[PATCH 0/5] arm64: zynqmp: dtsi changes next

[PATCH 0/5] arm64: zynqmp: dtsi changes next

[Michal Simek]

Hi,

I have cherry-picked others patches from xilinx soc vendor tree which are
ready for submission.
This patchset targets zynqmp.dtsi and ep108 platform.

Thanks,
Michal


Alistair Francis (1):
  arm64: zynqmp: Use C pre-processor for includes

Michal Simek (2):
  arm64: zynqmp: Add fpd/lpd dmas
  arm64: zynqmp: Add missing mmc aliases in ep108

Naga Sureshkumar Relli (1):
  arm64: zynqmp: Enable can1 for ep108

VNSL Durga (1):
  arm64: zynqmp: Added clocks to DT for ep108

 arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi |  48 +++++++
 arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts      |  10 +-
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi           | 165 +++++++++++++++++++++++
 3 files changed, 221 insertions(+), 2 deletions(-)

-- 
1.9.1

[PATCH 1/5] arm64: zynqmp: Add fpd/lpd dmas

[Michal Simek]

Wire fpd and lpd dma channels to zynqmp.dtsi.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 165 +++++++++++++++++++++++++++++++++
 1 file changed, 165 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 787463796348..7665fbddff28 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -189,6 +189,171 @@
 			};
 		};
 
+		/* GDMA */
+		fpd_dma_chan1: dma@fd500000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd500000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 124 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan2: dma@fd510000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd510000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 125 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan3: dma@fd520000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd520000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 126 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan4: dma@fd530000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd530000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 127 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan5: dma@fd540000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd540000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 128 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan6: dma@fd550000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd550000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 129 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan7: dma@fd560000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd560000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 130 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		fpd_dma_chan8: dma@fd570000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xfd570000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 131 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <128>;
+		};
+
+		/* LPDDMA default allows only secured access. inorder to enable
+		 * These dma channels, Users should ensure that these dma
+		 * Channels are allowed for non secure access.
+		 */
+		lpd_dma_chan1: dma@ffa80000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffa80000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 77 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan2: dma@ffa90000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffa90000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 78 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan3: dma@ffaa0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffaa0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 79 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan4: dma@ffab0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffab0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 80 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan5: dma@ffac0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffac0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 81 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan6: dma@ffad0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffad0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 82 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan7: dma@ffae0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffae0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 83 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
+		lpd_dma_chan8: dma@ffaf0000 {
+			status = "disabled";
+			compatible = "xlnx,zynqmp-dma-1.0";
+			reg = <0x0 0xffaf0000 0x0 0x1000>;
+			interrupt-parent = <&gic>;
+			interrupts = <0 84 4>;
+			clock-names = "clk_main", "clk_apb";
+			xlnx,bus-width = <64>;
+		};
+
 		gem0: ethernet@ff0b0000 {
 			compatible = "cdns,gem";
 			status = "disabled";
-- 
1.9.1

[PATCH 2/5] arm64: zynqmp: Use C pre-processor for includes

[Michal Simek]

From: Alistair Francis <alistair.francis@xilinx.com>

Change the dtsi include code to use the C pre-processor #include instead
of the device tree /include/. This enables option to use dt binding
headers.

Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Sören Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index ee7fa27e1e23..fba8f049769b 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -13,8 +13,8 @@
 
 /dts-v1/;
 
-/include/ "zynqmp.dtsi"
-/include/ "zynqmp-ep108-clk.dtsi"
+#include "zynqmp.dtsi"
+#include "zynqmp-ep108-clk.dtsi"
 
 / {
 	model = "ZynqMP EP108";
-- 
1.9.1

[PATCH 3/5] arm64: zynqmp: Added clocks to DT for ep108

[Michal Simek]

From: VNSL Durga <vnsl.durga.challa-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>

Added clks for ep108 platform.

Signed-off-by: VNSL Durga <vnsldurg-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
---

 arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi | 44 ++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
index c03bde79d7d8..31d25327cfb9 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
@@ -29,12 +29,56 @@
 		#clock-cells = <0>;
 		clock-frequency = <75000000>;
 	};
+
+	clk100: clk100 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	clk600: clk600 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <600000000>;
+	};
 };
 
 &can0 {
 	clocks = <&misc_clk &misc_clk>;
 };
 
+&fpd_dma_chan1 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan2 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan3 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan4 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan5 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan6 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan7 {
+	clocks = <&clk600>, <&clk100>;
+};
+
+&fpd_dma_chan8 {
+	clocks = <&clk600>, <&clk100>;
+};
+
 &gem0 {
 	clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>;
 };
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 5/5] arm64: zynqmp: Add missing mmc aliases in ep108

[Michal Simek]

Add missing mmc aliases.

Signed-off-by: Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
---

 arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index 6a8b4b445531..150e1d1c35d8 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -20,6 +20,8 @@
 	model = "ZynqMP EP108";
 
 	aliases {
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
 		serial0 = &uart0;
 	};
 
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 4/5] arm64: zynqmp: Enable can1 for ep108

[Michal Simek]

From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>

This patch enables can1 for ep108.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi | 4 ++++
 arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts      | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
index 31d25327cfb9..b87b8316f4ac 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108-clk.dtsi
@@ -47,6 +47,10 @@
 	clocks = <&misc_clk &misc_clk>;
 };
 
+&can1 {
+	clocks = <&misc_clk &misc_clk>;
+};
+
 &fpd_dma_chan1 {
 	clocks = <&clk600>, <&clk100>;
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
index fba8f049769b..6a8b4b445531 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-ep108.dts
@@ -37,6 +37,10 @@
 	status = "okay";
 };
 
+&can1 {
+	status = "okay";
+};
+
 &gem0 {
 	status = "okay";
 	phy-handle = <&phy0>;
-- 
1.9.1