From: Matthias Brugger <matthias.bgg@gmail.com>
To: Hui-Liu Liu <hui.liu@mediatek.com>,
lee.jones@linaro.org, robh+dt@kernel.org, lgirdwood@gmail.com,
broonie@kernel.org, eddie.huang@mediatek.com,
a.zummo@towertech.it, alexandre.belloni@bootlin.com,
fshao@chromium.org
Cc: srv_heupstream@mediatek.com, zhiyong.tao@mediatek.com,
hsin-hsiung.wang@mediatek.com, sean.wang@mediatek.com,
macpaul.lin@mediatek.com, yuchen.huang@mediatek.com,
wen.su@mediatek.com, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-rtc@vger.kernel.org,
Project_Global_Chrome_Upstream_Group@mediatek.com
Subject: Re: [PATCH v2] arm64: dts: mt6359: add PMIC MT6359 nodes
Date: Mon, 28 Mar 2022 12:02:49 +0200 [thread overview]
Message-ID: <cf7ffb39-9f23-37d0-2b29-751bd2fb92ff@gmail.com> (raw)
In-Reply-To: <20220324081412.12045-2-hui.liu@mediatek.com>
On 24/03/2022 09:14, Hui-Liu Liu wrote:
> From: Hui Liu <hui.liu@mediatek.com>
>
> Add MT6359 node.
Please update commmit message describing e.g. what the node provides. For which
SoCs it is for etc.
Please also add the mediatek mailinglist, it should show up when using
get_maintainers.pl, did you used that?
Regards,
Matthias
>
> Signed-off-by: Hui Liu <hui.liu@mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt6359.dtsi | 298 +++++++++++++++++++++++
> 1 file changed, 298 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt6359.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt6359.dtsi b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
> new file mode 100644
> index 000000000000..df3e822232d3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt6359.dtsi
> @@ -0,0 +1,298 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2022 MediaTek Inc.
> + */
> +
> +&pwrap {
> + pmic: pmic {
> + compatible = "mediatek,mt6359";
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + mt6359codec: mt6359codec {
> + };
> +
> + regulators {
> + mt6359_vs1_buck_reg: buck_vs1 {
> + regulator-name = "vs1";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-enable-ramp-delay = <0>;
> + regulator-always-on;
> + };
> + mt6359_vgpu11_buck_reg: buck_vgpu11 {
> + regulator-name = "vgpu11";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-ramp-delay = <5000>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <0 1 2>;
> + };
> + mt6359_vmodem_buck_reg: buck_vmodem {
> + regulator-name = "vmodem";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-ramp-delay = <10760>;
> + regulator-enable-ramp-delay = <200>;
> + };
> + mt6359_vpu_buck_reg: buck_vpu {
> + regulator-name = "vpu";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-ramp-delay = <5000>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <0 1 2>;
> + };
> + mt6359_vcore_buck_reg: buck_vcore {
> + regulator-name = "vcore";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-ramp-delay = <5000>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <0 1 2>;
> + };
> + mt6359_vs2_buck_reg: buck_vs2 {
> + regulator-name = "vs2";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1600000>;
> + regulator-enable-ramp-delay = <0>;
> + regulator-always-on;
> + };
> + mt6359_vpa_buck_reg: buck_vpa {
> + regulator-name = "vpa";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <3650000>;
> + regulator-enable-ramp-delay = <300>;
> + };
> + mt6359_vproc2_buck_reg: buck_vproc2 {
> + regulator-name = "vproc2";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-ramp-delay = <7500>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <0 1 2>;
> + };
> + mt6359_vproc1_buck_reg: buck_vproc1 {
> + regulator-name = "vproc1";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + regulator-ramp-delay = <7500>;
> + regulator-enable-ramp-delay = <200>;
> + regulator-allowed-modes = <0 1 2>;
> + };
> + mt6359_vcore_sshub_buck_reg: buck_vcore_sshub {
> + regulator-name = "vcore_sshub";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + };
> + mt6359_vgpu11_sshub_buck_reg: buck_vgpu11_sshub {
> + regulator-name = "vgpu11_sshub";
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <1193750>;
> + };
> + mt6359_vaud18_ldo_reg: ldo_vaud18 {
> + regulator-name = "vaud18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> + mt6359_vsim1_ldo_reg: ldo_vsim1 {
> + regulator-name = "vsim1";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <3100000>;
> + };
> + mt6359_vibr_ldo_reg: ldo_vibr {
> + regulator-name = "vibr";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + mt6359_vrf12_ldo_reg: ldo_vrf12 {
> + regulator-name = "vrf12";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1300000>;
> + };
> + mt6359_vusb_ldo_reg: ldo_vusb {
> + regulator-name = "vusb";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-enable-ramp-delay = <960>;
> + regulator-always-on;
> + };
> + mt6359_vsram_proc2_ldo_reg: ldo_vsram_proc2 {
> + regulator-name = "vsram_proc2";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <7500>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> + mt6359_vio18_ldo_reg: ldo_vio18 {
> + regulator-name = "vio18";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-enable-ramp-delay = <960>;
> + regulator-always-on;
> + };
> + mt6359_vcamio_ldo_reg: ldo_vcamio {
> + regulator-name = "vcamio";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + };
> + mt6359_vcn18_ldo_reg: ldo_vcn18 {
> + regulator-name = "vcn18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> + mt6359_vfe28_ldo_reg: ldo_vfe28 {
> + regulator-name = "vfe28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <120>;
> + };
> + mt6359_vcn13_ldo_reg: ldo_vcn13 {
> + regulator-name = "vcn13";
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1300000>;
> + };
> + mt6359_vcn33_1_bt_ldo_reg: ldo_vcn33_1_bt {
> + regulator-name = "vcn33_1_bt";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3500000>;
> + };
> + mt6359_vcn33_1_wifi_ldo_reg: ldo_vcn33_1_wifi {
> + regulator-name = "vcn33_1_wifi";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3500000>;
> + };
> + mt6359_vaux18_ldo_reg: ldo_vaux18 {
> + regulator-name = "vaux18";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> + mt6359_vsram_others_ldo_reg: ldo_vsram_others {
> + regulator-name = "vsram_others";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <5000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> + mt6359_vefuse_ldo_reg: ldo_vefuse {
> + regulator-name = "vefuse";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <2000000>;
> + };
> + mt6359_vxo22_ldo_reg: ldo_vxo22 {
> + regulator-name = "vxo22";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-always-on;
> + };
> + mt6359_vrfck_ldo_reg: ldo_vrfck {
> + regulator-name = "vrfck";
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1700000>;
> + };
> + mt6359_vrfck_1_ldo_reg: ldo_vrfck_1 {
> + regulator-name = "vrfck";
> + regulator-min-microvolt = <1240000>;
> + regulator-max-microvolt = <1600000>;
> + };
> + mt6359_vbif28_ldo_reg: ldo_vbif28 {
> + regulator-name = "vbif28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-enable-ramp-delay = <240>;
> + };
> + mt6359_vio28_ldo_reg: ldo_vio28 {
> + regulator-name = "vio28";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> + mt6359_vemc_ldo_reg: ldo_vemc {
> + regulator-name = "vemc";
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + mt6359_vemc_1_ldo_reg: ldo_vemc_1 {
> + regulator-name = "vemc";
> + regulator-min-microvolt = <2500000>;
> + regulator-max-microvolt = <3300000>;
> + };
> + mt6359_vcn33_2_bt_ldo_reg: ldo_vcn33_2_bt {
> + regulator-name = "vcn33_2_bt";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3500000>;
> + };
> + mt6359_vcn33_2_wifi_ldo_reg: ldo_vcn33_2_wifi {
> + regulator-name = "vcn33_2_wifi";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3500000>;
> + };
> + mt6359_va12_ldo_reg: ldo_va12 {
> + regulator-name = "va12";
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1300000>;
> + regulator-always-on;
> + };
> + mt6359_va09_ldo_reg: ldo_va09 {
> + regulator-name = "va09";
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1200000>;
> + };
> + mt6359_vrf18_ldo_reg: ldo_vrf18 {
> + regulator-name = "vrf18";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1810000>;
> + };
> + mt6359_vsram_md_ldo_reg: ldo_vsram_md {
> + regulator-name = "vsram_md";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <10760>;
> + regulator-enable-ramp-delay = <240>;
> + };
> + mt6359_vufs_ldo_reg: ldo_vufs {
> + regulator-name = "vufs";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + };
> + mt6359_vm18_ldo_reg: ldo_vm18 {
> + regulator-name = "vm18";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <1900000>;
> + regulator-always-on;
> + };
> + mt6359_vbbck_ldo_reg: ldo_vbbck {
> + regulator-name = "vbbck";
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1200000>;
> + };
> + mt6359_vsram_proc1_ldo_reg: ldo_vsram_proc1 {
> + regulator-name = "vsram_proc1";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + regulator-ramp-delay = <7500>;
> + regulator-enable-ramp-delay = <240>;
> + regulator-always-on;
> + };
> + mt6359_vsim2_ldo_reg: ldo_vsim2 {
> + regulator-name = "vsim2";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <3100000>;
> + };
> + mt6359_vsram_others_sshub_ldo: ldo_vsram_others_sshub {
> + regulator-name = "vsram_others_sshub";
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1293750>;
> + };
> + };
> +
> + mt6359rtc: mt6359rtc {
> + compatible = "mediatek,mt6358-rtc";
> + };
> + };
> +};
> --
> 2.25.1
>
> ************* MEDIATEK Confidentiality Notice
> ********************
> The information contained in this e-mail message (including any
> attachments) may be confidential, proprietary, privileged, or otherwise
> exempt from disclosure under applicable laws. It is intended to be
> conveyed only to the designated recipient(s). Any use, dissemination,
> distribution, printing, retaining or copying of this e-mail (including its
> attachments) by unintended recipient(s) is strictly prohibited and may
> be unlawful. If you are not an intended recipient of this e-mail, or believe
>
> that you have received this e-mail in error, please notify the sender
> immediately (by replying to this e-mail), delete any and all copies of
> this e-mail (including any attachments) from your system, and do not
> disclose the content of this e-mail to any other person. Thank you!
prev parent reply other threads:[~2022-03-28 10:02 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-24 8:14 [PATCH v2 0/2] Add mt6359 node for MediaTek PMIC MT6359 Hui-Liu Liu
2022-03-24 8:14 ` [PATCH v2] arm64: dts: mt6359: add PMIC MT6359 nodes Hui-Liu Liu
2022-03-26 8:45 ` Macpaul Lin
2022-03-28 10:02 ` Matthias Brugger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cf7ffb39-9f23-37d0-2b29-751bd2fb92ff@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=eddie.huang@mediatek.com \
--cc=fshao@chromium.org \
--cc=hsin-hsiung.wang@mediatek.com \
--cc=hui.liu@mediatek.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=macpaul.lin@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=sean.wang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=wen.su@mediatek.com \
--cc=yuchen.huang@mediatek.com \
--cc=zhiyong.tao@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).