From: Hans de Goede <hdegoede@redhat.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>,
Gregory Clement <gregory.clement@bootlin.com>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, Jens Axboe <axboe@kernel.dk>,
Thomas Gleixner <tglx@linutronix.de>,
Marc Zyngier <marc.zyngier@arm.com>
Cc: devicetree@vger.kernel.org, Baruch Siach <baruch@tkos.co.il>,
Antoine Tenart <antoine.tenart@bootlin.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Nadav Haklai <nadavh@marvell.com>,
linux-ide@vger.kernel.org,
Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 02/10] ata: ahci: Support per-port interrupts
Date: Wed, 6 Mar 2019 16:01:16 +0100 [thread overview]
Message-ID: <cd3e733d-110f-7fa0-a637-6d4bd4475142@redhat.com> (raw)
In-Reply-To: <20190306102146.13005-3-miquel.raynal@bootlin.com>
Hi,
On 06-03-19 11:21, Miquel Raynal wrote:
> Right now the ATA core only allows IPs to use a single interrupt. Some
> of them (for instance the Armada-CP110 one) actually has one interrupt
> per port. Add some logic to support such situation.
>
> We consider that either there is one single interrupt declared in the
> main IP node, or there are per-port interrupts, each of them being
> declared in the port sub-nodes.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
> drivers/ata/acard-ahci.c | 2 +-
> drivers/ata/ahci.c | 8 +++-
> drivers/ata/ahci.h | 3 +-
> drivers/ata/libahci.c | 2 +-
> drivers/ata/libahci_platform.c | 67 ++++++++++++++++++++++++++++------
> drivers/ata/sata_highbank.c | 2 +-
> 6 files changed, 68 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
> index 583e366be7e2..9414b81e994c 100644
> --- a/drivers/ata/acard-ahci.c
> +++ b/drivers/ata/acard-ahci.c
> @@ -434,7 +434,7 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
> if (!hpriv)
> return -ENOMEM;
>
> - hpriv->irq = pdev->irq;
> + hpriv->irqs[0] = pdev->irq;
> hpriv->flags |= (unsigned long)pi.private_data;
>
> if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
> diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
> index 021ce46e2e57..bc37a34fa043 100644
> --- a/drivers/ata/ahci.c
> +++ b/drivers/ata/ahci.c
> @@ -1817,7 +1817,13 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
> /* legacy intx interrupts */
> pci_intx(pdev, 1);
> }
> - hpriv->irq = pci_irq_vector(pdev, 0);
> +
> + hpriv->irqs = devm_kzalloc(dev, sizeof(*hpriv->irqs) * n_ports,
> + GFP_KERNEL);
> + if (!hpriv->irqs)
> + return -ENOMEM;
> +
> + hpriv->irqs[0] = pci_irq_vector(pdev, 0);
>
> if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
> host->flags |= ATA_HOST_PARALLEL_SCAN;
> diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
> index 8810475f307a..f569f6a0d9f5 100644
> --- a/drivers/ata/ahci.h
> +++ b/drivers/ata/ahci.h
> @@ -363,7 +363,7 @@ struct ahci_host_priv {
> struct phy **phys;
> unsigned nports; /* Number of ports */
> void *plat_data; /* Other platform data */
> - unsigned int irq; /* interrupt line */
> + unsigned int *irqs; /* interrupt line(s) */
> /*
> * Optional ahci_start_engine override, if not set this gets set to the
> * default ahci_start_engine during ahci_save_initial_config, this can
> @@ -434,6 +434,7 @@ void ahci_print_info(struct ata_host *host, const char *scc_s);
> int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht);
> void ahci_error_handler(struct ata_port *ap);
> u32 ahci_handle_port_intr(struct ata_host *host, u32 irq_masked);
> +int ahci_get_per_port_irq_vector(struct ata_host *host, int port);
>
> static inline void __iomem *__ahci_port_base(struct ata_host *host,
> unsigned int port_no)
> diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
> index 66d4906a5013..25970138a65a 100644
> --- a/drivers/ata/libahci.c
> +++ b/drivers/ata/libahci.c
> @@ -2602,7 +2602,7 @@ static int ahci_host_activate_multi_irqs(struct ata_host *host,
> int ahci_host_activate(struct ata_host *host, struct scsi_host_template *sht)
> {
> struct ahci_host_priv *hpriv = host->private_data;
> - int irq = hpriv->irq;
> + int irq = hpriv->irqs[0];
> int rc;
>
> if (hpriv->flags & AHCI_HFLAG_MULTI_MSI) {
> diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
> index 81b1a3332ed6..673d355a59ab 100644
> --- a/drivers/ata/libahci_platform.c
> +++ b/drivers/ata/libahci_platform.c
> @@ -24,6 +24,7 @@
> #include <linux/ahci_platform.h>
> #include <linux/phy/phy.h>
> #include <linux/pm_runtime.h>
> +#include <linux/of_irq.h>
> #include <linux/of_platform.h>
> #include <linux/reset.h>
> #include "ahci.h"
> @@ -95,6 +96,14 @@ static void ahci_platform_disable_phys(struct ahci_host_priv *hpriv)
> }
> }
>
> +int ahci_get_per_port_irq_vector(struct ata_host *host, int port)
> +{
> + struct ahci_host_priv *hpriv = host->private_data;
> +
> + return hpriv->irqs[port];
> +}
> +EXPORT_SYMBOL_GPL(ahci_get_per_port_irq_vector);
> +
> /**
> * ahci_platform_enable_clks - Enable platform clocks
> * @hpriv: host private area to store config values
> @@ -385,6 +394,7 @@ static int ahci_platform_get_regulator(struct ahci_host_priv *hpriv, u32 port,
> * or for non devicetree enabled platforms a single clock
> * 4) resets, if flags has AHCI_PLATFORM_GET_RESETS (optional)
> * 5) phys (optional)
> + * 6) interrupt(s)
> *
> * RETURNS:
> * The allocated ahci_host_priv on success, otherwise an ERR_PTR value
> @@ -396,7 +406,7 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
> struct ahci_host_priv *hpriv;
> struct clk *clk;
> struct device_node *child;
> - int i, enabled_ports = 0, rc = -ENOMEM, child_nodes;
> + int i, enabled_ports = 0, rc = -ENOMEM, child_nodes, ctrl_irq;
> u32 mask_port_map = 0;
>
> if (!devres_open_group(dev, NULL, GFP_KERNEL))
> @@ -489,10 +499,30 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
> goto err_out;
> }
>
> + hpriv->irqs = devm_kzalloc(dev, sizeof(*hpriv->irqs) * hpriv->nports,
> + GFP_KERNEL);
> + if (!hpriv->irqs) {
> + rc = -ENOMEM;
> + goto err_out;
> + }
> +
> + ctrl_irq = platform_get_irq(pdev, 0);
> + if (ctrl_irq < 0) {
> + if (ctrl_irq == -EPROBE_DEFER) {
> + rc = ctrl_irq;
> + goto err_out;
> + }
> + ctrl_irq = 0;
> + }
> +
> + if (ctrl_irq > 0)
> + hpriv->irqs[0] = ctrl_irq;
> +
> if (child_nodes) {
> for_each_child_of_node(dev->of_node, child) {
> u32 port;
> struct platform_device *port_dev __maybe_unused;
> + int port_irq;
>
> if (!of_device_is_available(child))
> continue;
> @@ -521,6 +551,18 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
> }
> #endif
>
> + if (!ctrl_irq) {
> + port_irq = of_irq_get(child, 0);
> + if (!port_irq)
> + port_irq = -EINVAL;
> + if (port_irq < 0) {
> + rc = port_irq;
> + goto err_out;
> + }
> +
> + hpriv->irqs[port] = port_irq;
> + }
> +
> rc = ahci_platform_get_phy(hpriv, port, dev, child);
> if (rc)
> goto err_out;
> @@ -548,6 +590,18 @@ struct ahci_host_priv *ahci_platform_get_resources(struct platform_device *pdev,
> if (rc == -EPROBE_DEFER)
> goto err_out;
> }
> +
> + if (!ctrl_irq && !enabled_ports) {
> + dev_err(&pdev->dev, "No IRQ defined\n");
> + rc = -ENODEV;
> + goto err_out;
> + }
> +
> + if (enabled_ports > 1) {
> + hpriv->flags |= AHCI_HFLAG_MULTI_MSI;
> + hpriv->get_irq_vector = ahci_get_per_port_irq_vector;
> + }
> +
I believe that the "if (enabled_ports > 1)" here needs to be:
if (!ctrl_irq && enabled_ports > 1) {
Otherwise existing boards which use a single irq defined at the
main of_node level for the device and have defined more then 1
child-node in their DTB will now get AHCI_HFLAG_MULTI_MSI set,
but they will only have hpriv->irqs[0] set to the ctrl_irq
leading to returning of 0 as irq from ahci_get_per_port_irq_vector
for the other ports, which is wrong.
Otherwise this patch looks good to me, so with this fixed
(assuming you agree) you may add my:
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
to the next version of this patch.
The rest of the patches in this series are outside my area
of expertise.
Regards.
Hans
> pm_runtime_enable(dev);
> pm_runtime_get_sync(dev);
> hpriv->got_runtime_pm = true;
> @@ -584,16 +638,7 @@ int ahci_platform_init_host(struct platform_device *pdev,
> struct ata_port_info pi = *pi_template;
> const struct ata_port_info *ppi[] = { &pi, NULL };
> struct ata_host *host;
> - int i, irq, n_ports, rc;
> -
> - irq = platform_get_irq(pdev, 0);
> - if (irq <= 0) {
> - if (irq != -EPROBE_DEFER)
> - dev_err(dev, "no irq\n");
> - return irq;
> - }
> -
> - hpriv->irq = irq;
> + int i, n_ports, rc;
>
> /* prepare host */
> pi.private_data = (void *)(unsigned long)hpriv->flags;
> diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
> index c8fc9280d6e4..dcfdab20021b 100644
> --- a/drivers/ata/sata_highbank.c
> +++ b/drivers/ata/sata_highbank.c
> @@ -496,7 +496,7 @@ static int ahci_highbank_probe(struct platform_device *pdev)
> return -ENOMEM;
> }
>
> - hpriv->irq = irq;
> + hpriv->irqs[0] = irq;
> hpriv->flags |= (unsigned long)pi.private_data;
>
> hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
>
next prev parent reply other threads:[~2019-03-06 15:01 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-06 10:21 [PATCH v2 00/10] Enable per-port SATA interrupts and drop an hack in the IRQ subsystem Miquel Raynal
2019-03-06 10:21 ` [PATCH v2 01/10] ata: libahci: Ensure the host interrupt status bits are cleared Miquel Raynal
2019-03-07 16:25 ` Marc Zyngier
2019-03-07 17:19 ` Miquel Raynal
2019-03-06 10:21 ` [PATCH v2 02/10] ata: ahci: Support per-port interrupts Miquel Raynal
2019-03-06 15:01 ` Hans de Goede [this message]
2019-03-07 7:58 ` Miquel Raynal
2019-03-06 10:21 ` [PATCH v2 03/10] dt-bindings: ata: Update ahci bindings with possible " Miquel Raynal
2019-03-12 19:05 ` Rob Herring
2019-03-06 10:21 ` [PATCH v2 04/10] ata: ahci: mvebu: Rename a platform data flag Miquel Raynal
2019-03-06 10:21 ` [PATCH v2 05/10] ata: ahci: mvebu: Add a parameter to a platform data callback Miquel Raynal
2019-03-06 10:21 ` [PATCH v2 06/10] dt-bindings: ata: Update ahci_mvebu bindings Miquel Raynal
2019-03-12 19:06 ` Rob Herring
2019-03-06 10:21 ` [PATCH v2 07/10] ata: ahci: mvebu: Support A8k compatible Miquel Raynal
2019-03-06 10:21 ` [PATCH v2 08/10] ata: ahci: mvebu: Add support for A8k legacy bindings Miquel Raynal
2019-03-07 16:31 ` Marc Zyngier
2019-03-06 10:21 ` [PATCH v2 09/10] irqchip/irq-mvebu-icu: Remove the double SATA ports interrupt hack Miquel Raynal
2019-03-06 10:21 ` [PATCH v2 10/10] arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts Miquel Raynal
2019-03-06 10:30 ` Baruch Siach
2019-03-06 10:34 ` Miquel Raynal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cd3e733d-110f-7fa0-a637-6d4bd4475142@redhat.com \
--to=hdegoede@redhat.com \
--cc=andrew@lunn.ch \
--cc=antoine.tenart@bootlin.com \
--cc=axboe@kernel.dk \
--cc=baruch@tkos.co.il \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-ide@vger.kernel.org \
--cc=marc.zyngier@arm.com \
--cc=mark.rutland@arm.com \
--cc=maxime.chevallier@bootlin.com \
--cc=miquel.raynal@bootlin.com \
--cc=nadavh@marvell.com \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=tglx@linutronix.de \
--cc=thomas.petazzoni@bootlin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).