From mboxrd@z Thu Jan 1 00:00:00 1970 From: Cyrille Pitchen Subject: [PATCH v7 0/2] mfd: flexcom: add a driver for Flexcom Date: Thu, 23 Jul 2015 18:42:54 +0200 Message-ID: Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: nicolas.ferre@atmel.com, boris.brezillon@free-electrons.com, alexandre.belloni@free-electrons.com, sameo@linux.intel.com, lee.jones@linaro.org Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, pawel.moll@arm.com, ijc+devicetree@hellion.org.uk, linux-kernel@vger.kernel.org, robh+dt@kernel.org, galak@codeaurora.org, Cyrille Pitchen , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org ChangeLog v7: - read the operating mode from the very first u32 of the reg property from the first available child node (should be unique). - update the DT bindings documentation accordingly. v6: - select the operating mode according to the "compatible" DT property of the first available child node (should be unique). - remove the "atmel,flexcom-mode" DT property so the need of a header file defining macros for the possible values of this deprecated property. v5: - create a header file containing macros used by DT bindings - use numeric constants instead of strings to select the Flexcom mode - change the license to "GPL v2" - update the DT binding documentation to make it more readable and add references to USART, SPI and I2C DT binding documentations. remove the useless label in the Example section. - change the register prefix from FX_ to FLEX_ to match the Flexcom programmer datasheet. - rename some variables to make them more understandable. v4: - check clk_prepare_enable() return code in atmel_flexcom_probe() - add a commit message to the DT binding patch v3: - remove MODULE_ALIAS() - add Acked-by from Boris Brezillon and Alexandre Belloni v2: - enhance the documentation of DT bindings and change the way the "ranges" property is used. - replace __raw_readl() and __raw_writel() by readl() and writel(). - change the module license to "GPL" for v2 or later - print the selected flexcom mode after the hardware version v1: This series of patches a support to the Atmel Flexcom, a wrapper which integrates an USART, a SPI controller and a TWI controller. Only one peripheral can be used at a time. The active function is selected though the Flexcom Mode Register. Cyrille Pitchen (2): mfd: devicetree: add bindings for Atmel Flexcom mfd: atmel-flexcom: add a driver for Atmel Flexible Serial Communication Unit .../devicetree/bindings/mfd/atmel-flexcom.txt | 68 +++++++++++++ drivers/mfd/Kconfig | 11 ++ drivers/mfd/Makefile | 1 + drivers/mfd/atmel-flexcom.c | 113 +++++++++++++++++++++ 4 files changed, 193 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt create mode 100644 drivers/mfd/atmel-flexcom.c -- 1.8.2.2