* Re: [PATCH 2/3] dt-bindings: leds: Shiji Lighting APA102C LED driver [not found] ` <1582018657-5720-3-git-send-email-nbelin@baylibre.com> @ 2020-02-20 10:30 ` Geert Uytterhoeven 2020-02-20 19:41 ` Jacek Anaszewski 0 siblings, 1 reply; 2+ messages in thread From: Geert Uytterhoeven @ 2020-02-20 10:30 UTC (permalink / raw) To: Nicolas Belin Cc: Linux Kernel Mailing List, linux-leds, Jacek Anaszewski, Pavel Machek, Dan Murphy, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Lukas Wunner Hi Nicolas, CC devicetree, Lukas On Tue, Feb 18, 2020 at 10:39 AM Nicolas Belin <nbelin@baylibre.com> wrote: > Document Shiji Lighting APA102C LED driver device tree bindings. > > Signed-off-by: Nicolas Belin <nbelin@baylibre.com> > --- > .../devicetree/bindings/leds/leds-apa102c.yaml | 91 ++++++++++++++++++++++ > 1 file changed, 91 insertions(+) > create mode 100644 Documentation/devicetree/bindings/leds/leds-apa102c.yaml > > diff --git a/Documentation/devicetree/bindings/leds/leds-apa102c.yaml b/Documentation/devicetree/bindings/leds/leds-apa102c.yaml > new file mode 100644 > index 000000000000..24bc2fc19fcb > --- /dev/null > +++ b/Documentation/devicetree/bindings/leds/leds-apa102c.yaml > @@ -0,0 +1,91 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/leds/leds-apa102c.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: LED driver for Shiji Lighting - APA102C > + > +maintainers: > + - Nicolas Belin <nbelin@baylibre.com> > + > +description: > + Each LED is represented as a sub-node of the leds-apa102c device. Each LED > + is a three color RGB LED with 32 levels brightness adjustment that can be > + cascaded so that multiple LEDs can be set with a single command. > + > +properties: > + compatible: > + const: shiji,apa102c > + > + reg: > + maxItems: 1 > + > + spi-max-frequency: > + maximum: 1000000 > + > + "#address-cells": > + const: 1 > + > + "#size-cells": > + const: 0 > + > +required: > + - compatible > + - reg > + - spi-max-frequency > + - '#address-cells' > + - '#size-cells' > + > +patternProperties: > + "^led@[0-9]+$": > + type: object > + description: | > + Properties for an array of connected LEDs. > + > + properties: > + reg: > + description: | > + This property corresponds to the led index. It has to be between 0 > + and the number of managed leds minus 1 > + maxItems: 1 > + > + label: > + description: | > + This property corresponds to the name of the led. If not set, > + the led index will be used to create the led name instead > + maxItems: 1 > + > + linux,default-trigger: true > + > + required: > + - reg > + > +examples: > + - | > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + led-controller@0 { > + compatible = "shiji,apa102c"; > + reg = <0>; > + #address-cells = <1>; > + #size-cells = <0>; > + spi-max-frequency = <1000000>; > + led@0 { > + reg = <0>; > + label = "led1"; > + }; > + > + led@1 { > + reg = <1>; > + label = "led2"; > + }; > + > + led@2 { > + reg = <2>; > + label = "led3"; > + }; > + }; > + }; Perhaps this should use "#daisy-chained-devices" instead of listing all LEDs explicitly? Or would that cause problems w.r.t. LED labeling? Documentation/devicetree/bindings/common-properties.txt Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH 2/3] dt-bindings: leds: Shiji Lighting APA102C LED driver 2020-02-20 10:30 ` [PATCH 2/3] dt-bindings: leds: Shiji Lighting APA102C LED driver Geert Uytterhoeven @ 2020-02-20 19:41 ` Jacek Anaszewski 0 siblings, 0 replies; 2+ messages in thread From: Jacek Anaszewski @ 2020-02-20 19:41 UTC (permalink / raw) To: Geert Uytterhoeven, Nicolas Belin Cc: Linux Kernel Mailing List, linux-leds, Pavel Machek, Dan Murphy, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, Lukas Wunner Hi Geert, On 2/20/20 11:30 AM, Geert Uytterhoeven wrote: > Hi Nicolas, > > CC devicetree, Lukas > > On Tue, Feb 18, 2020 at 10:39 AM Nicolas Belin <nbelin@baylibre.com> wrote: >> Document Shiji Lighting APA102C LED driver device tree bindings. >> >> Signed-off-by: Nicolas Belin <nbelin@baylibre.com> >> --- >> .../devicetree/bindings/leds/leds-apa102c.yaml | 91 ++++++++++++++++++++++ >> 1 file changed, 91 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/leds/leds-apa102c.yaml >> >> diff --git a/Documentation/devicetree/bindings/leds/leds-apa102c.yaml b/Documentation/devicetree/bindings/leds/leds-apa102c.yaml >> new file mode 100644 >> index 000000000000..24bc2fc19fcb >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/leds/leds-apa102c.yaml >> @@ -0,0 +1,91 @@ >> +# SPDX-License-Identifier: GPL-2.0 >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/leds/leds-apa102c.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: LED driver for Shiji Lighting - APA102C >> + >> +maintainers: >> + - Nicolas Belin <nbelin@baylibre.com> >> + >> +description: >> + Each LED is represented as a sub-node of the leds-apa102c device. Each LED >> + is a three color RGB LED with 32 levels brightness adjustment that can be >> + cascaded so that multiple LEDs can be set with a single command. >> + >> +properties: >> + compatible: >> + const: shiji,apa102c >> + >> + reg: >> + maxItems: 1 >> + >> + spi-max-frequency: >> + maximum: 1000000 >> + >> + "#address-cells": >> + const: 1 >> + >> + "#size-cells": >> + const: 0 >> + >> +required: >> + - compatible >> + - reg >> + - spi-max-frequency >> + - '#address-cells' >> + - '#size-cells' >> + >> +patternProperties: >> + "^led@[0-9]+$": >> + type: object >> + description: | >> + Properties for an array of connected LEDs. >> + >> + properties: >> + reg: >> + description: | >> + This property corresponds to the led index. It has to be between 0 >> + and the number of managed leds minus 1 >> + maxItems: 1 >> + >> + label: >> + description: | >> + This property corresponds to the name of the led. If not set, >> + the led index will be used to create the led name instead >> + maxItems: 1 >> + >> + linux,default-trigger: true >> + >> + required: >> + - reg >> + >> +examples: >> + - | >> + spi { >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + led-controller@0 { >> + compatible = "shiji,apa102c"; >> + reg = <0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + spi-max-frequency = <1000000>; >> + led@0 { >> + reg = <0>; >> + label = "led1"; >> + }; >> + >> + led@1 { >> + reg = <1>; >> + label = "led2"; >> + }; >> + >> + led@2 { >> + reg = <2>; >> + label = "led3"; >> + }; >> + }; >> + }; > > Perhaps this should use "#daisy-chained-devices" instead of listing all LEDs > explicitly? > Or would that cause problems w.r.t. LED labeling? It would be against common LED bindings. Besides, this daisy-chain-devices property is not well documented. I.e. I don't see how it facilitates conveying information on output ID (here reg is used for that), and as you already mentioned - LED labeling. Generally speaking, I don't think it is applicable to the LED subsystem. > Documentation/devicetree/bindings/common-properties.txt > > Gr{oetje,eeting}s, > > Geert > -- Best regards, Jacek Anaszewski ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-02-20 19:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1582018657-5720-1-git-send-email-nbelin@baylibre.com>
[not found] ` <1582018657-5720-3-git-send-email-nbelin@baylibre.com>
2020-02-20 10:30 ` [PATCH 2/3] dt-bindings: leds: Shiji Lighting APA102C LED driver Geert Uytterhoeven
2020-02-20 19:41 ` Jacek Anaszewski
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).