* [PATCH 0/2] Add ipg clock control to sai driver
@ 2014-04-01 11:52 Nicolin Chen
2014-04-01 11:52 ` [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI Nicolin Chen
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Nicolin Chen @ 2014-04-01 11:52 UTC (permalink / raw)
To: broonie, shawn.guo
Cc: linux-kernel, linuxppc-dev, alsa-devel, timur, Li.Xiubo,
linux-doc, devicetree, rob, galak, ijc+devicetree, mark.rutland,
pawel.moll, robh+dt
This series of patches add ipg clock control to fsl_sai driver and updates
the vf610.dtsi accordingly.
@Shawn
I'm not sure if VF610 currently does full works with SAI audio function.
The PATCH-2 is based on broonie/for-next.
Nicolin Chen (2):
ASoC: fsl_sai: Add clock control for SAI
ARM: dts: Add ipg clock for sai2 on VF610 platform
.../devicetree/bindings/sound/fsl-sai.txt | 7 ++--
arch/arm/boot/dts/vf610.dtsi | 4 +--
sound/soc/fsl/fsl_sai.c | 37 ++++++++++++++++++++--
sound/soc/fsl/fsl_sai.h | 2 ++
4 files changed, 43 insertions(+), 7 deletions(-)
--
1.8.4
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI 2014-04-01 11:52 [PATCH 0/2] Add ipg clock control to sai driver Nicolin Chen @ 2014-04-01 11:52 ` Nicolin Chen 2014-04-04 9:24 ` Li.Xiubo [not found] ` <cover.1396352401.git.Guangyu.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org> 2014-04-02 8:01 ` [PATCH 0/2] Add ipg clock control to sai driver Nicolin Chen 2 siblings, 1 reply; 8+ messages in thread From: Nicolin Chen @ 2014-04-01 11:52 UTC (permalink / raw) To: broonie, shawn.guo Cc: linux-kernel, linuxppc-dev, alsa-devel, timur, Li.Xiubo, linux-doc, devicetree, rob, galak, ijc+devicetree, mark.rutland, pawel.moll, robh+dt The SAI mainly has two clocks: ipg_clock -- registers access for SoC or DMA to read and write. sai_clock -- providing DAI format bit clock and frame clock. Thus this patch adds these two clocks to the driver with their clock controls and replaces the regmap clock 'sai_clock' with 'ipg_clock'. Signed-off-by: Nicolin Chen <Guangyu.Chen@freescale.com> --- .../devicetree/bindings/sound/fsl-sai.txt | 7 ++-- sound/soc/fsl/fsl_sai.c | 37 ++++++++++++++++++++-- sound/soc/fsl/fsl_sai.h | 2 ++ 3 files changed, 41 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 35c09fe..bad4453 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -11,5 +11,6 @@ Required properties: - reg: Offset and length of the register set for the device. - clocks: Must contain an entry for each entry in clock-names. -- clock-names : Must include the "sai" entry. +- clock-names : Must include the "ipg" for register access and "sai" for bit + clock and frame clock providing. - dmas : Generic dma devicetree binding as described in Documentation/devicetree/bindings/dma/dma.txt. @@ -31,6 +32,6 @@ sai2: sai@40031000 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sai2_1>; - clocks = <&clks VF610_CLK_SAI2>; - clock-names = "sai"; + clocks = <&clks VF610_CLK_SAI2>, <&clks VF610_CLK_SAI2>; + clock-names = "ipg", "sai"; dma-names = "tx", "rx"; dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>, diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 3847d2a..2d749df 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -428,5 +428,18 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream, { struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); - u32 reg; + struct device *dev = &sai->pdev->dev; + u32 reg, ret; + + ret = clk_prepare_enable(sai->ipg_clk); + if (ret) { + dev_err(dev, "failed to prepare and enable ipg clock\n"); + return ret; + } + + ret = clk_prepare_enable(sai->sai_clk); + if (ret) { + dev_err(dev, "failed to prepare and enable sai clock\n"); + goto err; + } if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) @@ -439,4 +452,9 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream, return 0; + +err: + clk_disable_unprepare(sai->ipg_clk); + + return ret; } @@ -454,4 +472,7 @@ static void fsl_sai_shutdown(struct snd_pcm_substream *substream, regmap_update_bits(sai->regmap, reg, FSL_SAI_CR3_TRCE, ~FSL_SAI_CR3_TRCE); + + clk_disable_unprepare(sai->sai_clk); + clk_disable_unprepare(sai->ipg_clk); } @@ -609,5 +630,5 @@ static int fsl_sai_probe(struct platform_device *pdev) sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev, - "sai", base, &fsl_sai_regmap_config); + "ipg", base, &fsl_sai_regmap_config); if (IS_ERR(sai->regmap)) { dev_err(&pdev->dev, "regmap init failed\n"); @@ -615,4 +636,16 @@ static int fsl_sai_probe(struct platform_device *pdev) } + sai->ipg_clk = devm_clk_get(&pdev->dev, "ipg"); + if (IS_ERR(sai->ipg_clk)) { + dev_err(&pdev->dev, "failed to get ipg clock\n"); + return PTR_ERR(sai->ipg_clk); + } + + sai->sai_clk = devm_clk_get(&pdev->dev, "sai"); + if (IS_ERR(sai->sai_clk)) { + dev_err(&pdev->dev, "failed to get sai clock\n"); + return PTR_ERR(sai->sai_clk); + } + irq = platform_get_irq(pdev, 0); if (irq < 0) { diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 677670d..cbaf114 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -127,4 +127,6 @@ struct fsl_sai { struct platform_device *pdev; struct regmap *regmap; + struct clk *ipg_clk; + struct clk *sai_clk; bool big_endian_regs; -- 1.8.4 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* RE: [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI 2014-04-01 11:52 ` [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI Nicolin Chen @ 2014-04-04 9:24 ` Li.Xiubo 2014-04-04 9:28 ` Nicolin Chen 0 siblings, 1 reply; 8+ messages in thread From: Li.Xiubo @ 2014-04-04 9:24 UTC (permalink / raw) To: guangyu.chen@freescale.com, broonie@kernel.org, shawn.guo@linaro.org Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, alsa-devel@alsa-project.org, timur@tabi.org, linux-doc@vger.kernel.org, devicetree@vger.kernel.org, rob@landley.net, galak@codeaurora.org, ijc+devicetree@hellion.org.uk, mark.rutland@arm.com, pawel.moll@arm.com, robh+dt@kernel.org Hi, I have test this series on my Vybrid-TWR board and it works happily. [...] > diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c > index 3847d2a..2d749df 100644 > --- a/sound/soc/fsl/fsl_sai.c > +++ b/sound/soc/fsl/fsl_sai.c > @@ -428,5 +428,18 @@ static int fsl_sai_startup(struct snd_pcm_substream > *substream, > { > struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); > - u32 reg; > + struct device *dev = &sai->pdev->dev; > + u32 reg, ret; > + I'd prefer: + int ret; > + ret = clk_prepare_enable(sai->ipg_clk); > + if (ret) { > + dev_err(dev, "failed to prepare and enable ipg clock\n"); > + return ret; > + } > + [...] > @@ -609,5 +630,5 @@ static int fsl_sai_probe(struct platform_device *pdev) > > sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev, > - "sai", base, &fsl_sai_regmap_config); > + "ipg", base, &fsl_sai_regmap_config); > if (IS_ERR(sai->regmap)) { > dev_err(&pdev->dev, "regmap init failed\n"); > @@ -615,4 +636,16 @@ static int fsl_sai_probe(struct platform_device *pdev) > } > > + sai->ipg_clk = devm_clk_get(&pdev->dev, "ipg"); > + if (IS_ERR(sai->ipg_clk)) { > + dev_err(&pdev->dev, "failed to get ipg clock\n"); > + return PTR_ERR(sai->ipg_clk); > + } > + Since the 'ipg' clock is just intend to be used for registers accessing and We are using the regmap_init_mmio_clk(), so we can just drop it here and Let the regmap APIs to do the clock options properly. Otherwise it look good to me. After this: Acked-by: Xiubo Li <Li.Xiubo@freescale.com> Thanks, Brs, Xiubo > + sai->sai_clk = devm_clk_get(&pdev->dev, "sai"); > + if (IS_ERR(sai->sai_clk)) { > + dev_err(&pdev->dev, "failed to get sai clock\n"); > + return PTR_ERR(sai->sai_clk); > + } > + > irq = platform_get_irq(pdev, 0); > if (irq < 0) { > diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h > index 677670d..cbaf114 100644 > --- a/sound/soc/fsl/fsl_sai.h > +++ b/sound/soc/fsl/fsl_sai.h > @@ -127,4 +127,6 @@ struct fsl_sai { > struct platform_device *pdev; > struct regmap *regmap; > + struct clk *ipg_clk; > + struct clk *sai_clk; > > bool big_endian_regs; > -- > 1.8.4 > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI 2014-04-04 9:24 ` Li.Xiubo @ 2014-04-04 9:28 ` Nicolin Chen 2014-04-04 9:43 ` Li.Xiubo 0 siblings, 1 reply; 8+ messages in thread From: Nicolin Chen @ 2014-04-04 9:28 UTC (permalink / raw) To: Xiubo Li-B47053 Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, alsa-devel@alsa-project.org, pawel.moll@arm.com, linux-doc@vger.kernel.org, ijc+devicetree@hellion.org.uk, timur@tabi.org, robh+dt@kernel.org, linux-kernel@vger.kernel.org, broonie@kernel.org, rob@landley.net, galak@codeaurora.org, shawn.guo@linaro.org, linuxppc-dev@lists.ozlabs.org Hi Xiubo, On Fri, Apr 04, 2014 at 05:24:39PM +0800, Xiubo Li-B47053 wrote: > Hi, > > I have test this series on my Vybrid-TWR board and it works happily. You just checked the wrong version. I've sent a mail to let people disregard this version and a newer v2. > > [...] > > diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c > > index 3847d2a..2d749df 100644 > > --- a/sound/soc/fsl/fsl_sai.c > > +++ b/sound/soc/fsl/fsl_sai.c > > @@ -428,5 +428,18 @@ static int fsl_sai_startup(struct snd_pcm_substream > > *substream, > > { > > struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); > > - u32 reg; > > + struct device *dev = &sai->pdev->dev; > > + u32 reg, ret; > > + > > I'd prefer: > + int ret; Just like last time I said, it would be converted to 'int' any way. There's no much difference between them. > > > + ret = clk_prepare_enable(sai->ipg_clk); > > + if (ret) { > > + dev_err(dev, "failed to prepare and enable ipg clock\n"); > > + return ret; > > + } > > + > > [...] > > > @@ -609,5 +630,5 @@ static int fsl_sai_probe(struct platform_device *pdev) > > > > sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev, > > - "sai", base, &fsl_sai_regmap_config); > > + "ipg", base, &fsl_sai_regmap_config); > > if (IS_ERR(sai->regmap)) { > > dev_err(&pdev->dev, "regmap init failed\n"); > > @@ -615,4 +636,16 @@ static int fsl_sai_probe(struct platform_device *pdev) > > } > > > > + sai->ipg_clk = devm_clk_get(&pdev->dev, "ipg"); > > + if (IS_ERR(sai->ipg_clk)) { > > + dev_err(&pdev->dev, "failed to get ipg clock\n"); > > + return PTR_ERR(sai->ipg_clk); > > + } > > + > > Since the 'ipg' clock is just intend to be used for registers accessing and > We are using the regmap_init_mmio_clk(), so we can just drop it here and > Let the regmap APIs to do the clock options properly. This 'ipg' clock, which I renamed in v2 to 'bus clock', is not just used in the way you said but also able to drive bit clock as your own code in the fsl_sai_set_dai_sysclk_tr(), and as reference manual describes: 52.3.1.3 Bus clock The bus clock is used by the control and configuration registers and to generate synchronous interrupts and DMA requests. Thanks, Nicolin > > Otherwise it look good to me. > > After this: > Acked-by: Xiubo Li <Li.Xiubo@freescale.com> > > > > Thanks, > > Brs, > Xiubo > > > > > > + sai->sai_clk = devm_clk_get(&pdev->dev, "sai"); > > + if (IS_ERR(sai->sai_clk)) { > > + dev_err(&pdev->dev, "failed to get sai clock\n"); > > + return PTR_ERR(sai->sai_clk); > > + } > > + > > irq = platform_get_irq(pdev, 0); > > if (irq < 0) { > > diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h > > index 677670d..cbaf114 100644 > > --- a/sound/soc/fsl/fsl_sai.h > > +++ b/sound/soc/fsl/fsl_sai.h > > @@ -127,4 +127,6 @@ struct fsl_sai { > > struct platform_device *pdev; > > struct regmap *regmap; > > + struct clk *ipg_clk; > > + struct clk *sai_clk; > > > > bool big_endian_regs; > > -- > > 1.8.4 > > > ^ permalink raw reply [flat|nested] 8+ messages in thread
* RE: [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI 2014-04-04 9:28 ` Nicolin Chen @ 2014-04-04 9:43 ` Li.Xiubo 2014-04-04 9:38 ` Nicolin Chen 0 siblings, 1 reply; 8+ messages in thread From: Li.Xiubo @ 2014-04-04 9:43 UTC (permalink / raw) To: guangyu.chen@freescale.com Cc: broonie@kernel.org, shawn.guo@linaro.org, linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, alsa-devel@alsa-project.org, timur@tabi.org, linux-doc@vger.kernel.org, devicetree@vger.kernel.org, rob@landley.net, galak@codeaurora.org, ijc+devicetree@hellion.org.uk, mark.rutland@arm.com, pawel.moll@arm.com, robh+dt@kernel.org > Subject: Re: [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI > > Hi Xiubo, > > On Fri, Apr 04, 2014 at 05:24:39PM +0800, Xiubo Li-B47053 wrote: > > Hi, > > > > I have test this series on my Vybrid-TWR board and it works happily. > > You just checked the wrong version. I've sent a mail to let people disregard > this version and a newer v2. > Sorry, I didn't receive these, I will search it in the web page. > > > > [...] > > > diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c > > > index 3847d2a..2d749df 100644 > > > --- a/sound/soc/fsl/fsl_sai.c > > > +++ b/sound/soc/fsl/fsl_sai.c > > > @@ -428,5 +428,18 @@ static int fsl_sai_startup(struct snd_pcm_substream > > > *substream, > > > { > > > struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); > > > - u32 reg; > > > + struct device *dev = &sai->pdev->dev; > > > + u32 reg, ret; > > > + > > > > I'd prefer: > > + int ret; > > Just like last time I said, it would be converted to 'int' any way. There's > no much difference between them. > Yes, it is... I have ever encounter something like this in the feature maybe someone will do the following check: If (ret < 0) ... Just one potential problem and one suggestion. Thanks, > > > > > + ret = clk_prepare_enable(sai->ipg_clk); > > > + if (ret) { > > > + dev_err(dev, "failed to prepare and enable ipg clock\n"); > > > + return ret; > > > + } > > > + > > > > [...] > > > > > @@ -609,5 +630,5 @@ static int fsl_sai_probe(struct platform_device *pdev) > > > > > > sai->regmap = devm_regmap_init_mmio_clk(&pdev->dev, > > > - "sai", base, &fsl_sai_regmap_config); > > > + "ipg", base, &fsl_sai_regmap_config); > > > if (IS_ERR(sai->regmap)) { > > > dev_err(&pdev->dev, "regmap init failed\n"); > > > @@ -615,4 +636,16 @@ static int fsl_sai_probe(struct platform_device *pdev) > > > } > > > > > > + sai->ipg_clk = devm_clk_get(&pdev->dev, "ipg"); > > > + if (IS_ERR(sai->ipg_clk)) { > > > + dev_err(&pdev->dev, "failed to get ipg clock\n"); > > > + return PTR_ERR(sai->ipg_clk); > > > + } > > > + > > > > Since the 'ipg' clock is just intend to be used for registers accessing and > > We are using the regmap_init_mmio_clk(), so we can just drop it here and > > Let the regmap APIs to do the clock options properly. > > This 'ipg' clock, which I renamed in v2 to 'bus clock', is not just used > in the way you said but also able to drive bit clock as your own code in > the fsl_sai_set_dai_sysclk_tr(), and as reference manual describes: > > 52.3.1.3 Bus clock > The bus clock is used by the control and configuration registers and to > generate synchronous interrupts and DMA requests. > > Thanks, > Nicolin > > > > > Otherwise it look good to me. > > > > After this: > > Acked-by: Xiubo Li <Li.Xiubo@freescale.com> > > > > > > > > Thanks, > > > > Brs, > > Xiubo > > > > > > > > > > > + sai->sai_clk = devm_clk_get(&pdev->dev, "sai"); > > > + if (IS_ERR(sai->sai_clk)) { > > > + dev_err(&pdev->dev, "failed to get sai clock\n"); > > > + return PTR_ERR(sai->sai_clk); > > > + } > > > + > > > irq = platform_get_irq(pdev, 0); > > > if (irq < 0) { > > > diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h > > > index 677670d..cbaf114 100644 > > > --- a/sound/soc/fsl/fsl_sai.h > > > +++ b/sound/soc/fsl/fsl_sai.h > > > @@ -127,4 +127,6 @@ struct fsl_sai { > > > struct platform_device *pdev; > > > struct regmap *regmap; > > > + struct clk *ipg_clk; > > > + struct clk *sai_clk; > > > > > > bool big_endian_regs; > > > -- > > > 1.8.4 > > > > > ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI 2014-04-04 9:43 ` Li.Xiubo @ 2014-04-04 9:38 ` Nicolin Chen 0 siblings, 0 replies; 8+ messages in thread From: Nicolin Chen @ 2014-04-04 9:38 UTC (permalink / raw) To: Xiubo Li-B47053 Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, alsa-devel@alsa-project.org, pawel.moll@arm.com, linux-doc@vger.kernel.org, ijc+devicetree@hellion.org.uk, timur@tabi.org, robh+dt@kernel.org, linux-kernel@vger.kernel.org, broonie@kernel.org, rob@landley.net, galak@codeaurora.org, shawn.guo@linaro.org, linuxppc-dev@lists.ozlabs.org On Fri, Apr 04, 2014 at 05:43:12PM +0800, Xiubo Li-B47053 wrote: > > Subject: Re: [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI > > > > Hi Xiubo, > > > > On Fri, Apr 04, 2014 at 05:24:39PM +0800, Xiubo Li-B47053 wrote: > > > Hi, > > > > > > I have test this series on my Vybrid-TWR board and it works happily. > > > > You just checked the wrong version. I've sent a mail to let people disregard > > this version and a newer v2. > > > > Sorry, I didn't receive these, I will search it in the web page. > > > > > > > [...] > > > > diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c > > > > index 3847d2a..2d749df 100644 > > > > --- a/sound/soc/fsl/fsl_sai.c > > > > +++ b/sound/soc/fsl/fsl_sai.c > > > > @@ -428,5 +428,18 @@ static int fsl_sai_startup(struct snd_pcm_substream > > > > *substream, > > > > { > > > > struct fsl_sai *sai = snd_soc_dai_get_drvdata(cpu_dai); > > > > - u32 reg; > > > > + struct device *dev = &sai->pdev->dev; > > > > + u32 reg, ret; > > > > + > > > > > > I'd prefer: > > > + int ret; > > > > Just like last time I said, it would be converted to 'int' any way. There's > > no much difference between them. > > > > Yes, it is... > > I have ever encounter something like this in the feature maybe someone will > do the following check: > > If (ret < 0) > ... > > Just one potential problem and one suggestion. Fine...I'll revise it as you wish..after you checked the v2. Thanks, Nicolin ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <cover.1396352401.git.Guangyu.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>]
* [PATCH 2/2] ARM: dts: Add ipg clock for sai2 on VF610 platform [not found] ` <cover.1396352401.git.Guangyu.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org> @ 2014-04-01 11:52 ` Nicolin Chen 0 siblings, 0 replies; 8+ messages in thread From: Nicolin Chen @ 2014-04-01 11:52 UTC (permalink / raw) To: broonie-DgEjT+Ai2ygdnm+yROfE0A, shawn.guo-QSEj5FYQhm4dnm+yROfE0A Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, linuxppc-dev-uLR06cmDAlY/bJ5BZ2RsiQ, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw, timur-N01EOCouUvQ, Li.Xiubo-KZfg59tc24xl57MIdRCFDg, linux-doc-u79uwXL29TY76Z2rM5mHXA, devicetree-u79uwXL29TY76Z2rM5mHXA, rob-VoJi6FS/r0vR7s880joybQ, galak-sgV2jX0FEOL9JmXXK+q4OQ, ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg, mark.rutland-5wv7dgnIgG8, pawel.moll-5wv7dgnIgG8, robh+dt-DgEjT+Ai2ygdnm+yROfE0A Since we added ipg clock to the DT binding, we should update the current SAI dts/dtsi so as not to break their functions. Signed-off-by: Nicolin Chen <Guangyu.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org> --- arch/arm/boot/dts/vf610.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index d31ce1b..493c498 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -140,6 +140,6 @@ reg = <0x40031000 0x1000>; interrupts = <0 86 0x04>; - clocks = <&clks VF610_CLK_SAI2>; - clock-names = "sai"; + clocks = <&clks VF610_CLK_SAI2>, <&clks VF610_CLK_SAI2>; + clock-names = "ipg", "sai"; status = "disabled"; }; -- 1.8.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 0/2] Add ipg clock control to sai driver 2014-04-01 11:52 [PATCH 0/2] Add ipg clock control to sai driver Nicolin Chen 2014-04-01 11:52 ` [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI Nicolin Chen [not found] ` <cover.1396352401.git.Guangyu.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org> @ 2014-04-02 8:01 ` Nicolin Chen 2 siblings, 0 replies; 8+ messages in thread From: Nicolin Chen @ 2014-04-02 8:01 UTC (permalink / raw) To: Nicolin Chen Cc: mark.rutland, devicetree, alsa-devel, pawel.moll, linux-doc, Li.Xiubo, ijc+devicetree, linux-kernel, robh+dt, Timur Tabi, broonie, rob, galak, Shawn Guo, linuxppc-dev Please disregard this version. SAI actually has three master clocks and one bus clock. So the patch should have added three sai_clks to the driver. I'll later send v2 to append the other two. Thank you. On Tue, Apr 1, 2014 at 7:52 PM, Nicolin Chen <Guangyu.Chen@freescale.com>wrote: > This series of patches add ipg clock control to fsl_sai driver and updates > the vf610.dtsi accordingly. > > @Shawn > I'm not sure if VF610 currently does full works with SAI audio function. > The PATCH-2 is based on broonie/for-next. > > Nicolin Chen (2): > ASoC: fsl_sai: Add clock control for SAI > ARM: dts: Add ipg clock for sai2 on VF610 platform > > .../devicetree/bindings/sound/fsl-sai.txt | 7 ++-- > arch/arm/boot/dts/vf610.dtsi | 4 +-- > sound/soc/fsl/fsl_sai.c | 37 > ++++++++++++++++++++-- > sound/soc/fsl/fsl_sai.h | 2 ++ > 4 files changed, 43 insertions(+), 7 deletions(-) > > -- > 1.8.4 > > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel@alsa-project.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-04-04 9:43 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-01 11:52 [PATCH 0/2] Add ipg clock control to sai driver Nicolin Chen
2014-04-01 11:52 ` [PATCH 1/2] ASoC: fsl_sai: Add clock control for SAI Nicolin Chen
2014-04-04 9:24 ` Li.Xiubo
2014-04-04 9:28 ` Nicolin Chen
2014-04-04 9:43 ` Li.Xiubo
2014-04-04 9:38 ` Nicolin Chen
[not found] ` <cover.1396352401.git.Guangyu.Chen-KZfg59tc24xl57MIdRCFDg@public.gmane.org>
2014-04-01 11:52 ` [PATCH 2/2] ARM: dts: Add ipg clock for sai2 on VF610 platform Nicolin Chen
2014-04-02 8:01 ` [PATCH 0/2] Add ipg clock control to sai driver Nicolin Chen
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).