From: Jean-Francois Moine <moinejf@free.fr>
To: Mark Brown <broonie@kernel.org>,
Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
Takashi Iwai <tiwai@suse.de>,
Andrew Jackson <Andrew.Jackson@arm.com>,
Jyri Sarha <jsarha@ti.com>, Dave Airlie <airlied@gmail.com>
Subject: [PATCH v13 0/3] ASoC: tda998x: add a codec to the HDMI transmitter
Date: Mon, 20 Jul 2015 15:01:10 +0200 [thread overview]
Message-ID: <cover.1437397270.git.moinejf@free.fr> (raw)
This patch series asks for Russell King's patch
http://article.gmane.org/gmane.linux.ports.arm.kernel/411574
drm/edid: add function to help find SADs
to be applayed.
v13:
- rebase on 4.2.0-rc3
- remove Russell's patches
v12:
- use Russell King's DRM ELD helper (Mark Brown)
v11:
- reduce the patch series to adding the tda998x codec only
v10:
- add the generic dt-card
- define the audio ports from a DT graph of ports (Russell King)
- reuse HDMI constants (Andrew Jackson - Jyri Sarha)
- alloc rate_constraints in codec (Jyri Sarha)
- fix bad number of channels (Jyri Sarha)
- correct codec generation from config (Russell King - Jyri Sarha)
- no module init/exit (Russell King)
v9:
- back to a TDA998x specific CODEC
- more comments
- change magic values to constants
v8:
- change some comments about the patches
v7:
- remove the change of the K predivider (Jyri Sarha)
- add S24_3LE and S32_LE as possible audio formats (Jyri Sarha)
- don't move the struct priv2 definition and use the
slave encoder private data as the device private data
(Russell King)
- remove the useless request_module (Russell King/Mark Brown)
- don't lock the HDMI module (Russell King)
- use platform_device_unregister to remove the codec
(Russell King)
v6:
- extend the HDMI CODEC instead of using a specific CODEC
v5:
- use the TDA998x private data instead of a specific area
for the CODEC interface
- the CODEC is TDA998x specific (Mark Brown)
v4:
- remove all the TDA998x specific stuff from the CODEC
- move the EDID scan from the CODEC to the TDA998x
- move the CODEC to sound/soc (Mark Brown)
- update the audio_sample_rate from the EDID (Andrew Jackson)
v3: fix bad rate (Andrew Jackson)
v2: check double stream start (Mark Brown)
Jean-Francois Moine (3):
drm/i2c: tda998x: Add support of a DT graph of ports
drm/i2c: tda998x: Change drvdata for audio extension
ASoC: tda998x: add a codec to the HDMI transmitter
.../devicetree/bindings/drm/i2c/tda998x.txt | 51 ++++++
drivers/gpu/drm/i2c/tda998x_drv.c | 178 +++++++++++++++++++--
include/sound/tda998x.h | 23 +++
sound/soc/codecs/Kconfig | 6 +
sound/soc/codecs/Makefile | 2 +
sound/soc/codecs/tda998x.c | 132 +++++++++++++++
6 files changed, 381 insertions(+), 11 deletions(-)
create mode 100644 include/sound/tda998x.h
create mode 100644 sound/soc/codecs/tda998x.c
--
2.1.4
next reply other threads:[~2015-07-20 13:01 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-20 13:01 Jean-Francois Moine [this message]
[not found] ` <cover.1437397270.git.moinejf-GANU6spQydw@public.gmane.org>
2015-05-08 8:18 ` [PATCH v13 1/3] drm/i2c: tda998x: Add support of a DT graph of ports Jean-Francois Moine
2015-05-08 8:23 ` [PATCH v13 2/3] drm/i2c: tda998x: Change drvdata for audio extension Jean-Francois Moine
2015-05-08 8:41 ` [PATCH v13 3/3] ASoC: tda998x: add a codec to the HDMI transmitter Jean-Francois Moine
[not found] ` <e036c88aa945e72b40ec965c9358dacf564e79f2.1437397272.git.moinejf-GANU6spQydw@public.gmane.org>
2015-07-20 18:06 ` Mark Brown
[not found] ` <20150720180606.GL11162-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2015-07-28 10:19 ` Jean-Francois Moine
2015-07-28 10:24 ` Mark Brown
2015-07-28 13:23 ` Jean-Francois Moine
2015-07-28 13:53 ` Russell King - ARM Linux
2015-07-28 13:59 ` Takashi Iwai
[not found] ` <s5hio94tmb2.wl-tiwai-l3A5Bk7waGM@public.gmane.org>
2015-07-28 14:18 ` Russell King - ARM Linux
[not found] ` <20150728135358.GK7557-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2015-07-28 14:39 ` Jean-Francois Moine
2015-07-28 15:06 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1437397270.git.moinejf@free.fr \
--to=moinejf@free.fr \
--cc=Andrew.Jackson@arm.com \
--cc=airlied@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jsarha@ti.com \
--cc=linux@arm.linux.org.uk \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).