From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Devi Priya <quic_devipriy@quicinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: agross@kernel.org, andersson@kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, mturquette@baylibre.com,
sboyd@kernel.org, linus.walleij@linaro.org,
catalin.marinas@arm.com, will@kernel.org, p.zabel@pengutronix.de,
shawnguo@kernel.org, arnd@arndb.de, marcel.ziswiler@toradex.com,
nfraprado@collabora.com, broonie@kernel.org,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
quic_srichara@quicinc.com, quic_gokulsri@quicinc.com,
quic_sjaganat@quicinc.com, quic_kathirav@quicinc.com,
quic_arajkuma@quicinc.com, quic_anusha@quicinc.com,
quic_poovendh@quicinc.com
Subject: Re: [PATCH V10 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant
Date: Tue, 28 Mar 2023 10:42:50 +0200 [thread overview]
Message-ID: <cf530ceb-ca4c-5f5e-db61-60f856dafecb@linaro.org> (raw)
In-Reply-To: <a6225636-7abb-3c5c-c78f-8d40c25167b9@quicinc.com>
On 28.03.2023 09:31, Devi Priya wrote:
>
>
> On 3/27/2023 8:15 PM, Dmitry Baryshkov wrote:
>> On Mon, 27 Mar 2023 at 16:28, Devi Priya <quic_devipriy@quicinc.com> wrote:
>>>
>>> Add initial device tree support for Qualcomm IPQ9574 SoC and
>>> Reference Design Platform(RDP) 433 which is based on IPQ9574
>>> family of SoCs
>>>
>>> Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
>>> Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
>>> Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>> Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
>>> Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
>>> ---
>>> Changes in V10:
>>> - Renamed the Board Device Tree Source to use the RDP numbers
>>> - Updated the Makefile, subject and commit message accordingly
>>>
>>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>>> arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 84 ++++++
>>> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 270 ++++++++++++++++++++
>>> 3 files changed, 355 insertions(+)
>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>> create mode 100644 arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>>> index 1a29403400b7..52f1f92c5195 100644
>>> --- a/arch/arm64/boot/dts/qcom/Makefile
>>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>>> @@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
>>> +dtb-$(CONFIG_ARCH_QCOM) += ipq9574-rdp433.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
>>> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>> new file mode 100644
>>> index 000000000000..2ce8e09e7565
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
>>> @@ -0,0 +1,84 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +/*
>>> + * IPQ9574 RDP433 board device tree source
>>> + *
>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +#include "ipq9574.dtsi"
>>> +
>>> +/ {
>>> + model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7";
>>> + compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574";
>>> +
>>> + aliases {
>>> + serial0 = &blsp1_uart2;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = "serial0:115200n8";
>>> + };
>>> +};
>>> +
>>> +&blsp1_uart2 {
>>> + pinctrl-0 = <&uart2_pins>;
>>> + pinctrl-names = "default";
>>> + status = "okay";
>>> +};
>>> +
>>> +&sdhc_1 {
>>> + pinctrl-0 = <&sdc_default_state>;
>>> + pinctrl-names = "default";
>>> + mmc-ddr-1_8v;
>>> + mmc-hs200-1_8v;
>>> + mmc-hs400-1_8v;
>>> + mmc-hs400-enhanced-strobe;
>>> + max-frequency = <384000000>;
>>> + bus-width = <8>;
>>> + status = "okay";
>>> +};
>>> +
>>> +&sleep_clk {
>>> + clock-frequency = <32000>;
>>> +};
>>> +
>>> +&tlmm {
>>> + sdc_default_state: sdc-default-state {
>>> + clk-pins {
>>> + pins = "gpio5";
>>> + function = "sdc_clk";
>>> + drive-strength = <8>;
>>> + bias-disable;
>>> + };
>>> +
>>> + cmd-pins {
>>> + pins = "gpio4";
>>> + function = "sdc_cmd";
>>> + drive-strength = <8>;
>>> + bias-pull-up;
>>> + };
>>> +
>>> + data-pins {
>>> + pins = "gpio0", "gpio1", "gpio2",
>>> + "gpio3", "gpio6", "gpio7",
>>> + "gpio8", "gpio9";
>>> + function = "sdc_data";
>>> + drive-strength = <8>;
>>> + bias-pull-up;
>>> + };
>>> +
>>> + rclk-pins {
>>> + pins = "gpio10";
>>> + function = "sdc_rclk";
>>> + drive-strength = <8>;
>>> + bias-pull-down;
>>> + };
>>> + };
>>> +};
>>> +
>>> +&xo_board_clk {
>>> + clock-frequency = <24000000>;
>>> +};
>>> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>> new file mode 100644
>>> index 000000000000..3bb7435f5e7f
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
>>> @@ -0,0 +1,270 @@
>>> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
>>> +/*
>>> + * IPQ9574 SoC device tree source
>>> + *
>>> + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
>>> + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved.
>>> + */
>>> +
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/clock/qcom,ipq9574-gcc.h>
>>> +#include <dt-bindings/reset/qcom,ipq9574-gcc.h>
>>> +
>>> +/ {
>>> + interrupt-parent = <&intc>;
>>> + #address-cells = <2>;
>>> + #size-cells = <2>;
>>> +
>>> + clocks {
>>> + bias_pll_ubi_nc_clk: bias-pll-ubi-nc-clk {
>>> + compatible = "fixed-clock";
>>> + clock-frequency = <353000000>;
>>> + #clock-cells = <0>;
>>> + };
>>
>> What is the source for this clock? With it clocking at 353 MHz, I
>> doubt that it is an external clock.
> bias_pll_ubi_nc_clk (353MHz)is a backup source
> for Q6_AXIM2_CLK
Is this not handled internally by MPSS firmware or RPM
then?
Konrad
/PCIE2_AXIM_CLK/PCIE3_AXIM_CLK/SNOC-CLK
> It is from the CMN_PLL, and is the same as that of PPE core clock.
> Do you suggest to move its clock-frequency to Board DT similar to xo/sleep clock?
>>
>>> +
>>> + sleep_clk: sleep-clk {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + };
>>> +
>>> + xo_board_clk: xo-board-clk {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + };
>>> + };
>>
>> [skipped the rest]
>>
> Regards,
> Devi Priya
next prev parent reply other threads:[~2023-03-28 8:42 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-27 13:27 [PATCH V10 0/4] Add minimal boot support for IPQ9574 Devi Priya
2023-03-27 13:27 ` [PATCH V10 1/4] dt-bindings: clock: Add ipq9574 clock and reset definitions Devi Priya
2023-03-27 13:27 ` [PATCH V10 2/4] clk: qcom: Add Global Clock Controller driver for IPQ9574 Devi Priya
2023-03-27 16:48 ` Stephen Boyd
2023-03-28 6:15 ` Devi Priya
2023-03-28 16:59 ` Stephen Boyd
2023-03-30 9:17 ` Devi Priya
2023-03-27 13:27 ` [PATCH V10 3/4] arm64: dts: qcom: Add support for ipq9574 SoC and RDP433 variant Devi Priya
2023-03-27 14:45 ` Dmitry Baryshkov
2023-03-28 7:31 ` Devi Priya
2023-03-28 8:42 ` Konrad Dybcio [this message]
2023-03-28 10:39 ` Dmitry Baryshkov
2023-03-31 12:22 ` Devi Priya
2023-03-27 13:27 ` [PATCH V10 4/4] arm64: defconfig: Enable IPQ9574 SoC base configs Devi Priya
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cf530ceb-ca4c-5f5e-db61-60f856dafecb@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=arnd@arndb.de \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel.ziswiler@toradex.com \
--cc=mturquette@baylibre.com \
--cc=nfraprado@collabora.com \
--cc=p.zabel@pengutronix.de \
--cc=quic_anusha@quicinc.com \
--cc=quic_arajkuma@quicinc.com \
--cc=quic_devipriy@quicinc.com \
--cc=quic_gokulsri@quicinc.com \
--cc=quic_kathirav@quicinc.com \
--cc=quic_poovendh@quicinc.com \
--cc=quic_sjaganat@quicinc.com \
--cc=quic_srichara@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).