[PATCH 0/5] arm: zynq: Adding new Xilinx boards

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 0/5] arm: zynq: Adding new Xilinx boards
@ 2018-01-17 14:41 Michal Simek
  2018-01-17 14:41 ` [PATCH 1/5] arm: zynq: Add Xilinx cc108 board Michal Simek
                   ` (4 more replies)
  0 siblings, 5 replies; 7+ messages in thread
From: Michal Simek @ 2018-01-17 14:41 UTC (permalink / raw)
  To: devicetree
  Cc: monstr, Steffen Trumtrar, linux-kernel, Peter Crosthwaite,
	Rob Herring, Rob Herring, Mark Rutland, Josh Cartwright,
	Russell King, linux-arm-kernel

Hi,

this patchset is adding 5 new dts files which target cc108 and zc770
boards.
Please let me know if you see any issue with them.

Thakns,
Michal


Michal Simek (5):
  arm: zynq: Add Xilinx cc108 board
  arm: zynq: Add support for Xilinx zc770 xm010 dc1 board
  arm: zynq: Add support for Xilinx zc770 xm011 dc2 board
  arm: zynq: Add support for Xilinx zc770 xm012 dc3 board
  arm: zynq: Add support for Xilinx zc770 xm013 dc4 board

 arch/arm/boot/dts/Makefile             |  5 ++
 arch/arm/boot/dts/zynq-cc108.dts       | 75 +++++++++++++++++++++++++++
 arch/arm/boot/dts/zynq-zc770-xm010.dts | 92 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/zynq-zc770-xm011.dts | 64 +++++++++++++++++++++++
 arch/arm/boot/dts/zynq-zc770-xm012.dts | 64 +++++++++++++++++++++++
 arch/arm/boot/dts/zynq-zc770-xm013.dts | 78 ++++++++++++++++++++++++++++
 6 files changed, 378 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-cc108.dts
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm011.dts
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm012.dts
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm013.dts

-- 
1.9.1

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 1/5] arm: zynq: Add Xilinx cc108 board
  2018-01-17 14:41 [PATCH 0/5] arm: zynq: Adding new Xilinx boards Michal Simek
@ 2018-01-17 14:41 ` Michal Simek
  2018-01-17 14:41 ` [PATCH 2/5] arm: zynq: Add support for Xilinx zc770 xm010 dc1 board Michal Simek
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 7+ messages in thread
From: Michal Simek @ 2018-01-17 14:41 UTC (permalink / raw)
  To: devicetree
  Cc: Mark Rutland, Josh Cartwright, Peter Crosthwaite, monstr,
	linux-kernel, Rob Herring, Rob Herring, Russell King,
	Steffen Trumtrar, linux-arm-kernel

The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs
and sd. But board is not supporting booting from sd card.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/boot/dts/Makefile       |  1 +
 arch/arm/boot/dts/zynq-cc108.dts | 75 ++++++++++++++++++++++++++++++++++++++++
 2 files changed, 76 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-cc108.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d0381e9caf21..679cd258bc1f 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1036,6 +1036,7 @@ dtb-$(CONFIG_ARCH_VT8500) += \
 	wm8750-apc8750.dtb \
 	wm8850-w70v2.dtb
 dtb-$(CONFIG_ARCH_ZYNQ) += \
+	zynq-cc108.dtb \
 	zynq-microzed.dtb \
 	zynq-parallella.dtb \
 	zynq-zc702.dtb \
diff --git a/arch/arm/boot/dts/zynq-cc108.dts b/arch/arm/boot/dts/zynq-cc108.dts
new file mode 100644
index 000000000000..1a0f631c1d8d
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-cc108.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx CC108 board DTS
+ *
+ * (C) Copyright 2007-2018 Xilinx, Inc.
+ * (C) Copyright 2007-2013 Michal Simek
+ * (C) Copyright 2007-2012 PetaLogix Qld Pty Ltd
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-cc108", "xlnx,zynq-7000";
+	model = "Xilinx Zynq";
+
+	aliases {
+		ethernet0 = &gem0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@1 {
+		reg = <1>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&sdhci1 {
+	status = "okay";
+	broken-cd ;
+	wp-inverted ;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH 2/5] arm: zynq: Add support for Xilinx zc770 xm010 dc1 board
  2018-01-17 14:41 [PATCH 0/5] arm: zynq: Adding new Xilinx boards Michal Simek
  2018-01-17 14:41 ` [PATCH 1/5] arm: zynq: Add Xilinx cc108 board Michal Simek
@ 2018-01-17 14:41 ` Michal Simek
  2018-01-17 14:41 ` [PATCH 3/5] arm: zynq: Add support for Xilinx zc770 xm011 dc2 board Michal Simek
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 7+ messages in thread
From: Michal Simek @ 2018-01-17 14:41 UTC (permalink / raw)
  To: devicetree
  Cc: monstr, Steffen Trumtrar, linux-kernel, Peter Crosthwaite,
	Rob Herring, Rob Herring, Mark Rutland, Josh Cartwright,
	Russell King, linux-arm-kernel

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/boot/dts/Makefile             |  1 +
 arch/arm/boot/dts/zynq-zc770-xm010.dts | 92 ++++++++++++++++++++++++++++++++++
 2 files changed, 93 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm010.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 679cd258bc1f..fa62546ebfb3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1041,6 +1041,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-parallella.dtb \
 	zynq-zc702.dtb \
 	zynq-zc706.dtb \
+	zynq-zc770-xm010.dtb \
 	zynq-zed.dtb \
 	zynq-zybo.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
diff --git a/arch/arm/boot/dts/zynq-zc770-xm010.dts b/arch/arm/boot/dts/zynq-zc770-xm010.dts
new file mode 100644
index 000000000000..b1cfb4ede434
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm010.dts
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM010 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-zc770-xm010", "xlnx,zynq-7000";
+	model = "Xilinx Zynq";
+
+	aliases {
+		ethernet0 = &gem0;
+		i2c0 = &i2c0;
+		serial0 = &uart1;
+		spi1 = &spi1;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy0: phy0 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&gem0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+
+};
+
+&sdhci0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	flash@0 {
+		compatible = "sst25wf080", "jedec,spi-nor";
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@test {
+			label = "spi-flash";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy0>;
+};
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH 3/5] arm: zynq: Add support for Xilinx zc770 xm011 dc2 board
  2018-01-17 14:41 [PATCH 0/5] arm: zynq: Adding new Xilinx boards Michal Simek
  2018-01-17 14:41 ` [PATCH 1/5] arm: zynq: Add Xilinx cc108 board Michal Simek
  2018-01-17 14:41 ` [PATCH 2/5] arm: zynq: Add support for Xilinx zc770 xm010 dc1 board Michal Simek
@ 2018-01-17 14:41 ` Michal Simek
       [not found] ` <cover.1516200065.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
  2018-01-17 14:41 ` [PATCH 5/5] arm: zynq: Add support for Xilinx zc770 xm013 dc4 board Michal Simek
  4 siblings, 0 replies; 7+ messages in thread
From: Michal Simek @ 2018-01-17 14:41 UTC (permalink / raw)
  To: devicetree
  Cc: monstr, Steffen Trumtrar, linux-kernel, Peter Crosthwaite,
	Rob Herring, Rob Herring, Mark Rutland, Josh Cartwright,
	Russell King, linux-arm-kernel

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, i2c, nand uart, spi and usb.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/boot/dts/Makefile             |  1 +
 arch/arm/boot/dts/zynq-zc770-xm011.dts | 64 ++++++++++++++++++++++++++++++++++
 2 files changed, 65 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm011.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index fa62546ebfb3..7ed36eef2de0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1042,6 +1042,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zc702.dtb \
 	zynq-zc706.dtb \
 	zynq-zc770-xm010.dtb \
+	zynq-zc770-xm011.dtb \
 	zynq-zed.dtb \
 	zynq-zybo.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
diff --git a/arch/arm/boot/dts/zynq-zc770-xm011.dts b/arch/arm/boot/dts/zynq-zc770-xm011.dts
new file mode 100644
index 000000000000..b78883cee96a
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm011.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-zc770-xm011", "xlnx,zynq-7000";
+	model = "Xilinx Zynq";
+
+	aliases {
+		i2c0 = &i2c1;
+		serial0 = &uart1;
+		spi0 = &spi0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+
+	usb_phy1: phy1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+	usb-phy = <&usb_phy1>;
+};
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread

[parent not found: <cover.1516200065.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>]

* [PATCH 4/5] arm: zynq: Add support for Xilinx zc770 xm012 dc3 board
       [not found] ` <cover.1516200065.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
@ 2018-01-17 14:41   ` Michal Simek
  0 siblings, 0 replies; 7+ messages in thread
From: Michal Simek @ 2018-01-17 14:41 UTC (permalink / raw)
  To: devicetree-u79uwXL29TY76Z2rM5mHXA
  Cc: monstr-pSz03upnqPeHXe+LvDLADg, Steffen Trumtrar,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA, Peter Crosthwaite,
	Rob Herring, Rob Herring, Mark Rutland, Josh Cartwright,
	Russell King, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, 2x i2c, nor flash, spi and uart.

Signed-off-by: Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
---

 arch/arm/boot/dts/Makefile             |  1 +
 arch/arm/boot/dts/zynq-zc770-xm012.dts | 64 ++++++++++++++++++++++++++++++++++
 2 files changed, 65 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm012.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 7ed36eef2de0..6bd4b9a29511 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1043,6 +1043,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zc706.dtb \
 	zynq-zc770-xm010.dtb \
 	zynq-zc770-xm011.dtb \
+	zynq-zc770-xm012.dtb \
 	zynq-zed.dtb \
 	zynq-zybo.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
diff --git a/arch/arm/boot/dts/zynq-zc770-xm012.dts b/arch/arm/boot/dts/zynq-zc770-xm012.dts
new file mode 100644
index 000000000000..c3169d63600d
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm012.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM012 board DTS
+ *
+ * Copyright (C) 2013-2018 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-zc770-xm012", "xlnx,zynq-7000";
+	model = "Xilinx Zynq";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		serial0 = &uart1;
+		spi0 = &spi1;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom0: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom1: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+};
+
+&uart1 {
+	status = "okay";
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH 5/5]  arm: zynq: Add support for Xilinx zc770 xm013 dc4 board
  2018-01-17 14:41 [PATCH 0/5] arm: zynq: Adding new Xilinx boards Michal Simek
                   ` (3 preceding siblings ...)
       [not found] ` <cover.1516200065.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
@ 2018-01-17 14:41 ` Michal Simek
       [not found]   ` <3be3cd00b710827da46817693748eb6bcee00f82.1516200065.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
  4 siblings, 1 reply; 7+ messages in thread
From: Michal Simek @ 2018-01-17 14:41 UTC (permalink / raw)
  To: devicetree
  Cc: linux-kernel, Rob Herring, Mark Rutland, Russell King,
	linux-arm-kernel

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, ethernet, i2c, qspi, spi and uart.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

 arch/arm/boot/dts/Makefile             |  1 +
 arch/arm/boot/dts/zynq-zc770-xm013.dts | 78 ++++++++++++++++++++++++++++++++++
 2 files changed, 79 insertions(+)
 create mode 100644 arch/arm/boot/dts/zynq-zc770-xm013.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 6bd4b9a29511..44be37afa544 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1044,6 +1044,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
 	zynq-zc770-xm010.dtb \
 	zynq-zc770-xm011.dtb \
 	zynq-zc770-xm012.dtb \
+	zynq-zc770-xm013.dtb \
 	zynq-zed.dtb \
 	zynq-zybo.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
new file mode 100644
index 000000000000..ad3e1d108a9b
--- /dev/null
+++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Xilinx ZC770 XM013 board DTS
+ *
+ * Copyright (C) 2013 Xilinx, Inc.
+ */
+/dts-v1/;
+#include "zynq-7000.dtsi"
+
+/ {
+	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
+	model = "Xilinx Zynq";
+
+	aliases {
+		ethernet0 = &gem1;
+		i2c0 = &i2c1;
+		serial0 = &uart0;
+		spi1 = &spi0;
+	};
+
+	chosen {
+		bootargs = "";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&gem1 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethernet_phy>;
+
+	ethernet_phy: ethernet-phy@7 {
+		reg = <7>;
+		device_type = "ethernet-phy";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	si570: clock-generator@55 {
+		#clock-cells = <0>;
+		compatible = "silabs,si570";
+		temperature-stability = <50>;
+		reg = <0x55>;
+		factory-fout = <156250000>;
+		clock-frequency = <148500000>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	num-cs = <4>;
+	is-decoded-cs = <0>;
+	eeprom: at25@0 {
+		at25,byte-len = <8192>;
+		at25,addr-mode = <2>;
+		at25,page-size = <32>;
+
+		compatible = "atmel,at25";
+		reg = <2>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
-- 
1.9.1

^ permalink raw reply related	[flat|nested] 7+ messages in thread

[parent not found: <3be3cd00b710827da46817693748eb6bcee00f82.1516200065.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>]

* Re: [PATCH 5/5] arm: zynq: Add support for Xilinx zc770 xm013 dc4 board
       [not found]   ` <3be3cd00b710827da46817693748eb6bcee00f82.1516200065.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
@ 2018-02-09  8:51     ` Michal Simek
  0 siblings, 0 replies; 7+ messages in thread
From: Michal Simek @ 2018-02-09  8:51 UTC (permalink / raw)
  To: Michal Simek, devicetree-u79uwXL29TY76Z2rM5mHXA, Rob Herring
  Cc: linux-kernel-u79uwXL29TY76Z2rM5mHXA, Mark Rutland, Russell King,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r


[-- Attachment #1.1: Type: text/plain, Size: 2916 bytes --]

On 17.1.2018 15:41, Michal Simek wrote:
> zc770 is based board which is extended by FMC/DC cards for SoC
> validation. FMCs/DCs are supposed to cover all SoC configurations.
> FMC/DC contains can, ethernet, i2c, qspi, spi and uart.
> 
> Signed-off-by: Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
> ---
> 
>  arch/arm/boot/dts/Makefile             |  1 +
>  arch/arm/boot/dts/zynq-zc770-xm013.dts | 78 ++++++++++++++++++++++++++++++++++
>  2 files changed, 79 insertions(+)
>  create mode 100644 arch/arm/boot/dts/zynq-zc770-xm013.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 6bd4b9a29511..44be37afa544 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1044,6 +1044,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
>  	zynq-zc770-xm010.dtb \
>  	zynq-zc770-xm011.dtb \
>  	zynq-zc770-xm012.dtb \
> +	zynq-zc770-xm013.dtb \
>  	zynq-zed.dtb \
>  	zynq-zybo.dtb
>  dtb-$(CONFIG_MACH_ARMADA_370) += \
> diff --git a/arch/arm/boot/dts/zynq-zc770-xm013.dts b/arch/arm/boot/dts/zynq-zc770-xm013.dts
> new file mode 100644
> index 000000000000..ad3e1d108a9b
> --- /dev/null
> +++ b/arch/arm/boot/dts/zynq-zc770-xm013.dts
> @@ -0,0 +1,78 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Xilinx ZC770 XM013 board DTS
> + *
> + * Copyright (C) 2013 Xilinx, Inc.
> + */
> +/dts-v1/;
> +#include "zynq-7000.dtsi"
> +
> +/ {
> +	compatible = "xlnx,zynq-zc770-xm013", "xlnx,zynq-7000";
> +	model = "Xilinx Zynq";
> +
> +	aliases {
> +		ethernet0 = &gem1;
> +		i2c0 = &i2c1;
> +		serial0 = &uart0;
> +		spi1 = &spi0;
> +	};
> +
> +	chosen {
> +		bootargs = "";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory@0 {
> +		device_type = "memory";
> +		reg = <0x0 0x40000000>;
> +	};
> +};
> +
> +&can1 {
> +	status = "okay";
> +};
> +
> +&gem1 {
> +	status = "okay";
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&ethernet_phy>;
> +
> +	ethernet_phy: ethernet-phy@7 {
> +		reg = <7>;
> +		device_type = "ethernet-phy";
> +	};
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	si570: clock-generator@55 {
> +		#clock-cells = <0>;
> +		compatible = "silabs,si570";
> +		temperature-stability = <50>;
> +		reg = <0x55>;
> +		factory-fout = <156250000>;
> +		clock-frequency = <148500000>;
> +	};
> +};
> +
> +&spi0 {
> +	status = "okay";
> +	num-cs = <4>;
> +	is-decoded-cs = <0>;
> +	eeprom: at25@0 {

This should be probably eeprom: eeprom@25.

Rob: Do you see any other issue with this series? Or can I apply?

Thanks,
Michal

-- 
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP SoCs



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2018-02-09  8:51 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-01-17 14:41 [PATCH 0/5] arm: zynq: Adding new Xilinx boards Michal Simek
2018-01-17 14:41 ` [PATCH 1/5] arm: zynq: Add Xilinx cc108 board Michal Simek
2018-01-17 14:41 ` [PATCH 2/5] arm: zynq: Add support for Xilinx zc770 xm010 dc1 board Michal Simek
2018-01-17 14:41 ` [PATCH 3/5] arm: zynq: Add support for Xilinx zc770 xm011 dc2 board Michal Simek
     [not found] ` <cover.1516200065.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
2018-01-17 14:41   ` [PATCH 4/5] arm: zynq: Add support for Xilinx zc770 xm012 dc3 board Michal Simek
2018-01-17 14:41 ` [PATCH 5/5] arm: zynq: Add support for Xilinx zc770 xm013 dc4 board Michal Simek
     [not found]   ` <3be3cd00b710827da46817693748eb6bcee00f82.1516200065.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
2018-02-09  8:51     ` Michal Simek

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).