From: Michal Simek <michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: monstr-pSz03upnqPeHXe+LvDLADg@public.gmane.org,
Masahiro Yamada
<yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
Will Deacon <will.deacon-5wv7dgnIgG8@public.gmane.org>,
Catalin Marinas <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 0/7] arm64: zynqmp: Add support for existing Xilinx ZynqMP based boards
Date: Fri, 19 Jan 2018 13:55:39 +0100 [thread overview]
Message-ID: <cover.1516366474.git.michal.simek@xilinx.com> (raw)
Hi,
This patchset is adding all current existing Xilinx ZynqMP boards.
zcu* boards are customer boards. zc1* are mainly Xilinx internal boards
but some of them have been shared with customers. zc1751 is unique in
this set because it is based board with FMC card for silicon/hard IP
validation.
All boards are using the same default clock configuration till clock
driver is merged to mainline. Some boards also contain other components
which are not described because mainline driver haven't been merged yet.
For example nand, qspi, pinctrl and phy.
Please let me know if you see any issue with these boards.
Thanks,
Michal
Michal Simek (7):
arm64: zynqmp: Add support for Xilinx zcu100-revC
arm64: zynqmp: Add support for Xilinx zcu102
arm64: zynqmp: Add support for Xilinx zcu104-revA
arm64: zynqmp: Add support for Xilinx zcu106-revA
arm64: zynqmp: Add support for Xilinx zcu111-revA
arm64: zynqmp: Add support for Xilinx zc12XX boards
arm64: zynqmp: Add support for Xilinx zc1751
arch/arm64/boot/dts/xilinx/Makefile | 15 +
arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi | 213 ++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts | 54 ++
arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts | 42 ++
arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts | 42 ++
.../boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 133 +++++
.../boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 170 +++++++
.../boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts | 153 ++++++
.../boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 181 +++++++
.../boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts | 126 +++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 298 +++++++++++
.../arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 36 ++
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 556 +++++++++++++++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts | 42 ++
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 197 ++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 530 ++++++++++++++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 446 +++++++++++++++++
17 files changed, 3234 insertions(+)
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2018-01-19 12:55 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-19 12:55 Michal Simek [this message]
2018-01-19 12:55 ` [PATCH 1/7] arm64: zynqmp: Add support for Xilinx zcu100-revC Michal Simek
[not found] ` <7dd5614c878adb30e38caf4002921c0ca995329c.1516366474.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
2018-02-01 16:41 ` Rob Herring
[not found] ` <CAL_JsqKdEdyQP8maUmM39fvsAUcrvf6=_g21aRiaXqyv-ZogBw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-01 17:33 ` Michal Simek
2018-01-19 12:55 ` [PATCH 2/7] arm64: zynqmp: Add support for Xilinx zcu102 Michal Simek
[not found] ` <63760114db981535bf22c25be2daf0049f1b9709.1516366474.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
2018-02-01 16:46 ` Rob Herring
[not found] ` <CAL_Jsq+N-_8s0d=jD=fMD4y7e76M=tT0kt2vsH0kbOqs-eQ95w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-01 17:26 ` Michal Simek
2018-02-06 14:01 ` Michal Simek
[not found] ` <cover.1516366474.git.michal.simek-gjFFaj9aHVfQT0dZR+AlfA@public.gmane.org>
2018-01-19 12:55 ` [PATCH 3/7] arm64: zynqmp: Add support for Xilinx zcu104-revA Michal Simek
2018-01-19 12:55 ` [PATCH 4/7] arm64: zynqmp: Add support for Xilinx zcu106-revA Michal Simek
2018-01-19 12:55 ` [PATCH 5/7] arm64: zynqmp: Add support for Xilinx zcu111-revA Michal Simek
2018-01-19 12:55 ` [PATCH 6/7] arm64: zynqmp: Add support for Xilinx zc12XX boards Michal Simek
2018-01-19 12:55 ` [PATCH 7/7] arm64: zynqmp: Add support for Xilinx zc1751 Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1516366474.git.michal.simek@xilinx.com \
--to=michal.simek-gjffaj9ahvfqt0dzr+alfa@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=monstr-pSz03upnqPeHXe+LvDLADg@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
--cc=yamada.masahiro-uWyLwvC0a2jby3iVrkZq2A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).