Re: [PATCH 9/9] arm64: dts: imx8mm-phygate: fix typo pinctrcl-0

Teresa Remmet
2024-08-06T08:21:22Z

Am Montag, dem 05.08.2024 um 11:49 -0400 schrieb Frank Li:
> Fix typo pinctrcl-0 with pinctrl-0.
> Fix below warning:
>
> arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtb:
> gpio@30220000: 'pinctrl-0' is a dependency of 'pinctrl-names'
>         from schema $id:
> http://devicetree.org/schemas/pinctrl/pinctrl-consumer.yaml#
> arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtb:
> uart4_rs485_en: $nodename:0: 'uart4_rs485_en' does not match '^(hog-
> [0-9]+|.+-hog(-[0-9]+)?)$
>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Reviewed-by: Teresa Remmet <t.remmet@phytec.de>

Thanks for fixing this.

Teresa

> ---
>  arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-
> rs232.dtso | 2 +-
>  arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-
> rs485.dtso | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-
> rs232-rs232.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-
> tauri-l-rs232-rs232.dtso
> index f246b0ba6af29..ce197266262a5 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-
> rs232.dtso
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-
> rs232.dtso
> @@ -22,7 +22,7 @@
>
>  &gpio3 {
>         pinctrl-names = "default";
> -       pinctrcl-0 = <&pinctrl_gpio3_hog>;
> +       pinctrl-0 = <&pinctrl_gpio3_hog>;
>
>         uart4_rs485_en {
>                 gpio-hog;
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-
> rs232-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-
> tauri-l-rs232-rs485.dtso
> index 67508ca14276f..f2a7811f1b9f2 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-
> rs485.dtso
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-
> rs485.dtso
> @@ -23,7 +23,7 @@
>
>  &gpio3 {
>         pinctrl-names = "default";
> -       pinctrcl-0 = <&pinctrl_gpio3_hog>;
> +       pinctrl-0 = <&pinctrl_gpio3_hog>;
>
>         uart4_rs485_en {
>                 gpio-hog;
>

--
PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, Germany

Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber,
Dipl.-Ing. (FH) Markus Lickes | Handelsregister Mainz HRB 4656 |
Finanzamt Mainz | St.Nr. 266500608, DE 149059855