Re: [PATCH v3 3/4] arm64: dts: qcom: sc8280xp: camss: Add CCI definitions

[Bryan O'Donoghue <bryan.odonoghue@linaro.org>]

On 10/01/2024 11:03, Konrad Dybcio wrote:
> 
> 
> On 1/9/24 17:06, Bryan O'Donoghue wrote:
>> sc8280xp has four Camera Control Interface (CCI) blocks which pinout to
>> two I2C master controllers for each CCI.
>>
>> The CCI I2C pins are not muxed so we define them in the dtsi.
>>
>> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
>> ---
>>   arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 307 
>> +++++++++++++++++++++++++++++++++
>>   1 file changed, 307 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi 
>> b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> index febf28356ff8..f48dfa5e5f36 100644
>> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
>> @@ -3451,6 +3451,169 @@ usb_1_role_switch: endpoint {
>>               };
>>           };
>> +        cci0: cci@ac4a000 {
>> +            compatible = "qcom,sc8280xp-cci", "qcom,msm8996-cci";
>> +            reg = <0 0x0ac4a000 0 0x1000>;
>> +
>> +            interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
>> +
>> +            clocks = <&camcc CAMCC_CAMNOC_AXI_CLK>,
>> +                 <&camcc CAMCC_SLOW_AHB_CLK_SRC>,
>> +                 <&camcc CAMCC_CPAS_AHB_CLK>,
>> +                 <&camcc CAMCC_CCI_0_CLK>;
>> +            clock-names = "camnoc_axi",
>> +                      "slow_ahb_src",
>> +                      "cpas_ahb",
>> +                      "cci";
>> +
>> +            power-domains = <&camcc TITAN_TOP_GDSC>;
>> +
>> +            pinctrl-names = "default", "sleep";
>> +            pinctrl-0 = <&cci0_default>;
>> +            pinctrl-1 = <&cci0_sleep>;
>> +
> property-names goes below property-n, just like with clocks 10 lines
> above :/

Didn't you ask for this to be re-ordered ?

https://lore.kernel.org/linux-arm-msm/d8b2867f-7fc6-4147-ae48-11bbf580b5bf@linaro.org/

quote

"
 > +
 > +			pinctrl-0 = <&cci0_default>;
 > +			pinctrl-1 = <&cci0_sleep>;
 > +			pinctrl-names = "default", "sleep";

please refer to Documentation/devicetree/bindings/dts-coding-style.rst
"

Never mind I suppose.

---
bod