From: Alexandre TORGUE <alexandre.torgue@foss.st.com>
To: Jisheng Zhang <jszhang@kernel.org>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Giuseppe Cavallaro <peppe.cavallaro@st.com>,
Jose Abreu <joabreu@synopsys.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-stm32@st-md-mailman.stormreply.com>,
<linux-arm-kernel@lists.infradead.org>
Subject: Re: [PATCH net-next v3 05/10] net: stmmac: reflect multi irqs for tx/rx channels and mac and safety
Date: Thu, 10 Aug 2023 16:50:18 +0200 [thread overview]
Message-ID: <cc4ae254-659d-54d6-5007-155390d006d8@foss.st.com> (raw)
In-Reply-To: <20230809165007.1439-6-jszhang@kernel.org>
On 8/9/23 18:50, Jisheng Zhang wrote:
> The IP supports per channel interrupt, when intel adds the per channel
> interrupt support, the per channel irq is from MSI vector, but this
> feature can also be supported on non-MSI platforms. Do some necessary
> renaming to reflects this fact.
>
> Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
> ---
> .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 4 +-
> .../net/ethernet/stmicro/stmmac/dwmac4_dma.c | 2 +-
> .../net/ethernet/stmicro/stmmac/stmmac_main.c | 48 +++++++++----------
> include/linux/stmmac.h | 4 +-
> 4 files changed, 29 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> index 0ffae785d8bd..99a072907008 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> @@ -953,7 +953,7 @@ static int stmmac_config_single_msi(struct pci_dev *pdev,
>
> res->irq = pci_irq_vector(pdev, 0);
> res->wol_irq = res->irq;
> - plat->flags &= ~STMMAC_FLAG_MULTI_MSI_EN;
> + plat->flags &= ~STMMAC_FLAG_PERCH_IRQ_EN;
> dev_info(&pdev->dev, "%s: Single IRQ enablement successful\n",
> __func__);
>
> @@ -1005,7 +1005,7 @@ static int stmmac_config_multi_msi(struct pci_dev *pdev,
> if (plat->msi_sfty_ue_vec < STMMAC_MSI_VEC_MAX)
> res->sfty_ue_irq = pci_irq_vector(pdev, plat->msi_sfty_ue_vec);
>
> - plat->flags |= STMMAC_FLAG_MULTI_MSI_EN;
> + plat->flags |= STMMAC_FLAG_PERCH_IRQ_EN;
> dev_info(&pdev->dev, "%s: multi MSI enablement successful\n", __func__);
>
> return 0;
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> index 84d3a8551b03..9bf8adf466a2 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> @@ -175,7 +175,7 @@ static void dwmac4_dma_init(void __iomem *ioaddr,
>
> value = readl(ioaddr + DMA_BUS_MODE);
>
> - if (dma_cfg->multi_msi_en) {
> + if (dma_cfg->perch_irq_en) {
> value &= ~DMA_BUS_MODE_INTM_MASK;
> value |= (DMA_BUS_MODE_INTM_MODE1 << DMA_BUS_MODE_INTM_SHIFT);
> }
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 15ed3947361b..4ed5c976c7a3 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -125,11 +125,11 @@ module_param(chain_mode, int, 0444);
> MODULE_PARM_DESC(chain_mode, "To use chain instead of ring mode");
>
> static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
> -/* For MSI interrupts handling */
> +/* For multi interrupts handling */
> static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id);
> static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id);
> -static irqreturn_t stmmac_msi_intr_tx(int irq, void *data);
> -static irqreturn_t stmmac_msi_intr_rx(int irq, void *data);
> +static irqreturn_t stmmac_queue_intr_tx(int irq, void *data);
> +static irqreturn_t stmmac_queue_intr_rx(int irq, void *data);
> static void stmmac_reset_rx_queue(struct stmmac_priv *priv, u32 queue);
> static void stmmac_reset_tx_queue(struct stmmac_priv *priv, u32 queue);
> static void stmmac_reset_queues_param(struct stmmac_priv *priv);
> @@ -3513,7 +3513,7 @@ static void stmmac_free_irq(struct net_device *dev,
> }
> }
>
> -static int stmmac_request_irq_multi_msi(struct net_device *dev)
> +static int stmmac_request_irq_multi(struct net_device *dev)
What mean "irq_multi". You change previously "multi_msi" by "perch_irq",
maybe you could do something with this "perch" naming ?
> {
> struct stmmac_priv *priv = netdev_priv(dev);
> enum request_irq_err irq_err;
> @@ -3530,7 +3530,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> 0, int_name, dev);
> if (unlikely(ret < 0)) {
> netdev_err(priv->dev,
> - "%s: alloc mac MSI %d (error: %d)\n",
> + "%s: alloc mac irq %d (error: %d)\n",
> __func__, dev->irq, ret);
> irq_err = REQ_IRQ_ERR_MAC;
> goto irq_error;
> @@ -3547,7 +3547,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> 0, int_name, dev);
> if (unlikely(ret < 0)) {
> netdev_err(priv->dev,
> - "%s: alloc wol MSI %d (error: %d)\n",
> + "%s: alloc wol irq %d (error: %d)\n",
> __func__, priv->wol_irq, ret);
> irq_err = REQ_IRQ_ERR_WOL;
> goto irq_error;
> @@ -3565,7 +3565,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> 0, int_name, dev);
> if (unlikely(ret < 0)) {
> netdev_err(priv->dev,
> - "%s: alloc lpi MSI %d (error: %d)\n",
> + "%s: alloc lpi irq %d (error: %d)\n",
> __func__, priv->lpi_irq, ret);
> irq_err = REQ_IRQ_ERR_LPI;
> goto irq_error;
> @@ -3583,7 +3583,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> 0, int_name, dev);
> if (unlikely(ret < 0)) {
> netdev_err(priv->dev,
> - "%s: alloc sfty ce MSI %d (error: %d)\n",
> + "%s: alloc sfty ce irq %d (error: %d)\n",
> __func__, priv->sfty_ce_irq, ret);
> irq_err = REQ_IRQ_ERR_SFTY_CE;
> goto irq_error;
> @@ -3601,14 +3601,14 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> 0, int_name, dev);
> if (unlikely(ret < 0)) {
> netdev_err(priv->dev,
> - "%s: alloc sfty ue MSI %d (error: %d)\n",
> + "%s: alloc sfty ue irq %d (error: %d)\n",
> __func__, priv->sfty_ue_irq, ret);
> irq_err = REQ_IRQ_ERR_SFTY_UE;
> goto irq_error;
> }
> }
>
> - /* Request Rx MSI irq */
> + /* Request Rx queue irq */
> for (i = 0; i < priv->plat->rx_queues_to_use; i++) {
> if (i >= MTL_MAX_RX_QUEUES)
> break;
> @@ -3618,11 +3618,11 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> int_name = priv->int_name_rx_irq[i];
> sprintf(int_name, "%s:%s-%d", dev->name, "rx", i);
> ret = request_irq(priv->rx_irq[i],
> - stmmac_msi_intr_rx,
> + stmmac_queue_intr_rx,
> 0, int_name, &priv->dma_conf.rx_queue[i]);
> if (unlikely(ret < 0)) {
> netdev_err(priv->dev,
> - "%s: alloc rx-%d MSI %d (error: %d)\n",
> + "%s: alloc rx-%d irq %d (error: %d)\n",
> __func__, i, priv->rx_irq[i], ret);
> irq_err = REQ_IRQ_ERR_RX;
> irq_idx = i;
> @@ -3633,7 +3633,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> irq_set_affinity_hint(priv->rx_irq[i], &cpu_mask);
> }
>
> - /* Request Tx MSI irq */
> + /* Request Tx queue irq */
> for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
> if (i >= MTL_MAX_TX_QUEUES)
> break;
> @@ -3643,11 +3643,11 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> int_name = priv->int_name_tx_irq[i];
> sprintf(int_name, "%s:%s-%d", dev->name, "tx", i);
> ret = request_irq(priv->tx_irq[i],
> - stmmac_msi_intr_tx,
> + stmmac_queue_intr_tx,
> 0, int_name, &priv->dma_conf.tx_queue[i]);
> if (unlikely(ret < 0)) {
> netdev_err(priv->dev,
> - "%s: alloc tx-%d MSI %d (error: %d)\n",
> + "%s: alloc tx-%d irq %d (error: %d)\n",
> __func__, i, priv->tx_irq[i], ret);
> irq_err = REQ_IRQ_ERR_TX;
> irq_idx = i;
> @@ -3722,8 +3722,8 @@ static int stmmac_request_irq(struct net_device *dev)
> int ret;
>
> /* Request the IRQ lines */
> - if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN)
> - ret = stmmac_request_irq_multi_msi(dev);
> + if (priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN)
> + ret = stmmac_request_irq_multi(dev);
> else
> ret = stmmac_request_irq_single(dev);
>
> @@ -5938,7 +5938,7 @@ static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id)
> return IRQ_HANDLED;
> }
>
> -static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
> +static irqreturn_t stmmac_queue_intr_tx(int irq, void *data)
> {
> struct stmmac_tx_queue *tx_q = (struct stmmac_tx_queue *)data;
> struct stmmac_dma_conf *dma_conf;
> @@ -5970,7 +5970,7 @@ static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
> return IRQ_HANDLED;
> }
>
> -static irqreturn_t stmmac_msi_intr_rx(int irq, void *data)
> +static irqreturn_t stmmac_queue_intr_rx(int irq, void *data)
> {
> struct stmmac_rx_queue *rx_q = (struct stmmac_rx_queue *)data;
> struct stmmac_dma_conf *dma_conf;
> @@ -6007,12 +6007,12 @@ static void stmmac_poll_controller(struct net_device *dev)
> if (test_bit(STMMAC_DOWN, &priv->state))
> return;
>
> - if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN) {
> + if (priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN) {
> for (i = 0; i < priv->plat->rx_queues_to_use; i++)
> - stmmac_msi_intr_rx(0, &priv->dma_conf.rx_queue[i]);
> + stmmac_queue_intr_rx(0, &priv->dma_conf.rx_queue[i]);
>
> for (i = 0; i < priv->plat->tx_queues_to_use; i++)
> - stmmac_msi_intr_tx(0, &priv->dma_conf.tx_queue[i]);
> + stmmac_queue_intr_tx(0, &priv->dma_conf.tx_queue[i]);
> } else {
> disable_irq(dev->irq);
> stmmac_interrupt(dev->irq, dev);
> @@ -7278,8 +7278,8 @@ int stmmac_dvr_probe(struct device *device,
> priv->plat = plat_dat;
> priv->ioaddr = res->addr;
> priv->dev->base_addr = (unsigned long)res->addr;
> - priv->plat->dma_cfg->multi_msi_en =
> - (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN);
> + priv->plat->dma_cfg->perch_irq_en =
> + (priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN);
>
> priv->dev->irq = res->irq;
> priv->wol_irq = res->wol_irq;
> diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> index 11671fd6adee..76249117c0ff 100644
> --- a/include/linux/stmmac.h
> +++ b/include/linux/stmmac.h
> @@ -96,7 +96,7 @@ struct stmmac_dma_cfg {
> int mixed_burst;
> bool aal;
> bool eame;
> - bool multi_msi_en;
> + bool perch_irq_en;
> bool dche;
> };
>
> @@ -211,7 +211,7 @@ struct dwmac4_addrs {
> #define STMMAC_FLAG_TSO_EN BIT(4)
> #define STMMAC_FLAG_SERDES_UP_AFTER_PHY_LINKUP BIT(5)
> #define STMMAC_FLAG_VLAN_FAIL_Q_EN BIT(6)
> -#define STMMAC_FLAG_MULTI_MSI_EN BIT(7)
> +#define STMMAC_FLAG_PERCH_IRQ_EN BIT(7)
> #define STMMAC_FLAG_EXT_SNAPSHOT_EN BIT(8)
> #define STMMAC_FLAG_INT_SNAPSHOT_EN BIT(9)
> #define STMMAC_FLAG_RX_CLK_RUNS_IN_LPI BIT(10)
next prev parent reply other threads:[~2023-08-10 14:50 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-09 16:49 [PATCH net-next v3 00/10] net: stmmac: add new features to xgmac Jisheng Zhang
2023-08-09 16:49 ` [PATCH net-next v3 01/10] net: stmmac: correct RX COE parsing for xgmac Jisheng Zhang
2023-08-10 13:45 ` Alexandre TORGUE
2023-08-09 16:49 ` [PATCH net-next v3 02/10] net: stmmac: xgmac: add more feature parsing from hw cap Jisheng Zhang
2023-08-10 13:46 ` Alexandre TORGUE
2023-08-09 16:50 ` [PATCH net-next v3 03/10] net: stmmac: mdio: enlarge the max XGMAC C22 ADDR to 31 Jisheng Zhang
2023-08-10 13:46 ` Alexandre TORGUE
2023-08-09 16:50 ` [PATCH net-next v3 04/10] net: stmmac: enlarge max rx/tx queues and channels to 16 Jisheng Zhang
2023-08-10 14:43 ` Alexandre TORGUE
2023-08-09 16:50 ` [PATCH net-next v3 05/10] net: stmmac: reflect multi irqs for tx/rx channels and mac and safety Jisheng Zhang
2023-08-10 14:50 ` Alexandre TORGUE [this message]
2023-08-10 16:02 ` Jisheng Zhang
2023-08-09 16:50 ` [PATCH net-next v3 06/10] net: stmmac: xgmac: support per-channel irq Jisheng Zhang
2023-08-10 14:52 ` Alexandre TORGUE
2023-08-16 15:52 ` Jisheng Zhang
2023-08-09 16:50 ` [PATCH net-next v3 07/10] dt-bindings: net: snps,dwmac: add safety irq support Jisheng Zhang
2023-08-15 21:09 ` Krzysztof Kozlowski
2023-08-09 16:50 ` [PATCH net-next v3 08/10] net: stmmac: platform: support parsing safety irqs from DT Jisheng Zhang
2023-08-10 14:52 ` Alexandre TORGUE
2023-08-09 16:50 ` [PATCH net-next v3 09/10] dt-bindings: net: snps,dwmac: add per channel irq support Jisheng Zhang
2023-08-09 17:38 ` Conor Dooley
2023-08-10 15:45 ` Jisheng Zhang
2023-08-09 16:50 ` [PATCH net-next v3 10/10] net: stmmac: platform: support parsing per channel irq from DT Jisheng Zhang
2023-08-10 14:57 ` Alexandre TORGUE
2023-08-10 16:09 ` Jisheng Zhang
2023-08-10 16:21 ` Jisheng Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cc4ae254-659d-54d6-5007-155390d006d8@foss.st.com \
--to=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=joabreu@synopsys.com \
--cc=jszhang@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=peppe.cavallaro@st.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).