From: Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Jerome Brunet <jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>,
Linus Walleij
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
Thomas Gleixner <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Neil Armstrong
<narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org"
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH RfC v4 1/6] pinctrl: meson: add interrupts to pinctrl data
Date: Sun, 28 May 2017 21:10:05 +0200 [thread overview]
Message-ID: <ce04b62c-5f38-4d73-b9bc-4ba58ced779d@gmail.com> (raw)
In-Reply-To: <49ab677f-3165-d6f5-75f5-a963879e8ecf-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
From: Jerome Brunet <jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Add GPIO interrupt information to pinctrl data. Added to the original
version from Jerome was data for Meson GXL.
Signed-off-by: Jerome Brunet <jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Signed-off-by: Heiner Kallweit <hkallweit1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
v2:
- no changes
v3:
- no changes
v4:
- no changes
---
drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 22 ++++++++++----------
drivers/pinctrl/meson/pinctrl-meson-gxl.c | 20 +++++++++----------
drivers/pinctrl/meson/pinctrl-meson.h | 15 +++++++++-----
drivers/pinctrl/meson/pinctrl-meson8.c | 20 +++++++++----------
drivers/pinctrl/meson/pinctrl-meson8b.c | 32 ++++++++++++++++++++----------
5 files changed, 63 insertions(+), 46 deletions(-)
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
index 9b00be15..e54dbeaa 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxbb.c
@@ -782,20 +782,20 @@ static struct meson_pmx_func meson_gxbb_aobus_functions[] = {
};
static struct meson_bank meson_gxbb_periphs_banks[] = {
- /* name first last pullen pull dir out in */
- BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_22, EE_OFF), 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
- BANK("Y", PIN(GPIOY_0, EE_OFF), PIN(GPIOY_16, EE_OFF), 1, 0, 1, 0, 3, 0, 4, 0, 5, 0),
- BANK("DV", PIN(GPIODV_0, EE_OFF), PIN(GPIODV_29, EE_OFF), 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
- BANK("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_3, EE_OFF), 1, 20, 1, 20, 3, 20, 4, 20, 5, 20),
- BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
- BANK("CARD", PIN(CARD_0, EE_OFF), PIN(CARD_6, EE_OFF), 2, 20, 2, 20, 6, 20, 7, 20, 8, 20),
- BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_17, EE_OFF), 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
- BANK("CLK", PIN(GPIOCLK_0, EE_OFF), PIN(GPIOCLK_3, EE_OFF), 3, 28, 3, 28, 9, 28, 10, 28, 11, 28),
+ /* name first last irq pullen pull dir out in */
+ BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_22, EE_OFF), 106, 128, 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
+ BANK("Y", PIN(GPIOY_0, EE_OFF), PIN(GPIOY_16, EE_OFF), 89, 105, 1, 0, 1, 0, 3, 0, 4, 0, 5, 0),
+ BANK("DV", PIN(GPIODV_0, EE_OFF), PIN(GPIODV_29, EE_OFF), 59, 88, 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
+ BANK("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_3, EE_OFF), 30, 33, 1, 20, 1, 20, 3, 20, 4, 20, 5, 20),
+ BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 14, 29, 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
+ BANK("CARD", PIN(CARD_0, EE_OFF), PIN(CARD_6, EE_OFF), 52, 58, 2, 20, 2, 20, 6, 20, 7, 20, 8, 20),
+ BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_17, EE_OFF), 34, 51, 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
+ BANK("CLK", PIN(GPIOCLK_0, EE_OFF), PIN(GPIOCLK_3, EE_OFF), 129, 132, 3, 28, 3, 28, 9, 28, 10, 28, 11, 28),
};
static struct meson_bank meson_gxbb_aobus_banks[] = {
- /* name first last pullen pull dir out in */
- BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_13, 0), 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
+ /* name first last irq pullen pull dir out in */
+ BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_13, 0), 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
};
struct meson_pinctrl_data meson_gxbb_periphs_pinctrl_data = {
diff --git a/drivers/pinctrl/meson/pinctrl-meson-gxl.c b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
index 998210ea..bcd8da10 100644
--- a/drivers/pinctrl/meson/pinctrl-meson-gxl.c
+++ b/drivers/pinctrl/meson/pinctrl-meson-gxl.c
@@ -729,19 +729,19 @@ static struct meson_pmx_func meson_gxl_aobus_functions[] = {
};
static struct meson_bank meson_gxl_periphs_banks[] = {
- /* name first last pullen pull dir out in */
- BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_18, EE_OFF), 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
- BANK("DV", PIN(GPIODV_0, EE_OFF), PIN(GPIODV_29, EE_OFF), 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
- BANK("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_9, EE_OFF), 1, 20, 1, 20, 3, 20, 4, 20, 5, 20),
- BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
- BANK("CARD", PIN(CARD_0, EE_OFF), PIN(CARD_6, EE_OFF), 2, 20, 2, 20, 6, 20, 7, 20, 8, 20),
- BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_15, EE_OFF), 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
- BANK("CLK", PIN(GPIOCLK_0, EE_OFF), PIN(GPIOCLK_1, EE_OFF), 3, 28, 3, 28, 9, 28, 10, 28, 11, 28),
+ /* name first last irq pullen pull dir out in */
+ BANK("X", PIN(GPIOX_0, EE_OFF), PIN(GPIOX_18, EE_OFF), 89, 107, 4, 0, 4, 0, 12, 0, 13, 0, 14, 0),
+ BANK("DV", PIN(GPIODV_0, EE_OFF), PIN(GPIODV_29, EE_OFF), 83, 88, 0, 0, 0, 0, 0, 0, 1, 0, 2, 0),
+ BANK("H", PIN(GPIOH_0, EE_OFF), PIN(GPIOH_9, EE_OFF), 26, 35, 1, 20, 1, 20, 3, 20, 4, 20, 5, 20),
+ BANK("Z", PIN(GPIOZ_0, EE_OFF), PIN(GPIOZ_15, EE_OFF), 10, 25, 3, 0, 3, 0, 9, 0, 10, 0, 11, 0),
+ BANK("CARD", PIN(CARD_0, EE_OFF), PIN(CARD_6, EE_OFF), 52, 58, 2, 20, 2, 20, 6, 20, 7, 20, 8, 20),
+ BANK("BOOT", PIN(BOOT_0, EE_OFF), PIN(BOOT_15, EE_OFF), 36, 51, 2, 0, 2, 0, 6, 0, 7, 0, 8, 0),
+ BANK("CLK", PIN(GPIOCLK_0, EE_OFF), PIN(GPIOCLK_1, EE_OFF), 108, 109, 3, 28, 3, 28, 9, 28, 10, 28, 11, 28),
};
static struct meson_bank meson_gxl_aobus_banks[] = {
- /* name first last pullen pull dir out in */
- BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_9, 0), 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
+ /* name first last irq pullen pull dir out in */
+ BANK("AO", PIN(GPIOAO_0, 0), PIN(GPIOAO_9, 0), 0, 9, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
};
struct meson_pinctrl_data meson_gxl_periphs_pinctrl_data = {
diff --git a/drivers/pinctrl/meson/pinctrl-meson.h b/drivers/pinctrl/meson/pinctrl-meson.h
index 1aa871d5..890f296f 100644
--- a/drivers/pinctrl/meson/pinctrl-meson.h
+++ b/drivers/pinctrl/meson/pinctrl-meson.h
@@ -81,6 +81,7 @@ enum meson_reg_type {
* @name: bank name
* @first: first pin of the bank
* @last: last pin of the bank
+ * @irq: hwirq base number of the bank
* @regs: array of register descriptors
*
* A bank represents a set of pins controlled by a contiguous set of
@@ -92,6 +93,8 @@ struct meson_bank {
const char *name;
unsigned int first;
unsigned int last;
+ int irq_first;
+ int irq_last;
struct meson_reg_desc regs[NUM_REG];
};
@@ -147,12 +150,14 @@ struct meson_pinctrl {
.num_groups = ARRAY_SIZE(fn ## _groups), \
}
-#define BANK(n, f, l, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
+#define BANK(n, f, l, fi, li, per, peb, pr, pb, dr, db, or, ob, ir, ib) \
{ \
- .name = n, \
- .first = f, \
- .last = l, \
- .regs = { \
+ .name = n, \
+ .first = f, \
+ .last = l, \
+ .irq_first = fi, \
+ .irq_last = li, \
+ .regs = { \
[REG_PULLEN] = { per, peb }, \
[REG_PULL] = { pr, pb }, \
[REG_DIR] = { dr, db }, \
diff --git a/drivers/pinctrl/meson/pinctrl-meson8.c b/drivers/pinctrl/meson/pinctrl-meson8.c
index e1bdf1f3..970f6f14 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8.c
@@ -1041,19 +1041,19 @@ static struct meson_pmx_func meson8_aobus_functions[] = {
};
static struct meson_bank meson8_cbus_banks[] = {
- /* name first last pullen pull dir out in */
- BANK("X", PIN(GPIOX_0, 0), PIN(GPIOX_21, 0), 4, 0, 4, 0, 0, 0, 1, 0, 2, 0),
- BANK("Y", PIN(GPIOY_0, 0), PIN(GPIOY_16, 0), 3, 0, 3, 0, 3, 0, 4, 0, 5, 0),
- BANK("DV", PIN(GPIODV_0, 0), PIN(GPIODV_29, 0), 0, 0, 0, 0, 7, 0, 8, 0, 9, 0),
- BANK("H", PIN(GPIOH_0, 0), PIN(GPIOH_9, 0), 1, 16, 1, 16, 9, 19, 10, 19, 11, 19),
- BANK("Z", PIN(GPIOZ_0, 0), PIN(GPIOZ_14, 0), 1, 0, 1, 0, 3, 17, 4, 17, 5, 17),
- BANK("CARD", PIN(CARD_0, 0), PIN(CARD_6, 0), 2, 20, 2, 20, 0, 22, 1, 22, 2, 22),
- BANK("BOOT", PIN(BOOT_0, 0), PIN(BOOT_18, 0), 2, 0, 2, 0, 9, 0, 10, 0, 11, 0),
+ /* name first last irq pullen pull dir out in */
+ BANK("X", PIN(GPIOX_0, 0), PIN(GPIOX_21, 0), 112, 133, 4, 0, 4, 0, 0, 0, 1, 0, 2, 0),
+ BANK("Y", PIN(GPIOY_0, 0), PIN(GPIOY_16, 0), 95, 111, 3, 0, 3, 0, 3, 0, 4, 0, 5, 0),
+ BANK("DV", PIN(GPIODV_0, 0), PIN(GPIODV_29, 0), 65, 94, 0, 0, 0, 0, 7, 0, 8, 0, 9, 0),
+ BANK("H", PIN(GPIOH_0, 0), PIN(GPIOH_9, 0), 29, 38, 1, 16, 1, 16, 9, 19, 10, 19, 11, 19),
+ BANK("Z", PIN(GPIOZ_0, 0), PIN(GPIOZ_14, 0), 14, 28, 1, 0, 1, 0, 3, 17, 4, 17, 5, 17),
+ BANK("CARD", PIN(CARD_0, 0), PIN(CARD_6, 0), 58, 64, 2, 20, 2, 20, 0, 22, 1, 22, 2, 22),
+ BANK("BOOT", PIN(BOOT_0, 0), PIN(BOOT_18, 0), 39, 57, 2, 0, 2, 0, 9, 0, 10, 0, 11, 0),
};
static struct meson_bank meson8_aobus_banks[] = {
- /* name first last pullen pull dir out in */
- BANK("AO", PIN(GPIOAO_0, AO_OFF), PIN(GPIO_TEST_N, AO_OFF), 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
+ /* name first last irq pullen pull dir out in */
+ BANK("AO", PIN(GPIOAO_0, AO_OFF), PIN(GPIO_TEST_N, AO_OFF), 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
};
struct meson_pinctrl_data meson8_cbus_pinctrl_data = {
diff --git a/drivers/pinctrl/meson/pinctrl-meson8b.c b/drivers/pinctrl/meson/pinctrl-meson8b.c
index bf747eb1..71f216b5 100644
--- a/drivers/pinctrl/meson/pinctrl-meson8b.c
+++ b/drivers/pinctrl/meson/pinctrl-meson8b.c
@@ -124,6 +124,12 @@ static const struct pinctrl_pin_desc meson8b_aobus_pins[] = {
MESON_PIN(GPIOAO_11, AO_OFF),
MESON_PIN(GPIOAO_12, AO_OFF),
MESON_PIN(GPIOAO_13, AO_OFF),
+
+ /*
+ * The following 2 pins are not mentionned in the public datasheet
+ * According to this datasheet, they can't be used with the gpio
+ * interrupt controller
+ */
MESON_PIN(GPIO_BSD_EN, AO_OFF),
MESON_PIN(GPIO_TEST_N, AO_OFF),
};
@@ -881,19 +887,25 @@ static struct meson_pmx_func meson8b_aobus_functions[] = {
};
static struct meson_bank meson8b_cbus_banks[] = {
- /* name first last pullen pull dir out in */
- BANK("X", PIN(GPIOX_0, 0), PIN(GPIOX_21, 0), 4, 0, 4, 0, 0, 0, 1, 0, 2, 0),
- BANK("Y", PIN(GPIOY_0, 0), PIN(GPIOY_14, 0), 3, 0, 3, 0, 3, 0, 4, 0, 5, 0),
- BANK("DV", PIN(GPIODV_9, 0), PIN(GPIODV_29, 0), 0, 0, 0, 0, 7, 0, 8, 0, 9, 0),
- BANK("H", PIN(GPIOH_0, 0), PIN(GPIOH_9, 0), 1, 16, 1, 16, 9, 19, 10, 19, 11, 19),
- BANK("CARD", PIN(CARD_0, 0), PIN(CARD_6, 0), 2, 20, 2, 20, 0, 22, 1, 22, 2, 22),
- BANK("BOOT", PIN(BOOT_0, 0), PIN(BOOT_18, 0), 2, 0, 2, 0, 9, 0, 10, 0, 11, 0),
- BANK("DIF", PIN(DIF_0_P, 0), PIN(DIF_4_N, 0), 5, 8, 5, 8, 12, 12, 13, 12, 14, 12),
+ /* name first last irq pullen pull dir out in */
+ BANK("X", PIN(GPIOX_0, 0), PIN(GPIOX_21, 0), 97, 118, 4, 0, 4, 0, 0, 0, 1, 0, 2, 0),
+ BANK("Y", PIN(GPIOY_0, 0), PIN(GPIOY_14, 0), 80, 96, 3, 0, 3, 0, 3, 0, 4, 0, 5, 0),
+ BANK("DV", PIN(GPIODV_9, 0), PIN(GPIODV_29, 0), 59, 79, 0, 0, 0, 0, 7, 0, 8, 0, 9, 0),
+ BANK("H", PIN(GPIOH_0, 0), PIN(GPIOH_9, 0), 14, 23, 1, 16, 1, 16, 9, 19, 10, 19, 11, 19),
+ BANK("CARD", PIN(CARD_0, 0), PIN(CARD_6, 0), 43, 49, 2, 20, 2, 20, 0, 22, 1, 22, 2, 22),
+ BANK("BOOT", PIN(BOOT_0, 0), PIN(BOOT_18, 0), 24, 42, 2, 0, 2, 0, 9, 0, 10, 0, 11, 0),
+
+ /*
+ * The following bank is not mentionned in the public datasheet
+ * There is no information whether it can be used with the gpio
+ * interrupt controller
+ */
+ BANK("DIF", PIN(DIF_0_P, 0), PIN(DIF_4_N, 0), -1, -1, 5, 8, 5, 8, 12, 12, 13, 12, 14, 12),
};
static struct meson_bank meson8b_aobus_banks[] = {
- /* name first last pullen pull dir out in */
- BANK("AO", PIN(GPIOAO_0, AO_OFF), PIN(GPIO_TEST_N, AO_OFF), 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
+ /* name first last irq pullen pull dir out in */
+ BANK("AO", PIN(GPIOAO_0, AO_OFF), PIN(GPIO_TEST_N, AO_OFF), 0, 13, 0, 0, 0, 16, 0, 0, 0, 16, 1, 0),
};
struct meson_pinctrl_data meson8b_cbus_pinctrl_data = {
--
2.13.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-05-28 19:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-28 18:40 [PATCH RfC v4 0/6] pintrl: meson: add support for GPIO IRQs Heiner Kallweit
2017-05-28 19:11 ` [PATCH RfC v4 3/6] dt-bindings: add Amlogic Meson GPIO interrupt-controller DT binding documentation Heiner Kallweit
2017-05-29 8:44 ` Neil Armstrong
[not found] ` <49ab677f-3165-d6f5-75f5-a963879e8ecf-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-05-28 19:10 ` Heiner Kallweit [this message]
[not found] ` <ce04b62c-5f38-4d73-b9bc-4ba58ced779d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-05-29 8:43 ` [PATCH RfC v4 1/6] pinctrl: meson: add interrupts to pinctrl data Neil Armstrong
2017-05-28 19:11 ` [PATCH RfC v4 2/6] irqchip: add Amlogic Meson GPIO irqchip driver Heiner Kallweit
[not found] ` <b23d0417-a43b-a28c-3d9f-2be9bf6623f1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-05-29 7:57 ` Linus Walleij
2017-05-29 8:38 ` Neil Armstrong
2017-05-28 19:11 ` [PATCH RfC v4 4/6] ARM(64): dts: meson: add GPIO interrupt-controller support Heiner Kallweit
2017-05-29 8:49 ` Neil Armstrong
[not found] ` <860a50b5-3e7c-29d0-54fa-89bf2840e04e-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-05-29 20:01 ` Heiner Kallweit
[not found] ` <a7db5fa9-02b9-a26a-26ad-fdfcef0b9938-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2017-05-30 8:41 ` Neil Armstrong
2017-05-28 19:12 ` [PATCH RfC v4 5/6] pinctrl: meson: add support for GPIO interrupts Heiner Kallweit
2017-05-29 8:43 ` Neil Armstrong
[not found] ` <b897c978-df5c-3494-6e29-26cb0b376709-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-05-29 20:12 ` Heiner Kallweit
2017-05-30 7:46 ` Jerome Brunet
2017-05-30 18:51 ` Heiner Kallweit
2017-05-28 19:13 ` [PATCH RfC v4 6/6] ARM(64): dts: meson: mark gpio controllers as interrupt controllers and update binding documentation Heiner Kallweit
2017-05-29 8:50 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ce04b62c-5f38-4d73-b9bc-4ba58ced779d@gmail.com \
--to=hkallweit1-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jbrunet-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=marc.zyngier-5wv7dgnIgG8@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=narmstrong-rdvid1DuHRBWk0Htik3J/w@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).