From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <devicetree-owner@vger.kernel.org>
X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
	aws-us-west-2-korg-lkml-1.web.codeaurora.org
Received: from vger.kernel.org (vger.kernel.org [23.128.96.18])
	by smtp.lore.kernel.org (Postfix) with ESMTP id A6443C7EE2A
	for <linux-devicetree@archiver.kernel.org>; Mon, 22 May 2023 09:08:25 +0000 (UTC)
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S231996AbjEVJIY (ORCPT
        <rfc822;linux-devicetree@archiver.kernel.org>);
        Mon, 22 May 2023 05:08:24 -0400
Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49190 "EHLO
        lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S229719AbjEVJIU (ORCPT
        <rfc822;devicetree@vger.kernel.org>); Mon, 22 May 2023 05:08:20 -0400
Received: from mail-wm1-x32e.google.com (mail-wm1-x32e.google.com [IPv6:2a00:1450:4864:20::32e])
        by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 32F10CF
        for <devicetree@vger.kernel.org>; Mon, 22 May 2023 02:08:17 -0700 (PDT)
Received: by mail-wm1-x32e.google.com with SMTP id 5b1f17b1804b1-3f6042d605dso6281935e9.2
        for <devicetree@vger.kernel.org>; Mon, 22 May 2023 02:08:17 -0700 (PDT)
DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
        d=linaro.org; s=google; t=1684746495; x=1687338495;
        h=content-transfer-encoding:in-reply-to:organization:references:cc:to
         :content-language:subject:reply-to:from:user-agent:mime-version:date
         :message-id:from:to:cc:subject:date:message-id:reply-to;
        bh=TSpW1gVvB5cVVAEKCaUdnaLMHTrtmQtwE67H0ZgF21Q=;
        b=bmni6pR0isIv835bnSoKlZeu9/SXJ4xPWnKUiiaWIX1omr3WRm2IM6pqapWedKUx0I
         x5/Dd8wXL2IjPAoJ/FsYvyGr8YsUHLkDrL+R6Ctz5KKvPXlwzFwNzYbglk1vgpVFhCXQ
         jFSNNf9w48FRnCt5c+/aKehDs50JDPdWL7713d9WvbltRi5Rswi4L1a64fw4oSZu3Uyy
         +c+FffAPCT3wp3owwzwtsgpdRk1ZOctkp5tNWNxpjynbNB0diHA7qYIkGzlCDrPg9xSk
         dyuSA0GVTZBCkWI51UqKoldjEgvf7jd4+8xNSzhTuAaKNW9JeM48gk9FgUBMQ/CWTZK9
         qdsQ==
X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed;
        d=1e100.net; s=20221208; t=1684746495; x=1687338495;
        h=content-transfer-encoding:in-reply-to:organization:references:cc:to
         :content-language:subject:reply-to:from:user-agent:mime-version:date
         :message-id:x-gm-message-state:from:to:cc:subject:date:message-id
         :reply-to;
        bh=TSpW1gVvB5cVVAEKCaUdnaLMHTrtmQtwE67H0ZgF21Q=;
        b=B+RZrIrKmF3D2sZspoLBH5tPT6XVpd66B2b8C/D4rFiZylfV3L/hN0hobdNlJ9Gbuo
         ttR9glx/jq2dy0lv7ODr4SLI8cx9MFaSxpyjCiyeZQ1dO+A1p8sw0lCQSfUnLJ9fEAxH
         Y5ReGfMhYsvNzr3krNYH5SJlGIYw9qzGz4Gl9xsZimuPilBM8IQxOE9sz5b3now4JFUY
         oxZ19tn7y05T9axSxvmXUC5pzLxmM+qQczOwO3Amo3Kj3Z3fW4+pKZJymV8sGuBVsyN5
         28LmcWGPrj9VgSLOrquB6cgtxEhst/u0tzAWa4zOiHvyiprQ0w7o4D7vN+GhFZ8/hnrs
         XwGg==
X-Gm-Message-State: AC+VfDzqJyq6zLn/li0t6qgmIQOHzYfvLnHqZRwvA/WMWg+wkbYkAjo5
        XeAGZqoguTko4BUJaekBGQ1j8g==
X-Google-Smtp-Source: ACHHUZ77+hx3HZCAMlBC62W1q3tZFDkgDbt14mnCG4IgpTDXfN9x+HtvbcjhhiOsUYib+DeuRr6Lrg==
X-Received: by 2002:a7b:c412:0:b0:3f4:2267:10cf with SMTP id k18-20020a7bc412000000b003f4226710cfmr6853986wmi.32.1684746495508;
        Mon, 22 May 2023 02:08:15 -0700 (PDT)
Received: from [192.168.27.65] (home.beaume.starnux.net. [82.66.176.246])
        by smtp.gmail.com with ESMTPSA id c17-20020a7bc011000000b003f31cb7a203sm7640305wmb.14.2023.05.22.02.08.13
        (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128);
        Mon, 22 May 2023 02:08:14 -0700 (PDT)
Message-ID: <cf5dea0f-5999-6ac4-4f04-9b397ca94fdb@linaro.org>
Date:   Mon, 22 May 2023 11:08:12 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.10.1
From:   Neil Armstrong <neil.armstrong@linaro.org>
Reply-To: neil.armstrong@linaro.org
Subject: Re: [PATCH RFC 08/10] drm/panel/samsung-sofef03: Add panel driver for
 Sony Xperia 5 II
Content-Language: en-US
To:     Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
        Marijn Suijten <marijn.suijten@somainline.org>,
        Sam Ravnborg <sam@ravnborg.org>,
        David Airlie <airlied@gmail.com>,
        Daniel Vetter <daniel@ffwll.ch>,
        Caleb Connolly <caleb@connolly.tech>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Conor Dooley <conor+dt@kernel.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>
Cc:     ~postmarketos/upstreaming@lists.sr.ht,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@somainline.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Martin Botka <martin.botka@somainline.org>,
        Jami Kettunen <jami.kettunen@somainline.org>,
        dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org,
        Abhinav Kumar <quic_abhinavk@quicinc.com>,
        Kuogee Hsieh <quic_khsieh@quicinc.com>,
        Jessica Zhang <quic_jesszhan@quicinc.com>,
        Konrad Dybcio <konrad.dybcio@somainline.org>
References: <20230521-drm-panels-sony-v1-0-541c341d6bee@somainline.org>
 <20230521-drm-panels-sony-v1-8-541c341d6bee@somainline.org>
 <4679c741-7877-ce79-4086-08ec4ee9e6bf@linaro.org>
Organization: Linaro Developer Services
In-Reply-To: <4679c741-7877-ce79-4086-08ec4ee9e6bf@linaro.org>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 8bit
Precedence: bulk
List-ID: <devicetree.vger.kernel.org>
X-Mailing-List: devicetree@vger.kernel.org

On 22/05/2023 03:23, Dmitry Baryshkov wrote:
> On 22/05/2023 00:23, Marijn Suijten wrote:
>> The SOFEF03-M Display-IC paired with an unknown panel in the Sony Xperia
>> 5 II always uses Display Stream Compression 1.1 and features a 60hz and
>> 120hz refresh-rate mode.
>>
>> Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
> 
> Konrad's S-o-b is also required then
> 
>> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
>> ---
>>   drivers/gpu/drm/panel/Kconfig                 |  14 +
>>   drivers/gpu/drm/panel/Makefile                |   1 +
>>   drivers/gpu/drm/panel/panel-samsung-sofef03.c | 423 ++++++++++++++++++++++++++
>>   3 files changed, 438 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
>> index 3f11e9906f2cb..8e2668153bce2 100644
>> --- a/drivers/gpu/drm/panel/Kconfig
>> +++ b/drivers/gpu/drm/panel/Kconfig
>> @@ -630,6 +630,20 @@ config DRM_PANEL_SAMSUNG_SOFEF01
>>         This panel features a fixed mode of 1080x2520@60.
>> +config DRM_PANEL_SAMSUNG_SOFEF03
>> +    tristate "Samsung sofef03 Sony Xperia 5 II DSI cmd mode panel"
>> +    depends on GPIOLIB
>> +    depends on OF
>> +    depends on DRM_MIPI_DSI
>> +    depends on BACKLIGHT_CLASS_DEVICE
>> +    help
>> +      Say Y or M here if you want to enable support for the Samsung AMOLED
>> +      command mode panel found in the Sony Xperia 5 II smartphone.
>> +
>> +      This panel uses Display Stream Compression 1.1.
>> +
>> +      The panel features a 1080x2520@60 and 1080x2520@120 mode.
>> +
>>   config DRM_PANEL_SEIKO_43WVF1G
>>       tristate "Seiko 43WVF1G panel"
>>       depends on OF
>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
>> index a4039d0fc9cfb..52dcd82e33120 100644
>> --- a/drivers/gpu/drm/panel/Makefile
>> +++ b/drivers/gpu/drm/panel/Makefile
>> @@ -63,6 +63,7 @@ obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01) += panel-samsung-s6e88a0-ams4
>>   obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
>>   obj-$(CONFIG_DRM_PANEL_SAMSUNG_SOFEF00) += panel-samsung-sofef00.o
>>   obj-$(CONFIG_DRM_PANEL_SAMSUNG_SOFEF01) += panel-samsung-sofef01.o
>> +obj-$(CONFIG_DRM_PANEL_SAMSUNG_SOFEF03) += panel-samsung-sofef03.o
>>   obj-$(CONFIG_DRM_PANEL_SEIKO_43WVF1G) += panel-seiko-43wvf1g.o
>>   obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
>>   obj-$(CONFIG_DRM_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
>> diff --git a/drivers/gpu/drm/panel/panel-samsung-sofef03.c b/drivers/gpu/drm/panel/panel-samsung-sofef03.c
>> new file mode 100644
>> index 0000000000000..2763e1c56b37b
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-samsung-sofef03.c
>> @@ -0,0 +1,423 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2022 Konrad Dybcio <konrad.dybcio@linaro.org>
>> + * Copyright (c) 2023 Marijn Suijten <marijn.suijten@somainline.org>
>> + */
>> +
>> +#include <linux/backlight.h>
>> +#include <linux/delay.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/regulator/consumer.h>
>> +
>> +#include <video/mipi_display.h>
>> +
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_modes.h>
>> +#include <drm/drm_panel.h>
>> +#include <drm/drm_probe_helper.h>
>> +#include <drm/display/drm_dsc.h>
>> +#include <drm/display/drm_dsc_helper.h>
>> +
>> +static const bool enable_120hz = true;

Maybe this can be a module parameter ? Can you explain why this can't be dynamically changed by a modeset ?

>> +
>> +struct samsung_sofef03_m {
>> +    struct drm_panel panel;
>> +    struct mipi_dsi_device *dsi;
>> +    struct regulator *vddio, *vci;
>> +    struct gpio_desc *reset_gpio;
>> +    bool prepared;
>> +};
>> +
>> +static inline struct samsung_sofef03_m *to_samsung_sofef03_m(struct drm_panel *panel)
>> +{
>> +    return container_of(panel, struct samsung_sofef03_m, panel);
>> +}
>> +
>> +static void samsung_sofef03_m_reset(struct samsung_sofef03_m *ctx)
>> +{
>> +    gpiod_set_value_cansleep(ctx->reset_gpio, 0);
>> +    usleep_range(10000, 11000);
>> +}
>> +
>> +static int samsung_sofef03_m_on(struct samsung_sofef03_m *ctx)
>> +{
>> +    struct mipi_dsi_device *dsi = ctx->dsi;
>> +    struct device *dev = &dsi->dev;
>> +    int ret;
>> +
>> +    dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>> +
>> +    mipi_dsi_dcs_write_seq(dsi, 0x9d, 0x01);
>> +
>> +    ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
>> +        return ret;
>> +    }
>> +    usleep_range(10000, 11000);
>> +
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x09);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xd5, 0x00, 0x00, 0x00);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x08);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xee, 0x00, 0x00);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
>> +
>> +    ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to set tear on: %d\n", ret);
>> +        return ret;
>> +    }
>> +
>> +    ret = mipi_dsi_dcs_set_column_address(dsi, 0, 1080 - 1);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to set column address: %d\n", ret);
>> +        return ret;
>> +    }
>> +
>> +    ret = mipi_dsi_dcs_set_page_address(dsi, 0, 2520 - 1);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to set page address: %d\n", ret);
>> +        return ret;
>> +    }
>> +
>> +    ret = mipi_dsi_dcs_set_display_brightness_large(dsi, 100);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to set display brightness: %d\n", ret);
>> +        return ret;
>> +    }
>> +
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xdf, 0x83);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x01);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xe6, 0x01);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x02);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xec, 0x02, 0x00, 0x1c, 0x1c);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x0c);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xec, 0x01, 0x19);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
>> +    mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, BIT(5));
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf0, 0x5a, 0x5a);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xc2, 0x2d, 0x27);
>> +    mipi_dsi_dcs_write_seq(dsi, 0x60, enable_120hz ? 0x10 : 0x00);
>> +    mipi_dsi_dcs_write_seq(dsi, 0xf0, 0xa5, 0xa5);
>> +    msleep(110);
>> +
>> +    ret = mipi_dsi_dcs_set_display_on(dsi);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to turn display on: %d\n", ret);
>> +        return ret;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static int samsung_sofef03_m_off(struct samsung_sofef03_m *ctx)
>> +{
>> +    struct mipi_dsi_device *dsi = ctx->dsi;
>> +    struct device *dev = &dsi->dev;
>> +    int ret;
>> +
>> +    dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
>> +
>> +    ret = mipi_dsi_dcs_set_display_off(dsi);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to turn display off: %d\n", ret);
>> +        return ret;
>> +    }
>> +    msleep(20);
>> +
>> +    ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
>> +        return ret;
>> +    }
>> +    msleep(100);
>> +
>> +    return 0;
>> +}
>> +
>> +static int samsung_sofef03_m_prepare(struct drm_panel *panel)
>> +{
>> +    struct samsung_sofef03_m *ctx = to_samsung_sofef03_m(panel);
>> +    struct drm_dsc_picture_parameter_set pps;
>> +    struct device *dev = &ctx->dsi->dev;
>> +    int ret;
>> +
>> +    if (ctx->prepared)
>> +        return 0;
>> +
>> +    ret = regulator_enable(ctx->vddio);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to enable vddio regulator: %d\n", ret);
>> +        return ret;
>> +    }
>> +
>> +    ret = regulator_enable(ctx->vci);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to enable vci regulator: %d\n", ret);
>> +        regulator_disable(ctx->vddio);
>> +        return ret;
>> +    }
>> +
>> +    samsung_sofef03_m_reset(ctx);
>> +
>> +    ret = samsung_sofef03_m_on(ctx);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to initialize panel: %d\n", ret);
>> +        goto fail;
>> +    }
>> +
>> +    if (ctx->dsi->dsc) {
> 
> Always true
> 
>> +        drm_dsc_pps_payload_pack(&pps, ctx->dsi->dsc);
>> +
>> +        ret = mipi_dsi_picture_parameter_set(ctx->dsi, &pps);
>> +        if (ret < 0) {
>> +            dev_err(dev, "failed to transmit PPS: %d\n", ret);
>> +            goto fail;
>> +        }
>> +
>> +        ret = mipi_dsi_compression_mode(ctx->dsi, true);
>> +        if (ret < 0) {
>> +            dev_err(dev, "Failed to enable compression mode: %d\n", ret);
>> +            goto fail;
>> +        }
>> +
>> +        msleep(28);
>> +    }
>> +
>> +    ctx->prepared = true;
>> +    return 0;
>> +
>> +fail:
>> +    gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>> +    regulator_disable(ctx->vci);
>> +    regulator_disable(ctx->vddio);
>> +    return ret;
>> +}
>> +
>> +static int samsung_sofef03_m_unprepare(struct drm_panel *panel)
>> +{
>> +    struct samsung_sofef03_m *ctx = to_samsung_sofef03_m(panel);
>> +    struct device *dev = &ctx->dsi->dev;
>> +    int ret;
>> +
>> +    if (!ctx->prepared)
>> +        return 0;
>> +
>> +    ret = samsung_sofef03_m_off(ctx);
>> +    if (ret < 0)
>> +        dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
>> +
>> +    gpiod_set_value_cansleep(ctx->reset_gpio, 1);
>> +    regulator_disable(ctx->vci);
>> +    regulator_disable(ctx->vddio);
>> +
>> +    ctx->prepared = false;
>> +    return 0;
>> +}
>> +
>> +static const struct drm_display_mode samsung_sofef03_m_60hz_mode = {
>> +    .clock = (1080 + 156 + 8 + 8) * (2520 + 2393 + 8 + 8) * 60 / 1000,
>> +    .hdisplay = 1080,
>> +    .hsync_start = 1080 + 156,
>> +    .hsync_end = 1080 + 156 + 8,
>> +    .htotal = 1080 + 156 + 8 + 8,
>> +    .vdisplay = 2520,
>> +    .vsync_start = 2520 + 2393,
>> +    .vsync_end = 2520 + 2393 + 8,
>> +    .vtotal = 2520 + 2393 + 8 + 8,
>> +    .width_mm = 61,
>> +    .height_mm = 142,
>> +};
>> +
>> +static const struct drm_display_mode samsung_sofef03_m_120hz_mode = {
>> +    .clock = (1080 + 56 + 8 + 8) * (2520 + 499 + 8 + 8) * 120 / 1000,
>> +    .hdisplay = 1080,
>> +    .hsync_start = 1080 + 56,
>> +    .hsync_end = 1080 + 56 + 8,
>> +    .htotal = 1080 + 56 + 8 + 8,
>> +    .vdisplay = 2520,
>> +    .vsync_start = 2520 + 499,
>> +    .vsync_end = 2520 + 499 + 8,
>> +    .vtotal = 2520 + 499 + 8 + 8,
>> +    .width_mm = 61,
>> +    .height_mm = 142,
>> +};
>> +
>> +static int samsung_sofef03_m_get_modes(struct drm_panel *panel,
>> +                   struct drm_connector *connector)
>> +{
>> +    if (enable_120hz)
> 
> Is it possible to switch between these modes at runtime? It might be logical to define 60 Hz mode as preferred, while allowing users to switch to 120 Hz when required for some reason.
> 
>> +        return drm_connector_helper_get_modes_fixed(connector,
>> +                                &samsung_sofef03_m_120hz_mode);
>> +    else
>> +        return drm_connector_helper_get_modes_fixed(connector,
>> +                                &samsung_sofef03_m_60hz_mode);
>> +}
>> +
>> +static const struct drm_panel_funcs samsung_sofef03_m_panel_funcs = {
>> +    .prepare = samsung_sofef03_m_prepare,
>> +    .unprepare = samsung_sofef03_m_unprepare,
>> +    .get_modes = samsung_sofef03_m_get_modes,
>> +};
>> +
>> +static int samsung_sofef03_m_bl_update_status(struct backlight_device *bl)
>> +{
>> +    struct mipi_dsi_device *dsi = bl_get_data(bl);
>> +    u16 brightness = backlight_get_brightness(bl);
>> +    int ret;
>> +
>> +    dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
>> +
>> +    pr_err("Writing %#x\n", brightness);

You forgot to remove those desbug prints :-p

>> +
>> +    ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness);
>> +    if (ret < 0)
>> +        return ret;
>> +
>> +    dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>> +
>> +    return 0;
>> +}
>> +
>> +static int samsung_sofef03_m_bl_get_brightness(struct backlight_device *bl)
>> +{
>> +    struct mipi_dsi_device *dsi = bl_get_data(bl);
>> +    u16 brightness;
>> +    int ret;
>> +
>> +    dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
>> +
>> +    ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness);
>> +    if (ret < 0)
>> +        return ret;
>> +
>> +    dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>> +
>> +    pr_err("Read display brightness %#x\n", brightness);

Ditto

>> +
>> +    return brightness;
>> +}
>> +
>> +static const struct backlight_ops samsung_sofef03_m_bl_ops = {
>> +    .update_status = samsung_sofef03_m_bl_update_status,
>> +    .get_brightness = samsung_sofef03_m_bl_get_brightness,
>> +};
>> +
>> +static struct backlight_device *
>> +samsung_sofef03_m_create_backlight(struct mipi_dsi_device *dsi)
>> +{
>> +    struct device *dev = &dsi->dev;
>> +    const struct backlight_properties props = {
>> +        .type = BACKLIGHT_RAW,
>> +        .brightness = 100,
>> +        .max_brightness = 1023,
>> +    };
>> +
>> +    return devm_backlight_device_register(dev, dev_name(dev), dev, dsi,
>> +                          &samsung_sofef03_m_bl_ops, &props);
>> +}
>> +
>> +static int samsung_sofef03_m_probe(struct mipi_dsi_device *dsi)
>> +{
>> +    struct device *dev = &dsi->dev;
>> +    struct drm_dsc_config *dsc;
>> +    struct samsung_sofef03_m *ctx;
>> +    int ret;
>> +
>> +    ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>> +    if (!ctx)
>> +        return -ENOMEM;
>> +
>> +    ctx->vddio = devm_regulator_get(dev, "vddio");
>> +    if (IS_ERR(ctx->vddio))
>> +        return dev_err_probe(dev, PTR_ERR(ctx->vddio),
>> +                     "Failed to get vddio regulator\n");
>> +
>> +    ctx->vci = devm_regulator_get(dev, "vci");
>> +    if (IS_ERR(ctx->vci))
>> +        return dev_err_probe(dev, PTR_ERR(ctx->vci),
>> +                     "Failed to get vci regulator\n");
>> +
>> +    ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
>> +    if (IS_ERR(ctx->reset_gpio))
>> +        return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
>> +                     "Failed to get reset-gpios\n");
>> +
>> +    ctx->dsi = dsi;
>> +    mipi_dsi_set_drvdata(dsi, ctx);
>> +
>> +    dsi->lanes = 4;
>> +    dsi->format = MIPI_DSI_FMT_RGB888;
>> +    dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
>> +
>> +    drm_panel_init(&ctx->panel, dev, &samsung_sofef03_m_panel_funcs,
>> +               DRM_MODE_CONNECTOR_DSI);
>> +
>> +    ctx->panel.backlight = samsung_sofef03_m_create_backlight(dsi);
>> +    if (IS_ERR(ctx->panel.backlight))
>> +        return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight),
>> +                     "Failed to create backlight\n");
>> +
>> +    drm_panel_add(&ctx->panel);
>> +
>> +    /* This panel only supports DSC; unconditionally enable it */
>> +    dsi->dsc = dsc = devm_kzalloc(&dsi->dev, sizeof(*dsc), GFP_KERNEL);
> 
> Double assignment
> 
>> +    if (!dsc)
>> +        return -ENOMEM;
>> +
>> +    dsc->dsc_version_major = 1;
>> +    dsc->dsc_version_minor = 1;
>> +
>> +    dsc->slice_height = 30;
>> +    dsc->slice_width = 540;
>> +    dsc->slice_count = 2;
>> +    dsc->bits_per_component = 8;
>> +    dsc->bits_per_pixel = 8 << 4; /* 4 fractional bits */
>> +    dsc->block_pred_enable = true;
>> +
>> +    ret = mipi_dsi_attach(dsi);
>> +    if (ret < 0) {
>> +        dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
>> +        drm_panel_remove(&ctx->panel);
>> +        return ret;
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static void samsung_sofef03_m_remove(struct mipi_dsi_device *dsi)
>> +{
>> +    struct samsung_sofef03_m *ctx = mipi_dsi_get_drvdata(dsi);
>> +    int ret;
>> +
>> +    ret = mipi_dsi_detach(dsi);
>> +    if (ret < 0)
>> +        dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
>> +
>> +    drm_panel_remove(&ctx->panel);
>> +}
>> +
>> +static const struct of_device_id samsung_sofef03_m_of_match[] = {
>> +    { .compatible = "samsung,sofef03-m" },
>> +    { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, samsung_sofef03_m_of_match);
>> +
>> +static struct mipi_dsi_driver samsung_sofef03_m_driver = {
>> +    .probe = samsung_sofef03_m_probe,
>> +    .remove = samsung_sofef03_m_remove,
>> +    .driver = {
>> +        .name = "panel-samsung-sofef03-m",
>> +        .of_match_table = samsung_sofef03_m_of_match,
>> +    },
>> +};
>> +module_mipi_dsi_driver(samsung_sofef03_m_driver);
>> +
>> +MODULE_AUTHOR("Konrad Dybcio <konrad.dybcio@linaro.org>");
>> +MODULE_AUTHOR("Marijn Suijten <marijn.suijten@somainline.org>");
>> +MODULE_DESCRIPTION("DRM panel driver for Samsung SOFEF03-M Display-IC panels");
>> +MODULE_LICENSE("GPL");
>>
>