Re: [PATCH] Documentation: devicetree: Add PHY no lane swap binding

[Florian Fainelli <f.fainelli-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

On 02/06/2017 06:15 AM, Lukasz Majewski wrote:
> Hi Florian, Andrew,
> 
>> Le 02/04/17 à 09:23, Andrew Lunn a écrit :
>>> On Sat, Feb 04, 2017 at 04:47:47PM +0100, Lukasz Majewski wrote:
>>>> Add the documentation to avoid PHY lane swapping. This is a boolean
>>>> entry to notify the phy device drivers that the TX/RX lanes NO need
>>>
>>> that the TX/RX lanes should not be swapped.
>>>
>>>> to be swapped.
>>>> The use case for this binding mostly happens after wrong HW
>>>> configuration of PHY IC during bootstrap.
>>>>
>>>> Signed-off-by: Lukasz Majewski <lukma-ynQEQJNshbs@public.gmane.org>
>>>> ---
>>>>  Documentation/devicetree/bindings/net/phy.txt | 4 ++++
>>>>  1 file changed, 4 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/net/phy.txt
>>>> b/Documentation/devicetree/bindings/net/phy.txt index
>>>> fb5056b..5e25bc9 100644 ---
>>>> a/Documentation/devicetree/bindings/net/phy.txt +++
>>>> b/Documentation/devicetree/bindings/net/phy.txt @@ -39,6 +39,10 @@
>>>> Optional Properties:
>>>>  - enet-phy-lane-swap: If set, indicates the PHY will swap the
>>>> TX/RX lanes to compensate for the board being designed with the
>>>> lanes swapped. 
>>>> +- enet-phy-lane-no-swap: If set, indicates that PHY will disable
>>>> swap of the
>>>> +  TX/RX lanes. This binding allows the PHY to work correcly after
>>>> e.g. wrong
>>>> +  bootstrap configuration caused by issues in PCB layout design.
>>
>> s/binding/property/
>>
>>>> +
>>>
>>> We are leaving it undefined what it means if neither
>>> enet-phy-lane-no-swap nor enet-phy-lane-swap properties are present.
>>> Do we want to define this? That the swap should be left untouched by
>>> the driver?
>>
>> Since this is a description of the hardware, absence of a properties
>> should mean that the driver is at freedom to either keep the hardware
>> defaults, or come up with its own settings that are sensible for that
>> particular PHY device.
>>
>> What would you see clarified here?
> 
> Any more comments to this patch?
> 
> Is the explanation informative enough?

Please resubmit as part of your PHY driver changes, and change binding
in the description above for property.
-- 
Florian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html