Re: [PATCH v4 05/11] i2c: riic: Add suspend/resume support

[claudiu beznea <claudiu.beznea@tuxon.dev>]

Hi, Andi,

On 19.08.2024 22:37, Andi Shyti wrote:
> Hi Claudiu,
> 
> On Mon, Aug 19, 2024 at 01:23:42PM GMT, Claudiu wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
>>
>> Add suspend/resume support for the RIIC driver. This is necessary for the
>> Renesas RZ/G3S SoC which support suspend to deep sleep state where power
>> to most of the SoC components is turned off. As a result the I2C controller
>> needs to be reconfigured after suspend/resume. For this, the reset line
>> was stored in the driver private data structure as well as i2c timings.
>> The reset line and I2C timings are necessary to re-initialize the
>> controller after resume.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
> 
> This patch doesn't have tags, so I'll add mine :-)
> 
> Reviewed-by: Andi Shyti <andi.shyti@kernel.org> 
> 
> Just one thing, though...
> 
> ...
> 
>> +static int riic_i2c_resume(struct device *dev)
>> +{
>> +	struct riic_dev *riic = dev_get_drvdata(dev);
>> +	int ret;
>> +
>> +	ret = reset_control_deassert(riic->rstc);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = riic_init_hw(riic);
>> +	if (ret) {
>> +		reset_control_assert(riic->rstc);
>> +		return ret;
> 
> Can I add a comment here saying:
> 
> 	/*
> 	 * Since the driver remains loaded after resume,
> 	 * we want the reset line to be asserted.
> 	 */

Sure, thank you!

> 	reset_control_assert(riic->rstc);
> 
> Unless I missed the point :-)
> 
> Thanks,
> Andi