[PATCH 0/2] ARM: dts: add initial Colibri VF61 board support

[PATCH 0/2] ARM: dts: add initial Colibri VF61 board support

[stefan-XLVq0VzYD2Y]

From: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>

This patches add initial support for Toradex Colibri VF61
computer-on-module.

Stefan Agner (2):
  of: add vendor prefix for Toradex AG
  ARM: dts: add initial Colibri VF61 board support

 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/vf610-colibri.dts                | 123 +++++++++++++++++++++
 3 files changed, 125 insertions(+)
 create mode 100644 arch/arm/boot/dts/vf610-colibri.dts

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 1/2] of: add vendor prefix for Toradex AG

[stefan-XLVq0VzYD2Y]

From: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>

Adds toradex to the list of DT vendor prefixes.

Signed-off-by: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
---
 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index e9d19e2..6a68eae 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -91,6 +91,7 @@ ti	Texas Instruments
 tlm	Trusted Logic Mobility
 toshiba	Toshiba Corporation
 toumaz	Toumaz
+toradex	Toradex AG
 v3	V3 Semiconductor
 via	VIA Technologies, Inc.
 voipac	Voipac Technologies s.r.o.
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] of: add vendor prefix for Toradex AG

[Rob Herring]

On Wed, Apr 2, 2014 at 11:47 AM,  <stefan-XLVq0VzYD2Y@public.gmane.org> wrote:
> From: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
>
> Adds toradex to the list of DT vendor prefixes.
>
> Signed-off-by: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>

Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>

> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index e9d19e2..6a68eae 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -91,6 +91,7 @@ ti    Texas Instruments
>  tlm    Trusted Logic Mobility
>  toshiba        Toshiba Corporation
>  toumaz Toumaz
> +toradex        Toradex AG
>  v3     V3 Semiconductor
>  via    VIA Technologies, Inc.
>  voipac Voipac Technologies s.r.o.
> --
> 1.9.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/2] of: add vendor prefix for Toradex AG

[Lothar Waßmann]

Hi,

stefan-XLVq0VzYD2Y@public.gmane.org wrote:
> From: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
> 
> Adds toradex to the list of DT vendor prefixes.
> 
> Signed-off-by: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
> ---
>  Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index e9d19e2..6a68eae 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -91,6 +91,7 @@ ti	Texas Instruments
>  tlm	Trusted Logic Mobility
>  toshiba	Toshiba Corporation
>  toumaz	Toumaz
> +toradex	Toradex AG

The alphabet seems to be a concept that is very hard to grasp for
programmers... ;)
In my version 'r' is located before 's'.


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info-AvR2QvxeiV7DiMYJYoSAnRvVK+yQ3ZXh@public.gmane.org
___________________________________________________________
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/2] ARM: dts: add initial Colibri VF61 board support

[stefan-XLVq0VzYD2Y]

From: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>

Add initial Toradex Colibri VF61 board support. Ethernet, UART
and SDHC cards are working. Cache latencies need to be a bit
higher than vf610.dtsi suggests. Those values are validated
by running multiple memory tests.

Signed-off-by: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
---
 arch/arm/boot/dts/Makefile          |   1 +
 arch/arm/boot/dts/vf610-colibri.dts | 123 ++++++++++++++++++++++++++++++++++++
 2 files changed, 124 insertions(+)
 create mode 100644 arch/arm/boot/dts/vf610-colibri.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 23d7768..81b3885 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -190,6 +190,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx6q-udoo.dtb \
 	imx6q-wandboard.dtb \
 	imx6sl-evk.dtb \
+	vf610-colibri.dtb \
 	vf610-cosmic.dtb \
 	vf610-twr.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dts
new file mode 100644
index 0000000..3ac34e6
--- /dev/null
+++ b/arch/arm/boot/dts/vf610-colibri.dts
@@ -0,0 +1,123 @@
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf610.dtsi"
+
+/ {
+	model = "Toradex Colibri VF61 COM";
+	compatible = "toradex,vf610-colibri", "fsl,vf610";
+
+	chosen {
+		bootargs = "console=ttyLP0,115200";
+	};
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+
+	clocks {
+		enet_ext {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+	};
+
+};
+
+&iomuxc {
+	vf610-colibri {
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,fsl,pins = <
+				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
+				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
+				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
+				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
+				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
+				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
+				VF610_PAD_PTB20__GPIO_42	0x219d
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
+				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
+				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
+				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
+				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
+				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
+				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
+				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
+				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
+			>;
+		};
+
+		pinctrl_uart0: uart0grp {
+			fsl,pins = <
+				VF610_PAD_PTB10__UART0_TX		0x21a2
+				VF610_PAD_PTB11__UART0_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				VF610_PAD_PTB4__UART1_TX		0x21a2
+				VF610_PAD_PTB5__UART1_RX		0x21a1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				VF610_PAD_PTD0__UART2_TX		0x21a2
+				VF610_PAD_PTD1__UART2_RX		0x21a1
+				VF610_PAD_PTD2__UART2_RTS		0x21a2
+				VF610_PAD_PTD3__UART2_CTS		0x21a1
+			>;
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&L2 {
+	arm,data-latency = <2 1 2>;
+	arm,tag-latency = <3 2 3>;
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 2/2] ARM: dts: add initial Colibri VF61 board support

[Shawn Guo]

On Wed, Apr 02, 2014 at 06:47:27PM +0200, stefan-XLVq0VzYD2Y@public.gmane.org wrote:
> From: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
> 
> Add initial Toradex Colibri VF61 board support. Ethernet, UART
> and SDHC cards are working. Cache latencies need to be a bit
> higher than vf610.dtsi suggests. Those values are validated
> by running multiple memory tests.
> 
> Signed-off-by: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>

Looks good to me.  Only one minor comment below.

> ---
>  arch/arm/boot/dts/Makefile          |   1 +
>  arch/arm/boot/dts/vf610-colibri.dts | 123 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 124 insertions(+)
>  create mode 100644 arch/arm/boot/dts/vf610-colibri.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 23d7768..81b3885 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -190,6 +190,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
>  	imx6q-udoo.dtb \
>  	imx6q-wandboard.dtb \
>  	imx6sl-evk.dtb \
> +	vf610-colibri.dtb \
>  	vf610-cosmic.dtb \
>  	vf610-twr.dtb
>  dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
> diff --git a/arch/arm/boot/dts/vf610-colibri.dts b/arch/arm/boot/dts/vf610-colibri.dts
> new file mode 100644
> index 0000000..3ac34e6
> --- /dev/null
> +++ b/arch/arm/boot/dts/vf610-colibri.dts
> @@ -0,0 +1,123 @@
> +/*
> + * Copyright 2014 Toradex AG
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +/dts-v1/;
> +#include "vf610.dtsi"
> +
> +/ {
> +	model = "Toradex Colibri VF61 COM";
> +	compatible = "toradex,vf610-colibri", "fsl,vf610";
> +
> +	chosen {
> +		bootargs = "console=ttyLP0,115200";
> +	};
> +
> +	memory {
> +		reg = <0x80000000 0x10000000>;
> +	};
> +
> +	clocks {
> +		enet_ext {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-frequency = <50000000>;
> +		};
> +	};
> +
> +};
> +
> +&iomuxc {

I would suggest to put this node at the bottom of the file, since it
will have a lot more data than other nodes.  Doing so will make reading
of the file a little easier.

Shawn

> +	vf610-colibri {
> +		pinctrl_esdhc1: esdhc1grp {
> +			fsl,fsl,pins = <
> +				VF610_PAD_PTA24__ESDHC1_CLK	0x31ef
> +				VF610_PAD_PTA25__ESDHC1_CMD	0x31ef
> +				VF610_PAD_PTA26__ESDHC1_DAT0	0x31ef
> +				VF610_PAD_PTA27__ESDHC1_DAT1	0x31ef
> +				VF610_PAD_PTA28__ESDHC1_DATA2	0x31ef
> +				VF610_PAD_PTA29__ESDHC1_DAT3	0x31ef
> +				VF610_PAD_PTB20__GPIO_42	0x219d
> +			>;
> +		};
> +
> +		pinctrl_fec1: fec1grp {
> +			fsl,pins = <
> +				VF610_PAD_PTC9__ENET_RMII1_MDC		0x30d2
> +				VF610_PAD_PTC10__ENET_RMII1_MDIO	0x30d3
> +				VF610_PAD_PTC11__ENET_RMII1_CRS		0x30d1
> +				VF610_PAD_PTC12__ENET_RMII_RXD1		0x30d1
> +				VF610_PAD_PTC13__ENET_RMII1_RXD0	0x30d1
> +				VF610_PAD_PTC14__ENET_RMII1_RXER	0x30d1
> +				VF610_PAD_PTC15__ENET_RMII1_TXD1	0x30d2
> +				VF610_PAD_PTC16__ENET_RMII1_TXD0	0x30d2
> +				VF610_PAD_PTC17__ENET_RMII1_TXEN	0x30d2
> +			>;
> +		};
> +
> +		pinctrl_uart0: uart0grp {
> +			fsl,pins = <
> +				VF610_PAD_PTB10__UART0_TX		0x21a2
> +				VF610_PAD_PTB11__UART0_RX		0x21a1
> +			>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <
> +				VF610_PAD_PTB4__UART1_TX		0x21a2
> +				VF610_PAD_PTB5__UART1_RX		0x21a1
> +			>;
> +		};
> +
> +		pinctrl_uart2: uart2grp {
> +			fsl,pins = <
> +				VF610_PAD_PTD0__UART2_TX		0x21a2
> +				VF610_PAD_PTD1__UART2_RX		0x21a1
> +				VF610_PAD_PTD2__UART2_RTS		0x21a2
> +				VF610_PAD_PTD3__UART2_CTS		0x21a1
> +			>;
> +		};
> +	};
> +};
> +
> +&esdhc1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_esdhc1>;
> +	bus-width = <4>;
> +	status = "okay";
> +};
> +
> +&fec1 {
> +	phy-mode = "rmii";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_fec1>;
> +	status = "okay";
> +};
> +
> +&L2 {
> +	arm,data-latency = <2 1 2>;
> +	arm,tag-latency = <3 2 3>;
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart0>;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +&uart2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart2>;
> +	status = "okay";
> +};
> -- 
> 1.9.1
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html