Re: [PATCH 5/5] arm64: dts: rockchip: rk3399-evb-ind: Add support for DisplayPort

[Krzysztof Kozlowski <krzk@kernel.org>]

On 15/07/2025 13:24, Chaoyi Chen wrote:
>  /dts-v1/;
> +#include <dt-bindings/usb/pd.h>
>  #include "rk3399.dtsi"
>  
>  / {
> @@ -19,6 +20,16 @@ chosen {
>  		stdout-path = "serial2:1500000n8";
>  	};
>  
> +	vbus_typec: vbus-typec-regulator {

use consistent naming. How other regulators are called? foo-regulator?

> +		compatible = "regulator-fixed";
> +		enable-active-high;
> +		gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&vcc5v0_typec0_en>;
> +		regulator-name = "vbus_typec";
> +		vin-supply = <&vcc5v0_sys>;
> +	};
> +
>  	vcc5v0_sys: regulator-vcc5v0-sys {
>  		compatible = "regulator-fixed";
>  		enable-active-high;
> @@ -29,6 +40,16 @@ vcc5v0_sys: regulator-vcc5v0-sys {
>  		regulator-max-microvolt = <5000000>;
>  		regulator-min-microvolt = <5000000>;
>  	};
> +
> +	sound: sound {
> +		compatible = "rockchip,rk3399-gru-sound";
> +		rockchip,cpu = <&i2s0 &spdif>;
> +	};
> +};
> +
> +&cdn_dp {
> +	status = "okay";
> +	phys = <&tcphy0_dp>;
>  };
>  
>  &cpu_b0 {
> @@ -341,6 +362,66 @@ regulator-state-mem {
>  	};
>  };
>  
> +&i2c4 {
> +	i2c-scl-rising-time-ns = <475>;
> +	i2c-scl-falling-time-ns = <26>;
> +	status = "okay";
> +
> +	usbc0: fusb302@22 {

Node names should be generic. See also an explanation and list of
examples (not exhaustive) in DT specification:
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation


> +		compatible = "fcs,fusb302";
> +		reg = <0x22>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usbc0_int>;
> +		vbus-supply = <&vbus_typec>;
> +		status = "okay";

Why? What disabled it?

> +
> +		usb_con: connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
Best regards,
Krzysztof