unaligned dimensions. The first/last rows/columns
> of
> the overlay area will be filled with a specified colour (black?) to
> preserve the area. This is unfortunately not OK to do transparently.
> Userspace must be aware of this policy decision and specifically
> request it. If not, the atomic request check should fail and tell
> userspace that the requested configuration is not possible to
> achieve.
> 
> Cheers,
> Daniel

Yes, Padding works as you described, users can assign background colors
for the filled area in 10bit RGB format, however, the rows and columns
that are filled by Padding will be cropped by the hardware components
after it to avoid situations as you mentioned, so users should not
notice any difference.

The reason why we add paddings to the frame and then remove it before
showing it on the screen is due to the limitation of ETHDR. When HDR is
enabled, the input pixels in width must be 4-pixel aligned, but for now
ETHDR is bypassed so as the Paddings.

Since the Paddings are always bypassed currently, the logics described
above are not implemented yet, mtk_padding_config() will also be
removed in the next version as the reviewer's suggestion.

Cheers,
Shawn

Re: [PATCH v7 04/23] dt-bindings: display: mediatek: padding: Add MT8188

[Daniel Stone]

Hi Shawn,

On Mon, 16 Oct 2023 at 06:23, Shawn Sung (宋孝謙) <Shawn.Sung@mediatek.com> wrote:
> On Fri, 2023-10-13 at 17:26 +0100, Daniel Stone wrote:
> > If I understand the driver correctly, padding is automatically
> > applied
> > to compensate for unaligned dimensions. The first/last rows/columns
> > of
> > the overlay area will be filled with a specified colour (black?) to
> > preserve the area. This is unfortunately not OK to do transparently.
> > Userspace must be aware of this policy decision and specifically
> > request it. If not, the atomic request check should fail and tell
> > userspace that the requested configuration is not possible to
> > achieve.
>
> Yes, Padding works as you described, users can assign background colors
> for the filled area in 10bit RGB format, however, the rows and columns
> that are filled by Padding will be cropped by the hardware components
> after it to avoid situations as you mentioned, so users should not
> notice any difference.

Thanks for the explanation, I hadn't realised that the added padding
later gets cropped.

Cheers,
Daniel

Re: [PATCH v7 04/23] dt-bindings: display: mediatek: padding: Add MT8188

[Shawn Sung (宋孝謙)]

Hi Daniel,

On Mon, 2023-10-16 at 12:47 +0200, Daniel Stone wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  Hi Shawn,
> 
> On Mon, 16 Oct 2023 at 06:23, Shawn Sung (宋孝謙) <
> Shawn.Sung@mediatek.com> wrote:
> > On Fri, 2023-10-13 at 17:26 +0100, Daniel Stone wrote:
> > > If I understand the driver correctly, padding is automatically
> > > applied
> > > to compensate for unaligned dimensions. The first/last
> rows/columns
> > > of
> > > the overlay area will be filled with a specified colour (black?)
> to
> > > preserve the area. This is unfortunately not OK to do
> transparently.
> > > Userspace must be aware of this policy decision and specifically
> > > request it. If not, the atomic request check should fail and tell
> > > userspace that the requested configuration is not possible to
> > > achieve.
> >
> > Yes, Padding works as you described, users can assign background
> colors
> > for the filled area in 10bit RGB format, however, the rows and
> columns
> > that are filled by Padding will be cropped by the hardware
> components
> > after it to avoid situations as you mentioned, so users should not
> > notice any difference.
> 
> Thanks for the explanation, I hadn't realised that the added padding
> later gets cropped.
> 
> Cheers,
> Daniel

Since Padding is bypassed in the current version, we didn't mention too
many details about it. Thank you for checking.

For more information, 4-pixel alignment in width is only required when
HDR is in Dolby Vision format, and the paddings will be cropped by
video front-end in the HDR module.

Cheers,
Shawn

[PATCH v7 05/23] dt-bindings: arm: mediatek: Add compatible for MT8188

[Hsiao Chien Sung]

Add compatible name for MediaTek MT8188 VDOSYS1.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml         | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
index 536f5a5ebd24..642fa2e4736e 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
@@ -32,6 +32,7 @@ properties:
               - mediatek,mt8183-mmsys
               - mediatek,mt8186-mmsys
               - mediatek,mt8188-vdosys0
+              - mediatek,mt8188-vdosys1
               - mediatek,mt8192-mmsys
               - mediatek,mt8195-vdosys1
               - mediatek,mt8195-vppsys0
-- 
2.18.0

[PATCH v7 06/23] dt-bindings: reset: mt8188: Add VDOSYS reset control bits

[Hsiao Chien Sung]

Add MT8188 VDOSYS0 and VDOSYS1 reset control bits.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 include/dt-bindings/reset/mt8188-resets.h | 75 +++++++++++++++++++++++
 1 file changed, 75 insertions(+)

diff --git a/include/dt-bindings/reset/mt8188-resets.h b/include/dt-bindings/reset/mt8188-resets.h
index ba9a5e9b8899..5a58c54e7d20 100644
--- a/include/dt-bindings/reset/mt8188-resets.h
+++ b/include/dt-bindings/reset/mt8188-resets.h
@@ -38,4 +38,79 @@
 #define MT8188_INFRA_RST1_THERMAL_CTRL_RST         1
 #define MT8188_INFRA_RST3_PTP_CTRL_RST             2
 
+#define MT8188_VDO0_RST_DISP_OVL0		0
+#define MT8188_VDO0_RST_FAKE_ENG0		1
+#define MT8188_VDO0_RST_DISP_CCORR0		2
+#define MT8188_VDO0_RST_DISP_MUTEX0		3
+#define MT8188_VDO0_RST_DISP_GAMMA0		4
+#define MT8188_VDO0_RST_DISP_DITHER0		5
+#define MT8188_VDO0_RST_DISP_WDMA0		6
+#define MT8188_VDO0_RST_DISP_RDMA0		7
+#define MT8188_VDO0_RST_DSI0			8
+#define MT8188_VDO0_RST_DSI1			9
+#define MT8188_VDO0_RST_DSC_WRAP0		10
+#define MT8188_VDO0_RST_VPP_MERGE0		11
+#define MT8188_VDO0_RST_DP_INTF0		12
+#define MT8188_VDO0_RST_DISP_AAL0		13
+#define MT8188_VDO0_RST_INLINEROT0		14
+#define MT8188_VDO0_RST_APB_BUS			15
+#define MT8188_VDO0_RST_DISP_COLOR0		16
+#define MT8188_VDO0_RST_MDP_WROT0		17
+#define MT8188_VDO0_RST_DISP_RSZ0		18
+
+#define MT8188_VDO1_RST_SMI_LARB2		0
+#define MT8188_VDO1_RST_SMI_LARB3		1
+#define MT8188_VDO1_RST_GALS			2
+#define MT8188_VDO1_RST_FAKE_ENG0		3
+#define MT8188_VDO1_RST_FAKE_ENG1		4
+#define MT8188_VDO1_RST_MDP_RDMA0		5
+#define MT8188_VDO1_RST_MDP_RDMA1		6
+#define MT8188_VDO1_RST_MDP_RDMA2		7
+#define MT8188_VDO1_RST_MDP_RDMA3		8
+#define MT8188_VDO1_RST_VPP_MERGE0		9
+#define MT8188_VDO1_RST_VPP_MERGE1		10
+#define MT8188_VDO1_RST_VPP_MERGE2		11
+#define MT8188_VDO1_RST_VPP_MERGE3		12
+#define MT8188_VDO1_RST_VPP_MERGE4		13
+#define MT8188_VDO1_RST_VPP2_TO_VDO1_DL_ASYNC	14
+#define MT8188_VDO1_RST_VPP3_TO_VDO1_DL_ASYNC	15
+#define MT8188_VDO1_RST_DISP_MUTEX		16
+#define MT8188_VDO1_RST_MDP_RDMA4		17
+#define MT8188_VDO1_RST_MDP_RDMA5		18
+#define MT8188_VDO1_RST_MDP_RDMA6		19
+#define MT8188_VDO1_RST_MDP_RDMA7		20
+#define MT8188_VDO1_RST_DP_INTF1_MMCK		21
+#define MT8188_VDO1_RST_DPI0_MM_CK		22
+#define MT8188_VDO1_RST_DPI1_MM_CK		23
+#define MT8188_VDO1_RST_MERGE0_DL_ASYNC		24
+#define MT8188_VDO1_RST_MERGE1_DL_ASYNC		25
+#define MT8188_VDO1_RST_MERGE2_DL_ASYNC		26
+#define MT8188_VDO1_RST_MERGE3_DL_ASYNC		27
+#define MT8188_VDO1_RST_MERGE4_DL_ASYNC		28
+#define MT8188_VDO1_RST_VDO0_DSC_TO_VDO1_DL_ASYNC	29
+#define MT8188_VDO1_RST_VDO0_MERGE_TO_VDO1_DL_ASYNC	30
+#define MT8188_VDO1_RST_PADDING0		31
+#define MT8188_VDO1_RST_PADDING1		32
+#define MT8188_VDO1_RST_PADDING2		33
+#define MT8188_VDO1_RST_PADDING3		34
+#define MT8188_VDO1_RST_PADDING4		35
+#define MT8188_VDO1_RST_PADDING5		36
+#define MT8188_VDO1_RST_PADDING6		37
+#define MT8188_VDO1_RST_PADDING7		38
+#define MT8188_VDO1_RST_DISP_RSZ0		39
+#define MT8188_VDO1_RST_DISP_RSZ1		40
+#define MT8188_VDO1_RST_DISP_RSZ2		41
+#define MT8188_VDO1_RST_DISP_RSZ3		42
+#define MT8188_VDO1_RST_HDR_VDO_FE0		43
+#define MT8188_VDO1_RST_HDR_GFX_FE0		44
+#define MT8188_VDO1_RST_HDR_VDO_BE		45
+#define MT8188_VDO1_RST_HDR_VDO_FE1		46
+#define MT8188_VDO1_RST_HDR_GFX_FE1		47
+#define MT8188_VDO1_RST_DISP_MIXER		48
+#define MT8188_VDO1_RST_HDR_VDO_FE0_DL_ASYNC	49
+#define MT8188_VDO1_RST_HDR_VDO_FE1_DL_ASYNC	50
+#define MT8188_VDO1_RST_HDR_GFX_FE0_DL_ASYNC	51
+#define MT8188_VDO1_RST_HDR_GFX_FE1_DL_ASYNC	52
+#define MT8188_VDO1_RST_HDR_VDO_BE_DL_ASYNC	53
+
 #endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT8188 */
-- 
2.18.0

[PATCH v7 07/23] soc: mediatek: Support MT8188 VDOSYS1 in mtk-mmsys

[Hsiao Chien Sung]

- Add register definitions for MT8188
- Add VDOSYS1 routing table
- Update MUTEX definitions accordingly
- Set VSYNC length from 0x40 (default) to 1 since ETHDR is bypassed

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/soc/mediatek/mt8188-mmsys.h | 126 ++++++++++++++++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.c    |  13 +++
 drivers/soc/mediatek/mtk-mmsys.h    |  29 +++++++
 drivers/soc/mediatek/mtk-mutex.c    |  35 ++++++++
 4 files changed, 203 insertions(+)

diff --git a/drivers/soc/mediatek/mt8188-mmsys.h b/drivers/soc/mediatek/mt8188-mmsys.h
index 448cc3761b43..a9490c3c4256 100644
--- a/drivers/soc/mediatek/mt8188-mmsys.h
+++ b/drivers/soc/mediatek/mt8188-mmsys.h
@@ -67,6 +67,56 @@
 #define MT8188_SOUT_DSC_WRAP0_OUT_TO_VPP_MERGE		BIT(18)
 #define MT8188_SOUT_DSC_WRAP0_OUT_TO_DISP_WDMA0		BIT(19)
 
+#define MT8188_VDO1_HDR_TOP_CFG					0xd00
+#define MT8188_VDO1_MIXER_IN1_ALPHA				0xd30
+#define MT8188_VDO1_MIXER_IN1_PAD				0xd40
+#define MT8188_VDO1_MIXER_VSYNC_LEN				0xd5c
+#define MT8188_VDO1_MERGE0_ASYNC_CFG_WD				0xe30
+#define MT8188_VDO1_HDRBE_ASYNC_CFG_WD				0xe70
+#define MT8188_VDO1_VPP_MERGE0_P0_SEL_IN			0xf04
+#define MT8188_VPP_MERGE0_P0_SEL_IN_FROM_MDP_RDMA0		1
+#define MT8188_VDO1_VPP_MERGE0_P1_SEL_IN			0xf08
+#define MT8188_VPP_MERGE0_P1_SEL_IN_FROM_MDP_RDMA1		1
+#define MT8188_VDO1_DISP_DPI1_SEL_IN				0xf10
+#define MT8188_DISP_DPI1_SEL_IN_FROM_VPP_MERGE4_MOUT		0
+#define MT8188_VDO1_DISP_DP_INTF0_SEL_IN			0xf14
+#define MT8188_DISP_DP_INTF0_SEL_IN_FROM_VPP_MERGE4_MOUT	0
+#define MT8188_VDO1_MERGE4_SOUT_SEL				0xf18
+#define MT8188_MERGE4_SOUT_TO_DPI1_SEL				BIT(2)
+#define MT8188_MERGE4_SOUT_TO_DP_INTF0_SEL			BIT(3)
+#define MT8188_VDO1_MIXER_IN1_SEL_IN				0xf24
+#define MT8188_MIXER_IN1_SEL_IN_FROM_MERGE0_ASYNC_SOUT		1
+#define MT8188_VDO1_MIXER_IN2_SEL_IN				0xf28
+#define MT8188_MIXER_IN2_SEL_IN_FROM_MERGE1_ASYNC_SOUT		1
+#define MT8188_VDO1_MIXER_IN3_SEL_IN				0xf2c
+#define MT8188_MIXER_IN3_SEL_IN_FROM_MERGE2_ASYNC_SOUT		1
+#define MT8188_VDO1_MIXER_IN4_SEL_IN				0xf30
+#define MT8188_MIXER_IN4_SEL_IN_FROM_MERGE3_ASYNC_SOUT		1
+#define MT8188_VDO1_MIXER_OUT_SOUT_SEL				0xf34
+#define MT8188_MIXER_SOUT_TO_MERGE4_ASYNC_SEL			1
+#define MT8188_VDO1_VPP_MERGE1_P0_SEL_IN			0xf3c
+#define MT8188_VPP_MERGE1_P0_SEL_IN_FROM_MDP_RDMA2		1
+#define MT8188_VDO1_MERGE0_ASYNC_SOUT_SEL			0xf40
+#define MT8188_SOUT_TO_MIXER_IN1_SEL				1
+#define MT8188_VDO1_MERGE1_ASYNC_SOUT_SEL			0xf44
+#define MT8188_SOUT_TO_MIXER_IN2_SEL				1
+#define MT8188_VDO1_MERGE2_ASYNC_SOUT_SEL			0xf48
+#define MT8188_SOUT_TO_MIXER_IN3_SEL				1
+#define MT8188_VDO1_MERGE3_ASYNC_SOUT_SEL			0xf4c
+#define MT8188_SOUT_TO_MIXER_IN4_SEL				1
+#define MT8188_VDO1_MERGE4_ASYNC_SEL_IN				0xf50
+#define MT8188_MERGE4_ASYNC_SEL_IN_FROM_MIXER_OUT_SOUT		1
+#define MT8188_VDO1_MIXER_IN1_SOUT_SEL				0xf58
+#define MT8188_MIXER_IN1_SOUT_TO_DISP_MIXER			0
+#define MT8188_VDO1_MIXER_IN2_SOUT_SEL				0xf5c
+#define MT8188_MIXER_IN2_SOUT_TO_DISP_MIXER			0
+#define MT8188_VDO1_MIXER_IN3_SOUT_SEL				0xf60
+#define MT8188_MIXER_IN3_SOUT_TO_DISP_MIXER			0
+#define MT8188_VDO1_MIXER_IN4_SOUT_SEL				0xf64
+#define MT8188_MIXER_IN4_SOUT_TO_DISP_MIXER			0
+#define MT8188_VDO1_MIXER_SOUT_SEL_IN				0xf68
+#define MT8188_MIXER_SOUT_SEL_IN_FROM_DISP_MIXER		0
+
 static const struct mtk_mmsys_routes mmsys_mt8188_routing_table[] = {
 	{
 		DDP_COMPONENT_OVL0, DDP_COMPONENT_RDMA0,
@@ -146,4 +196,80 @@ static const struct mtk_mmsys_routes mmsys_mt8188_routing_table[] = {
 	},
 };
 
+static const struct mtk_mmsys_routes mmsys_mt8188_vdo1_routing_table[] = {
+	{
+		DDP_COMPONENT_MDP_RDMA0, DDP_COMPONENT_MERGE1,
+		MT8188_VDO1_VPP_MERGE0_P0_SEL_IN, GENMASK(0, 0),
+		MT8188_VPP_MERGE0_P0_SEL_IN_FROM_MDP_RDMA0
+	}, {
+		DDP_COMPONENT_MDP_RDMA1, DDP_COMPONENT_MERGE1,
+		MT8188_VDO1_VPP_MERGE0_P1_SEL_IN, GENMASK(0, 0),
+		MT8188_VPP_MERGE0_P1_SEL_IN_FROM_MDP_RDMA1
+	}, {
+		DDP_COMPONENT_MDP_RDMA2, DDP_COMPONENT_MERGE2,
+		MT8188_VDO1_VPP_MERGE1_P0_SEL_IN, GENMASK(0, 0),
+		MT8188_VPP_MERGE1_P0_SEL_IN_FROM_MDP_RDMA2
+	}, {
+		DDP_COMPONENT_MERGE1, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MERGE0_ASYNC_SOUT_SEL, GENMASK(1, 0),
+		MT8188_SOUT_TO_MIXER_IN1_SEL
+	}, {
+		DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MERGE1_ASYNC_SOUT_SEL, GENMASK(1, 0),
+		MT8188_SOUT_TO_MIXER_IN2_SEL
+	}, {
+		DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MERGE2_ASYNC_SOUT_SEL, GENMASK(1, 0),
+		MT8188_SOUT_TO_MIXER_IN3_SEL
+	}, {
+		DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MERGE3_ASYNC_SOUT_SEL, GENMASK(1, 0),
+		MT8188_SOUT_TO_MIXER_IN4_SEL
+	}, {
+		DDP_COMPONENT_ETHDR_MIXER, DDP_COMPONENT_MERGE5,
+		MT8188_VDO1_MIXER_OUT_SOUT_SEL, GENMASK(0, 0),
+		MT8188_MIXER_SOUT_TO_MERGE4_ASYNC_SEL
+	}, {
+		DDP_COMPONENT_MERGE1, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MIXER_IN1_SEL_IN, GENMASK(0, 0),
+		MT8188_MIXER_IN1_SEL_IN_FROM_MERGE0_ASYNC_SOUT
+	}, {
+		DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MIXER_IN2_SEL_IN, GENMASK(0, 0),
+		MT8188_MIXER_IN2_SEL_IN_FROM_MERGE1_ASYNC_SOUT
+	}, {
+		DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MIXER_IN3_SEL_IN, GENMASK(0, 0),
+		MT8188_MIXER_IN3_SEL_IN_FROM_MERGE2_ASYNC_SOUT
+	}, {
+		DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER,
+		MT8188_VDO1_MIXER_IN4_SEL_IN, GENMASK(0, 0),
+		MT8188_MIXER_IN4_SEL_IN_FROM_MERGE3_ASYNC_SOUT
+	}, {
+		DDP_COMPONENT_ETHDR_MIXER, DDP_COMPONENT_MERGE5,
+		MT8188_VDO1_MIXER_SOUT_SEL_IN, GENMASK(2, 0),
+		MT8188_MIXER_SOUT_SEL_IN_FROM_DISP_MIXER
+	}, {
+		DDP_COMPONENT_ETHDR_MIXER, DDP_COMPONENT_MERGE5,
+		MT8188_VDO1_MERGE4_ASYNC_SEL_IN, GENMASK(2, 0),
+		MT8188_MERGE4_ASYNC_SEL_IN_FROM_MIXER_OUT_SOUT
+	}, {
+		DDP_COMPONENT_MERGE5, DDP_COMPONENT_DPI1,
+		MT8188_VDO1_DISP_DPI1_SEL_IN, GENMASK(1, 0),
+		MT8188_DISP_DPI1_SEL_IN_FROM_VPP_MERGE4_MOUT
+	}, {
+		DDP_COMPONENT_MERGE5, DDP_COMPONENT_DPI1,
+		MT8188_VDO1_MERGE4_SOUT_SEL, GENMASK(1, 0),
+		MT8188_MERGE4_SOUT_TO_DPI1_SEL
+	}, {
+		DDP_COMPONENT_MERGE5, DDP_COMPONENT_DP_INTF1,
+		MT8188_VDO1_DISP_DP_INTF0_SEL_IN, GENMASK(1, 0),
+		MT8188_DISP_DP_INTF0_SEL_IN_FROM_VPP_MERGE4_MOUT
+	}, {
+		DDP_COMPONENT_MERGE5, DDP_COMPONENT_DP_INTF1,
+		MT8188_VDO1_MERGE4_SOUT_SEL, GENMASK(3, 0),
+		MT8188_MERGE4_SOUT_TO_DP_INTF0_SEL
+	}
+};
+
 #endif /* __SOC_MEDIATEK_MT8188_MMSYS_H */
diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index ffb75711a1da..aa6014d25420 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -89,6 +89,14 @@ static const struct mtk_mmsys_driver_data mt8188_vdosys0_driver_data = {
 	.num_routes = ARRAY_SIZE(mmsys_mt8188_routing_table),
 };
 
+static const struct mtk_mmsys_driver_data mt8188_vdosys1_driver_data = {
+	.clk_driver = "clk-mt8188-vdo1",
+	.routes = mmsys_mt8188_vdo1_routing_table,
+	.num_routes = ARRAY_SIZE(mmsys_mt8188_vdo1_routing_table),
+	.num_resets = 96,
+	.vsync_len = 1,
+};
+
 static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data = {
 	.clk_driver = "clk-mt8192-mm",
 	.routes = mmsys_mt8192_routing_table,
@@ -169,6 +177,10 @@ void mtk_mmsys_ddp_connect(struct device *dev,
 		if (cur == routes[i].from_comp && next == routes[i].to_comp)
 			mtk_mmsys_update_bits(mmsys, routes[i].addr, routes[i].mask,
 					      routes[i].val, NULL);
+
+	if (mmsys->data->vsync_len)
+		mtk_mmsys_update_bits(mmsys, MT8188_VDO1_MIXER_VSYNC_LEN, GENMASK(31, 0),
+				      mmsys->data->vsync_len, NULL);
 }
 EXPORT_SYMBOL_GPL(mtk_mmsys_ddp_connect);
 
@@ -431,6 +443,7 @@ static const struct of_device_id of_match_mtk_mmsys[] = {
 	{ .compatible = "mediatek,mt8183-mmsys", .data = &mt8183_mmsys_driver_data },
 	{ .compatible = "mediatek,mt8186-mmsys", .data = &mt8186_mmsys_driver_data },
 	{ .compatible = "mediatek,mt8188-vdosys0", .data = &mt8188_vdosys0_driver_data },
+	{ .compatible = "mediatek,mt8188-vdosys1", .data = &mt8188_vdosys1_driver_data },
 	{ .compatible = "mediatek,mt8192-mmsys", .data = &mt8192_mmsys_driver_data },
 	/* "mediatek,mt8195-mmsys" compatible is deprecated */
 	{ .compatible = "mediatek,mt8195-mmsys", .data = &mt8195_vdosys0_driver_data },
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index 6725403d2e3a..49851bc7aa9e 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -86,6 +86,34 @@ struct mtk_mmsys_routes {
 	u32 val;
 };
 
+/**
+ * struct mtk_mmsys_driver_data - settings for the mmsys
+ * @clk_driver: Clock driver name that the mmsys is using
+ *              (defined in drivers/clk/mediatek/clk-*.c).
+ * @routes: Routing table of the mmsys.
+ *          It provides mux settings from one module to another.
+ * @num_routes: Array size of the routes.
+ * @sw0_rst_offset: Register offset for the reset control.
+ * @num_resets: Number of reset bits that are defined
+ * @is_vppsys: Whether the mmsys is VPPSYS (Video Processing Pipe)
+ *             or VDOSYS (Video). Only VDOSYS needs to be added to drm driver.
+ * @vsync_len: VSYNC length of the MIXER.
+ *             VSYNC is usually triggered by the connector, so its length is a
+ *             fixed value when the frame rate is decided, but ETHDR and
+ *             MIXER generate their own VSYNC due to hardware design, therefore
+ *             MIXER has to sync with ETHDR by adjusting VSYNC length.
+ *             On MT8195, there is no such setting so we use the gap between
+ *             falling edge and rising edge of SOF (Start of Frame) signal to
+ *             do the job, but since MT8188, VSYNC_LEN setting is introduced to
+ *             solve the problem and is given 0x40 (ticks) as the default value.
+ *             Please notice that this value has to be set to 1 (minimum) if
+ *             ETHDR is bypassed, otherwise MIXER could wait too long and causing
+ *             underflow.
+ *
+ * Each MMSYS (multi-media system) may have different settings, they may use
+ * different clock sources, mux settings, reset control ...etc., and these
+ * differences are all stored here.
+ */
 struct mtk_mmsys_driver_data {
 	const char *clk_driver;
 	const struct mtk_mmsys_routes *routes;
@@ -93,6 +121,7 @@ struct mtk_mmsys_driver_data {
 	const u16 sw0_rst_offset;
 	const u32 num_resets;
 	const bool is_vppsys;
+	const u8 vsync_len;
 };
 
 /*
diff --git a/drivers/soc/mediatek/mtk-mutex.c b/drivers/soc/mediatek/mtk-mutex.c
index 9d9f5ae578ac..e76722289175 100644
--- a/drivers/soc/mediatek/mtk-mutex.c
+++ b/drivers/soc/mediatek/mtk-mutex.c
@@ -133,6 +133,22 @@
 #define MT8188_MUTEX_MOD_DISP_POSTMASK0		24
 #define MT8188_MUTEX_MOD2_DISP_PWM0		33
 
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA0	0
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA1	1
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA2	2
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA3	3
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA4	4
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA5	5
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA6	6
+#define MT8188_MUTEX_MOD_DISP1_MDP_RDMA7	7
+#define MT8188_MUTEX_MOD_DISP1_VPP_MERGE0	20
+#define MT8188_MUTEX_MOD_DISP1_VPP_MERGE1	21
+#define MT8188_MUTEX_MOD_DISP1_VPP_MERGE2	22
+#define MT8188_MUTEX_MOD_DISP1_VPP_MERGE3	23
+#define MT8188_MUTEX_MOD_DISP1_VPP_MERGE4	24
+#define MT8188_MUTEX_MOD_DISP1_DISP_MIXER	30
+#define MT8188_MUTEX_MOD_DISP1_DP_INTF1		39
+
 #define MT8195_MUTEX_MOD_DISP_OVL0		0
 #define MT8195_MUTEX_MOD_DISP_WDMA0		1
 #define MT8195_MUTEX_MOD_DISP_RDMA0		2
@@ -264,6 +280,7 @@
 #define MT8183_MUTEX_SOF_DPI0			2
 #define MT8188_MUTEX_SOF_DSI0			1
 #define MT8188_MUTEX_SOF_DP_INTF0		3
+#define MT8188_MUTEX_SOF_DP_INTF1		4
 #define MT8195_MUTEX_SOF_DSI0			1
 #define MT8195_MUTEX_SOF_DSI1			2
 #define MT8195_MUTEX_SOF_DP_INTF0		3
@@ -275,6 +292,7 @@
 #define MT8183_MUTEX_EOF_DPI0			(MT8183_MUTEX_SOF_DPI0 << 6)
 #define MT8188_MUTEX_EOF_DSI0			(MT8188_MUTEX_SOF_DSI0 << 7)
 #define MT8188_MUTEX_EOF_DP_INTF0		(MT8188_MUTEX_SOF_DP_INTF0 << 7)
+#define MT8188_MUTEX_EOF_DP_INTF1		(MT8188_MUTEX_SOF_DP_INTF1 << 7)
 #define MT8195_MUTEX_EOF_DSI0			(MT8195_MUTEX_SOF_DSI0 << 7)
 #define MT8195_MUTEX_EOF_DSI1			(MT8195_MUTEX_SOF_DSI1 << 7)
 #define MT8195_MUTEX_EOF_DP_INTF0		(MT8195_MUTEX_SOF_DP_INTF0 << 7)
@@ -445,6 +463,21 @@ static const unsigned int mt8188_mutex_mod[DDP_COMPONENT_ID_MAX] = {
 	[DDP_COMPONENT_DSI0] = MT8188_MUTEX_MOD_DISP_DSI0,
 	[DDP_COMPONENT_PWM0] = MT8188_MUTEX_MOD2_DISP_PWM0,
 	[DDP_COMPONENT_DP_INTF0] = MT8188_MUTEX_MOD_DISP_DP_INTF0,
+	[DDP_COMPONENT_DP_INTF1] = MT8188_MUTEX_MOD_DISP1_DP_INTF1,
+	[DDP_COMPONENT_ETHDR_MIXER] = MT8188_MUTEX_MOD_DISP1_DISP_MIXER,
+	[DDP_COMPONENT_MDP_RDMA0] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA0,
+	[DDP_COMPONENT_MDP_RDMA1] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA1,
+	[DDP_COMPONENT_MDP_RDMA2] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA2,
+	[DDP_COMPONENT_MDP_RDMA3] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA3,
+	[DDP_COMPONENT_MDP_RDMA4] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA4,
+	[DDP_COMPONENT_MDP_RDMA5] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA5,
+	[DDP_COMPONENT_MDP_RDMA6] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA6,
+	[DDP_COMPONENT_MDP_RDMA7] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA7,
+	[DDP_COMPONENT_MERGE1] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE0,
+	[DDP_COMPONENT_MERGE2] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE1,
+	[DDP_COMPONENT_MERGE3] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE2,
+	[DDP_COMPONENT_MERGE4] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE3,
+	[DDP_COMPONENT_MERGE5] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE4,
 };
 
 static const unsigned int mt8192_mutex_mod[DDP_COMPONENT_ID_MAX] = {
@@ -605,6 +638,8 @@ static const unsigned int mt8188_mutex_sof[DDP_MUTEX_SOF_MAX] = {
 		MT8188_MUTEX_SOF_DSI0 | MT8188_MUTEX_EOF_DSI0,
 	[MUTEX_SOF_DP_INTF0] =
 		MT8188_MUTEX_SOF_DP_INTF0 | MT8188_MUTEX_EOF_DP_INTF0,
+	[MUTEX_SOF_DP_INTF1] =
+		MT8188_MUTEX_SOF_DP_INTF1 | MT8188_MUTEX_EOF_DP_INTF1,
 };
 
 static const unsigned int mt8195_mutex_sof[DDP_MUTEX_SOF_MAX] = {
-- 
2.18.0

[PATCH v7 08/23] soc: mediatek: Support MT8188 VDOSYS1 Padding in mtk-mmsys

[Hsiao Chien Sung]

- Add Padding components
- Add Mutex module definitions for Padding

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/soc/mediatek/mtk-mutex.c       | 16 ++++++++++++++++
 include/linux/soc/mediatek/mtk-mmsys.h |  8 ++++++++
 2 files changed, 24 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-mutex.c b/drivers/soc/mediatek/mtk-mutex.c
index e76722289175..73c256d3950b 100644
--- a/drivers/soc/mediatek/mtk-mutex.c
+++ b/drivers/soc/mediatek/mtk-mutex.c
@@ -141,6 +141,14 @@
 #define MT8188_MUTEX_MOD_DISP1_MDP_RDMA5	5
 #define MT8188_MUTEX_MOD_DISP1_MDP_RDMA6	6
 #define MT8188_MUTEX_MOD_DISP1_MDP_RDMA7	7
+#define MT8188_MUTEX_MOD_DISP1_PADDING0		8
+#define MT8188_MUTEX_MOD_DISP1_PADDING1		9
+#define MT8188_MUTEX_MOD_DISP1_PADDING2		10
+#define MT8188_MUTEX_MOD_DISP1_PADDING3		11
+#define MT8188_MUTEX_MOD_DISP1_PADDING4		12
+#define MT8188_MUTEX_MOD_DISP1_PADDING5		13
+#define MT8188_MUTEX_MOD_DISP1_PADDING6		14
+#define MT8188_MUTEX_MOD_DISP1_PADDING7		15
 #define MT8188_MUTEX_MOD_DISP1_VPP_MERGE0	20
 #define MT8188_MUTEX_MOD_DISP1_VPP_MERGE1	21
 #define MT8188_MUTEX_MOD_DISP1_VPP_MERGE2	22
@@ -473,6 +481,14 @@ static const unsigned int mt8188_mutex_mod[DDP_COMPONENT_ID_MAX] = {
 	[DDP_COMPONENT_MDP_RDMA5] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA5,
 	[DDP_COMPONENT_MDP_RDMA6] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA6,
 	[DDP_COMPONENT_MDP_RDMA7] = MT8188_MUTEX_MOD_DISP1_MDP_RDMA7,
+	[DDP_COMPONENT_PADDING0] = MT8188_MUTEX_MOD_DISP1_PADDING0,
+	[DDP_COMPONENT_PADDING1] = MT8188_MUTEX_MOD_DISP1_PADDING1,
+	[DDP_COMPONENT_PADDING2] = MT8188_MUTEX_MOD_DISP1_PADDING2,
+	[DDP_COMPONENT_PADDING3] = MT8188_MUTEX_MOD_DISP1_PADDING3,
+	[DDP_COMPONENT_PADDING4] = MT8188_MUTEX_MOD_DISP1_PADDING4,
+	[DDP_COMPONENT_PADDING5] = MT8188_MUTEX_MOD_DISP1_PADDING5,
+	[DDP_COMPONENT_PADDING6] = MT8188_MUTEX_MOD_DISP1_PADDING6,
+	[DDP_COMPONENT_PADDING7] = MT8188_MUTEX_MOD_DISP1_PADDING7,
 	[DDP_COMPONENT_MERGE1] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE0,
 	[DDP_COMPONENT_MERGE2] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE1,
 	[DDP_COMPONENT_MERGE3] = MT8188_MUTEX_MOD_DISP1_VPP_MERGE2,
diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
index 2475ef914746..4885b065b849 100644
--- a/include/linux/soc/mediatek/mtk-mmsys.h
+++ b/include/linux/soc/mediatek/mtk-mmsys.h
@@ -62,6 +62,14 @@ enum mtk_ddp_comp_id {
 	DDP_COMPONENT_OVL_2L1,
 	DDP_COMPONENT_OVL_2L2,
 	DDP_COMPONENT_OVL1,
+	DDP_COMPONENT_PADDING0,
+	DDP_COMPONENT_PADDING1,
+	DDP_COMPONENT_PADDING2,
+	DDP_COMPONENT_PADDING3,
+	DDP_COMPONENT_PADDING4,
+	DDP_COMPONENT_PADDING5,
+	DDP_COMPONENT_PADDING6,
+	DDP_COMPONENT_PADDING7,
 	DDP_COMPONENT_POSTMASK0,
 	DDP_COMPONENT_PWM0,
 	DDP_COMPONENT_PWM1,
-- 
2.18.0

[PATCH v7 09/23] soc: mediatek: Support reset bit mapping in mmsys driver

[Hsiao Chien Sung]

- Reset ID must starts from 0 and be consecutive, but
  the reset bits in our hardware design is not continuous,
  some bits are left unused, we need a map to solve the problem
- Use old style 1-to-1 mapping if .rst_tb is not defined

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/soc/mediatek/mtk-mmsys.c | 9 +++++++++
 drivers/soc/mediatek/mtk-mmsys.h | 3 +++
 2 files changed, 12 insertions(+)

diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index aa6014d25420..be061df8a39d 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -314,6 +314,15 @@ static int mtk_mmsys_reset_update(struct reset_controller_dev *rcdev, unsigned l
 	u32 offset;
 	u32 reg;
 
+	if (mmsys->data->rst_tb) {
+		if (id >= mmsys->data->num_resets) {
+			dev_err(rcdev->dev, "Invalid reset ID: %lu (>=%u)\n",
+				id, mmsys->data->num_resets);
+			return -EINVAL;
+		}
+		id = mmsys->data->rst_tb[id];
+	}
+
 	offset = (id / MMSYS_SW_RESET_PER_REG) * sizeof(u32);
 	id = id % MMSYS_SW_RESET_PER_REG;
 	reg = mmsys->data->sw0_rst_offset + offset;
diff --git a/drivers/soc/mediatek/mtk-mmsys.h b/drivers/soc/mediatek/mtk-mmsys.h
index 49851bc7aa9e..c90419c96a7d 100644
--- a/drivers/soc/mediatek/mtk-mmsys.h
+++ b/drivers/soc/mediatek/mtk-mmsys.h
@@ -78,6 +78,8 @@
 #define DSI_SEL_IN_RDMA				0x1
 #define DSI_SEL_IN_MASK				0x1
 
+#define MMSYS_RST_NR(bank, bit) (((bank) * 32) + (bit))
+
 struct mtk_mmsys_routes {
 	u32 from_comp;
 	u32 to_comp;
@@ -119,6 +121,7 @@ struct mtk_mmsys_driver_data {
 	const struct mtk_mmsys_routes *routes;
 	const unsigned int num_routes;
 	const u16 sw0_rst_offset;
+	const u8 *rst_tb;
 	const u32 num_resets;
 	const bool is_vppsys;
 	const u8 vsync_len;
-- 
2.18.0

[PATCH v7 10/23] soc: mediatek: Add MT8188 VDOSYS reset bit map

[Hsiao Chien Sung]

Add MT8188 reset bit map for VDOSYS0 and VDOSYS1.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/soc/mediatek/mt8188-mmsys.h | 84 +++++++++++++++++++++++++++++
 drivers/soc/mediatek/mtk-mmsys.c    |  7 ++-
 2 files changed, 90 insertions(+), 1 deletion(-)

diff --git a/drivers/soc/mediatek/mt8188-mmsys.h b/drivers/soc/mediatek/mt8188-mmsys.h
index a9490c3c4256..6bebf1a69fc0 100644
--- a/drivers/soc/mediatek/mt8188-mmsys.h
+++ b/drivers/soc/mediatek/mt8188-mmsys.h
@@ -3,6 +3,10 @@
 #ifndef __SOC_MEDIATEK_MT8188_MMSYS_H
 #define __SOC_MEDIATEK_MT8188_MMSYS_H
 
+#include <linux/soc/mediatek/mtk-mmsys.h>
+#include <dt-bindings/reset/mt8188-resets.h>
+
+#define MT8188_VDO0_SW0_RST_B				0x190
 #define MT8188_VDO0_OVL_MOUT_EN				0xf14
 #define MT8188_MOUT_DISP_OVL0_TO_DISP_RDMA0		BIT(0)
 #define MT8188_MOUT_DISP_OVL0_TO_DISP_WDMA0		BIT(1)
@@ -67,6 +71,7 @@
 #define MT8188_SOUT_DSC_WRAP0_OUT_TO_VPP_MERGE		BIT(18)
 #define MT8188_SOUT_DSC_WRAP0_OUT_TO_DISP_WDMA0		BIT(19)
 
+#define MT8188_VDO1_SW0_RST_B					0x1d0
 #define MT8188_VDO1_HDR_TOP_CFG					0xd00
 #define MT8188_VDO1_MIXER_IN1_ALPHA				0xd30
 #define MT8188_VDO1_MIXER_IN1_PAD				0xd40
@@ -117,6 +122,85 @@
 #define MT8188_VDO1_MIXER_SOUT_SEL_IN				0xf68
 #define MT8188_MIXER_SOUT_SEL_IN_FROM_DISP_MIXER		0
 
+static const u8 mmsys_mt8188_vdo0_rst_tb[] = {
+	[MT8188_VDO0_RST_DISP_OVL0]	= MMSYS_RST_NR(0, 0),
+	[MT8188_VDO0_RST_FAKE_ENG0]	= MMSYS_RST_NR(0, 2),
+	[MT8188_VDO0_RST_DISP_CCORR0]	= MMSYS_RST_NR(0, 4),
+	[MT8188_VDO0_RST_DISP_MUTEX0]	= MMSYS_RST_NR(0, 6),
+	[MT8188_VDO0_RST_DISP_GAMMA0]	= MMSYS_RST_NR(0, 8),
+	[MT8188_VDO0_RST_DISP_DITHER0]	= MMSYS_RST_NR(0, 10),
+	[MT8188_VDO0_RST_DISP_WDMA0]	= MMSYS_RST_NR(0, 17),
+	[MT8188_VDO0_RST_DISP_RDMA0]	= MMSYS_RST_NR(0, 19),
+	[MT8188_VDO0_RST_DSI0]		= MMSYS_RST_NR(0, 21),
+	[MT8188_VDO0_RST_DSI1]		= MMSYS_RST_NR(0, 22),
+	[MT8188_VDO0_RST_DSC_WRAP0]	= MMSYS_RST_NR(0, 23),
+	[MT8188_VDO0_RST_VPP_MERGE0]	= MMSYS_RST_NR(0, 24),
+	[MT8188_VDO0_RST_DP_INTF0]	= MMSYS_RST_NR(0, 25),
+	[MT8188_VDO0_RST_DISP_AAL0]	= MMSYS_RST_NR(0, 26),
+	[MT8188_VDO0_RST_INLINEROT0]	= MMSYS_RST_NR(0, 27),
+	[MT8188_VDO0_RST_APB_BUS]	= MMSYS_RST_NR(0, 28),
+	[MT8188_VDO0_RST_DISP_COLOR0]	= MMSYS_RST_NR(0, 29),
+	[MT8188_VDO0_RST_MDP_WROT0]	= MMSYS_RST_NR(0, 30),
+	[MT8188_VDO0_RST_DISP_RSZ0]	= MMSYS_RST_NR(0, 31),
+};
+
+static const u8 mmsys_mt8188_vdo1_rst_tb[] = {
+	[MT8188_VDO1_RST_SMI_LARB2]			= MMSYS_RST_NR(0, 0),
+	[MT8188_VDO1_RST_SMI_LARB3]			= MMSYS_RST_NR(0, 1),
+	[MT8188_VDO1_RST_GALS]				= MMSYS_RST_NR(0, 2),
+	[MT8188_VDO1_RST_FAKE_ENG0]			= MMSYS_RST_NR(0, 3),
+	[MT8188_VDO1_RST_FAKE_ENG1]			= MMSYS_RST_NR(0, 4),
+	[MT8188_VDO1_RST_MDP_RDMA0]			= MMSYS_RST_NR(0, 5),
+	[MT8188_VDO1_RST_MDP_RDMA1]			= MMSYS_RST_NR(0, 6),
+	[MT8188_VDO1_RST_MDP_RDMA2]			= MMSYS_RST_NR(0, 7),
+	[MT8188_VDO1_RST_MDP_RDMA3]			= MMSYS_RST_NR(0, 8),
+	[MT8188_VDO1_RST_VPP_MERGE0]			= MMSYS_RST_NR(0, 9),
+	[MT8188_VDO1_RST_VPP_MERGE1]			= MMSYS_RST_NR(0, 10),
+	[MT8188_VDO1_RST_VPP_MERGE2]			= MMSYS_RST_NR(0, 11),
+	[MT8188_VDO1_RST_VPP_MERGE3]			= MMSYS_RST_NR(1, 0),
+	[MT8188_VDO1_RST_VPP_MERGE4]			= MMSYS_RST_NR(1, 1),
+	[MT8188_VDO1_RST_VPP2_TO_VDO1_DL_ASYNC]		= MMSYS_RST_NR(1, 2),
+	[MT8188_VDO1_RST_VPP3_TO_VDO1_DL_ASYNC]		= MMSYS_RST_NR(1, 3),
+	[MT8188_VDO1_RST_DISP_MUTEX]			= MMSYS_RST_NR(1, 4),
+	[MT8188_VDO1_RST_MDP_RDMA4]			= MMSYS_RST_NR(1, 5),
+	[MT8188_VDO1_RST_MDP_RDMA5]			= MMSYS_RST_NR(1, 6),
+	[MT8188_VDO1_RST_MDP_RDMA6]			= MMSYS_RST_NR(1, 7),
+	[MT8188_VDO1_RST_MDP_RDMA7]			= MMSYS_RST_NR(1, 8),
+	[MT8188_VDO1_RST_DP_INTF1_MMCK]			= MMSYS_RST_NR(1, 9),
+	[MT8188_VDO1_RST_DPI0_MM_CK]			= MMSYS_RST_NR(1, 10),
+	[MT8188_VDO1_RST_DPI1_MM_CK]			= MMSYS_RST_NR(1, 11),
+	[MT8188_VDO1_RST_MERGE0_DL_ASYNC]		= MMSYS_RST_NR(1, 13),
+	[MT8188_VDO1_RST_MERGE1_DL_ASYNC]		= MMSYS_RST_NR(1, 14),
+	[MT8188_VDO1_RST_MERGE2_DL_ASYNC]		= MMSYS_RST_NR(1, 15),
+	[MT8188_VDO1_RST_MERGE3_DL_ASYNC]		= MMSYS_RST_NR(1, 16),
+	[MT8188_VDO1_RST_MERGE4_DL_ASYNC]		= MMSYS_RST_NR(1, 17),
+	[MT8188_VDO1_RST_VDO0_DSC_TO_VDO1_DL_ASYNC]	= MMSYS_RST_NR(1, 18),
+	[MT8188_VDO1_RST_VDO0_MERGE_TO_VDO1_DL_ASYNC]	= MMSYS_RST_NR(1, 19),
+	[MT8188_VDO1_RST_PADDING0]			= MMSYS_RST_NR(1, 20),
+	[MT8188_VDO1_RST_PADDING1]			= MMSYS_RST_NR(1, 21),
+	[MT8188_VDO1_RST_PADDING2]			= MMSYS_RST_NR(1, 22),
+	[MT8188_VDO1_RST_PADDING3]			= MMSYS_RST_NR(1, 23),
+	[MT8188_VDO1_RST_PADDING4]			= MMSYS_RST_NR(1, 24),
+	[MT8188_VDO1_RST_PADDING5]			= MMSYS_RST_NR(1, 25),
+	[MT8188_VDO1_RST_PADDING6]			= MMSYS_RST_NR(1, 26),
+	[MT8188_VDO1_RST_PADDING7]			= MMSYS_RST_NR(1, 27),
+	[MT8188_VDO1_RST_DISP_RSZ0]			= MMSYS_RST_NR(1, 28),
+	[MT8188_VDO1_RST_DISP_RSZ1]			= MMSYS_RST_NR(1, 29),
+	[MT8188_VDO1_RST_DISP_RSZ2]			= MMSYS_RST_NR(1, 30),
+	[MT8188_VDO1_RST_DISP_RSZ3]			= MMSYS_RST_NR(1, 31),
+	[MT8188_VDO1_RST_HDR_VDO_FE0]			= MMSYS_RST_NR(2, 0),
+	[MT8188_VDO1_RST_HDR_GFX_FE0]			= MMSYS_RST_NR(2, 1),
+	[MT8188_VDO1_RST_HDR_VDO_BE]			= MMSYS_RST_NR(2, 2),
+	[MT8188_VDO1_RST_HDR_VDO_FE1]			= MMSYS_RST_NR(2, 16),
+	[MT8188_VDO1_RST_HDR_GFX_FE1]			= MMSYS_RST_NR(2, 17),
+	[MT8188_VDO1_RST_DISP_MIXER]			= MMSYS_RST_NR(2, 18),
+	[MT8188_VDO1_RST_HDR_VDO_FE0_DL_ASYNC]		= MMSYS_RST_NR(2, 19),
+	[MT8188_VDO1_RST_HDR_VDO_FE1_DL_ASYNC]		= MMSYS_RST_NR(2, 20),
+	[MT8188_VDO1_RST_HDR_GFX_FE0_DL_ASYNC]		= MMSYS_RST_NR(2, 21),
+	[MT8188_VDO1_RST_HDR_GFX_FE1_DL_ASYNC]		= MMSYS_RST_NR(2, 22),
+	[MT8188_VDO1_RST_HDR_VDO_BE_DL_ASYNC]		= MMSYS_RST_NR(2, 23),
+};
+
 static const struct mtk_mmsys_routes mmsys_mt8188_routing_table[] = {
 	{
 		DDP_COMPONENT_OVL0, DDP_COMPONENT_RDMA0,
diff --git a/drivers/soc/mediatek/mtk-mmsys.c b/drivers/soc/mediatek/mtk-mmsys.c
index be061df8a39d..9e15eeaccc3d 100644
--- a/drivers/soc/mediatek/mtk-mmsys.c
+++ b/drivers/soc/mediatek/mtk-mmsys.c
@@ -87,13 +87,18 @@ static const struct mtk_mmsys_driver_data mt8188_vdosys0_driver_data = {
 	.clk_driver = "clk-mt8188-vdo0",
 	.routes = mmsys_mt8188_routing_table,
 	.num_routes = ARRAY_SIZE(mmsys_mt8188_routing_table),
+	.sw0_rst_offset = MT8188_VDO0_SW0_RST_B,
+	.rst_tb = mmsys_mt8188_vdo0_rst_tb,
+	.num_resets = ARRAY_SIZE(mmsys_mt8188_vdo0_rst_tb),
 };
 
 static const struct mtk_mmsys_driver_data mt8188_vdosys1_driver_data = {
 	.clk_driver = "clk-mt8188-vdo1",
 	.routes = mmsys_mt8188_vdo1_routing_table,
 	.num_routes = ARRAY_SIZE(mmsys_mt8188_vdo1_routing_table),
-	.num_resets = 96,
+	.sw0_rst_offset = MT8188_VDO1_SW0_RST_B,
+	.rst_tb = mmsys_mt8188_vdo1_rst_tb,
+	.num_resets = ARRAY_SIZE(mmsys_mt8188_vdo1_rst_tb),
 	.vsync_len = 1,
 };
 
-- 
2.18.0

[PATCH v7 11/23] drm/mediatek: Rename OVL_ADAPTOR_TYPE_RDMA

[Hsiao Chien Sung]

Rename OVL_ADAPTOR_TYPE_RDMA to OVL_ADAPTOR_TYPE_MDP_RDMA
to align the naming rule of mtk_ovl_adaptor_comp_id.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 22 +++++++++----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 6bf6367853fb..114eded8177e 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -27,7 +27,7 @@
 #define MTK_OVL_ADAPTOR_LAYER_NUM 4
 
 enum mtk_ovl_adaptor_comp_type {
-	OVL_ADAPTOR_TYPE_RDMA = 0,
+	OVL_ADAPTOR_TYPE_MDP_RDMA = 0,
 	OVL_ADAPTOR_TYPE_MERGE,
 	OVL_ADAPTOR_TYPE_ETHDR,
 	OVL_ADAPTOR_TYPE_NUM,
@@ -62,20 +62,20 @@ struct mtk_disp_ovl_adaptor {
 };
 
 static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
-	[OVL_ADAPTOR_TYPE_RDMA]		= "vdo1-rdma",
+	[OVL_ADAPTOR_TYPE_MDP_RDMA]	= "vdo1-rdma",
 	[OVL_ADAPTOR_TYPE_MERGE]	= "merge",
 	[OVL_ADAPTOR_TYPE_ETHDR]	= "ethdr",
 };
 
 static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
-	[OVL_ADAPTOR_MDP_RDMA0]	= { OVL_ADAPTOR_TYPE_RDMA, 0 },
-	[OVL_ADAPTOR_MDP_RDMA1]	= { OVL_ADAPTOR_TYPE_RDMA, 1 },
-	[OVL_ADAPTOR_MDP_RDMA2]	= { OVL_ADAPTOR_TYPE_RDMA, 2 },
-	[OVL_ADAPTOR_MDP_RDMA3]	= { OVL_ADAPTOR_TYPE_RDMA, 3 },
-	[OVL_ADAPTOR_MDP_RDMA4]	= { OVL_ADAPTOR_TYPE_RDMA, 4 },
-	[OVL_ADAPTOR_MDP_RDMA5]	= { OVL_ADAPTOR_TYPE_RDMA, 5 },
-	[OVL_ADAPTOR_MDP_RDMA6]	= { OVL_ADAPTOR_TYPE_RDMA, 6 },
-	[OVL_ADAPTOR_MDP_RDMA7]	= { OVL_ADAPTOR_TYPE_RDMA, 7 },
+	[OVL_ADAPTOR_MDP_RDMA0]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 0 },
+	[OVL_ADAPTOR_MDP_RDMA1]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 1 },
+	[OVL_ADAPTOR_MDP_RDMA2]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 2 },
+	[OVL_ADAPTOR_MDP_RDMA3]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 3 },
+	[OVL_ADAPTOR_MDP_RDMA4]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 4 },
+	[OVL_ADAPTOR_MDP_RDMA5]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 5 },
+	[OVL_ADAPTOR_MDP_RDMA6]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 6 },
+	[OVL_ADAPTOR_MDP_RDMA7]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 7 },
 	[OVL_ADAPTOR_MERGE0]	= { OVL_ADAPTOR_TYPE_MERGE, 1 },
 	[OVL_ADAPTOR_MERGE1]	= { OVL_ADAPTOR_TYPE_MERGE, 2 },
 	[OVL_ADAPTOR_MERGE2]	= { OVL_ADAPTOR_TYPE_MERGE, 3 },
@@ -388,7 +388,7 @@ static int ovl_adaptor_comp_get_id(struct device *dev, struct device_node *node,
 static const struct of_device_id mtk_ovl_adaptor_comp_dt_ids[] = {
 	{
 		.compatible = "mediatek,mt8195-vdo1-rdma",
-		.data = (void *)OVL_ADAPTOR_TYPE_RDMA,
+		.data = (void *)OVL_ADAPTOR_TYPE_MDP_RDMA,
 	}, {
 		.compatible = "mediatek,mt8195-disp-merge",
 		.data = (void *)OVL_ADAPTOR_TYPE_MERGE,
-- 
2.18.0

[PATCH v7 12/23] drm/mediatek: Refine device table of OVL adaptor

[Hsiao Chien Sung]

- Adjust indentation to align with other files
- Sort device table in alphabetical order
- Add sentinel to device table

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 114eded8177e..4a5fab5ea51f 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -386,17 +386,10 @@ static int ovl_adaptor_comp_get_id(struct device *dev, struct device_node *node,
 }
 
 static const struct of_device_id mtk_ovl_adaptor_comp_dt_ids[] = {
-	{
-		.compatible = "mediatek,mt8195-vdo1-rdma",
-		.data = (void *)OVL_ADAPTOR_TYPE_MDP_RDMA,
-	}, {
-		.compatible = "mediatek,mt8195-disp-merge",
-		.data = (void *)OVL_ADAPTOR_TYPE_MERGE,
-	}, {
-		.compatible = "mediatek,mt8195-disp-ethdr",
-		.data = (void *)OVL_ADAPTOR_TYPE_ETHDR,
-	},
-	{},
+	{ .compatible = "mediatek,mt8195-disp-ethdr", .data = (void *)OVL_ADAPTOR_TYPE_ETHDR },
+	{ .compatible = "mediatek,mt8195-disp-merge", .data = (void *)OVL_ADAPTOR_TYPE_MERGE },
+	{ .compatible = "mediatek,mt8195-vdo1-rdma", .data = (void *)OVL_ADAPTOR_TYPE_MDP_RDMA },
+	{ /* sentinel */ }
 };
 
 static int compare_of(struct device *dev, void *data)
-- 
2.18.0

[PATCH v7 13/23] drm/mediatek: Sort OVL adaptor components

[Hsiao Chien Sung]

Sort OVL adaptor components' names in alphabetical order.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c    | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 4a5fab5ea51f..72758e41b1e6 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -27,13 +27,14 @@
 #define MTK_OVL_ADAPTOR_LAYER_NUM 4
 
 enum mtk_ovl_adaptor_comp_type {
-	OVL_ADAPTOR_TYPE_MDP_RDMA = 0,
-	OVL_ADAPTOR_TYPE_MERGE,
 	OVL_ADAPTOR_TYPE_ETHDR,
+	OVL_ADAPTOR_TYPE_MDP_RDMA,
+	OVL_ADAPTOR_TYPE_MERGE,
 	OVL_ADAPTOR_TYPE_NUM,
 };
 
 enum mtk_ovl_adaptor_comp_id {
+	OVL_ADAPTOR_ETHDR0,
 	OVL_ADAPTOR_MDP_RDMA0,
 	OVL_ADAPTOR_MDP_RDMA1,
 	OVL_ADAPTOR_MDP_RDMA2,
@@ -46,7 +47,6 @@ enum mtk_ovl_adaptor_comp_id {
 	OVL_ADAPTOR_MERGE1,
 	OVL_ADAPTOR_MERGE2,
 	OVL_ADAPTOR_MERGE3,
-	OVL_ADAPTOR_ETHDR0,
 	OVL_ADAPTOR_ID_MAX
 };
 
@@ -62,12 +62,13 @@ struct mtk_disp_ovl_adaptor {
 };
 
 static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
+	[OVL_ADAPTOR_TYPE_ETHDR]	= "ethdr",
 	[OVL_ADAPTOR_TYPE_MDP_RDMA]	= "vdo1-rdma",
 	[OVL_ADAPTOR_TYPE_MERGE]	= "merge",
-	[OVL_ADAPTOR_TYPE_ETHDR]	= "ethdr",
 };
 
 static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
+	[OVL_ADAPTOR_ETHDR0]	= { OVL_ADAPTOR_TYPE_ETHDR, 0 },
 	[OVL_ADAPTOR_MDP_RDMA0]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 0 },
 	[OVL_ADAPTOR_MDP_RDMA1]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 1 },
 	[OVL_ADAPTOR_MDP_RDMA2]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 2 },
@@ -80,7 +81,6 @@ static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
 	[OVL_ADAPTOR_MERGE1]	= { OVL_ADAPTOR_TYPE_MERGE, 2 },
 	[OVL_ADAPTOR_MERGE2]	= { OVL_ADAPTOR_TYPE_MERGE, 3 },
 	[OVL_ADAPTOR_MERGE3]	= { OVL_ADAPTOR_TYPE_MERGE, 4 },
-	[OVL_ADAPTOR_ETHDR0]	= { OVL_ADAPTOR_TYPE_ETHDR, 0 },
 };
 
 void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
@@ -314,6 +314,7 @@ size_t mtk_ovl_adaptor_get_num_formats(struct device *dev)
 
 void mtk_ovl_adaptor_add_comp(struct device *dev, struct mtk_mutex *mutex)
 {
+	mtk_mutex_add_comp(mutex, DDP_COMPONENT_ETHDR_MIXER);
 	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA0);
 	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA1);
 	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA2);
@@ -326,11 +327,11 @@ void mtk_ovl_adaptor_add_comp(struct device *dev, struct mtk_mutex *mutex)
 	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MERGE2);
 	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MERGE3);
 	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MERGE4);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_ETHDR_MIXER);
 }
 
 void mtk_ovl_adaptor_remove_comp(struct device *dev, struct mtk_mutex *mutex)
 {
+	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_ETHDR_MIXER);
 	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA0);
 	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA1);
 	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA2);
@@ -343,11 +344,11 @@ void mtk_ovl_adaptor_remove_comp(struct device *dev, struct mtk_mutex *mutex)
 	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MERGE2);
 	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MERGE3);
 	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MERGE4);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_ETHDR_MIXER);
 }
 
 void mtk_ovl_adaptor_connect(struct device *dev, struct device *mmsys_dev, unsigned int next)
 {
+	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MDP_RDMA0, DDP_COMPONENT_MERGE1);
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MDP_RDMA1, DDP_COMPONENT_MERGE1);
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MDP_RDMA2, DDP_COMPONENT_MERGE2);
@@ -355,11 +356,11 @@ void mtk_ovl_adaptor_connect(struct device *dev, struct device *mmsys_dev, unsig
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER);
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER);
 	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER);
-	mtk_mmsys_ddp_connect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
 }
 
 void mtk_ovl_adaptor_disconnect(struct device *dev, struct device *mmsys_dev, unsigned int next)
 {
+	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MDP_RDMA0, DDP_COMPONENT_MERGE1);
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MDP_RDMA1, DDP_COMPONENT_MERGE1);
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MDP_RDMA2, DDP_COMPONENT_MERGE2);
@@ -367,7 +368,6 @@ void mtk_ovl_adaptor_disconnect(struct device *dev, struct device *mmsys_dev, un
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MERGE2, DDP_COMPONENT_ETHDR_MIXER);
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MERGE3, DDP_COMPONENT_ETHDR_MIXER);
 	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_MERGE4, DDP_COMPONENT_ETHDR_MIXER);
-	mtk_mmsys_ddp_disconnect(mmsys_dev, DDP_COMPONENT_ETHDR_MIXER, next);
 }
 
 static int ovl_adaptor_comp_get_id(struct device *dev, struct device_node *node,
-- 
2.18.0

[PATCH v7 14/23] drm/mediatek: Add component ID to component match structure

[Hsiao Chien Sung]

Add component ID to component match structure so we can
configure them with a for-loop.

The main reason we do such code refactoring is that
there is a new hardware component called "Padding" since
MT8188, while MT8195 doesn't have this module, we can't
use the original logic to manage the components.

While MT8195 does not define Padding in the device tree,
the corresponding components will be NULL and being skipped
by the functions.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 69 ++++++++-----------
 1 file changed, 30 insertions(+), 39 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 72758e41b1e6..8a52d1301e04 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -52,6 +52,7 @@ enum mtk_ovl_adaptor_comp_id {
 
 struct ovl_adaptor_comp_match {
 	enum mtk_ovl_adaptor_comp_type type;
+	enum mtk_ddp_comp_id comp_id;
 	int alias_id;
 };
 
@@ -68,19 +69,19 @@ static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
 };
 
 static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
-	[OVL_ADAPTOR_ETHDR0]	= { OVL_ADAPTOR_TYPE_ETHDR, 0 },
-	[OVL_ADAPTOR_MDP_RDMA0]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 0 },
-	[OVL_ADAPTOR_MDP_RDMA1]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 1 },
-	[OVL_ADAPTOR_MDP_RDMA2]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 2 },
-	[OVL_ADAPTOR_MDP_RDMA3]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 3 },
-	[OVL_ADAPTOR_MDP_RDMA4]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 4 },
-	[OVL_ADAPTOR_MDP_RDMA5]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 5 },
-	[OVL_ADAPTOR_MDP_RDMA6]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 6 },
-	[OVL_ADAPTOR_MDP_RDMA7]	= { OVL_ADAPTOR_TYPE_MDP_RDMA, 7 },
-	[OVL_ADAPTOR_MERGE0]	= { OVL_ADAPTOR_TYPE_MERGE, 1 },
-	[OVL_ADAPTOR_MERGE1]	= { OVL_ADAPTOR_TYPE_MERGE, 2 },
-	[OVL_ADAPTOR_MERGE2]	= { OVL_ADAPTOR_TYPE_MERGE, 3 },
-	[OVL_ADAPTOR_MERGE3]	= { OVL_ADAPTOR_TYPE_MERGE, 4 },
+	[OVL_ADAPTOR_ETHDR0] = { OVL_ADAPTOR_TYPE_ETHDR, DDP_COMPONENT_ETHDR_MIXER, 0 },
+	[OVL_ADAPTOR_MDP_RDMA0] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA0, 0 },
+	[OVL_ADAPTOR_MDP_RDMA1] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA1, 1 },
+	[OVL_ADAPTOR_MDP_RDMA2] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA2, 2 },
+	[OVL_ADAPTOR_MDP_RDMA3] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA3, 3 },
+	[OVL_ADAPTOR_MDP_RDMA4] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA4, 4 },
+	[OVL_ADAPTOR_MDP_RDMA5] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA5, 5 },
+	[OVL_ADAPTOR_MDP_RDMA6] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA6, 6 },
+	[OVL_ADAPTOR_MDP_RDMA7] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA7, 7 },
+	[OVL_ADAPTOR_MERGE0] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE1, 1 },
+	[OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE2, 2 },
+	[OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE3, 3 },
+	[OVL_ADAPTOR_MERGE3] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE4, 4 },
 };
 
 void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
@@ -314,36 +315,26 @@ size_t mtk_ovl_adaptor_get_num_formats(struct device *dev)
 
 void mtk_ovl_adaptor_add_comp(struct device *dev, struct mtk_mutex *mutex)
 {
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_ETHDR_MIXER);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA0);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA1);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA2);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA3);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA4);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA5);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA6);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MDP_RDMA7);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MERGE1);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MERGE2);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MERGE3);
-	mtk_mutex_add_comp(mutex, DDP_COMPONENT_MERGE4);
+	int i;
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+
+	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
+		if (!ovl_adaptor->ovl_adaptor_comp[i])
+			continue;
+		mtk_mutex_add_comp(mutex, comp_matches[i].comp_id);
+	}
 }
 
 void mtk_ovl_adaptor_remove_comp(struct device *dev, struct mtk_mutex *mutex)
 {
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_ETHDR_MIXER);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA0);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA1);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA2);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA3);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA4);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA5);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA6);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MDP_RDMA7);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MERGE1);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MERGE2);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MERGE3);
-	mtk_mutex_remove_comp(mutex, DDP_COMPONENT_MERGE4);
+	int i;
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+
+	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
+		if (!ovl_adaptor->ovl_adaptor_comp[i])
+			continue;
+		mtk_mutex_remove_comp(mutex, comp_matches[i].comp_id);
+	}
 }
 
 void mtk_ovl_adaptor_connect(struct device *dev, struct device *mmsys_dev, unsigned int next)
-- 
2.18.0

[PATCH v7 15/23] drm/mediatek: Manage component's clock with function pointers

[Hsiao Chien Sung]

By registering component related functions to the pointers,
we can easily manage them within a for-loop and simplify the
logic of clock control significantly.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 111 +++++++-----------
 1 file changed, 44 insertions(+), 67 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 8a52d1301e04..84133303a6ec 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -54,6 +54,7 @@ struct ovl_adaptor_comp_match {
 	enum mtk_ovl_adaptor_comp_type type;
 	enum mtk_ddp_comp_id comp_id;
 	int alias_id;
+	const struct mtk_ddp_comp_funcs *funcs;
 };
 
 struct mtk_disp_ovl_adaptor {
@@ -68,20 +69,35 @@ static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
 	[OVL_ADAPTOR_TYPE_MERGE]	= "merge",
 };
 
+static const struct mtk_ddp_comp_funcs _ethdr = {
+	.clk_enable = mtk_ethdr_clk_enable,
+	.clk_disable = mtk_ethdr_clk_disable,
+};
+
+static const struct mtk_ddp_comp_funcs _merge = {
+	.clk_enable = mtk_merge_clk_enable,
+	.clk_disable = mtk_merge_clk_disable,
+};
+
+static const struct mtk_ddp_comp_funcs _rdma = {
+	.clk_enable = mtk_mdp_rdma_clk_enable,
+	.clk_disable = mtk_mdp_rdma_clk_disable,
+};
+
 static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
-	[OVL_ADAPTOR_ETHDR0] = { OVL_ADAPTOR_TYPE_ETHDR, DDP_COMPONENT_ETHDR_MIXER, 0 },
-	[OVL_ADAPTOR_MDP_RDMA0] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA0, 0 },
-	[OVL_ADAPTOR_MDP_RDMA1] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA1, 1 },
-	[OVL_ADAPTOR_MDP_RDMA2] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA2, 2 },
-	[OVL_ADAPTOR_MDP_RDMA3] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA3, 3 },
-	[OVL_ADAPTOR_MDP_RDMA4] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA4, 4 },
-	[OVL_ADAPTOR_MDP_RDMA5] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA5, 5 },
-	[OVL_ADAPTOR_MDP_RDMA6] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA6, 6 },
-	[OVL_ADAPTOR_MDP_RDMA7] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA7, 7 },
-	[OVL_ADAPTOR_MERGE0] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE1, 1 },
-	[OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE2, 2 },
-	[OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE3, 3 },
-	[OVL_ADAPTOR_MERGE3] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE4, 4 },
+	[OVL_ADAPTOR_ETHDR0] = { OVL_ADAPTOR_TYPE_ETHDR, DDP_COMPONENT_ETHDR_MIXER, 0, &_ethdr },
+	[OVL_ADAPTOR_MDP_RDMA0] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA0, 0, &_rdma },
+	[OVL_ADAPTOR_MDP_RDMA1] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA1, 1, &_rdma },
+	[OVL_ADAPTOR_MDP_RDMA2] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA2, 2, &_rdma },
+	[OVL_ADAPTOR_MDP_RDMA3] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA3, 3, &_rdma },
+	[OVL_ADAPTOR_MDP_RDMA4] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA4, 4, &_rdma },
+	[OVL_ADAPTOR_MDP_RDMA5] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA5, 5, &_rdma },
+	[OVL_ADAPTOR_MDP_RDMA6] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA6, 6, &_rdma },
+	[OVL_ADAPTOR_MDP_RDMA7] = { OVL_ADAPTOR_TYPE_MDP_RDMA, DDP_COMPONENT_MDP_RDMA7, 7, &_rdma },
+	[OVL_ADAPTOR_MERGE0] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE1, 1, &_merge },
+	[OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE2, 2, &_merge },
+	[OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE3, 3, &_merge },
+	[OVL_ADAPTOR_MERGE3] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE4, 4, &_merge },
 };
 
 void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
@@ -187,73 +203,34 @@ void mtk_ovl_adaptor_stop(struct device *dev)
 
 int mtk_ovl_adaptor_clk_enable(struct device *dev)
 {
-	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
-	struct device *comp;
-	int ret;
 	int i;
-
-	for (i = 0; i < OVL_ADAPTOR_MERGE0; i++) {
-		comp = ovl_adaptor->ovl_adaptor_comp[i];
-		ret = pm_runtime_get_sync(comp);
-		if (ret < 0) {
-			dev_err(dev, "Failed to enable power domain %d, err %d\n", i, ret);
-			goto pwr_err;
-		}
-	}
+	int ret;
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
 
 	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
-		comp = ovl_adaptor->ovl_adaptor_comp[i];
-
-		if (i < OVL_ADAPTOR_MERGE0)
-			ret = mtk_mdp_rdma_clk_enable(comp);
-		else if (i < OVL_ADAPTOR_ETHDR0)
-			ret = mtk_merge_clk_enable(comp);
-		else
-			ret = mtk_ethdr_clk_enable(comp);
+		dev = ovl_adaptor->ovl_adaptor_comp[i];
+		if (!dev)
+			continue;
+		ret = comp_matches[i].funcs->clk_enable(dev);
 		if (ret) {
-			dev_err(dev, "Failed to enable clock %d, err %d\n", i, ret);
-			goto clk_err;
+			while (--i >= 0)
+				comp_matches[i].funcs->clk_disable(dev);
+			return ret;
 		}
 	}
-
-	return ret;
-
-clk_err:
-	while (--i >= 0) {
-		comp = ovl_adaptor->ovl_adaptor_comp[i];
-		if (i < OVL_ADAPTOR_MERGE0)
-			mtk_mdp_rdma_clk_disable(comp);
-		else if (i < OVL_ADAPTOR_ETHDR0)
-			mtk_merge_clk_disable(comp);
-		else
-			mtk_ethdr_clk_disable(comp);
-	}
-	i = OVL_ADAPTOR_MERGE0;
-
-pwr_err:
-	while (--i >= 0)
-		pm_runtime_put(ovl_adaptor->ovl_adaptor_comp[i]);
-
-	return ret;
+	return 0;
 }
 
 void mtk_ovl_adaptor_clk_disable(struct device *dev)
 {
-	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
-	struct device *comp;
 	int i;
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
 
 	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
-		comp = ovl_adaptor->ovl_adaptor_comp[i];
-
-		if (i < OVL_ADAPTOR_MERGE0) {
-			mtk_mdp_rdma_clk_disable(comp);
-			pm_runtime_put(comp);
-		} else if (i < OVL_ADAPTOR_ETHDR0) {
-			mtk_merge_clk_disable(comp);
-		} else {
-			mtk_ethdr_clk_disable(comp);
-		}
+		dev = ovl_adaptor->ovl_adaptor_comp[i];
+		if (!dev)
+			continue;
+		comp_matches[i].funcs->clk_disable(dev);
 	}
 }
 
-- 
2.18.0

[PATCH v7 16/23] drm/mediatek: Start/Stop components with function pointers

[Hsiao Chien Sung]

By registering component related functions to the pointers,
we can easily manage them within a for-loop and simplify the
logic of component start/stop process.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 20 +++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 84133303a6ec..812a1df9732f 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -72,6 +72,8 @@ static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
 static const struct mtk_ddp_comp_funcs _ethdr = {
 	.clk_enable = mtk_ethdr_clk_enable,
 	.clk_disable = mtk_ethdr_clk_disable,
+	.start = mtk_ethdr_start,
+	.stop = mtk_ethdr_stop,
 };
 
 static const struct mtk_ddp_comp_funcs _merge = {
@@ -189,16 +191,30 @@ void mtk_ovl_adaptor_config(struct device *dev, unsigned int w,
 
 void mtk_ovl_adaptor_start(struct device *dev)
 {
+	int i;
 	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
 
-	mtk_ethdr_start(ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0]);
+	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
+		if (!ovl_adaptor->ovl_adaptor_comp[i] ||
+		    !comp_matches[i].funcs->start)
+			continue;
+
+		comp_matches[i].funcs->start(ovl_adaptor->ovl_adaptor_comp[i]);
+	}
 }
 
 void mtk_ovl_adaptor_stop(struct device *dev)
 {
+	int i;
 	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
 
-	mtk_ethdr_stop(ovl_adaptor->ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0]);
+	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
+		if (!ovl_adaptor->ovl_adaptor_comp[i] ||
+		    !comp_matches[i].funcs->stop)
+			continue;
+
+		comp_matches[i].funcs->stop(ovl_adaptor->ovl_adaptor_comp[i]);
+	}
 }
 
 int mtk_ovl_adaptor_clk_enable(struct device *dev)
-- 
2.18.0

Re: [PATCH v7 16/23] drm/mediatek: Start/Stop components with function pointers

[CK Hu (胡俊光)]

Hi, Hsiao-chien:

On Fri, 2023-10-06 at 15:38 +0800, Hsiao Chien Sung wrote:
> By registering component related functions to the pointers,
> we can easily manage them within a for-loop and simplify the
> logic of component start/stop process.

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> ---
>  .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 20
> +++++++++++++++++--
>  1 file changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> index 84133303a6ec..812a1df9732f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> @@ -72,6 +72,8 @@ static const char * const
> private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
>  static const struct mtk_ddp_comp_funcs _ethdr = {
>  	.clk_enable = mtk_ethdr_clk_enable,
>  	.clk_disable = mtk_ethdr_clk_disable,
> +	.start = mtk_ethdr_start,
> +	.stop = mtk_ethdr_stop,
>  };
>  
>  static const struct mtk_ddp_comp_funcs _merge = {
> @@ -189,16 +191,30 @@ void mtk_ovl_adaptor_config(struct device *dev,
> unsigned int w,
>  
>  void mtk_ovl_adaptor_start(struct device *dev)
>  {
> +	int i;
>  	struct mtk_disp_ovl_adaptor *ovl_adaptor =
> dev_get_drvdata(dev);
>  
> -	mtk_ethdr_start(ovl_adaptor-
> >ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0]);
> +	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
> +		if (!ovl_adaptor->ovl_adaptor_comp[i] ||
> +		    !comp_matches[i].funcs->start)
> +			continue;
> +
> +		comp_matches[i].funcs->start(ovl_adaptor-
> >ovl_adaptor_comp[i]);
> +	}
>  }
>  
>  void mtk_ovl_adaptor_stop(struct device *dev)
>  {
> +	int i;
>  	struct mtk_disp_ovl_adaptor *ovl_adaptor =
> dev_get_drvdata(dev);
>  
> -	mtk_ethdr_stop(ovl_adaptor-
> >ovl_adaptor_comp[OVL_ADAPTOR_ETHDR0]);
> +	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
> +		if (!ovl_adaptor->ovl_adaptor_comp[i] ||
> +		    !comp_matches[i].funcs->stop)
> +			continue;
> +
> +		comp_matches[i].funcs->stop(ovl_adaptor-
> >ovl_adaptor_comp[i]);
> +	}
>  }
>  
>  int mtk_ovl_adaptor_clk_enable(struct device *dev)

[PATCH v7 17/23] drm/mediatek: Support MT8188 Padding in display driver

[Hsiao Chien Sung]

Padding is a new display module on MT8188, it provides ability
to add pixels to width and height of a layer with specified colors.

Due to hardware design, Mixer in VDOSYS1 requires width of a layer
to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
we need Padding to deal with odd width.

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/Makefile       |   3 +-
 drivers/gpu/drm/mediatek/mtk_disp_drv.h |   3 +
 drivers/gpu/drm/mediatek/mtk_drm_drv.c  |   1 +
 drivers/gpu/drm/mediatek/mtk_drm_drv.h  |   2 +-
 drivers/gpu/drm/mediatek/mtk_padding.c  | 206 ++++++++++++++++++++++++
 5 files changed, 213 insertions(+), 2 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_padding.c

diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
index d4d193f60271..5e4436403b8d 100644
--- a/drivers/gpu/drm/mediatek/Makefile
+++ b/drivers/gpu/drm/mediatek/Makefile
@@ -16,7 +16,8 @@ mediatek-drm-y := mtk_disp_aal.o \
 		  mtk_dsi.o \
 		  mtk_dpi.o \
 		  mtk_ethdr.o \
-		  mtk_mdp_rdma.o
+		  mtk_mdp_rdma.o \
+		  mtk_padding.o
 
 obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
 
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
index 2254038519e1..f9fdb1268aa5 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
@@ -157,4 +157,7 @@ void mtk_mdp_rdma_config(struct device *dev, struct mtk_mdp_rdma_cfg *cfg,
 const u32 *mtk_mdp_rdma_get_formats(struct device *dev);
 size_t mtk_mdp_rdma_get_num_formats(struct device *dev);
 
+int mtk_padding_clk_enable(struct device *dev);
+void mtk_padding_clk_disable(struct device *dev);
+void mtk_padding_config(struct device *dev, struct cmdq_pkt *cmdq_pkt);
 #endif
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 93552d76b6e7..cde69f39a066 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -973,6 +973,7 @@ static struct platform_driver * const mtk_drm_drivers[] = {
 	&mtk_dsi_driver,
 	&mtk_ethdr_driver,
 	&mtk_mdp_rdma_driver,
+	&mtk_padding_driver,
 };
 
 static int __init mtk_drm_init(void)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
index eb2fd45941f0..562f2db47add 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
@@ -64,5 +64,5 @@ extern struct platform_driver mtk_dpi_driver;
 extern struct platform_driver mtk_dsi_driver;
 extern struct platform_driver mtk_ethdr_driver;
 extern struct platform_driver mtk_mdp_rdma_driver;
-
+extern struct platform_driver mtk_padding_driver;
 #endif /* MTK_DRM_DRV_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_padding.c b/drivers/gpu/drm/mediatek/mtk_padding.c
new file mode 100644
index 000000000000..2a29a5fa0a68
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_padding.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2023 MediaTek Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/component.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/soc/mediatek/mtk-cmdq.h>
+
+#include "mtk_disp_drv.h"
+#include "mtk_drm_crtc.h"
+#include "mtk_drm_ddp_comp.h"
+
+#define PADDING_CONTROL_REG	0x00
+#define PADDING_BYPASS			BIT(0)
+#define PADDING_ENABLE			BIT(1)
+#define PADDING_PIC_SIZE_REG	0x04
+#define PADDING_H_REG		0x08 /* horizontal */
+#define PADDING_V_REG		0x0c /* vertical */
+#define PADDING_COLOR_REG	0x10
+
+#define PADDING_PIC_SIZE(w, h) (	\
+	((w) & GENMASK(15, 0)) |	\
+	(((h) & GENMASK(15, 0)) >> 16)	\
+)
+
+#define PADDING_H(right) (((right) & GENMASK(12, 0)) >> 16)
+
+#define PADDING_V(bottom) (((bottom) & GENMASK(12, 0)) >> 16)
+
+/* 10-bit RGB without alpha */
+#define PADDING_COLOR(r, g, b) (	\
+	((r) & GENMASK(9, 0)) << 22 |	\
+	((g) & GENMASK(9, 0)) << 12 |	\
+	((b) & GENMASK(9, 0)) << 2	\
+)
+
+/**
+ * struct mtk_padding - basic information of Padding
+ * @clk: Clock of the module
+ * @reg: Virtual address of the Padding for CPU to access
+ * @cmdq_reg: CMDQ setting of the Padding
+ *
+ * Every Padding should have different clock source, register base, and
+ * CMDQ settings, we stored these differences all together.
+ */
+struct mtk_padding {
+	struct clk		*clk;
+	void __iomem		*reg;
+	struct cmdq_client_reg	cmdq_reg;
+};
+
+int mtk_padding_clk_enable(struct device *dev)
+{
+	struct mtk_padding *padding = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(padding->clk);
+}
+
+void mtk_padding_clk_disable(struct device *dev)
+{
+	struct mtk_padding *padding = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(padding->clk);
+}
+
+void mtk_padding_start(struct device *dev)
+{
+	struct mtk_padding *padding = dev_get_drvdata(dev);
+
+	writel(PADDING_ENABLE | PADDING_BYPASS,
+	       padding->reg + PADDING_CONTROL_REG);
+
+	/*
+	 * notice that even the padding is in bypass mode,
+	 * all the settings must be cleared to 0 or
+	 * undefined behaviors could happen
+	 */
+	writel(0, padding->reg + PADDING_PIC_SIZE_REG);
+	writel(0, padding->reg + PADDING_H_REG);
+	writel(0, padding->reg + PADDING_V_REG);
+	writel(0, padding->reg + PADDING_COLOR_REG);
+}
+
+void mtk_padding_stop(struct device *dev)
+{
+	struct mtk_padding *padding = dev_get_drvdata(dev);
+
+	writel_relaxed(0, padding->reg + PADDING_CONTROL_REG);
+}
+
+void mtk_padding_config(struct device *dev, struct cmdq_pkt *cmdq_pkt,
+			u32 width, u32 height, u32 right, u32 bottom, u32 color)
+{
+	bool bypass = true;
+	struct mtk_padding *padding = dev_get_drvdata(dev);
+
+	if (width | height | right | bottom | color)
+		bypass = false;
+
+	mtk_ddp_write_mask(cmdq_pkt, bypass,
+			   &padding->cmdq_reg, padding->reg,
+			   PADDING_CONTROL_REG, PADDING_BYPASS);
+
+	mtk_ddp_write_mask(cmdq_pkt, PADDING_PIC_SIZE(width, height),
+			   &padding->cmdq_reg, padding->reg,
+			   PADDING_PIC_SIZE_REG, GENMASK(31, 0));
+
+	mtk_ddp_write_mask(cmdq_pkt, PADDING_H(right),
+			   &padding->cmdq_reg, padding->reg,
+			   PADDING_H_REG, GENMASK(31, 0));
+
+	mtk_ddp_write_mask(cmdq_pkt, PADDING_V(bottom),
+			   &padding->cmdq_reg, padding->reg,
+			   PADDING_V_REG, GENMASK(31, 0));
+
+	mtk_ddp_write_mask(cmdq_pkt, PADDING_V(bottom),
+			   &padding->cmdq_reg, padding->reg,
+			   PADDING_V_REG, GENMASK(31, 0));
+}
+
+static int mtk_padding_bind(struct device *dev, struct device *master, void *data)
+{
+	return 0;
+}
+
+static void mtk_padding_unbind(struct device *dev, struct device *master, void *data)
+{
+}
+
+static const struct component_ops mtk_padding_component_ops = {
+	.bind	= mtk_padding_bind,
+	.unbind = mtk_padding_unbind,
+};
+
+static int mtk_padding_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_padding *priv;
+	struct resource *res;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(priv->clk)) {
+		dev_err(dev, "failed to get clk\n");
+		return PTR_ERR(priv->clk);
+	}
+
+	priv->reg = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(priv->reg)) {
+		dev_err(dev, "failed to do ioremap\n");
+		return PTR_ERR(priv->reg);
+	}
+
+#if IS_REACHABLE(CONFIG_MTK_CMDQ)
+	ret = cmdq_dev_get_client_reg(dev, &priv->cmdq_reg, 0);
+	if (ret) {
+		dev_err(dev, "failed to get gce client reg\n");
+		return ret;
+	}
+#endif
+
+	platform_set_drvdata(pdev, priv);
+
+	ret = devm_pm_runtime_enable(dev);
+	if (ret)
+		return ret;
+
+	ret = component_add(dev, &mtk_padding_component_ops);
+	if (ret) {
+		pm_runtime_disable(dev);
+		return dev_err_probe(dev, ret, "failed to add component\n");
+	}
+
+	return 0;
+}
+
+static int mtk_padding_remove(struct platform_device *pdev)
+{
+	component_del(&pdev->dev, &mtk_padding_component_ops);
+	return 0;
+}
+
+static const struct of_device_id mtk_padding_driver_dt_match[] = {
+	{ .compatible = "mediatek,mt8188-padding" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mtk_padding_driver_dt_match);
+
+struct platform_driver mtk_padding_driver = {
+	.probe		= mtk_padding_probe,
+	.remove		= mtk_padding_remove,
+	.driver		= {
+		.name	= "mediatek-padding",
+		.owner	= THIS_MODULE,
+		.of_match_table = mtk_padding_driver_dt_match,
+	},
+};
-- 
2.18.0

Re: [PATCH v7 17/23] drm/mediatek: Support MT8188 Padding in display driver

[CK Hu (胡俊光)]

Hi, Hsiao-chien:

On Fri, 2023-10-06 at 15:38 +0800, Hsiao Chien Sung wrote:
> Padding is a new display module on MT8188, it provides ability
> to add pixels to width and height of a layer with specified colors.
> 
> Due to hardware design, Mixer in VDOSYS1 requires width of a layer
> to be 2-pixel-align, or 4-pixel-align when ETHDR is enabled,
> we need Padding to deal with odd width.
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/Makefile       |   3 +-
>  drivers/gpu/drm/mediatek/mtk_disp_drv.h |   3 +
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c  |   1 +
>  drivers/gpu/drm/mediatek/mtk_drm_drv.h  |   2 +-
>  drivers/gpu/drm/mediatek/mtk_padding.c  | 206
> ++++++++++++++++++++++++
>  5 files changed, 213 insertions(+), 2 deletions(-)
>  create mode 100644 drivers/gpu/drm/mediatek/mtk_padding.c
> 
> diff --git a/drivers/gpu/drm/mediatek/Makefile
> b/drivers/gpu/drm/mediatek/Makefile
> index d4d193f60271..5e4436403b8d 100644
> --- a/drivers/gpu/drm/mediatek/Makefile
> +++ b/drivers/gpu/drm/mediatek/Makefile
> @@ -16,7 +16,8 @@ mediatek-drm-y := mtk_disp_aal.o \
>  		  mtk_dsi.o \
>  		  mtk_dpi.o \
>  		  mtk_ethdr.o \
> -		  mtk_mdp_rdma.o
> +		  mtk_mdp_rdma.o \
> +		  mtk_padding.o
>  
>  obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
>  
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> index 2254038519e1..f9fdb1268aa5 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> @@ -157,4 +157,7 @@ void mtk_mdp_rdma_config(struct device *dev,
> struct mtk_mdp_rdma_cfg *cfg,
>  const u32 *mtk_mdp_rdma_get_formats(struct device *dev);
>  size_t mtk_mdp_rdma_get_num_formats(struct device *dev);
>  
> +int mtk_padding_clk_enable(struct device *dev);
> +void mtk_padding_clk_disable(struct device *dev);
> +void mtk_padding_config(struct device *dev, struct cmdq_pkt
> *cmdq_pkt);
>  #endif
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 93552d76b6e7..cde69f39a066 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -973,6 +973,7 @@ static struct platform_driver * const
> mtk_drm_drivers[] = {
>  	&mtk_dsi_driver,
>  	&mtk_ethdr_driver,
>  	&mtk_mdp_rdma_driver,
> +	&mtk_padding_driver,
>  };
>  
>  static int __init mtk_drm_init(void)
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> index eb2fd45941f0..562f2db47add 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
> @@ -64,5 +64,5 @@ extern struct platform_driver mtk_dpi_driver;
>  extern struct platform_driver mtk_dsi_driver;
>  extern struct platform_driver mtk_ethdr_driver;
>  extern struct platform_driver mtk_mdp_rdma_driver;
> -
> +extern struct platform_driver mtk_padding_driver;
>  #endif /* MTK_DRM_DRV_H */
> diff --git a/drivers/gpu/drm/mediatek/mtk_padding.c
> b/drivers/gpu/drm/mediatek/mtk_padding.c
> new file mode 100644
> index 000000000000..2a29a5fa0a68
> --- /dev/null
> +++ b/drivers/gpu/drm/mediatek/mtk_padding.c
> @@ -0,0 +1,206 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2023 MediaTek Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/component.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/soc/mediatek/mtk-cmdq.h>
> +
> +#include "mtk_disp_drv.h"
> +#include "mtk_drm_crtc.h"
> +#include "mtk_drm_ddp_comp.h"
> +
> +#define PADDING_CONTROL_REG	0x00
> +#define PADDING_BYPASS			BIT(0)
> +#define PADDING_ENABLE			BIT(1)
> +#define PADDING_PIC_SIZE_REG	0x04
> +#define PADDING_H_REG		0x08 /* horizontal */
> +#define PADDING_V_REG		0x0c /* vertical */
> +#define PADDING_COLOR_REG	0x10
> +
> +#define PADDING_PIC_SIZE(w, h) (	\
> +	((w) & GENMASK(15, 0)) |	\
> +	(((h) & GENMASK(15, 0)) >> 16)	\
> +)
> +
> +#define PADDING_H(right) (((right) & GENMASK(12, 0)) >> 16)
> +
> +#define PADDING_V(bottom) (((bottom) & GENMASK(12, 0)) >> 16)
> +
> +/* 10-bit RGB without alpha */
> +#define PADDING_COLOR(r, g, b) (	\
> +	((r) & GENMASK(9, 0)) << 22 |	\
> +	((g) & GENMASK(9, 0)) << 12 |	\
> +	((b) & GENMASK(9, 0)) << 2	\
> +)
> +
> +/**
> + * struct mtk_padding - basic information of Padding
> + * @clk: Clock of the module
> + * @reg: Virtual address of the Padding for CPU to access
> + * @cmdq_reg: CMDQ setting of the Padding
> + *
> + * Every Padding should have different clock source, register base,
> and
> + * CMDQ settings, we stored these differences all together.
> + */
> +struct mtk_padding {
> +	struct clk		*clk;
> +	void __iomem		*reg;
> +	struct cmdq_client_reg	cmdq_reg;
> +};
> +
> +int mtk_padding_clk_enable(struct device *dev)
> +{
> +	struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> +	return clk_prepare_enable(padding->clk);
> +}
> +
> +void mtk_padding_clk_disable(struct device *dev)
> +{
> +	struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(padding->clk);
> +}
> +
> +void mtk_padding_start(struct device *dev)
> +{
> +	struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> +	writel(PADDING_ENABLE | PADDING_BYPASS,
> +	       padding->reg + PADDING_CONTROL_REG);
> +
> +	/*
> +	 * notice that even the padding is in bypass mode,
> +	 * all the settings must be cleared to 0 or
> +	 * undefined behaviors could happen
> +	 */
> +	writel(0, padding->reg + PADDING_PIC_SIZE_REG);
> +	writel(0, padding->reg + PADDING_H_REG);
> +	writel(0, padding->reg + PADDING_V_REG);
> +	writel(0, padding->reg + PADDING_COLOR_REG);
> +}
> +
> +void mtk_padding_stop(struct device *dev)
> +{
> +	struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> +	writel_relaxed(0, padding->reg + PADDING_CONTROL_REG);
> +}
> +
> +void mtk_padding_config(struct device *dev, struct cmdq_pkt
> *cmdq_pkt,
> +			u32 width, u32 height, u32 right, u32 bottom,
> u32 color)

mtk_padding_config() is useless, so drop it.

Regards,
CK

> +{
> +	bool bypass = true;
> +	struct mtk_padding *padding = dev_get_drvdata(dev);
> +
> +	if (width | height | right | bottom | color)
> +		bypass = false;
> +
> +	mtk_ddp_write_mask(cmdq_pkt, bypass,
> +			   &padding->cmdq_reg, padding->reg,
> +			   PADDING_CONTROL_REG, PADDING_BYPASS);
> +
> +	mtk_ddp_write_mask(cmdq_pkt, PADDING_PIC_SIZE(width, height),
> +			   &padding->cmdq_reg, padding->reg,
> +			   PADDING_PIC_SIZE_REG, GENMASK(31, 0));
> +
> +	mtk_ddp_write_mask(cmdq_pkt, PADDING_H(right),
> +			   &padding->cmdq_reg, padding->reg,
> +			   PADDING_H_REG, GENMASK(31, 0));
> +
> +	mtk_ddp_write_mask(cmdq_pkt, PADDING_V(bottom),
> +			   &padding->cmdq_reg, padding->reg,
> +			   PADDING_V_REG, GENMASK(31, 0));
> +
> +	mtk_ddp_write_mask(cmdq_pkt, PADDING_V(bottom),
> +			   &padding->cmdq_reg, padding->reg,
> +			   PADDING_V_REG, GENMASK(31, 0));
> +}
> +
> +static int mtk_padding_bind(struct device *dev, struct device
> *master, void *data)
> +{
> +	return 0;
> +}
> +
> +static void mtk_padding_unbind(struct device *dev, struct device
> *master, void *data)
> +{
> +}
> +
> +static const struct component_ops mtk_padding_component_ops = {
> +	.bind	= mtk_padding_bind,
> +	.unbind = mtk_padding_unbind,
> +};
> +
> +static int mtk_padding_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct mtk_padding *priv;
> +	struct resource *res;
> +	int ret;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(priv->clk)) {
> +		dev_err(dev, "failed to get clk\n");
> +		return PTR_ERR(priv->clk);
> +	}
> +
> +	priv->reg = devm_platform_get_and_ioremap_resource(pdev, 0,
> &res);
> +	if (IS_ERR(priv->reg)) {
> +		dev_err(dev, "failed to do ioremap\n");
> +		return PTR_ERR(priv->reg);
> +	}
> +
> +#if IS_REACHABLE(CONFIG_MTK_CMDQ)
> +	ret = cmdq_dev_get_client_reg(dev, &priv->cmdq_reg, 0);
> +	if (ret) {
> +		dev_err(dev, "failed to get gce client reg\n");
> +		return ret;
> +	}
> +#endif
> +
> +	platform_set_drvdata(pdev, priv);
> +
> +	ret = devm_pm_runtime_enable(dev);
> +	if (ret)
> +		return ret;
> +
> +	ret = component_add(dev, &mtk_padding_component_ops);
> +	if (ret) {
> +		pm_runtime_disable(dev);
> +		return dev_err_probe(dev, ret, "failed to add
> component\n");
> +	}
> +
> +	return 0;
> +}
> +
> +static int mtk_padding_remove(struct platform_device *pdev)
> +{
> +	component_del(&pdev->dev, &mtk_padding_component_ops);
> +	return 0;
> +}
> +
> +static const struct of_device_id mtk_padding_driver_dt_match[] = {
> +	{ .compatible = "mediatek,mt8188-padding" },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, mtk_padding_driver_dt_match);
> +
> +struct platform_driver mtk_padding_driver = {
> +	.probe		= mtk_padding_probe,
> +	.remove		= mtk_padding_remove,
> +	.driver		= {
> +		.name	= "mediatek-padding",
> +		.owner	= THIS_MODULE,
> +		.of_match_table = mtk_padding_driver_dt_match,
> +	},
> +};

[PATCH v7 18/23] drm/mediatek: Add Padding to OVL adaptor

[Hsiao Chien Sung]

Add MT8188 Padding to OVL adaptor to probe the driver.

Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_drv.h       |  5 +++-
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 26 +++++++++++++++++++
 2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
index f9fdb1268aa5..45b30a2fe11a 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
@@ -159,5 +159,8 @@ size_t mtk_mdp_rdma_get_num_formats(struct device *dev);
 
 int mtk_padding_clk_enable(struct device *dev);
 void mtk_padding_clk_disable(struct device *dev);
-void mtk_padding_config(struct device *dev, struct cmdq_pkt *cmdq_pkt);
+void mtk_padding_start(struct device *dev);
+void mtk_padding_stop(struct device *dev);
+void mtk_padding_config(struct device *dev, struct cmdq_pkt *cmdq_pkt,
+			u32 width, u32 height, u32 right, u32 bottom, u32 color);
 #endif
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index 812a1df9732f..c326a658dc63 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -30,6 +30,7 @@ enum mtk_ovl_adaptor_comp_type {
 	OVL_ADAPTOR_TYPE_ETHDR,
 	OVL_ADAPTOR_TYPE_MDP_RDMA,
 	OVL_ADAPTOR_TYPE_MERGE,
+	OVL_ADAPTOR_TYPE_PADDING,
 	OVL_ADAPTOR_TYPE_NUM,
 };
 
@@ -47,6 +48,14 @@ enum mtk_ovl_adaptor_comp_id {
 	OVL_ADAPTOR_MERGE1,
 	OVL_ADAPTOR_MERGE2,
 	OVL_ADAPTOR_MERGE3,
+	OVL_ADAPTOR_PADDING0,
+	OVL_ADAPTOR_PADDING1,
+	OVL_ADAPTOR_PADDING2,
+	OVL_ADAPTOR_PADDING3,
+	OVL_ADAPTOR_PADDING4,
+	OVL_ADAPTOR_PADDING5,
+	OVL_ADAPTOR_PADDING6,
+	OVL_ADAPTOR_PADDING7,
 	OVL_ADAPTOR_ID_MAX
 };
 
@@ -67,6 +76,7 @@ static const char * const private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
 	[OVL_ADAPTOR_TYPE_ETHDR]	= "ethdr",
 	[OVL_ADAPTOR_TYPE_MDP_RDMA]	= "vdo1-rdma",
 	[OVL_ADAPTOR_TYPE_MERGE]	= "merge",
+	[OVL_ADAPTOR_TYPE_PADDING]	= "padding",
 };
 
 static const struct mtk_ddp_comp_funcs _ethdr = {
@@ -81,6 +91,13 @@ static const struct mtk_ddp_comp_funcs _merge = {
 	.clk_disable = mtk_merge_clk_disable,
 };
 
+static const struct mtk_ddp_comp_funcs _padding = {
+	.clk_enable = mtk_padding_clk_enable,
+	.clk_disable = mtk_padding_clk_disable,
+	.start = mtk_padding_start,
+	.stop = mtk_padding_stop,
+};
+
 static const struct mtk_ddp_comp_funcs _rdma = {
 	.clk_enable = mtk_mdp_rdma_clk_enable,
 	.clk_disable = mtk_mdp_rdma_clk_disable,
@@ -100,6 +117,14 @@ static const struct ovl_adaptor_comp_match comp_matches[OVL_ADAPTOR_ID_MAX] = {
 	[OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE2, 2, &_merge },
 	[OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE3, 3, &_merge },
 	[OVL_ADAPTOR_MERGE3] = { OVL_ADAPTOR_TYPE_MERGE, DDP_COMPONENT_MERGE4, 4, &_merge },
+	[OVL_ADAPTOR_PADDING0] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING0, 0, &_padding },
+	[OVL_ADAPTOR_PADDING1] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING1, 1, &_padding },
+	[OVL_ADAPTOR_PADDING2] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING2, 2, &_padding },
+	[OVL_ADAPTOR_PADDING3] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING3, 3, &_padding },
+	[OVL_ADAPTOR_PADDING4] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING4, 4, &_padding },
+	[OVL_ADAPTOR_PADDING5] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING5, 5, &_padding },
+	[OVL_ADAPTOR_PADDING6] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING6, 6, &_padding },
+	[OVL_ADAPTOR_PADDING7] = { OVL_ADAPTOR_TYPE_PADDING, DDP_COMPONENT_PADDING7, 7, &_padding },
 };
 
 void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int idx,
@@ -370,6 +395,7 @@ static int ovl_adaptor_comp_get_id(struct device *dev, struct device_node *node,
 }
 
 static const struct of_device_id mtk_ovl_adaptor_comp_dt_ids[] = {
+	{ .compatible = "mediatek,mt8188-padding", .data = (void *)OVL_ADAPTOR_TYPE_PADDING },
 	{ .compatible = "mediatek,mt8195-disp-ethdr", .data = (void *)OVL_ADAPTOR_TYPE_ETHDR },
 	{ .compatible = "mediatek,mt8195-disp-merge", .data = (void *)OVL_ADAPTOR_TYPE_MERGE },
 	{ .compatible = "mediatek,mt8195-vdo1-rdma", .data = (void *)OVL_ADAPTOR_TYPE_MDP_RDMA },
-- 
2.18.0

Re: [PATCH v7 18/23] drm/mediatek: Add Padding to OVL adaptor

[CK Hu (胡俊光)]

Hi, Hsiao-chien:

On Fri, 2023-10-06 at 15:38 +0800, Hsiao Chien Sung wrote:
> Add MT8188 Padding to OVL adaptor to probe the driver.
> 
> Reviewed-by: CK Hu <ck.hu@mediatek.com>

Remove my reviewed-by tag.

> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_drv.h       |  5 +++-
>  .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 26
> +++++++++++++++++++
>  2 files changed, 30 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> index f9fdb1268aa5..45b30a2fe11a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> @@ -159,5 +159,8 @@ size_t mtk_mdp_rdma_get_num_formats(struct device
> *dev);
>  
>  int mtk_padding_clk_enable(struct device *dev);
>  void mtk_padding_clk_disable(struct device *dev);
> -void mtk_padding_config(struct device *dev, struct cmdq_pkt
> *cmdq_pkt);
> +void mtk_padding_start(struct device *dev);
> +void mtk_padding_stop(struct device *dev);

Move this to patch [17/23]

Regards,
CK

> +void mtk_padding_config(struct device *dev, struct cmdq_pkt
> *cmdq_pkt,
> +			u32 width, u32 height, u32 right, u32 bottom,
> u32 color);
>  #endif
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> index 812a1df9732f..c326a658dc63 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> @@ -30,6 +30,7 @@ enum mtk_ovl_adaptor_comp_type {
>  	OVL_ADAPTOR_TYPE_ETHDR,
>  	OVL_ADAPTOR_TYPE_MDP_RDMA,
>  	OVL_ADAPTOR_TYPE_MERGE,
> +	OVL_ADAPTOR_TYPE_PADDING,
>  	OVL_ADAPTOR_TYPE_NUM,
>  };
>  
> @@ -47,6 +48,14 @@ enum mtk_ovl_adaptor_comp_id {
>  	OVL_ADAPTOR_MERGE1,
>  	OVL_ADAPTOR_MERGE2,
>  	OVL_ADAPTOR_MERGE3,
> +	OVL_ADAPTOR_PADDING0,
> +	OVL_ADAPTOR_PADDING1,
> +	OVL_ADAPTOR_PADDING2,
> +	OVL_ADAPTOR_PADDING3,
> +	OVL_ADAPTOR_PADDING4,
> +	OVL_ADAPTOR_PADDING5,
> +	OVL_ADAPTOR_PADDING6,
> +	OVL_ADAPTOR_PADDING7,
>  	OVL_ADAPTOR_ID_MAX
>  };
>  
> @@ -67,6 +76,7 @@ static const char * const
> private_comp_stem[OVL_ADAPTOR_TYPE_NUM] = {
>  	[OVL_ADAPTOR_TYPE_ETHDR]	= "ethdr",
>  	[OVL_ADAPTOR_TYPE_MDP_RDMA]	= "vdo1-rdma",
>  	[OVL_ADAPTOR_TYPE_MERGE]	= "merge",
> +	[OVL_ADAPTOR_TYPE_PADDING]	= "padding",
>  };
>  
>  static const struct mtk_ddp_comp_funcs _ethdr = {
> @@ -81,6 +91,13 @@ static const struct mtk_ddp_comp_funcs _merge = {
>  	.clk_disable = mtk_merge_clk_disable,
>  };
>  
> +static const struct mtk_ddp_comp_funcs _padding = {
> +	.clk_enable = mtk_padding_clk_enable,
> +	.clk_disable = mtk_padding_clk_disable,
> +	.start = mtk_padding_start,
> +	.stop = mtk_padding_stop,
> +};
> +
>  static const struct mtk_ddp_comp_funcs _rdma = {
>  	.clk_enable = mtk_mdp_rdma_clk_enable,
>  	.clk_disable = mtk_mdp_rdma_clk_disable,
> @@ -100,6 +117,14 @@ static const struct ovl_adaptor_comp_match
> comp_matches[OVL_ADAPTOR_ID_MAX] = {
>  	[OVL_ADAPTOR_MERGE1] = { OVL_ADAPTOR_TYPE_MERGE,
> DDP_COMPONENT_MERGE2, 2, &_merge },
>  	[OVL_ADAPTOR_MERGE2] = { OVL_ADAPTOR_TYPE_MERGE,
> DDP_COMPONENT_MERGE3, 3, &_merge },
>  	[OVL_ADAPTOR_MERGE3] = { OVL_ADAPTOR_TYPE_MERGE,
> DDP_COMPONENT_MERGE4, 4, &_merge },
> +	[OVL_ADAPTOR_PADDING0] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING0, 0, &_padding },
> +	[OVL_ADAPTOR_PADDING1] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING1, 1, &_padding },
> +	[OVL_ADAPTOR_PADDING2] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING2, 2, &_padding },
> +	[OVL_ADAPTOR_PADDING3] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING3, 3, &_padding },
> +	[OVL_ADAPTOR_PADDING4] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING4, 4, &_padding },
> +	[OVL_ADAPTOR_PADDING5] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING5, 5, &_padding },
> +	[OVL_ADAPTOR_PADDING6] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING6, 6, &_padding },
> +	[OVL_ADAPTOR_PADDING7] = { OVL_ADAPTOR_TYPE_PADDING,
> DDP_COMPONENT_PADDING7, 7, &_padding },
>  };
>  
>  void mtk_ovl_adaptor_layer_config(struct device *dev, unsigned int
> idx,
> @@ -370,6 +395,7 @@ static int ovl_adaptor_comp_get_id(struct device
> *dev, struct device_node *node,
>  }
>  
>  static const struct of_device_id mtk_ovl_adaptor_comp_dt_ids[] = {
> +	{ .compatible = "mediatek,mt8188-padding", .data = (void
> *)OVL_ADAPTOR_TYPE_PADDING },
>  	{ .compatible = "mediatek,mt8195-disp-ethdr", .data = (void
> *)OVL_ADAPTOR_TYPE_ETHDR },
>  	{ .compatible = "mediatek,mt8195-disp-merge", .data = (void
> *)OVL_ADAPTOR_TYPE_MERGE },
>  	{ .compatible = "mediatek,mt8195-vdo1-rdma", .data = (void
> *)OVL_ADAPTOR_TYPE_MDP_RDMA },

[PATCH v7 19/23] drm/mediatek: Return error if MDP RDMA failed to enable the clock

[Hsiao Chien Sung]

Return the result of clk_prepare_enable() instead of
always returns 0.

Fixes: f8946e2b6bb2 ("drm/mediatek: Add display MDP RDMA support for MT8195")

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_mdp_rdma.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c b/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c
index c3adaeefd551..c7233d0ac210 100644
--- a/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c
@@ -246,8 +246,7 @@ int mtk_mdp_rdma_clk_enable(struct device *dev)
 {
 	struct mtk_mdp_rdma *rdma = dev_get_drvdata(dev);
 
-	clk_prepare_enable(rdma->clk);
-	return 0;
+	return clk_prepare_enable(rdma->clk);
 }
 
 void mtk_mdp_rdma_clk_disable(struct device *dev)
-- 
2.18.0

Re: [PATCH v7 19/23] drm/mediatek: Return error if MDP RDMA failed to enable the clock

[CK Hu (胡俊光)]

Hi, Hsiao-chien:

On Fri, 2023-10-06 at 15:38 +0800, Hsiao Chien Sung wrote:
> Return the result of clk_prepare_enable() instead of
> always returns 0.

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> 
> Fixes: f8946e2b6bb2 ("drm/mediatek: Add display MDP RDMA support for
> MT8195")
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_mdp_rdma.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c
> b/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c
> index c3adaeefd551..c7233d0ac210 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mdp_rdma.c
> @@ -246,8 +246,7 @@ int mtk_mdp_rdma_clk_enable(struct device *dev)
>  {
>  	struct mtk_mdp_rdma *rdma = dev_get_drvdata(dev);
>  
> -	clk_prepare_enable(rdma->clk);
> -	return 0;
> +	return clk_prepare_enable(rdma->clk);
>  }
>  
>  void mtk_mdp_rdma_clk_disable(struct device *dev)

[PATCH v7 20/23] drm/mediatek: Remove the redundant driver data for DPI

[Hsiao Chien Sung]

DPI input is in 1T2P mode on both MT8195 and MT8188.
Remove the redundant driver data to align the settings, or
the screen will glitch.

Fixes: 2847cd7e6403 ("drm/mediatek: Add mt8188 dpi compatibles and platform data")

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 2f931e4e2b60..bc073a6b367e 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -957,20 +957,6 @@ static const struct mtk_dpi_conf mt8186_conf = {
 	.csc_enable_bit = CSC_ENABLE,
 };
 
-static const struct mtk_dpi_conf mt8188_dpintf_conf = {
-	.cal_factor = mt8195_dpintf_calculate_factor,
-	.max_clock_khz = 600000,
-	.output_fmts = mt8195_output_fmts,
-	.num_output_fmts = ARRAY_SIZE(mt8195_output_fmts),
-	.pixels_per_iter = 4,
-	.input_2pixel = false,
-	.dimension_mask = DPINTF_HPW_MASK,
-	.hvsize_mask = DPINTF_HSIZE_MASK,
-	.channel_swap_shift = DPINTF_CH_SWAP,
-	.yuv422_en_bit = DPINTF_YUV422_EN,
-	.csc_enable_bit = DPINTF_CSC_ENABLE,
-};
-
 static const struct mtk_dpi_conf mt8192_conf = {
 	.cal_factor = mt8183_calculate_factor,
 	.reg_h_fre_con = 0xe0,
@@ -1094,7 +1080,7 @@ static const struct of_device_id mtk_dpi_of_ids[] = {
 	{ .compatible = "mediatek,mt8173-dpi", .data = &mt8173_conf },
 	{ .compatible = "mediatek,mt8183-dpi", .data = &mt8183_conf },
 	{ .compatible = "mediatek,mt8186-dpi", .data = &mt8186_conf },
-	{ .compatible = "mediatek,mt8188-dp-intf", .data = &mt8188_dpintf_conf },
+	{ .compatible = "mediatek,mt8188-dp-intf", .data = &mt8195_dpintf_conf },
 	{ .compatible = "mediatek,mt8192-dpi", .data = &mt8192_conf },
 	{ .compatible = "mediatek,mt8195-dp-intf", .data = &mt8195_dpintf_conf },
 	{ /* sentinel */ },
-- 
2.18.0

Re: [PATCH v7 20/23] drm/mediatek: Remove the redundant driver data for DPI

[CK Hu (胡俊光)]

Hi, Hsiao-chien:

On Fri, 2023-10-06 at 15:38 +0800, Hsiao Chien Sung wrote:
> DPI input is in 1T2P mode on both MT8195 and MT8188.
> Remove the redundant driver data to align the settings, or
> the screen will glitch.

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> 
> Fixes: 2847cd7e6403 ("drm/mediatek: Add mt8188 dpi compatibles and
> platform data")
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 16 +---------------
>  1 file changed, 1 insertion(+), 15 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 2f931e4e2b60..bc073a6b367e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -957,20 +957,6 @@ static const struct mtk_dpi_conf mt8186_conf = {
>  	.csc_enable_bit = CSC_ENABLE,
>  };
>  
> -static const struct mtk_dpi_conf mt8188_dpintf_conf = {
> -	.cal_factor = mt8195_dpintf_calculate_factor,
> -	.max_clock_khz = 600000,
> -	.output_fmts = mt8195_output_fmts,
> -	.num_output_fmts = ARRAY_SIZE(mt8195_output_fmts),
> -	.pixels_per_iter = 4,
> -	.input_2pixel = false,
> -	.dimension_mask = DPINTF_HPW_MASK,
> -	.hvsize_mask = DPINTF_HSIZE_MASK,
> -	.channel_swap_shift = DPINTF_CH_SWAP,
> -	.yuv422_en_bit = DPINTF_YUV422_EN,
> -	.csc_enable_bit = DPINTF_CSC_ENABLE,
> -};
> -
>  static const struct mtk_dpi_conf mt8192_conf = {
>  	.cal_factor = mt8183_calculate_factor,
>  	.reg_h_fre_con = 0xe0,
> @@ -1094,7 +1080,7 @@ static const struct of_device_id
> mtk_dpi_of_ids[] = {
>  	{ .compatible = "mediatek,mt8173-dpi", .data = &mt8173_conf },
>  	{ .compatible = "mediatek,mt8183-dpi", .data = &mt8183_conf },
>  	{ .compatible = "mediatek,mt8186-dpi", .data = &mt8186_conf },
> -	{ .compatible = "mediatek,mt8188-dp-intf", .data =
> &mt8188_dpintf_conf },
> +	{ .compatible = "mediatek,mt8188-dp-intf", .data =
> &mt8195_dpintf_conf },
>  	{ .compatible = "mediatek,mt8192-dpi", .data = &mt8192_conf },
>  	{ .compatible = "mediatek,mt8195-dp-intf", .data =
> &mt8195_dpintf_conf },
>  	{ /* sentinel */ },

[PATCH v7 21/23] drm/mediatek: Fix underrun in VDO1 when switches off the layer

[Hsiao Chien Sung]

Do not reset Merge while using CMDQ because it doesn't wait for
frame done event as CMDQ does and could lead to underrun when
the layer is switching off.

Fixes: aaf94f7c3ae6 ("drm/mediatek: Add display merge async reset control")

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_merge.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_merge.c b/drivers/gpu/drm/mediatek/mtk_disp_merge.c
index e525a6b9e5b0..22f768d923d5 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_merge.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_merge.c
@@ -103,7 +103,7 @@ void mtk_merge_stop_cmdq(struct device *dev, struct cmdq_pkt *cmdq_pkt)
 	mtk_ddp_write(cmdq_pkt, 0, &priv->cmdq_reg, priv->regs,
 		      DISP_REG_MERGE_CTRL);
 
-	if (priv->async_clk)
+	if (!cmdq_pkt && priv->async_clk)
 		reset_control_reset(priv->reset_ctl);
 }
 
-- 
2.18.0

[PATCH v7 22/23] drm/mediatek: Power on devices in OVL adaptor when atomic enable

[Hsiao Chien Sung]

Different from OVL, OVL adaptor is a pseudo device so we didn't
define it in the device tree, consequently, pm_runtime_resume_and_get()
called by .atomic_enable() powers on no device in OVL adaptor and
leads to power outage in the corresponding IOMMU.

To resolve the issue, we implement a function to power on the RDMAs
in OVL adaptor, and the system will make sure the IOMMU is powered on
as well because of the device link (iommus) in the RDMA nodes in DTS.

Fixes: 5db12f5d843b ("media: drm/mediatek: Add pm runtime support for ovl and rdma")

Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_disp_drv.h       |  1 +
 .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 49 +++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_crtc.c       |  9 ++++
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   |  1 +
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |  9 ++++
 5 files changed, 69 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
index 45b30a2fe11a..971d64261fb9 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
@@ -107,6 +107,7 @@ void mtk_ovl_adaptor_connect(struct device *dev, struct device *mmsys_dev,
 			     unsigned int next);
 void mtk_ovl_adaptor_disconnect(struct device *dev, struct device *mmsys_dev,
 				unsigned int next);
+int mtk_ovl_adaptor_power_on(struct device *dev);
 int mtk_ovl_adaptor_clk_enable(struct device *dev);
 void mtk_ovl_adaptor_clk_disable(struct device *dev);
 void mtk_ovl_adaptor_config(struct device *dev, unsigned int w,
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
index c326a658dc63..ae3b6ba655b1 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
@@ -242,6 +242,55 @@ void mtk_ovl_adaptor_stop(struct device *dev)
 	}
 }
 
+/**
+ * mtk_ovl_adaptor_power_on - Power on devices in OVL adaptor
+ * @dev: device to be powered on
+ *
+ * Different from OVL, OVL adaptor is a pseudo device so
+ * we didn't define it in the device tree, pm_runtime_resume_and_get()
+ * called by .atomic_enable() power on no device in OVL adaptor,
+ * we have to implement a function to do the job instead.
+ *
+ * returns:
+ * zero on success, errno on failure.
+ */
+int mtk_ovl_adaptor_power_on(struct device *dev)
+{
+	int i, ret;
+	struct device *comp;
+	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
+
+	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
+		comp = ovl_adaptor->ovl_adaptor_comp[i];
+
+		if (!comp)
+			continue;
+
+		if (comp_matches[i].type != OVL_ADAPTOR_TYPE_MDP_RDMA)
+			continue;
+
+		ret = pm_runtime_resume_and_get(comp);
+		if (ret < 0) {
+			dev_err(dev, "Failed to power on comp(%u): %d\n", i, ret);
+			goto error;
+		}
+	}
+	return 0;
+error:
+	while (--i >= 0) {
+		comp = ovl_adaptor->ovl_adaptor_comp[i];
+
+		if (!comp)
+			continue;
+
+		if (comp_matches[i].type != OVL_ADAPTOR_TYPE_MDP_RDMA)
+			continue;
+
+		pm_runtime_put(comp);
+	}
+	return ret;
+}
+
 int mtk_ovl_adaptor_clk_enable(struct device *dev)
 {
 	int i;
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
index b6fa4ad2f94d..5bd62027190b 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
@@ -364,6 +364,15 @@ static int mtk_crtc_ddp_hw_init(struct mtk_drm_crtc *mtk_crtc)
 		return ret;
 	}
 
+	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
+		ret = mtk_ddp_comp_power_on(mtk_crtc->ddp_comp[i]);
+		if (ret) {
+			DRM_ERROR("Failed to power on %s: %d\n",
+				  dev_name(mtk_crtc->ddp_comp[i]->dev), ret);
+			return ret;
+		}
+	}
+
 	ret = mtk_mutex_prepare(mtk_crtc->mutex);
 	if (ret < 0) {
 		DRM_ERROR("Failed to enable mutex clock: %d\n", ret);
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index 771f4e173353..e39860f2be78 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -394,6 +394,7 @@ static const struct mtk_ddp_comp_funcs ddp_ufoe = {
 };
 
 static const struct mtk_ddp_comp_funcs ddp_ovl_adaptor = {
+	.power_on = mtk_ovl_adaptor_power_on,
 	.clk_enable = mtk_ovl_adaptor_clk_enable,
 	.clk_disable = mtk_ovl_adaptor_clk_disable,
 	.config = mtk_ovl_adaptor_config,
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
index febcaeef16a1..4fef283f17d2 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
@@ -46,6 +46,7 @@ enum mtk_ddp_comp_type {
 struct mtk_ddp_comp;
 struct cmdq_pkt;
 struct mtk_ddp_comp_funcs {
+	int (*power_on)(struct device *dev);
 	int (*clk_enable)(struct device *dev);
 	void (*clk_disable)(struct device *dev);
 	void (*config)(struct device *dev, unsigned int w,
@@ -89,6 +90,14 @@ struct mtk_ddp_comp {
 	const struct mtk_ddp_comp_funcs *funcs;
 };
 
+static inline int mtk_ddp_comp_power_on(struct mtk_ddp_comp *comp)
+{
+	if (comp->funcs && comp->funcs->power_on)
+		return comp->funcs->power_on(comp->dev);
+
+	return 0;
+}
+
 static inline int mtk_ddp_comp_clk_enable(struct mtk_ddp_comp *comp)
 {
 	if (comp->funcs && comp->funcs->clk_enable)
-- 
2.18.0

Re: [PATCH v7 22/23] drm/mediatek: Power on devices in OVL adaptor when atomic enable

[CK Hu (胡俊光)]

Hi, Hsiao-chien:

On Fri, 2023-10-06 at 15:38 +0800, Hsiao Chien Sung wrote:
> Different from OVL, OVL adaptor is a pseudo device so we didn't
> define it in the device tree, consequently,
> pm_runtime_resume_and_get()
> called by .atomic_enable() powers on no device in OVL adaptor and
> leads to power outage in the corresponding IOMMU.
> 
> To resolve the issue, we implement a function to power on the RDMAs
> in OVL adaptor, and the system will make sure the IOMMU is powered on
> as well because of the device link (iommus) in the RDMA nodes in DTS.
> 
> Fixes: 5db12f5d843b ("media: drm/mediatek: Add pm runtime support for
> ovl and rdma")
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_drv.h       |  1 +
>  .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 49
> +++++++++++++++++++
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c       |  9 ++++
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   |  1 +
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |  9 ++++
>  5 files changed, 69 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> index 45b30a2fe11a..971d64261fb9 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> @@ -107,6 +107,7 @@ void mtk_ovl_adaptor_connect(struct device *dev,
> struct device *mmsys_dev,
>  			     unsigned int next);
>  void mtk_ovl_adaptor_disconnect(struct device *dev, struct device
> *mmsys_dev,
>  				unsigned int next);
> +int mtk_ovl_adaptor_power_on(struct device *dev);
>  int mtk_ovl_adaptor_clk_enable(struct device *dev);
>  void mtk_ovl_adaptor_clk_disable(struct device *dev);
>  void mtk_ovl_adaptor_config(struct device *dev, unsigned int w,
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> index c326a658dc63..ae3b6ba655b1 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> @@ -242,6 +242,55 @@ void mtk_ovl_adaptor_stop(struct device *dev)
>  	}
>  }
>  
> +/**
> + * mtk_ovl_adaptor_power_on - Power on devices in OVL adaptor
> + * @dev: device to be powered on
> + *
> + * Different from OVL, OVL adaptor is a pseudo device so
> + * we didn't define it in the device tree,
> pm_runtime_resume_and_get()
> + * called by .atomic_enable() power on no device in OVL adaptor,
> + * we have to implement a function to do the job instead.
> + *
> + * returns:
> + * zero on success, errno on failure.
> + */
> +int mtk_ovl_adaptor_power_on(struct device *dev)
> +{
> +	int i, ret;
> +	struct device *comp;
> +	struct mtk_disp_ovl_adaptor *ovl_adaptor =
> dev_get_drvdata(dev);
> +
> +	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
> +		comp = ovl_adaptor->ovl_adaptor_comp[i];
> +
> +		if (!comp)
> +			continue;
> +
> +		if (comp_matches[i].type != OVL_ADAPTOR_TYPE_MDP_RDMA)
> +			continue;
> +
> +		ret = pm_runtime_resume_and_get(comp);
> +		if (ret < 0) {
> +			dev_err(dev, "Failed to power on comp(%u):
> %d\n", i, ret);
> +			goto error;
> +		}
> +	}
> +	return 0;
> +error:
> +	while (--i >= 0) {
> +		comp = ovl_adaptor->ovl_adaptor_comp[i];
> +
> +		if (!comp)
> +			continue;
> +
> +		if (comp_matches[i].type != OVL_ADAPTOR_TYPE_MDP_RDMA)
> +			continue;
> +
> +		pm_runtime_put(comp);
> +	}
> +	return ret;
> +}
> +
>  int mtk_ovl_adaptor_clk_enable(struct device *dev)
>  {
>  	int i;
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index b6fa4ad2f94d..5bd62027190b 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -364,6 +364,15 @@ static int mtk_crtc_ddp_hw_init(struct
> mtk_drm_crtc *mtk_crtc)
>  		return ret;
>  	}
>  
> +	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
> +		ret = mtk_ddp_comp_power_on(mtk_crtc->ddp_comp[i]);
> +		if (ret) {
> +			DRM_ERROR("Failed to power on %s: %d\n",
> +				  dev_name(mtk_crtc->ddp_comp[i]->dev), 
> ret);
> +			return ret;
> +		}
> +	}

I would like to replace below statement in mtk_drm_crtc_atomic_enable()

ret = pm_runtime_resume_and_get(comp-dev);

with

ret = mtk_ddp_comp_power_on(comp);

And define mtk_ddp_comp_power_on() as

static inline int mtk_ddp_comp_power_on(struct mtk_ddp_comp *comp)
{
	if (comp->funcs && comp->funcs->power_on)
		return comp->funcs->power_on(comp->dev);
	else
		return pm_runtime_resume_and_get(comp-dev);
}

And you should also define mtk_ddp_comp_power_off().

Regards,
CK

> +
>  	ret = mtk_mutex_prepare(mtk_crtc->mutex);
>  	if (ret < 0) {
>  		DRM_ERROR("Failed to enable mutex clock: %d\n", ret);
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 771f4e173353..e39860f2be78 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -394,6 +394,7 @@ static const struct mtk_ddp_comp_funcs ddp_ufoe =
> {
>  };
>  
>  static const struct mtk_ddp_comp_funcs ddp_ovl_adaptor = {
> +	.power_on = mtk_ovl_adaptor_power_on,
>  	.clk_enable = mtk_ovl_adaptor_clk_enable,
>  	.clk_disable = mtk_ovl_adaptor_clk_disable,
>  	.config = mtk_ovl_adaptor_config,
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> index febcaeef16a1..4fef283f17d2 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> @@ -46,6 +46,7 @@ enum mtk_ddp_comp_type {
>  struct mtk_ddp_comp;
>  struct cmdq_pkt;
>  struct mtk_ddp_comp_funcs {
> +	int (*power_on)(struct device *dev);
>  	int (*clk_enable)(struct device *dev);
>  	void (*clk_disable)(struct device *dev);
>  	void (*config)(struct device *dev, unsigned int w,
> @@ -89,6 +90,14 @@ struct mtk_ddp_comp {
>  	const struct mtk_ddp_comp_funcs *funcs;
>  };
>  
> +static inline int mtk_ddp_comp_power_on(struct mtk_ddp_comp *comp)
> +{
> +	if (comp->funcs && comp->funcs->power_on)
> +		return comp->funcs->power_on(comp->dev);
> +
> +	return 0;
> +}
> +
>  static inline int mtk_ddp_comp_clk_enable(struct mtk_ddp_comp *comp)
>  {
>  	if (comp->funcs && comp->funcs->clk_enable)

[PATCH v7 23/23] drm/mediatek: Support MT8188 VDOSYS1 in display driver

[Hsiao Chien Sung]

- The mmsys_dev_num in MT8188 VDOSYS0 was set to 1 since
  VDOSYS1 was not available before. Increase it to support
  VDOSYS1 in display driver.
- Add compatible name for MT8188 VDOSYS1
  (shares the same driver data with MT8195 VDOSYS1)

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index cde69f39a066..212475436f47 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -288,6 +288,7 @@ static const struct mtk_mmsys_driver_data mt8186_mmsys_driver_data = {
 static const struct mtk_mmsys_driver_data mt8188_vdosys0_driver_data = {
 	.main_path = mt8188_mtk_ddp_main,
 	.main_len = ARRAY_SIZE(mt8188_mtk_ddp_main),
+	.mmsys_dev_num = 2,
 };
 
 static const struct mtk_mmsys_driver_data mt8192_mmsys_driver_data = {
@@ -328,6 +329,8 @@ static const struct of_device_id mtk_drm_of_ids[] = {
 	  .data = &mt8186_mmsys_driver_data},
 	{ .compatible = "mediatek,mt8188-vdosys0",
 	  .data = &mt8188_vdosys0_driver_data},
+	{ .compatible = "mediatek,mt8188-vdosys1",
+	  .data = &mt8195_vdosys1_driver_data},
 	{ .compatible = "mediatek,mt8192-mmsys",
 	  .data = &mt8192_mmsys_driver_data},
 	{ .compatible = "mediatek,mt8195-mmsys",
-- 
2.18.0