* [PATCH 0/2] add support for ASM330LHH
@ 2019-02-21 15:20 Lorenzo Bianconi
2019-02-21 15:20 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ASM330LHH Lorenzo Bianconi
2019-02-21 15:20 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings Lorenzo Bianconi
0 siblings, 2 replies; 5+ messages in thread
From: Lorenzo Bianconi @ 2019-02-21 15:20 UTC (permalink / raw)
To: jic23; +Cc: linux-iio, devicetree, mario.tesi, lorenzo.bianconi
Add support for ASM330LHH IMU mems sensor
https://www.st.com/resource/en/datasheet/asm330lhh.pdf
Lorenzo Bianconi (2):
iio: imu: st_lsm6dsx: add support to ASM330LHH
dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings
.../bindings/iio/imu/st_lsm6dsx.txt | 1 +
drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +
.../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 ++--
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 41 ++++++++++++++++++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++
7 files changed, 58 insertions(+), 6 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ASM330LHH
2019-02-21 15:20 [PATCH 0/2] add support for ASM330LHH Lorenzo Bianconi
@ 2019-02-21 15:20 ` Lorenzo Bianconi
2019-03-03 16:11 ` Jonathan Cameron
2019-02-21 15:20 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings Lorenzo Bianconi
1 sibling, 1 reply; 5+ messages in thread
From: Lorenzo Bianconi @ 2019-02-21 15:20 UTC (permalink / raw)
To: jic23; +Cc: linux-iio, devicetree, mario.tesi, lorenzo.bianconi
Add support to STM ASM330LHH 6-axis (acc + gyro) Mems sensor
https://www.st.com/resource/en/datasheet/asm330lhh.pdf
Tested-by: Mario Tesi <mario.tesi@st.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +
.../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 ++--
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 41 ++++++++++++++++++-
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++
6 files changed, 57 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 094fd006b63d..36048bf0455a 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -9,7 +9,7 @@ config IIO_ST_LSM6DSX
help
Say yes here to build support for STMicroelectronics LSM6DSx imu
sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
- ism330dlc, lsm6dso
+ ism330dlc, lsm6dso, asm330lhh
To compile this driver as a module, choose M here: the module
will be called st_lsm6dsx.
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index d1d8d07a0714..de2a0dc39353 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -20,6 +20,7 @@
#define ST_LSM6DSM_DEV_NAME "lsm6dsm"
#define ST_ISM330DLC_DEV_NAME "ism330dlc"
#define ST_LSM6DSO_DEV_NAME "lsm6dso"
+#define ST_ASM330LHH_DEV_NAME "asm330lhh"
enum st_lsm6dsx_hw_id {
ST_LSM6DS3_ID,
@@ -28,6 +29,7 @@ enum st_lsm6dsx_hw_id {
ST_LSM6DSM_ID,
ST_ISM330DLC_ID,
ST_LSM6DSO_ID,
+ ST_ASM330LHH_ID,
ST_LSM6DSX_MAX_ID,
};
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index 2c0d3763405a..8f443bdb5b51 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -13,9 +13,9 @@
* (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
* value of the decimation factor and ODR set for each FIFO data set.
*
- * LSM6DSO: The FIFO buffer can be configured to store data from gyroscope and
- * accelerometer. Each sample is queued with a tag (1B) indicating data source
- * (gyroscope, accelerometer, hw timer).
+ * LSM6DSO/ASM330LHH: The FIFO buffer can be configured to store data
+ * from gyroscope and accelerometer. Each sample is queued with a tag (1B)
+ * indicating data source (gyroscope, accelerometer, hw timer).
*
* FIFO supported modes:
* - BYPASS: FIFO disabled
@@ -506,7 +506,7 @@ st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
}
/**
- * st_lsm6dsx_read_tagged_fifo() - LSM6DSO read FIFO routine
+ * st_lsm6dsx_read_tagged_fifo() - LSM6DSO/ASM330LHH read FIFO routine
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
*
* Read samples from the hw FIFO and push them to IIO buffers.
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 12e29dda9b98..50cab3531b11 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -23,7 +23,7 @@
* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
* - FIFO size: 4KB
*
- * - LSM6DSO
+ * - LSM6DSO/ASM330LHH
* - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416
* - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
* - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
@@ -347,6 +347,45 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.batch_en = BIT(3),
}
},
+ {
+ .wai = 0x6b,
+ .max_fifo_size = 512,
+ .id = {
+ [0] = ST_ASM330LHH_ID,
+ },
+ .batch = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .addr = 0x09,
+ .mask = GENMASK(3, 0),
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .addr = 0x09,
+ .mask = GENMASK(7, 4),
+ },
+ },
+ .fifo_ops = {
+ .read_fifo = st_lsm6dsx_read_tagged_fifo,
+ .fifo_th = {
+ .addr = 0x07,
+ .mask = GENMASK(8, 0),
+ },
+ .fifo_diff = {
+ .addr = 0x3a,
+ .mask = GENMASK(8, 0),
+ },
+ .th_wl = 1,
+ },
+ .ts_settings = {
+ .timer_en = {
+ .addr = 0x19,
+ .mask = BIT(5),
+ },
+ .decimator = {
+ .addr = 0x0a,
+ .mask = GENMASK(7, 6),
+ },
+ },
+ },
};
static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index 448b7bc1e578..00b4b702645a 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -65,6 +65,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
.compatible = "st,lsm6dso",
.data = (void *)ST_LSM6DSO_ID,
},
+ {
+ .compatible = "st,asm330lhh",
+ .data = (void *)ST_ASM330LHH_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
@@ -76,6 +80,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
{ ST_LSM6DSM_DEV_NAME, ST_LSM6DSM_ID },
{ ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
{ ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
+ { ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
{},
};
MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index b1df8a6973e6..836256c2ac7d 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -65,6 +65,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
.compatible = "st,lsm6dso",
.data = (void *)ST_LSM6DSO_ID,
},
+ {
+ .compatible = "st,asm330lhh",
+ .data = (void *)ST_ASM330LHH_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -76,6 +80,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
{ ST_LSM6DSM_DEV_NAME, ST_LSM6DSM_ID },
{ ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
{ ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
+ { ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
{},
};
MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings
2019-02-21 15:20 [PATCH 0/2] add support for ASM330LHH Lorenzo Bianconi
2019-02-21 15:20 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ASM330LHH Lorenzo Bianconi
@ 2019-02-21 15:20 ` Lorenzo Bianconi
2019-03-03 16:12 ` Jonathan Cameron
1 sibling, 1 reply; 5+ messages in thread
From: Lorenzo Bianconi @ 2019-02-21 15:20 UTC (permalink / raw)
To: jic23; +Cc: linux-iio, devicetree, mario.tesi, lorenzo.bianconi
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
---
Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
index 69d53d98d0f0..8f1b09e39c72 100644
--- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
+++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
@@ -8,6 +8,7 @@ Required properties:
"st,lsm6dsm"
"st,ism330dlc"
"st,lsm6dso"
+ "st,asm330lhh"
- reg: i2c address of the sensor / spi cs line
Optional properties:
--
2.20.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ASM330LHH
2019-02-21 15:20 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ASM330LHH Lorenzo Bianconi
@ 2019-03-03 16:11 ` Jonathan Cameron
0 siblings, 0 replies; 5+ messages in thread
From: Jonathan Cameron @ 2019-03-03 16:11 UTC (permalink / raw)
To: Lorenzo Bianconi; +Cc: linux-iio, devicetree, mario.tesi, lorenzo.bianconi
On Thu, 21 Feb 2019 16:20:20 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> Add support to STM ASM330LHH 6-axis (acc + gyro) Mems sensor
> https://www.st.com/resource/en/datasheet/asm330lhh.pdf
>
> Tested-by: Mario Tesi <mario.tesi@st.com>
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to play with it.
Thanks,
Jonathan
> ---
> drivers/iio/imu/st_lsm6dsx/Kconfig | 2 +-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +
> .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c | 8 ++--
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c | 41 ++++++++++++++++++-
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c | 5 +++
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c | 5 +++
> 6 files changed, 57 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
> index 094fd006b63d..36048bf0455a 100644
> --- a/drivers/iio/imu/st_lsm6dsx/Kconfig
> +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
> @@ -9,7 +9,7 @@ config IIO_ST_LSM6DSX
> help
> Say yes here to build support for STMicroelectronics LSM6DSx imu
> sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
> - ism330dlc, lsm6dso
> + ism330dlc, lsm6dso, asm330lhh
>
> To compile this driver as a module, choose M here: the module
> will be called st_lsm6dsx.
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> index d1d8d07a0714..de2a0dc39353 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
> @@ -20,6 +20,7 @@
> #define ST_LSM6DSM_DEV_NAME "lsm6dsm"
> #define ST_ISM330DLC_DEV_NAME "ism330dlc"
> #define ST_LSM6DSO_DEV_NAME "lsm6dso"
> +#define ST_ASM330LHH_DEV_NAME "asm330lhh"
>
> enum st_lsm6dsx_hw_id {
> ST_LSM6DS3_ID,
> @@ -28,6 +29,7 @@ enum st_lsm6dsx_hw_id {
> ST_LSM6DSM_ID,
> ST_ISM330DLC_ID,
> ST_LSM6DSO_ID,
> + ST_ASM330LHH_ID,
> ST_LSM6DSX_MAX_ID,
> };
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> index 2c0d3763405a..8f443bdb5b51 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
> @@ -13,9 +13,9 @@
> * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
> * value of the decimation factor and ODR set for each FIFO data set.
> *
> - * LSM6DSO: The FIFO buffer can be configured to store data from gyroscope and
> - * accelerometer. Each sample is queued with a tag (1B) indicating data source
> - * (gyroscope, accelerometer, hw timer).
> + * LSM6DSO/ASM330LHH: The FIFO buffer can be configured to store data
> + * from gyroscope and accelerometer. Each sample is queued with a tag (1B)
> + * indicating data source (gyroscope, accelerometer, hw timer).
> *
> * FIFO supported modes:
> * - BYPASS: FIFO disabled
> @@ -506,7 +506,7 @@ st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
> }
>
> /**
> - * st_lsm6dsx_read_tagged_fifo() - LSM6DSO read FIFO routine
> + * st_lsm6dsx_read_tagged_fifo() - LSM6DSO/ASM330LHH read FIFO routine
> * @hw: Pointer to instance of struct st_lsm6dsx_hw.
> *
> * Read samples from the hw FIFO and push them to IIO buffers.
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> index 12e29dda9b98..50cab3531b11 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
> @@ -23,7 +23,7 @@
> * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
> * - FIFO size: 4KB
> *
> - * - LSM6DSO
> + * - LSM6DSO/ASM330LHH
> * - Accelerometer/Gyroscope supported ODR [Hz]: 13, 26, 52, 104, 208, 416
> * - Accelerometer supported full-scale [g]: +-2/+-4/+-8/+-16
> * - Gyroscope supported full-scale [dps]: +-125/+-245/+-500/+-1000/+-2000
> @@ -347,6 +347,45 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
> .batch_en = BIT(3),
> }
> },
> + {
> + .wai = 0x6b,
> + .max_fifo_size = 512,
> + .id = {
> + [0] = ST_ASM330LHH_ID,
> + },
> + .batch = {
> + [ST_LSM6DSX_ID_ACC] = {
> + .addr = 0x09,
> + .mask = GENMASK(3, 0),
> + },
> + [ST_LSM6DSX_ID_GYRO] = {
> + .addr = 0x09,
> + .mask = GENMASK(7, 4),
> + },
> + },
> + .fifo_ops = {
> + .read_fifo = st_lsm6dsx_read_tagged_fifo,
> + .fifo_th = {
> + .addr = 0x07,
> + .mask = GENMASK(8, 0),
> + },
> + .fifo_diff = {
> + .addr = 0x3a,
> + .mask = GENMASK(8, 0),
> + },
> + .th_wl = 1,
> + },
> + .ts_settings = {
> + .timer_en = {
> + .addr = 0x19,
> + .mask = BIT(5),
> + },
> + .decimator = {
> + .addr = 0x0a,
> + .mask = GENMASK(7, 6),
> + },
> + },
> + },
> };
>
> static const struct iio_chan_spec st_lsm6dsx_acc_channels[] = {
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> index 448b7bc1e578..00b4b702645a 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
> @@ -65,6 +65,10 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
> .compatible = "st,lsm6dso",
> .data = (void *)ST_LSM6DSO_ID,
> },
> + {
> + .compatible = "st,asm330lhh",
> + .data = (void *)ST_ASM330LHH_ID,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
> @@ -76,6 +80,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
> { ST_LSM6DSM_DEV_NAME, ST_LSM6DSM_ID },
> { ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
> { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
> + { ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
> {},
> };
> MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
> index b1df8a6973e6..836256c2ac7d 100644
> --- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
> @@ -65,6 +65,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
> .compatible = "st,lsm6dso",
> .data = (void *)ST_LSM6DSO_ID,
> },
> + {
> + .compatible = "st,asm330lhh",
> + .data = (void *)ST_ASM330LHH_ID,
> + },
> {},
> };
> MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
> @@ -76,6 +80,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
> { ST_LSM6DSM_DEV_NAME, ST_LSM6DSM_ID },
> { ST_ISM330DLC_DEV_NAME, ST_ISM330DLC_ID },
> { ST_LSM6DSO_DEV_NAME, ST_LSM6DSO_ID },
> + { ST_ASM330LHH_DEV_NAME, ST_ASM330LHH_ID },
> {},
> };
> MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings
2019-02-21 15:20 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings Lorenzo Bianconi
@ 2019-03-03 16:12 ` Jonathan Cameron
0 siblings, 0 replies; 5+ messages in thread
From: Jonathan Cameron @ 2019-03-03 16:12 UTC (permalink / raw)
To: Lorenzo Bianconi; +Cc: linux-iio, devicetree, mario.tesi, lorenzo.bianconi
On Thu, 21 Feb 2019 16:20:21 +0100
Lorenzo Bianconi <lorenzo@kernel.org> wrote:
> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Applied. Thanks,
Jonathan
> ---
> Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> index 69d53d98d0f0..8f1b09e39c72 100644
> --- a/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> +++ b/Documentation/devicetree/bindings/iio/imu/st_lsm6dsx.txt
> @@ -8,6 +8,7 @@ Required properties:
> "st,lsm6dsm"
> "st,ism330dlc"
> "st,lsm6dso"
> + "st,asm330lhh"
> - reg: i2c address of the sensor / spi cs line
>
> Optional properties:
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-03-03 16:12 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-02-21 15:20 [PATCH 0/2] add support for ASM330LHH Lorenzo Bianconi
2019-02-21 15:20 ` [PATCH 1/2] iio: imu: st_lsm6dsx: add support to ASM330LHH Lorenzo Bianconi
2019-03-03 16:11 ` Jonathan Cameron
2019-02-21 15:20 ` [PATCH 2/2] dt-bindings: iio: imu: st_lsm6dsx: add asm330lhh device bindings Lorenzo Bianconi
2019-03-03 16:12 ` Jonathan Cameron
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).