[PATCH v2 0/3] Enable IPQ9574 TSENS support

[PATCH v2 0/3] Enable IPQ9574 TSENS support

[Varadarajan Narayanan]

This patch set enables tsens in IPQ9574

Depends on
	https://lore.kernel.org/linux-arm-msm/20230406061314.10916-1-quic_devipriy@quicinc.com/
[v2]:
	Drop the driver change (https://lore.kernel.org/lkml/b45d33d38a334aabbd52c83b0d6028af1f4c74c8.1682682753.git.quic_varada@quicinc.com/)
	since the tsens device is compatible with 8074's tsens
	and use 8074's compatible itself

	Rename clusterX nodes as cpussX

[v1]:
	Fix DT node names

[v0]:
	Initial patch introducing TSENS support

Praveenkumar I (1):
  dt-bindings: thermal: tsens: Add ipq9574 compatible

Varadarajan Narayanan (2):
  arm64: dts: qcom: ipq9574: add tsens node
  arm64: dts: qcom: ipq9574: add thermal zone nodes

 .../devicetree/bindings/thermal/qcom-tsens.yaml    |   9 +-
 arch/arm64/boot/dts/qcom/ipq9574.dtsi              | 217 +++++++++++++++++++++
 2 files changed, 224 insertions(+), 2 deletions(-)

-- 
2.7.4

[PATCH v2 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible

[Varadarajan Narayanan]

From: Praveenkumar I <quic_ipkumar@quicinc.com>

Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
[v2]:
	Thanks to Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
	for the tip to make qcom,ipq8074-tsens as fallback.
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d1ec963..ea67cf9 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -64,8 +64,11 @@ properties:
           - const: qcom,tsens-v2
 
       - description: v2 of TSENS with combined interrupt
-        enum:
-          - qcom,ipq8074-tsens
+        - const: qcom,ipq8074-tsens
+        - items:
+          - enum:
+              - qcom,ipq9574-tsens
+          - const: qcom,ipq8074-tsens
 
   reg:
     items:
@@ -277,6 +280,7 @@ allOf:
           contains:
             enum:
               - qcom,ipq8074-tsens
+              - qcom,ipq9574-tsens
     then:
       properties:
         interrupts:
@@ -292,6 +296,7 @@ allOf:
           contains:
             enum:
               - qcom,ipq8074-tsens
+              - qcom,ipq9574-tsens
               - qcom,tsens-v0_1
               - qcom,tsens-v1
               - qcom,tsens-v2
-- 
2.7.4

Re: [PATCH v2 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible

[Rob Herring]

On Mon, 08 May 2023 11:02:38 +0530, Varadarajan Narayanan wrote:
> From: Praveenkumar I <quic_ipkumar@quicinc.com>
> 
> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.
> 
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> [v2]:
> 	Thanks to Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 	for the tip to make qcom,ipq8074-tsens as fallback.
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/thermal/qcom-tsens.yaml:67:9: [error] syntax error: expected <block end>, but found '-' (syntax)
./Documentation/devicetree/bindings/thermal/qcom-tsens.yaml:69:11: [warning] wrong indentation: expected 12 but found 10 (indentation)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/thermal/qcom-tsens.example.dts'
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml:67:9: did not find expected key
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/thermal/qcom-tsens.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml
./Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml
./Documentation/devicetree/bindings/thermal/qcom-tsens.yaml:67:9: did not find expected key
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml: ignoring, error parsing file
make: *** [Makefile:1512: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):
Documentation/usb/gadget_uvc.rst: Documentation/userspace-api/media/v4l/pixfmt-packed.yuv.rst
MAINTAINERS: Documentation/devicetree/bindings/pwm/pwm-apple.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/345a61f6cd56e504e1f82ac2328ffa6d89e2d510.1683523370.git.quic_varada@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v2 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible

[Krzysztof Kozlowski]

On 08/05/2023 07:32, Varadarajan Narayanan wrote:
> From: Praveenkumar I <quic_ipkumar@quicinc.com>
> 
> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.
> 
> Acked-by: Rob Herring <robh@kernel.org>

Drop the ack, it's a bigger change.

> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> [v2]:
> 	Thanks to Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 	for the tip to make qcom,ipq8074-tsens as fallback.
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> index d1ec963..ea67cf9 100644
> --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
> @@ -64,8 +64,11 @@ properties:
>            - const: qcom,tsens-v2
>  
>        - description: v2 of TSENS with combined interrupt
> -        enum:
> -          - qcom,ipq8074-tsens
> +        - const: qcom,ipq8074-tsens
> +        - items:
> +          - enum:

Please test the patch after changes and before sending. Missing indent
which test would point out.

Best regards,
Krzysztof

Re: [PATCH v2 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible

[Krzysztof Kozlowski]

On Mon, 08 May 2023 11:02:38 +0530, Varadarajan Narayanan wrote:
> From: Praveenkumar I <quic_ipkumar@quicinc.com>
> 
> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.
> 
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> [v2]:
> 	Thanks to Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 	for the tip to make qcom,ipq8074-tsens as fallback.
> ---
>  Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/thermal/qcom-tsens.yaml:67:9: [error] syntax error: expected <block end>, but found '-' (syntax)
./Documentation/devicetree/bindings/thermal/qcom-tsens.yaml:69:11: [warning] wrong indentation: expected 12 but found 10 (indentation)

dtschema/dtc warnings/errors:
make[1]: *** Deleting file 'Documentation/devicetree/bindings/thermal/qcom-tsens.example.dts'
Documentation/devicetree/bindings/thermal/qcom-tsens.yaml:67:9: did not find expected key
make[1]: *** [Documentation/devicetree/bindings/Makefile:26: Documentation/devicetree/bindings/thermal/qcom-tsens.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
./Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml
./Documentation/devicetree/bindings/clock/qcom,gcc-ipq8064.yaml: Unable to find schema file matching $id: http://devicetree.org/schemas/thermal/qcom-tsens.yaml
./Documentation/devicetree/bindings/thermal/qcom-tsens.yaml:67:9: did not find expected key
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml: ignoring, error parsing file
make: *** [Makefile:1512: dt_binding_check] Error 2

doc reference errors (make refcheckdocs):
Documentation/usb/gadget_uvc.rst: Documentation/userspace-api/media/v4l/pixfmt-packed.yuv.rst
MAINTAINERS: Documentation/devicetree/bindings/pwm/pwm-apple.yaml

See https://patchwork.ozlabs.org/patch/1778256

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

[PATCH v2 2/3] arm64: dts: qcom: ipq9574: add tsens node

[Varadarajan Narayanan]

IPQ9574 has a tsens v2.3.1 peripheral which monitors temperatures
around the various subsystems on the die.

Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
[v2]:
	Add "qcom,ipq8074-tsens" as fallback compatible
---
 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 93e3026..85bba6a 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -1056,6 +1056,15 @@
 			status = "disabled";
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens";
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
 	};
 
 	timer {
-- 
2.7.4

Re: [PATCH v2 2/3] arm64: dts: qcom: ipq9574: add tsens node

[Dmitry Baryshkov]

On 08/05/2023 08:32, Varadarajan Narayanan wrote:
> IPQ9574 has a tsens v2.3.1 peripheral which monitors temperatures
> around the various subsystems on the die.
> 
> Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> [v2]:
> 	Add "qcom,ipq8074-tsens" as fallback compatible
> ---
>   arch/arm64/boot/dts/qcom/ipq9574.dtsi | 9 +++++++++
>   1 file changed, 9 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

[PATCH v2 3/3] arm64: dts: qcom: ipq9574: add thermal zone nodes

[Varadarajan Narayanan]

This patch adds thermal zone nodes for the various
sensors present in IPQ9574

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
[v2]:
	Rename clusterX nodes as cpussX nodes

[v1]:
	Fix node names
---
 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++
 1 file changed, 208 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 85bba6a..5a29ee7 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -1067,6 +1067,214 @@
 		};
 	};
 
+	thermal-zones {
+		nss-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				nss-top-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				ubi_0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				ubi_1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				ubi_2-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				ubi_3-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		wcss-phyb-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				wcss_phyb-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top_glue-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- 
2.7.4

Re: [PATCH v2 3/3] arm64: dts: qcom: ipq9574: add thermal zone nodes

[Konrad Dybcio]

On 8.05.2023 07:32, Varadarajan Narayanan wrote:
> This patch adds thermal zone nodes for the various
> sensors present in IPQ9574
> 
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> [v2]:
> 	Rename clusterX nodes as cpussX nodes
> 
> [v1]:
> 	Fix node names
> ---
>  arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++
>  1 file changed, 208 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 85bba6a..5a29ee7 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -1067,6 +1067,214 @@
>  		};
>  	};
>  
> +	thermal-zones {
> +		nss-top-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 3>;
> +
> +			trips {
> +				nss-top-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 4>;
> +
> +			trips {
> +				ubi_0-critical {
no underscores in node names

Konrad
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 5>;
> +
> +			trips {
> +				ubi_1-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-2-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 6>;
> +
> +			trips {
> +				ubi_2-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		ubi-3-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 7>;
> +
> +			trips {
> +				ubi_3-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpuss0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 8>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpuss1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 9>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		cpu0-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 10>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpu1-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 11>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpu2-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 12>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		cpu3-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 13>;
> +
> +			trips {
> +				cpu-critical {
> +					temperature = <120000>;
> +					hysteresis = <10000>;
> +					type = "critical";
> +				};
> +
> +				cpu-passive {
> +					temperature = <110000>;
> +					hysteresis = <1000>;
> +					type = "passive";
> +				};
> +			};
> +		};
> +
> +		wcss-phyb-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 14>;
> +
> +			trips {
> +				wcss_phyb-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		top-glue-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&tsens 15>;
> +
> +			trips {
> +				top_glue-critical {
> +					temperature = <125000>;
> +					hysteresis = <1000>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +	};
> +
>  	timer {
>  		compatible = "arm,armv8-timer";
>  		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,