From mboxrd@z Thu Jan 1 00:00:00 1970 From: Viresh Kumar Subject: [PATCH V4 7/7] ARM: ZTE: Use - instead of @ for DT OPP entries Date: Thu, 20 Apr 2017 11:14:18 +0530 Message-ID: References: Return-path: In-Reply-To: In-Reply-To: References: Sender: linux-pm-owner@vger.kernel.org To: arm@kernel.org Cc: linaro-kernel@lists.linaro.org, linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org, Rafael Wysocki , Viresh Kumar , Krzysztof Kozlowski , Masahiro Yamada , Mark Rutland , Rob Herring , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski Reported-by: Masahiro Yamada Suggested-by: Mark Rutland Signed-off-by: Viresh Kumar Acked-by: Rob Herring --- arch/arm64/boot/dts/zte/zx296718.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index b850b2cd0adc..2c7dc69987df 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -118,27 +118,27 @@ compatible = "operating-points-v2"; opp-shared; - opp@500000000 { + opp-500000000 { opp-hz = /bits/ 64 <500000000>; clock-latency-ns = <500000>; }; - opp@648000000 { + opp-648000000 { opp-hz = /bits/ 64 <648000000>; clock-latency-ns = <500000>; }; - opp@800000000 { + opp-800000000 { opp-hz = /bits/ 64 <800000000>; clock-latency-ns = <500000>; }; - opp@1000000000 { + opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; clock-latency-ns = <500000>; }; - opp@1188000000 { + opp-1188000000 { opp-hz = /bits/ 64 <1188000000>; clock-latency-ns = <500000>; }; -- 2.12.0.432.g71c3a4f4ba37