public inbox for devicetree@vger.kernel.org
 help / color / mirror / Atom feed
From: Adrian Hunter <adrian.hunter@intel.com>
To: Vadym Kochan <vadym.kochan@plvision.eu>,
	Hu Ziji <huziji@marvell.com>,
	Ulf Hansson <ulf.hansson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Elad Nachman <enachman@marvell.com>,
	Chris Packham <chris.packham@alliedtelesis.co.nz>
Subject: Re: [PATCH v3 3/3] mmc: xenon: Fix 2G limitation on AC5 SoC
Date: Fri, 9 Dec 2022 13:53:58 +0200	[thread overview]
Message-ID: <ce870974-3e4f-107f-2047-89dcaebff1a2@intel.com> (raw)
In-Reply-To: <VI1P190MB0317641905664AFF51F9F4EA951C9@VI1P190MB0317.EURP190.PROD.OUTLOOK.COM>

On 9/12/22 13:39, Vadym Kochan wrote:
> Hi Adrian,
> 
> On Fri, 9 Dec 2022 09:23:05 +0200, Adrian Hunter <adrian.hunter@intel.com> wrote:
>> On 5/12/22 12:59, Vadym Kochan wrote:
>>> There is a limitation on AC5 SoC that mmc controller
>>> can't have DMA access over 2G memory, so use SDMA with
>>> a bounce buffer. Swiotlb can't help because on arm64 arch
>>> it reserves memblock's at the end of the memory.
>>>
>>> Additionally set mask to 34 bit since on AC5 SoC RAM starts
>>> at 0x2_00000000.
>>
>> Can you explain more about how a 34-bit DMA mask works when
>> SDMA only supports 32-bit addresses?
>>
> 
> So, after I set
> 
>>> +		host->flags &= ~SDHCI_USE_64_BIT_DMA;
> 
> then sdhc core sets mask to 32 bit, but then dma_map fails to map
> bounce buffer because the base address is higher than 32bit - 0x2_00000000,
> and 34bit mask fixed it.

What happens if the bounce buffer gets mapped in the range
0x1_00000000 to 0x1_ffffffff ?

> 
>>>
>>> Co-developed-by: Elad Nachman <enachman@marvell.com>
>>> Signed-off-by: Elad Nachman <enachman@marvell.com>
>>> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
>>> ---
>>>  drivers/mmc/host/sdhci-xenon.c | 38 ++++++++++++++++++++++++++++++++++
>>>  drivers/mmc/host/sdhci-xenon.h |  3 ++-
>>>  2 files changed, 40 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
>>> index 08e838400b52..5f3db0425674 100644
>>> --- a/drivers/mmc/host/sdhci-xenon.c
>>> +++ b/drivers/mmc/host/sdhci-xenon.c
>>> @@ -13,7 +13,9 @@
>>>  
>>>  #include <linux/acpi.h>
>>>  #include <linux/delay.h>
>>> +#include <linux/dma-mapping.h>
>>>  #include <linux/ktime.h>
>>> +#include <linux/mm.h>
>>>  #include <linux/module.h>
>>>  #include <linux/of.h>
>>>  #include <linux/pm.h>
>>> @@ -253,6 +255,22 @@ static unsigned int xenon_get_max_clock(struct sdhci_host *host)
>>>  		return pltfm_host->clock;
>>>  }
>>>  
>>> +static int xenon_set_dma_mask(struct sdhci_host *host)
>>> +{
>>> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
>>> +	struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
>>> +	struct mmc_host *mmc = host->mmc;
>>> +	struct device *dev = mmc_dev(mmc);
>>> +
>>> +	if (priv->hw_version == XENON_AC5) {
>>> +		host->flags &= ~SDHCI_USE_64_BIT_DMA;
>>> +
>>> +		return dma_set_mask_and_coherent(dev, DMA_BIT_MASK(34));
>>> +	}
>>> +
>>> +	return sdhci_set_dma_mask(host);
>>> +}
>>> +
>>>  static const struct sdhci_ops sdhci_xenon_ops = {
>>>  	.voltage_switch		= xenon_voltage_switch,
>>>  	.set_clock		= sdhci_set_clock,
>>> @@ -261,6 +279,7 @@ static const struct sdhci_ops sdhci_xenon_ops = {
>>>  	.reset			= xenon_reset,
>>>  	.set_uhs_signaling	= xenon_set_uhs_signaling,
>>>  	.get_max_clock		= xenon_get_max_clock,
>>> +	.set_dma_mask		= xenon_set_dma_mask,
>>>  };
>>>  
>>>  static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
>>> @@ -486,6 +505,18 @@ static void xenon_sdhc_unprepare(struct sdhci_host *host)
>>>  	xenon_disable_sdhc(host, sdhc_id);
>>>  }
>>>  
>>> +static int xenon_ac5_probe(struct sdhci_host *host)
>>> +{
>>> +	struct sysinfo si;
>>> +
>>> +	si_meminfo(&si);
>>> +
>>> +	if ((si.totalram * si.mem_unit) > SZ_2G)
>>> +		host->quirks |= SDHCI_QUIRK_BROKEN_ADMA;
>>> +
>>> +	return 0;
>>> +}
>>> +
>>>  static int xenon_probe(struct platform_device *pdev)
>>>  {
>>>  	struct sdhci_pltfm_host *pltfm_host;
>>> @@ -533,6 +564,12 @@ static int xenon_probe(struct platform_device *pdev)
>>>  		}
>>>  	}
>>>  
>>> +	if (priv->hw_version == XENON_AC5) {
>>> +		err = xenon_ac5_probe(host);
>>> +		if (err)
>>> +			goto err_clk_axi;
>>> +	}
>>> +
>>>  	err = mmc_of_parse(host->mmc);
>>>  	if (err)
>>>  		goto err_clk_axi;
>>> @@ -682,6 +719,7 @@ static const struct of_device_id sdhci_xenon_dt_ids[] = {
>>>  	{ .compatible = "marvell,armada-ap807-sdhci", .data = (void *)XENON_AP807},
>>>  	{ .compatible = "marvell,armada-cp110-sdhci", .data =  (void *)XENON_CP110},
>>>  	{ .compatible = "marvell,armada-3700-sdhci", .data =  (void *)XENON_A3700},
>>> +	{ .compatible = "marvell,ac5-sdhci", .data = (void *)XENON_AC5},
>>>  	{}
>>>  };
>>>  MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
>>> diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
>>> index 3e9c6c908a79..0460d97aad26 100644
>>> --- a/drivers/mmc/host/sdhci-xenon.h
>>> +++ b/drivers/mmc/host/sdhci-xenon.h
>>> @@ -57,7 +57,8 @@ enum xenon_variant {
>>>  	XENON_A3700,
>>>  	XENON_AP806,
>>>  	XENON_AP807,
>>> -	XENON_CP110
>>> +	XENON_CP110,
>>> +	XENON_AC5
>>>  };
>>>  
>>>  struct xenon_priv {
>>
> 
> Regards,


  reply	other threads:[~2022-12-09 11:54 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-05 10:59 [PATCH v3 0/3] mmc: xenon: Fix 2G DMA limitation on AC5 SoC Vadym Kochan
2022-12-05 10:59 ` [PATCH v3 1/3] dt-bindings: mmc: xenon: Add compatible string for " Vadym Kochan
2022-12-05 13:28   ` Krzysztof Kozlowski
2022-12-05 10:59 ` [PATCH v3 2/3] mmc: sdhci: Export sdhci_set_dma_mask to be used by the drivers Vadym Kochan
2022-12-05 10:59 ` [PATCH v3 3/3] mmc: xenon: Fix 2G limitation on AC5 SoC Vadym Kochan
2022-12-07 13:40   ` Linus Walleij
2022-12-08 10:19     ` [EXT] " Elad Nachman
2022-12-08 21:35       ` Linus Walleij
2022-12-09  7:23   ` Adrian Hunter
2022-12-09 11:39     ` Vadym Kochan
2022-12-09 11:53       ` Adrian Hunter [this message]
2022-12-09 12:10         ` Vadym Kochan
2022-12-09 12:13           ` Adrian Hunter
2022-12-09 13:27             ` Vadym Kochan
2022-12-12  8:42               ` Adrian Hunter
2022-12-12 11:34                 ` Vadym Kochan
2022-12-12 13:13                   ` Adrian Hunter
2022-12-13  9:22                   ` Linus Walleij
2022-12-13  9:16                 ` Linus Walleij
2022-12-13  9:21                   ` Vadym Kochan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ce870974-3e4f-107f-2047-89dcaebff1a2@intel.com \
    --to=adrian.hunter@intel.com \
    --cc=chris.packham@alliedtelesis.co.nz \
    --cc=devicetree@vger.kernel.org \
    --cc=enachman@marvell.com \
    --cc=huziji@marvell.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    --cc=vadym.kochan@plvision.eu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox