From: Jyri Sarha <jsarha@ti.com>
To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org
Cc: fabrizio.castro@bp.renesas.com, Songjun.Wu@atmel.com,
peter.ujfalusi@ti.com, tomi.valkeinen@ti.com,
laurent.pinchart@ideasonboard.com, voice.shen@atmel.com
Subject: [PATCH v3 0/6] drm/bridge: sii902x: HDMI-audio support and some fixes
Date: Wed, 13 Mar 2019 18:01:02 +0200 [thread overview]
Message-ID: <cover.1552492550.git.jsarha@ti.com> (raw)
Changes since v2:
- split dt-binding and related header to a separate patch
- add vendor prefix to i2s-fifo-routing dt-property
- add license identifier and copyright notice to sii902x-audio.h
- sii902x_get_modes() reorder local variables
- put clk_prepare_enable() before clk_get_rate(), according to documentation
clk_get_rate() is only valid once the clock is enabled
The three already reviewed patches are in front:
- drm/bridge: sii902x: add input_bus_flags
- drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID
- drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
The previous review round can be found here:
https://patchwork.kernel.org/cover/10832351/
Jyri Sarha (5):
drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID
drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
dt-bindings: display: sii902x: Remove trailing white space
dt-bindings: display: sii902x: Add HDMI audio bindings
drm/bridge: sii902x: Implement HDMI audio support
Tomi Valkeinen (1):
drm/bridge: sii902x: add input_bus_flags
.../bindings/display/bridge/sii902x.txt | 36 +-
drivers/gpu/drm/bridge/sii902x.c | 472 +++++++++++++++++-
include/dt-bindings/sound/sii902x-audio.h | 17 +
3 files changed, 517 insertions(+), 8 deletions(-)
create mode 100644 include/dt-bindings/sound/sii902x-audio.h
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2019-03-13 16:01 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-13 16:01 Jyri Sarha [this message]
2019-03-13 16:01 ` [PATCH v3 1/6] drm/bridge: sii902x: add input_bus_flags Jyri Sarha
2019-03-13 16:23 ` Laurent Pinchart
2019-03-13 16:01 ` [PATCH v3 2/6] drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID Jyri Sarha
2019-03-13 16:23 ` Laurent Pinchart
2019-03-13 16:01 ` [PATCH v3 3/6] drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz Jyri Sarha
2019-03-13 16:24 ` Laurent Pinchart
2019-03-13 16:01 ` [PATCH v3 4/6] dt-bindings: display: sii902x: Remove trailing white space Jyri Sarha
2019-03-13 16:24 ` Laurent Pinchart
2019-03-13 16:01 ` [PATCH v3 5/6] dt-bindings: display: sii902x: Add HDMI audio bindings Jyri Sarha
2019-03-13 16:29 ` Laurent Pinchart
2019-03-13 16:47 ` Laurent Pinchart
2019-03-13 17:52 ` Jyri Sarha
2019-03-13 18:12 ` Laurent Pinchart
2019-03-13 19:28 ` Jyri Sarha
2019-03-13 16:01 ` [PATCH v3 6/6] drm/bridge: sii902x: Implement HDMI audio support Jyri Sarha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1552492550.git.jsarha@ti.com \
--to=jsarha@ti.com \
--cc=Songjun.Wu@atmel.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabrizio.castro@bp.renesas.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=peter.ujfalusi@ti.com \
--cc=tomi.valkeinen@ti.com \
--cc=voice.shen@atmel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).