Re: [PATCH 2/2] ARM: dts: aspeed: Add ASRock E3C256D4I BMC

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 14/11/2023 12:27, Zev Weiss wrote:
> Like the E3C246D4I, this is a reasonably affordable off-the-shelf
> mini-ITX AST2500/Xeon motherboard with good potential as an OpenBMC
> development platform.  Booting the host requires a modicum of eSPI
> support that's not yet in the mainline kernel, but most other basic
> BMC functionality is available with this device-tree.
> 
> Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
> ---
>  arch/arm/boot/dts/aspeed/Makefile             |   1 +
>  .../aspeed/aspeed-bmc-asrock-e3c256d4i.dts    | 314 ++++++++++++++++++
>  2 files changed, 315 insertions(+)
>  create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
> 
> diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
> index d3ac20e316d0..3398ee53f034 100644
> --- a/arch/arm/boot/dts/aspeed/Makefile
> +++ b/arch/arm/boot/dts/aspeed/Makefile
> @@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
>  	aspeed-bmc-ampere-mtmitchell.dtb \
>  	aspeed-bmc-arm-stardragon4800-rep2.dtb \
>  	aspeed-bmc-asrock-e3c246d4i.dtb \
> +	aspeed-bmc-asrock-e3c256d4i.dtb \
>  	aspeed-bmc-asrock-romed8hm3.dtb \
>  	aspeed-bmc-bytedance-g220a.dtb \
>  	aspeed-bmc-delta-ahe50dc.dtb \
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
> new file mode 100644
> index 000000000000..4c55272afd4f
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
> @@ -0,0 +1,314 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/dts-v1/;
> +
> +#include "aspeed-g5.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/watchdog/aspeed-wdt.h>
> +
> +/{
> +	model = "ASRock E3C256D4I BMC";
> +	compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500";
> +
> +	aliases {
> +		serial4 = &uart5;
> +
> +		i2c20 = &i2c2mux0ch0;
> +		i2c21 = &i2c2mux0ch1;
> +		i2c22 = &i2c2mux0ch2;
> +		i2c23 = &i2c2mux0ch3;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart5;
> +		bootargs = "console=tty0 console=ttyS4,115200 earlycon";

Drop bootargs.

> +	};
> +
> +	memory@80000000 {
> +		reg = <0x80000000 0x20000000>;
> +	};
> +
> +	leds {
> +		compatible = "gpio-leds";
> +
> +		heartbeat {

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).

> +			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
> +			linux,default-trigger = "timer";

Missing function and color.


Best regards,
Krzysztof