From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Sebastian Reichel <sre@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Hans de Goede <hdegoede@redhat.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
LKML <linux-kernel@vger.kernel.org>,
platform-driver-x86@vger.kernel.org, linux-usb@vger.kernel.org,
linux-arm-msm@vger.kernel.org, Nikita Travkin <nikita@trvn.ru>
Subject: Re: [PATCH v4 3/6] usb: typec: ucsi: add Lenovo Yoga C630 glue driver
Date: Wed, 29 May 2024 18:20:15 +0300 (EEST) [thread overview]
Message-ID: <ce6cbe69-f1de-1224-2a6e-3c7b07203d84@linux.intel.com> (raw)
In-Reply-To: <20240528-yoga-ec-driver-v4-3-4fa8dfaae7b6@linaro.org>
On Tue, 28 May 2024, Dmitry Baryshkov wrote:
> The Lenovo Yoga C630 WOS laptop provides implements UCSI interface in
> the onboard EC. Add glue driver to interface the platform's UCSI
> implementation.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
> drivers/usb/typec/ucsi/Kconfig | 9 ++
> drivers/usb/typec/ucsi/Makefile | 1 +
> drivers/usb/typec/ucsi/ucsi_yoga_c630.c | 189 ++++++++++++++++++++++++++++++++
> 3 files changed, 199 insertions(+)
>
> diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
> index bdcb1764cfae..680e1b87b152 100644
> --- a/drivers/usb/typec/ucsi/Kconfig
> +++ b/drivers/usb/typec/ucsi/Kconfig
> @@ -69,4 +69,13 @@ config UCSI_PMIC_GLINK
> To compile the driver as a module, choose M here: the module will be
> called ucsi_glink.
>
> +config UCSI_LENOVO_YOGA_C630
> + tristate "UCSI Interface Driver for Lenovo Yoga C630"
> + depends on EC_LENOVO_YOGA_C630
> + help
> + This driver enables UCSI support on the Lenovo Yoga C630 laptop.
> +
> + To compile the driver as a module, choose M here: the module will be
> + called ucsi_yoga_c630.
> +
> endif
> diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
> index b4679f94696b..aed41d23887b 100644
> --- a/drivers/usb/typec/ucsi/Makefile
> +++ b/drivers/usb/typec/ucsi/Makefile
> @@ -21,3 +21,4 @@ obj-$(CONFIG_UCSI_ACPI) += ucsi_acpi.o
> obj-$(CONFIG_UCSI_CCG) += ucsi_ccg.o
> obj-$(CONFIG_UCSI_STM32G0) += ucsi_stm32g0.o
> obj-$(CONFIG_UCSI_PMIC_GLINK) += ucsi_glink.o
> +obj-$(CONFIG_UCSI_LENOVO_YOGA_C630) += ucsi_yoga_c630.o
> diff --git a/drivers/usb/typec/ucsi/ucsi_yoga_c630.c b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> new file mode 100644
> index 000000000000..ca1ab5c81b87
> --- /dev/null
> +++ b/drivers/usb/typec/ucsi/ucsi_yoga_c630.c
> @@ -0,0 +1,189 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2022-2024, Linaro Ltd
> + * Authors:
> + * Bjorn Andersson
> + * Dmitry Baryshkov
> + */
> +#include <linux/auxiliary_bus.h>
> +#include <linux/module.h>
> +#include <linux/platform_data/lenovo-yoga-c630.h>
> +
> +#include "ucsi.h"
> +
> +struct yoga_c630_ucsi {
> + struct yoga_c630_ec *ec;
> + struct ucsi *ucsi;
> + struct notifier_block nb;
> + struct completion complete;
Add includes for what you used here.
> + unsigned long flags;
> +#define UCSI_C630_COMMAND_PENDING 0
> +#define UCSI_C630_ACK_PENDING 1
> + u16 version;
> +};
> +
> +static int yoga_c630_ucsi_read(struct ucsi *ucsi, unsigned int offset,
extra space
> + void *val, size_t val_len)
> +{
> + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
Missing include for ucsi_get_drvdata
> + u8 buf[YOGA_C630_UCSI_READ_SIZE];
> + int ret;
> +
> + ret = yoga_c630_ec_ucsi_read(uec->ec, buf);
> + if (ret)
> + return ret;
> +
> + if (offset == UCSI_VERSION) {
> + memcpy(val, &uec->version, min(val_len, sizeof(uec->version)));
> + return 0;
> + }
> +
> + if (offset == UCSI_CCI)
> + memcpy(val, buf,
> + min(val_len, YOGA_C630_UCSI_CCI_SIZE));
Fits to one line.
> + else if (offset == UCSI_MESSAGE_IN)
> + memcpy(val, buf + YOGA_C630_UCSI_CCI_SIZE,
> + min(val_len, YOGA_C630_UCSI_DATA_SIZE));
> + else
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int yoga_c630_ucsi_async_write(struct ucsi *ucsi, unsigned int offset,
extra space, there seems to be more of them below but I won't mark them.
> + const void *val, size_t val_len)
> +{
> + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> +
> + if (offset != UCSI_CONTROL ||
> + val_len != YOGA_C630_UCSI_WRITE_SIZE)
> + return -EINVAL;
> +
> + return yoga_c630_ec_ucsi_write(uec->ec, val);
> +}
> +
> +static int yoga_c630_ucsi_sync_write(struct ucsi *ucsi, unsigned int offset,
> + const void *val, size_t val_len)
> +{
> + struct yoga_c630_ucsi *uec = ucsi_get_drvdata(ucsi);
> + bool ack = UCSI_COMMAND(*(u64 *)val) == UCSI_ACK_CC_CI;
> + int ret;
> +
> + if (ack)
> + set_bit(UCSI_C630_ACK_PENDING, &uec->flags);
> + else
> + set_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);
Include for set_bit()
> + reinit_completion(&uec->complete);
> +
> + ret = yoga_c630_ucsi_async_write(ucsi, offset, val, val_len);
> + if (ret)
> + goto out_clear_bit;
> +
> + if (!wait_for_completion_timeout(&uec->complete, 5 * HZ))
> + ret = -ETIMEDOUT;
> +
> +out_clear_bit:
> + if (ack)
> + clear_bit(UCSI_C630_ACK_PENDING, &uec->flags);
> + else
> + clear_bit(UCSI_C630_COMMAND_PENDING, &uec->flags);
> +
> + return ret;
> +}
> +
> +const struct ucsi_operations yoga_c630_ucsi_ops = {
Include for ucsi_operations.
> + .read = yoga_c630_ucsi_read,
> + .sync_write = yoga_c630_ucsi_sync_write,
> + .async_write = yoga_c630_ucsi_async_write,
> +};
> +
> +static int yoga_c630_ucsi_notify(struct notifier_block *nb,
> + unsigned long action, void *data)
> +{
> + struct yoga_c630_ucsi *uec = container_of(nb, struct yoga_c630_ucsi, nb);
Include for container_of
--
i.
next prev parent reply other threads:[~2024-05-29 15:20 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-28 20:44 [PATCH v4 0/6] power: supply: Lenovo Yoga C630 EC Dmitry Baryshkov
2024-05-28 20:44 ` [PATCH v4 1/6] dt-bindings: platform: Add " Dmitry Baryshkov
2024-05-28 20:44 ` [PATCH v4 2/6] platform: arm64: add Lenovo Yoga C630 WOS EC driver Dmitry Baryshkov
2024-05-28 23:51 ` Bryan O'Donoghue
2024-05-28 23:56 ` Dmitry Baryshkov
2024-05-29 8:08 ` Bryan O'Donoghue
2024-05-29 15:08 ` Ilpo Järvinen
2024-05-28 20:44 ` [PATCH v4 3/6] usb: typec: ucsi: add Lenovo Yoga C630 glue driver Dmitry Baryshkov
2024-05-29 15:20 ` Ilpo Järvinen [this message]
2024-05-29 15:22 ` Dmitry Baryshkov
2024-05-29 15:26 ` Ilpo Järvinen
2024-05-29 15:41 ` Bryan O'Donoghue
2024-05-31 0:22 ` Dmitry Baryshkov
2024-05-28 20:44 ` [PATCH v4 4/6] power: supply: lenovo_yoga_c630_battery: add Lenovo C630 driver Dmitry Baryshkov
2024-05-29 15:41 ` Ilpo Järvinen
2024-05-31 0:58 ` Dmitry Baryshkov
2024-05-29 15:51 ` Bryan O'Donoghue
2024-05-31 1:05 ` Dmitry Baryshkov
2024-06-05 23:52 ` Sebastian Reichel
2024-05-28 20:44 ` [PATCH v4 5/6] arm64: dts: qcom: sdm845: describe connections of USB/DP port Dmitry Baryshkov
2024-05-29 16:05 ` Bryan O'Donoghue
2024-05-28 20:44 ` [PATCH v4 6/6] arm64: dts: qcom: c630: Add Embedded Controller node Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ce6cbe69-f1de-1224-2a6e-3c7b07203d84@linux.intel.com \
--to=ilpo.jarvinen@linux.intel.com \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nikita@trvn.ru \
--cc=platform-driver-x86@vger.kernel.org \
--cc=robh@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).