From: Michal Simek <michal.simek@xilinx.com>
To: devicetree@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
monstr@monstr.eu, Arnd Bergmann <arnd@arndb.de>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
linux-kernel@vger.kernel.org,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Rob Herring <robh+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/8] arm64: zynqmp: Add support for existing Xilinx ZynqMP based boards
Date: Fri, 23 Feb 2018 15:40:22 +0100 [thread overview]
Message-ID: <cover.1519396753.git.michal.simek@xilinx.com> (raw)
Hi,
This patchset is adding all current existing Xilinx ZynqMP boards.
zcu* boards are customer boards. zc1* are mainly Xilinx internal boards
but some of them have been shared with customers. zc1751 is unique in
this set because it is based board with FMC card for silicon/hard IP
validation.
All boards are using the same default clock configuration till clock
driver is merged to mainline. Some boards also contain other components
which are not described because mainline driver haven't been merged yet.
For example nand, qspi, pinctrl and phy.
Please let me know if you see any issue with these boards.
Thanks,
Michal
Changes in v2:
- New patch in this series
- Use i2c-mux instead of i2cswitch
- Remove i2c mw u-boot commands
- Use 96boards labels for i2cs and spis
- Fix pmic and wifi node
- Record compatible string to xilinx.txt
- Remove Nathalie's email (she left Xilinx already)
- Remove i2c mw u-boot commands
- Use i2c-mux instead of i2cswitch
- Use clock generator without numbers.
- Use dash in node name zcu102 rev1.0
- Record compatible string to xilinx.txt
- Remove i2c mw u-boot commands
- Record compatible string to xilinx.txt
- Remove i2c mw u-boot commands
- Use i2c-mux instead of i2cswitch
- Use clock generator without numbers
- Record compatible string to xilinx.txt
- Remove i2c mw u-boot commands
- Use i2c-mux instead of i2cswitch
- Use clock generator without numbers.
- Record compatible string to xilinx.txt
- Record compatible string to xilinx.txt
- Record compatible string to xilinx.txt
Michal Simek (8):
dt-bindings: xilinx: Add description for ZynqMP
arm64: zynqmp: Add support for Xilinx zcu100-revC
arm64: zynqmp: Add support for Xilinx zcu102
arm64: zynqmp: Add support for Xilinx zcu104-revA
arm64: zynqmp: Add support for Xilinx zcu106-revA
arm64: zynqmp: Add support for Xilinx zcu111-revA
arm64: zynqmp: Add support for Xilinx zc12XX boards
arm64: zynqmp: Add support for Xilinx zc1751
Documentation/devicetree/bindings/arm/xilinx.txt | 42 ++
arch/arm64/boot/dts/xilinx/Makefile | 15 +
arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi | 213 ++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts | 54 ++
arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts | 42 ++
arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts | 42 ++
.../boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts | 133 +++++
.../boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts | 170 +++++++
.../boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts | 153 ++++++
.../boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts | 181 +++++++
.../boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts | 126 +++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts | 292 +++++++++++
.../arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 36 ++
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts | 550 +++++++++++++++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts | 42 ++
arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts | 197 ++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts | 524 ++++++++++++++++++++
arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts | 446 +++++++++++++++++
18 files changed, 3258 insertions(+)
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-clk.dtsi
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
--
1.9.1
next reply other threads:[~2018-02-23 14:40 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-23 14:40 Michal Simek [this message]
2018-02-23 14:40 ` [PATCH v2 1/8] dt-bindings: xilinx: Add description for ZynqMP Michal Simek
2018-03-02 16:36 ` Rob Herring
2018-02-23 14:40 ` [PATCH v2 2/8] arm64: zynqmp: Add support for Xilinx zcu100-revC Michal Simek
2018-03-02 16:40 ` Rob Herring
2018-03-02 18:34 ` Michal Simek
2018-02-23 14:40 ` [PATCH v2 3/8] arm64: zynqmp: Add support for Xilinx zcu102 Michal Simek
2018-03-02 16:48 ` Rob Herring
2018-03-02 18:39 ` Michal Simek
2018-02-23 14:40 ` [PATCH v2 4/8] arm64: zynqmp: Add support for Xilinx zcu104-revA Michal Simek
2018-03-02 18:02 ` Rob Herring
2018-03-02 18:42 ` Michal Simek
2018-02-23 14:40 ` [PATCH v2 5/8] arm64: zynqmp: Add support for Xilinx zcu106-revA Michal Simek
2018-02-23 14:40 ` [PATCH v2 6/8] arm64: zynqmp: Add support for Xilinx zcu111-revA Michal Simek
2018-03-02 18:04 ` Rob Herring
2018-03-02 18:06 ` Rob Herring
2018-02-23 14:40 ` [PATCH v2 7/8] arm64: zynqmp: Add support for Xilinx zc12XX boards Michal Simek
2018-03-02 18:06 ` Rob Herring
2018-02-23 14:40 ` [PATCH v2 8/8] arm64: zynqmp: Add support for Xilinx zc1751 Michal Simek
2018-03-02 18:12 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1519396753.git.michal.simek@xilinx.com \
--to=michal.simek@xilinx.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=monstr@monstr.eu \
--cc=robh+dt@kernel.org \
--cc=will.deacon@arm.com \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).