* [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board
2024-02-02 13:36 [PATCH 0/3] arm64: qcom: add support for QCS8550 RB5gen2 HDK board Wasim Nazir
@ 2024-02-02 13:36 ` Wasim Nazir
2024-02-02 14:34 ` Krzysztof Kozlowski
2024-02-02 14:51 ` Dmitry Baryshkov
2024-02-02 13:36 ` [PATCH 2/3] arm64: dts: qcom: Add initial support for rb5gen2 SOM Wasim Nazir
2024-02-02 13:36 ` [PATCH 3/3] arm64: dts: qcom: Add initial support for rb5gen2 HDK board Wasim Nazir
2 siblings, 2 replies; 10+ messages in thread
From: Wasim Nazir @ 2024-02-02 13:36 UTC (permalink / raw)
To: andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt
Cc: linux-arm-msm, devicetree, linux-kernel, kernel, Wasim Nazir
Document board bindings for Rb5 gen2 hardware development kit.
Rb5gen2-HDK is using Rb5 gen2 SOM which is based on QCS8550 SoC.
RB5gen2-HDK is development kit used for IOT solutions.
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 9cee874a8eae..ce5b5dfe0e46 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -104,6 +104,7 @@ description: |
qcp
qrd
rb2
+ rb5gen2-hdk
ride
sbc
x100
@@ -915,6 +916,14 @@ properties:
- const: qcom,qcm8550
- const: qcom,sm8550
+ - items:
+ - enum:
+ - qcom,qcs8550-rb5gen2-hdk
+ - const: qcom,qcs8550-rb5gen2
+ - const: qcom,qcs8550
+ - const: qcom,qcm8550
+ - const: qcom,sm8550
+
- items:
- enum:
- qcom,sa8155p-adp
--
2.43.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board
2024-02-02 13:36 ` [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board Wasim Nazir
@ 2024-02-02 14:34 ` Krzysztof Kozlowski
2024-02-27 6:46 ` Wasim Nazir
2024-02-02 14:51 ` Dmitry Baryshkov
1 sibling, 1 reply; 10+ messages in thread
From: Krzysztof Kozlowski @ 2024-02-02 14:34 UTC (permalink / raw)
To: Wasim Nazir, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, conor+dt
Cc: linux-arm-msm, devicetree, linux-kernel, kernel
On 02/02/2024 14:36, Wasim Nazir wrote:
> Document board bindings for Rb5 gen2 hardware development kit.
> Rb5gen2-HDK is using Rb5 gen2 SOM which is based on QCS8550 SoC.
> RB5gen2-HDK is development kit used for IOT solutions.
>
> Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
>
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index 9cee874a8eae..ce5b5dfe0e46 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -104,6 +104,7 @@ description: |
> qcp
> qrd
> rb2
> + rb5gen2-hdk
I think we decided to stop growing this, especially that "rb5gen2-hdk"
does not look generic type of a board.
> --
> 2.43.0
>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board
2024-02-02 14:34 ` Krzysztof Kozlowski
@ 2024-02-27 6:46 ` Wasim Nazir
0 siblings, 0 replies; 10+ messages in thread
From: Wasim Nazir @ 2024-02-27 6:46 UTC (permalink / raw)
To: Krzysztof Kozlowski, andersson, konrad.dybcio, robh+dt,
krzysztof.kozlowski+dt, conor+dt
Cc: linux-arm-msm, devicetree, linux-kernel, kernel
On 2/2/2024 8:04 PM, Krzysztof Kozlowski wrote:
> On 02/02/2024 14:36, Wasim Nazir wrote:
>> Document board bindings for Rb5 gen2 hardware development kit.
>> Rb5gen2-HDK is using Rb5 gen2 SOM which is based on QCS8550 SoC.
>> RB5gen2-HDK is development kit used for IOT solutions.
>>
>> Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
>>
>> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
>> index 9cee874a8eae..ce5b5dfe0e46 100644
>> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
>> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
>> @@ -104,6 +104,7 @@ description: |
>> qcp
>> qrd
>> rb2
>> + rb5gen2-hdk
>
> I think we decided to stop growing this, especially that "rb5gen2-hdk"
> does not look generic type of a board.
>
Will remove this in next patch version.
>> --
>> 2.43.0
>>
>
> Best regards,
> Krzysztof
>
Thanks & regards,
Wasim
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board
2024-02-02 13:36 ` [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board Wasim Nazir
2024-02-02 14:34 ` Krzysztof Kozlowski
@ 2024-02-02 14:51 ` Dmitry Baryshkov
2024-02-27 6:52 ` Wasim Nazir
1 sibling, 1 reply; 10+ messages in thread
From: Dmitry Baryshkov @ 2024-02-02 14:51 UTC (permalink / raw)
To: Wasim Nazir
Cc: andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, linux-arm-msm, devicetree, linux-kernel, kernel
On Fri, 2 Feb 2024 at 15:37, Wasim Nazir <quic_wasimn@quicinc.com> wrote:
>
> Document board bindings for Rb5 gen2 hardware development kit.
> Rb5gen2-HDK is using Rb5 gen2 SOM which is based on QCS8550 SoC.
> RB5gen2-HDK is development kit used for IOT solutions.
What is the actual marketing name for the SoM and the carrier board?
The RB5gen2-HDK doesn't follow the previous example of the RB* boards
and doesn't sound in tune with the RB3gen2 submission.
Could you please sync up internally and come up with two similar names
for the platforms with similar purpose?
>
> Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
>
> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
> index 9cee874a8eae..ce5b5dfe0e46 100644
> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
> @@ -104,6 +104,7 @@ description: |
> qcp
> qrd
> rb2
> + rb5gen2-hdk
> ride
> sbc
> x100
> @@ -915,6 +916,14 @@ properties:
> - const: qcom,qcm8550
> - const: qcom,sm8550
>
> + - items:
> + - enum:
> + - qcom,qcs8550-rb5gen2-hdk
> + - const: qcom,qcs8550-rb5gen2
> + - const: qcom,qcs8550
> + - const: qcom,qcm8550
> + - const: qcom,sm8550
> +
> - items:
> - enum:
> - qcom,sa8155p-adp
> --
> 2.43.0
>
>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board
2024-02-02 14:51 ` Dmitry Baryshkov
@ 2024-02-27 6:52 ` Wasim Nazir
0 siblings, 0 replies; 10+ messages in thread
From: Wasim Nazir @ 2024-02-27 6:52 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, linux-arm-msm, devicetree, linux-kernel, kernel
On 2/2/2024 8:21 PM, Dmitry Baryshkov wrote:
> On Fri, 2 Feb 2024 at 15:37, Wasim Nazir <quic_wasimn@quicinc.com> wrote:
>>
>> Document board bindings for Rb5 gen2 hardware development kit.
>> Rb5gen2-HDK is using Rb5 gen2 SOM which is based on QCS8550 SoC.
>> RB5gen2-HDK is development kit used for IOT solutions.
>
> What is the actual marketing name for the SoM and the carrier board?
> The RB5gen2-HDK doesn't follow the previous example of the RB* boards
> and doesn't sound in tune with the RB3gen2 submission.
> Could you please sync up internally and come up with two similar names
> for the platforms with similar purpose?
>
Discussed internally and we concluded on these official names, will
update accordingly in next patch.
SOM: qcs8550-rb5gen2-som.dtsi
Board: qcs8550-rb5gen2.dts
>>
>> Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
>>
>> diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
>> index 9cee874a8eae..ce5b5dfe0e46 100644
>> --- a/Documentation/devicetree/bindings/arm/qcom.yaml
>> +++ b/Documentation/devicetree/bindings/arm/qcom.yaml
>> @@ -104,6 +104,7 @@ description: |
>> qcp
>> qrd
>> rb2
>> + rb5gen2-hdk
>> ride
>> sbc
>> x100
>> @@ -915,6 +916,14 @@ properties:
>> - const: qcom,qcm8550
>> - const: qcom,sm8550
>>
>> + - items:
>> + - enum:
>> + - qcom,qcs8550-rb5gen2-hdk
>> + - const: qcom,qcs8550-rb5gen2
>> + - const: qcom,qcs8550
>> + - const: qcom,qcm8550
>> + - const: qcom,sm8550
>> +
>> - items:
>> - enum:
>> - qcom,sa8155p-adp
>> --
>> 2.43.0
>>
>>
>
>
Thanks & Regards,
Wasim
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/3] arm64: dts: qcom: Add initial support for rb5gen2 SOM
2024-02-02 13:36 [PATCH 0/3] arm64: qcom: add support for QCS8550 RB5gen2 HDK board Wasim Nazir
2024-02-02 13:36 ` [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board Wasim Nazir
@ 2024-02-02 13:36 ` Wasim Nazir
2024-02-02 13:36 ` [PATCH 3/3] arm64: dts: qcom: Add initial support for rb5gen2 HDK board Wasim Nazir
2 siblings, 0 replies; 10+ messages in thread
From: Wasim Nazir @ 2024-02-02 13:36 UTC (permalink / raw)
To: andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt
Cc: linux-arm-msm, devicetree, linux-kernel, kernel, Wasim Nazir
Rb5gen2 SOM is based on QCS8550 SoC, used for Rb5gen2 HDK.
This initial version describes regulators & ufs storage.
On-board components:
- Qualcomm QCS8550 SoC
- LPDDR5, 12 GiB
- UFS3.1, 128 GiB
On-board PMICs:
- PM8550VS
- PM8550VE
- PM8550
- PM8550BH
- PMK8550
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dtsi b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dtsi
new file mode 100644
index 000000000000..6e2a644f3f7c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2.dtsi
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "qcm8550.dtsi"
+#include "pm8550.dtsi"
+#include "pm8550b.dtsi"
+#define PMK8550VE_SID 5
+#include "pm8550ve.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmk8550.dtsi"
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8550-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-l1-l4-l10-supply = <&vreg_s6g_1p86>;
+ vdd-l2-l13-l14-supply = <&vreg_bob1>;
+ vdd-l5-l16-supply = <&vreg_bob1>;
+ vdd-l6-l7-supply = <&vreg_bob1>;
+ vdd-l8-l9-supply = <&vreg_bob1>;
+ vdd-l11-supply = <&vreg_s4g_1p25>;
+ vdd-l12-supply = <&vreg_s6g_1p86>;
+ vdd-l15-supply = <&vreg_s6g_1p86>;
+ vdd-l17-supply = <&vreg_bob2>;
+
+ vreg_bob1: bob1 {
+ regulator-name = "vreg_bob1";
+ regulator-min-microvolt = <3296000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob2: bob2 {
+ regulator-name = "vreg_bob2";
+ regulator-min-microvolt = <2720000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1b_1p8: ldo1 {
+ regulator-name = "vreg_l1b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b_3p0: ldo2 {
+ regulator-name = "vreg_l2b_3p0";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b_3p1: ldo5 {
+ regulator-name = "vreg_l5b_3p1";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6b_1p8: ldo6 {
+ regulator-name = "vreg_l6b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b_1p8: ldo7 {
+ regulator-name = "vreg_l7b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b_1p8: ldo8 {
+ regulator-name = "vreg_l8b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b_2p9: ldo9 {
+ regulator-name = "vreg_l9b_2p9";
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b_1p8: ldo10 {
+ regulator-name = "vreg_l10b_1p8";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <1980000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b_1p2: ldo11 {
+ regulator-name = "vreg_l11b_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b_1p8: ldo12 {
+ regulator-name = "vreg_l12b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b_3p0: ldo13 {
+ regulator-name = "vreg_l13b_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b_3p2: ldo14 {
+ regulator-name = "vreg_l14b_3p2";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b_1p8: ldo15 {
+ regulator-name = "vreg_l15b_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b_2p8: ldo16 {
+ regulator-name = "vreg_l16b_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b_2p5: ldo17 {
+ regulator-name = "vreg_l17b_2p5";
+ regulator-min-microvolt = <2504000>;
+ regulator-max-microvolt = <2504000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-l1-supply = <&vreg_s4g_1p25>;
+ vdd-l3-supply = <&vreg_s4e_0p95>;
+
+ vreg_l1c_1p2: ldo1 {
+ regulator-name = "vreg_l1c_1p2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3c_0p9: ldo3 {
+ regulator-name = "vreg_l3c_0p9";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "d";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+
+ vreg_s4d_0p628: smps4 {
+ regulator-name = "vreg_s4d_0p628";
+ regulator-min-microvolt = <572000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5d_0p728: smps5 {
+ regulator-name = "vreg_s5d_0p728";
+ regulator-min-microvolt = <465000>;
+ regulator-max-microvolt = <815000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l1d_0p88: ldo1 {
+ regulator-name = "vreg_l1d_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <920000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2d_0p752: ldo2 {
+ regulator-name = "vreg_l2d_0p752";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-3 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "e";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4g_1p25>;
+
+ vreg_l1e_0p88: ldo1 {
+ regulator-name = "vreg_l1e_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2e_0p9: ldo2 {
+ regulator-name = "vreg_l2e_0p9";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3e_1p2: ldo3 {
+ regulator-name = "vreg_l3e_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s1e_0p728: smps1 {
+ regulator-name = "vreg_s1e_0p728";
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <832000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3e_0p752: smps3 {
+ regulator-name = "vreg_s3e_0p752";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <795000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4e_0p95: smps4 {
+ regulator-name = "vreg_s4e_0p95";
+ regulator-min-microvolt = <904000>;
+ regulator-max-microvolt = <984000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5e_1p08: smps5 {
+ regulator-name = "vreg_s5e_1p08";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1120000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6e_0p728: smps6 {
+ regulator-name = "vreg_s6e_0p728";
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-4 {
+ compatible = "qcom,pm8550ve-rpmh-regulators";
+ qcom,pmic-id = "f";
+
+ vdd-l1-supply = <&vreg_s4e_0p95>;
+ vdd-l2-supply = <&vreg_s4e_0p95>;
+ vdd-l3-supply = <&vreg_s4e_0p95>;
+
+ vreg_l1f_0p9: ldo1 {
+ regulator-name = "vreg_l1f_0p9";
+ regulator-min-microvolt = <912000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f_0p88: ldo2 {
+ regulator-name = "vreg_l2f_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f_0p88: ldo3 {
+ regulator-name = "vreg_l3f_0p88";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s1f_0p728: smps1 {
+ regulator-name = "vreg_s1f_0p728";
+ regulator-min-microvolt = <584000>;
+ regulator-max-microvolt = <856000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3f_0p825: smps3 {
+ regulator-name = "vreg_s3f_0p825";
+ regulator-min-microvolt = <640000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4f_0p5: smps4 {
+ regulator-name = "vreg_s4f_0p5";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <700000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5f_0p752: smps5 {
+ regulator-name = "vreg_s5f_0p752";
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s7f_0p628: smps7 {
+ regulator-name = "vreg_s7f_0p628";
+ regulator-min-microvolt = <465000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-5 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+ qcom,pmic-id = "g";
+
+ vdd-l1-supply = <&vreg_s4g_1p25>;
+ vdd-l2-supply = <&vreg_s4g_1p25>;
+ vdd-l3-supply = <&vreg_s4g_1p25>;
+
+ vreg_l1g_1p2: ldo1 {
+ regulator-name = "vreg_l1g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2g_1p2: ldo2 {
+ regulator-name = "vreg_l2g_1p2";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3g_1p2: ldo3 {
+ regulator-name = "vreg_l3g_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s1g_1p25: smps1 {
+ regulator-name = "vreg_s1g_1p25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2g_0p85: smps2 {
+ regulator-name = "vreg_s2g_0p85";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3g_0p8: smps3 {
+ regulator-name = "vreg_s3g_0p8";
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s4g_1p25: smps4 {
+ regulator-name = "vreg_s4g_1p25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1352000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s5g_0p85: smps5 {
+ regulator-name = "vreg_s5g_0p85";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1004000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s6g_1p86: smps6 {
+ regulator-name = "vreg_s6g_1p86";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&sleep_clk {
+ clock-frequency = <32000>;
+};
+
+&ufs_mem_hc {
+ reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&vreg_l17b_2p5>;
+ vcc-max-microamp = <1300000>;
+ vccq-supply = <&vreg_l1g_1p2>;
+ vccq-max-microamp = <1200000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l1d_0p88>;
+ vdda-pll-supply = <&vreg_l3e_1p2>;
+
+ status = "okay";
+};
+
+&xo_board {
+ clock-frequency = <76800000>;
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* [PATCH 3/3] arm64: dts: qcom: Add initial support for rb5gen2 HDK board
2024-02-02 13:36 [PATCH 0/3] arm64: qcom: add support for QCS8550 RB5gen2 HDK board Wasim Nazir
2024-02-02 13:36 ` [PATCH 1/3] dt-bindings: arm: qcom: Document rb5gen2-hdk board Wasim Nazir
2024-02-02 13:36 ` [PATCH 2/3] arm64: dts: qcom: Add initial support for rb5gen2 SOM Wasim Nazir
@ 2024-02-02 13:36 ` Wasim Nazir
2024-02-02 14:53 ` Dmitry Baryshkov
2 siblings, 1 reply; 10+ messages in thread
From: Wasim Nazir @ 2024-02-02 13:36 UTC (permalink / raw)
To: andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt
Cc: linux-arm-msm, devicetree, linux-kernel, kernel, Wasim Nazir
RB5gen2 hardware development kit is based on QCS8550-Rb5gen2 SOM
for IOT solutions.
This initial version describes VPH_PWR, UART & USB3.1.
On-board PMICs:
- PMR735D
- PM8010
Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6fdde64d7540..8840b219d6d5 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -93,6 +93,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs8550-rb5gen2-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb
dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts
new file mode 100644
index 000000000000..6f4c68402823
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "qcs8550-rb5gen2.dtsi"
+#include "pm8010.dtsi"
+#include "pmr735d_a.dtsi"
+#include "pmr735d_b.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. QCS8550 RB5Gen2 HDK";
+ compatible = "qcom,qcs8550-rb5gen2-hdk", "qcom,qcs8550-rb5gen2",
+ "qcom,qcs8550", "qcom,qcm8550", "qcom,sm8550";
+
+ aliases {
+ serial0 = &uart7;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+ };
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ vdd-bob1-supply = <&vph_pwr>;
+ vdd-bob2-supply = <&vph_pwr>;
+ };
+
+ regulators-2 {
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ };
+
+ regulators-3 {
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ };
+
+ regulators-4 {
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ };
+
+ regulators-5 {
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ };
+};
+
+&pm8550b_eusb2_repeater {
+ vdd18-supply = <&vreg_l15b_1p8>;
+ vdd3-supply = <&vreg_l5b_3p1>;
+};
+
+&uart7 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ dr_mode = "otg";
+ usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l1e_0p88>;
+ vdda12-supply = <&vreg_l3e_1p2>;
+
+ phys = <&pm8550b_eusb2_repeater>;
+
+ status = "okay";
+};
+
+&usb_dp_qmpphy {
+ vdda-phy-supply = <&vreg_l3e_1p2>;
+ vdda-pll-supply = <&vreg_l3f_0p88>;
+
+ status = "okay";
+};
--
2.43.0
^ permalink raw reply related [flat|nested] 10+ messages in thread* Re: [PATCH 3/3] arm64: dts: qcom: Add initial support for rb5gen2 HDK board
2024-02-02 13:36 ` [PATCH 3/3] arm64: dts: qcom: Add initial support for rb5gen2 HDK board Wasim Nazir
@ 2024-02-02 14:53 ` Dmitry Baryshkov
2024-02-27 9:37 ` Wasim Nazir
0 siblings, 1 reply; 10+ messages in thread
From: Dmitry Baryshkov @ 2024-02-02 14:53 UTC (permalink / raw)
To: Wasim Nazir
Cc: andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, linux-arm-msm, devicetree, linux-kernel, kernel
On Fri, 2 Feb 2024 at 15:37, Wasim Nazir <quic_wasimn@quicinc.com> wrote:
>
> RB5gen2 hardware development kit is based on QCS8550-Rb5gen2 SOM
> for IOT solutions.
> This initial version describes VPH_PWR, UART & USB3.1.
>
> On-board PMICs:
> - PMR735D
> - PM8010
>
> Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 6fdde64d7540..8840b219d6d5 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -93,6 +93,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += qcs8550-rb5gen2-hdk.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts
> new file mode 100644
> index 000000000000..6f4c68402823
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts
> @@ -0,0 +1,136 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "qcs8550-rb5gen2.dtsi"
> +#include "pm8010.dtsi"
> +#include "pmr735d_a.dtsi"
> +#include "pmr735d_b.dtsi"
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. QCS8550 RB5Gen2 HDK";
> + compatible = "qcom,qcs8550-rb5gen2-hdk", "qcom,qcs8550-rb5gen2",
> + "qcom,qcs8550", "qcom,qcm8550", "qcom,sm8550";
> +
> + aliases {
> + serial0 = &uart7;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + pmic-glink {
> + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + connector@0 {
> + compatible = "usb-c-connector";
> + reg = <0>;
> + power-role = "dual";
> + data-role = "dual";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> +
> + pmic_glink_hs_in: endpoint {
> + remote-endpoint = <&usb_1_dwc3_hs>;
> + };
SS lines unconnected?
SBU is unconnected?
> + };
> + };
> + };
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> +
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&apps_rsc {
> + regulators-0 {
> + vdd-bob1-supply = <&vph_pwr>;
> + vdd-bob2-supply = <&vph_pwr>;
> + };
> +
> + regulators-2 {
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + };
> +
> + regulators-3 {
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + };
> +
> + regulators-4 {
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s7-supply = <&vph_pwr>;
> + };
> +
> + regulators-5 {
> + vdd-s1-supply = <&vph_pwr>;
> + vdd-s2-supply = <&vph_pwr>;
> + vdd-s3-supply = <&vph_pwr>;
> + vdd-s4-supply = <&vph_pwr>;
> + vdd-s5-supply = <&vph_pwr>;
> + vdd-s6-supply = <&vph_pwr>;
> + };
> +};
> +
> +&pm8550b_eusb2_repeater {
> + vdd18-supply = <&vreg_l15b_1p8>;
> + vdd3-supply = <&vreg_l5b_3p1>;
> +};
> +
> +&uart7 {
> + status = "okay";
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + dr_mode = "otg";
> + usb-role-switch;
> +};
> +
> +&usb_1_dwc3_hs {
> + remote-endpoint = <&pmic_glink_hs_in>;
> +};
> +
> +&usb_1_hsphy {
> + vdd-supply = <&vreg_l1e_0p88>;
> + vdda12-supply = <&vreg_l3e_1p2>;
> +
> + phys = <&pm8550b_eusb2_repeater>;
> +
> + status = "okay";
> +};
> +
> +&usb_dp_qmpphy {
> + vdda-phy-supply = <&vreg_l3e_1p2>;
> + vdda-pll-supply = <&vreg_l3f_0p88>;
> +
> + status = "okay";
> +};
> --
> 2.43.0
>
>
--
With best wishes
Dmitry
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: [PATCH 3/3] arm64: dts: qcom: Add initial support for rb5gen2 HDK board
2024-02-02 14:53 ` Dmitry Baryshkov
@ 2024-02-27 9:37 ` Wasim Nazir
0 siblings, 0 replies; 10+ messages in thread
From: Wasim Nazir @ 2024-02-27 9:37 UTC (permalink / raw)
To: Dmitry Baryshkov
Cc: andersson, konrad.dybcio, robh+dt, krzysztof.kozlowski+dt,
conor+dt, linux-arm-msm, devicetree, linux-kernel, kernel
On 2/2/2024 8:23 PM, Dmitry Baryshkov wrote:
> On Fri, 2 Feb 2024 at 15:37, Wasim Nazir <quic_wasimn@quicinc.com> wrote:
>>
>> RB5gen2 hardware development kit is based on QCS8550-Rb5gen2 SOM
>> for IOT solutions.
>> This initial version describes VPH_PWR, UART & USB3.1.
>>
>> On-board PMICs:
>> - PMR735D
>> - PM8010
>>
>> Signed-off-by: Wasim Nazir <quic_wasimn@quicinc.com>
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index 6fdde64d7540..8840b219d6d5 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -93,6 +93,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += qcs8550-rb5gen2-hdk.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += qrb4210-rb2.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts
>> new file mode 100644
>> index 000000000000..6f4c68402823
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qcs8550-rb5gen2-hdk.dts
>> @@ -0,0 +1,136 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "qcs8550-rb5gen2.dtsi"
>> +#include "pm8010.dtsi"
>> +#include "pmr735d_a.dtsi"
>> +#include "pmr735d_b.dtsi"
>> +
>> +/ {
>> + model = "Qualcomm Technologies, Inc. QCS8550 RB5Gen2 HDK";
>> + compatible = "qcom,qcs8550-rb5gen2-hdk", "qcom,qcs8550-rb5gen2",
>> + "qcom,qcs8550", "qcom,qcm8550", "qcom,sm8550";
>> +
>> + aliases {
>> + serial0 = &uart7;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + pmic-glink {
>> + compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + connector@0 {
>> + compatible = "usb-c-connector";
>> + reg = <0>;
>> + power-role = "dual";
>> + data-role = "dual";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + port@0 {
>> + reg = <0>;
>> +
>> + pmic_glink_hs_in: endpoint {
>> + remote-endpoint = <&usb_1_dwc3_hs>;
>> + };
>
> SS lines unconnected?
> SBU is unconnected?
>
This is the initial patch with basic support and that's why only HS is
added. Other features are planned in incremental patch by respective
team. I will update the commit message in next patch version.
>> + };
>> + };
>> + };
>> + };
>> +
>> + vph_pwr: vph-pwr-regulator {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vph_pwr";
>> + regulator-min-microvolt = <3700000>;
>> + regulator-max-microvolt = <3700000>;
>> +
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +};
>> +
>> +&apps_rsc {
>> + regulators-0 {
>> + vdd-bob1-supply = <&vph_pwr>;
>> + vdd-bob2-supply = <&vph_pwr>;
>> + };
>> +
>> + regulators-2 {
>> + vdd-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> + };
>> +
>> + regulators-3 {
>> + vdd-s1-supply = <&vph_pwr>;
>> + vdd-s3-supply = <&vph_pwr>;
>> + vdd-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> + vdd-s6-supply = <&vph_pwr>;
>> + };
>> +
>> + regulators-4 {
>> + vdd-s1-supply = <&vph_pwr>;
>> + vdd-s3-supply = <&vph_pwr>;
>> + vdd-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> + vdd-s7-supply = <&vph_pwr>;
>> + };
>> +
>> + regulators-5 {
>> + vdd-s1-supply = <&vph_pwr>;
>> + vdd-s2-supply = <&vph_pwr>;
>> + vdd-s3-supply = <&vph_pwr>;
>> + vdd-s4-supply = <&vph_pwr>;
>> + vdd-s5-supply = <&vph_pwr>;
>> + vdd-s6-supply = <&vph_pwr>;
>> + };
>> +};
>> +
>> +&pm8550b_eusb2_repeater {
>> + vdd18-supply = <&vreg_l15b_1p8>;
>> + vdd3-supply = <&vreg_l5b_3p1>;
>> +};
>> +
>> +&uart7 {
>> + status = "okay";
>> +};
>> +
>> +&usb_1 {
>> + status = "okay";
>> +};
>> +
>> +&usb_1_dwc3 {
>> + dr_mode = "otg";
>> + usb-role-switch;
>> +};
>> +
>> +&usb_1_dwc3_hs {
>> + remote-endpoint = <&pmic_glink_hs_in>;
>> +};
>> +
>> +&usb_1_hsphy {
>> + vdd-supply = <&vreg_l1e_0p88>;
>> + vdda12-supply = <&vreg_l3e_1p2>;
>> +
>> + phys = <&pm8550b_eusb2_repeater>;
>> +
>> + status = "okay";
>> +};
>> +
>> +&usb_dp_qmpphy {
>> + vdda-phy-supply = <&vreg_l3e_1p2>;
>> + vdda-pll-supply = <&vreg_l3f_0p88>;
>> +
>> + status = "okay";
>> +};
>> --
>> 2.43.0
>>
>>
>
>
Thanks & Regards,
Wasim
^ permalink raw reply [flat|nested] 10+ messages in thread