Re: [PATCH v1 5/5] ASoC: tegra30: i2s: Add reset control

[Dmitry Osipenko <digetx@gmail.com>]

02.03.2021 14:21, Dmitry Osipenko пишет:
> The I2S reset may be asserted at a boot time. Tegra30 I2S driver doesn't
> manage the reset control and currently it happens to work because reset
> is implicitly deasserted by the Tegra AHUB driver, but the reset of I2C
> controller should be synchronous and I2S clock is disabled when AHUB is
> reset. Add reset control to the Tegra30 I2S driver.
> 
> Note that I2S reset was always specified in Tegra30+ device-trees, hence
> DTB ABI changes aren't required. Also note that AHUB touches I2S resets,
> hence AHUB resets are now requested in a released state, allowing both
> drivers to control the I2S resets together.
> 
> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> ---
>  sound/soc/tegra/tegra30_ahub.c | 14 ++++++++++---
>  sound/soc/tegra/tegra30_i2s.c  | 36 +++++++++++++++++++++++++++++++++-
>  sound/soc/tegra/tegra30_i2s.h  |  1 +
>  3 files changed, 47 insertions(+), 4 deletions(-)

...
> @@ -579,7 +587,7 @@ static int tegra30_ahub_probe(struct platform_device *pdev)
>  	if (ret)
>  		return ret;
>  
> -	ahub->reset = devm_reset_control_array_get_exclusive(&pdev->dev);
> +	ahub->reset = devm_reset_control_array_get_exclusive_released(&pdev->dev);

Thinking a bit more about this, it looks like we actually want something
like:

	devm_reset_control_array_get_exclusive_released_named()

that will request resets by given names and in a given order, similarly
to devm_clk_bulk_get(). This will be very handy for both Tegra audio and
GPU drivers. I'll prepare a v2 if there are no objections.