Re: [PATCH v11 19/22] drm/mediatek: modify mediatek-drm for mt8195 multi mmsys support

Re: [PATCH v11 19/22] drm/mediatek: modify mediatek-drm for mt8195 multi mmsys support

[AngeloGioacchino Del Regno]

Il 10/01/22 09:46, Nancy.Lin ha scritto:
> MT8195 have two mmsys. Modify drm for MT8195 multi-mmsys support.
> The two mmsys (vdosys0 and vdosys1) will bring up two drm drivers,
> only one drm driver register as the drm device.
> Each drm driver binds its own component. The last bind drm driver
> allocates and registers the drm device to drm core.
> Each crtc path is created with the corresponding drm driver data.
> 
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>


Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v11 20/22] drm/mediatek: add drm ovl_adaptor sub driver for MT8195

[AngeloGioacchino Del Regno]

Il 10/01/22 09:46, Nancy.Lin ha scritto:
> Add drm ovl_adaptor sub driver. Bring up ovl_adaptor sub driver if
> the component exists in the path.
> 
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v11 21/22] drm/mediatek: add mediatek-drm of vdosys1 support for MT8195

[AngeloGioacchino Del Regno]

Il 10/01/22 09:46, Nancy.Lin ha scritto:
> Add driver data of mt8195 vdosys1 to mediatek-drm.
> 
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v11 09/22] soc: mediatek: change the mutex defines and the mutex_mod type

[AngeloGioacchino Del Regno]

Il 10/01/22 09:46, Nancy.Lin ha scritto:
> This is a preparation for adding support for mt8195 vdosys1 mutex.
> The vdosys1 path component contains ovl_adaptor, merge5,
> and dp_intf1. Ovl_adaptor is composed of several sub-elements,
> so change it to support multi-bit control.
> 
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v11 08/22] soc: mediatek: mmsys: modify reset controller for MT8195 vdosys1

[AngeloGioacchino Del Regno]

Il 10/01/22 09:46, Nancy.Lin ha scritto:
> MT8195 vdosys1 has more than 32 reset bits and a different reset base
> than other chips. Modify mmsys for support 64 bit and different reset
> base.
> 
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v11 10/22] soc: mediatek: add mtk-mutex support for mt8195 vdosys1

[AngeloGioacchino Del Regno]

Il 10/01/22 09:46, Nancy.Lin ha scritto:
> Add mtk-mutex support for mt8195 vdosys1.
> The vdosys1 path component contains ovl_adaptor, merge5,
> and dp_intf1. Ovl_adaptor is composed of several sub-elements.
> 
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v11 06/22] soc: mediatek: add mtk-mmsys config API for mt8195 vdosys1

[AngeloGioacchino Del Regno]

Il 10/01/22 09:46, Nancy.Lin ha scritto:
> Add mmsys config API. The config API is used for config mmsys reg.
> Some mmsys regs need to be setting according to the HW engine binding
> to the mmsys simultaneously.
> 
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v11 05/22] soc: mediatek: add mtk-mmsys support for mt8195 vdosys1

[AngeloGioacchino Del Regno]

Il 10/01/22 09:46, Nancy.Lin ha scritto:
> Add mt8195 vdosys1 clock driver name and routing table to
> the driver data of mtk-mmsys.
> 
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v11 07/22] soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1

[AngeloGioacchino Del Regno]

Il 10/01/22 09:46, Nancy.Lin ha scritto:
> Add cmdq support for mtk-mmsys config API.
> The mmsys config register settings need to take effect with the other
> HW settings(like OVL_ADAPTOR...) at the same vblanking time.
> 
> If we use CPU to write the mmsys reg, we can't guarantee all the
> settings can be written in the same vblanking time.
> Cmdq is used for this purpose. We prepare all the related HW settings
> in one cmdq packet. The first command in the packet is "wait stream done",
> and then following with all the HW settings. After the cmdq packet is
> flush to GCE HW. The GCE waits for the "stream done event" to coming
> and then starts flushing all the HW settings. This can guarantee all
> the settings flush in the same vblanking.
> 
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Re: [PATCH v11 02/22] dt-bindings: mediatek: add vdosys1 MERGE property for mt8195

[Chun-Kuang Hu]

Hi, Nancy:

Nancy.Lin <nancy.lin@mediatek.com> 於 2022年1月10日 週一 下午4:46寫道：
>
> MT8195 vdosys1 merge1 to merge4 have HW mute function.
> Add MERGE additional mute property description.

Applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang

>
> Signed-off-by: Nancy.Lin <nancy.lin@mediatek.com>
> Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Acked-By: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  .../devicetree/bindings/display/mediatek/mediatek,merge.yaml  | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
> index 28be8ffeb429..f5b1e632bcd5 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml
> @@ -61,6 +61,10 @@ properties:
>        command to SMI to speed up the data rate.
>      type: boolean
>
> +  mediatek,merge-mute:
> +    description: Support mute function. Mute the content of merge output.
> +    type: boolean
> +
>    mediatek,gce-client-reg:
>      description:
>        The register of client driver can be configured by gce with 4 arguments
> --
> 2.18.0
>