[PATCH v3 0/6] drm/bridge: sii902x: HDMI-audio support and some fixes

[PATCH v3 0/6] drm/bridge: sii902x: HDMI-audio support and some fixes

[Jyri Sarha]

Changes since v2:
- split dt-binding and related header to a separate patch
- add vendor prefix to i2s-fifo-routing dt-property
- add license identifier and copyright notice to sii902x-audio.h
- sii902x_get_modes() reorder local variables
- put clk_prepare_enable() before clk_get_rate(), according to documentation
  clk_get_rate() is only valid once the clock is enabled

The three already reviewed patches are in front:
  - drm/bridge: sii902x: add input_bus_flags
  - drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID
  - drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz

The previous review round can be found here:
https://patchwork.kernel.org/cover/10832351/

Jyri Sarha (5):
  drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID
  drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz
  dt-bindings: display: sii902x: Remove trailing white space
  dt-bindings: display: sii902x: Add HDMI audio bindings
  drm/bridge: sii902x: Implement HDMI audio support

Tomi Valkeinen (1):
  drm/bridge: sii902x: add input_bus_flags

 .../bindings/display/bridge/sii902x.txt       |  36 +-
 drivers/gpu/drm/bridge/sii902x.c              | 472 +++++++++++++++++-
 include/dt-bindings/sound/sii902x-audio.h     |  17 +
 3 files changed, 517 insertions(+), 8 deletions(-)
 create mode 100644 include/dt-bindings/sound/sii902x-audio.h

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 1/6] drm/bridge: sii902x: add input_bus_flags

[Jyri Sarha]

From: Tomi Valkeinen <tomi.valkeinen@ti.com>

The driver always sets InputBusFmt:EDGE to 0 (falling edge).

Add drm_bridge_timings's input_bus_flags to reflect that the bridge
samples on falling edges.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
---
 drivers/gpu/drm/bridge/sii902x.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index bfa902013aa4..1afa000141d5 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -459,6 +459,12 @@ static int sii902x_i2c_bypass_deselect(struct i2c_mux_core *mux, u32 chan_id)
 	return 0;
 }
 
+static const struct drm_bridge_timings default_sii902x_timings = {
+	.input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
+		 | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
+		 | DRM_BUS_FLAG_DE_HIGH,
+};
+
 static int sii902x_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
@@ -529,6 +535,7 @@ static int sii902x_probe(struct i2c_client *client,
 
 	sii902x->bridge.funcs = &sii902x_bridge_funcs;
 	sii902x->bridge.of_node = dev->of_node;
+	sii902x->bridge.timings = &default_sii902x_timings;
 	drm_bridge_add(&sii902x->bridge);
 
 	i2c_set_clientdata(client, sii902x);
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 1/6] drm/bridge: sii902x: add input_bus_flags

[Laurent Pinchart]

Hello Jyri,

Thank you for the patch.

On Wed, Mar 13, 2019 at 06:01:03PM +0200, Jyri Sarha wrote:
> From: Tomi Valkeinen <tomi.valkeinen@ti.com>
> 
> The driver always sets InputBusFmt:EDGE to 0 (falling edge).
> 
> Add drm_bridge_timings's input_bus_flags to reflect that the bridge
> samples on falling edges.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Signed-off-by: Jyri Sarha <jsarha@ti.com>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/bridge/sii902x.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
> index bfa902013aa4..1afa000141d5 100644
> --- a/drivers/gpu/drm/bridge/sii902x.c
> +++ b/drivers/gpu/drm/bridge/sii902x.c
> @@ -459,6 +459,12 @@ static int sii902x_i2c_bypass_deselect(struct i2c_mux_core *mux, u32 chan_id)
>  	return 0;
>  }
>  
> +static const struct drm_bridge_timings default_sii902x_timings = {
> +	.input_bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE
> +		 | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE
> +		 | DRM_BUS_FLAG_DE_HIGH,
> +};
> +
>  static int sii902x_probe(struct i2c_client *client,
>  			 const struct i2c_device_id *id)
>  {
> @@ -529,6 +535,7 @@ static int sii902x_probe(struct i2c_client *client,
>  
>  	sii902x->bridge.funcs = &sii902x_bridge_funcs;
>  	sii902x->bridge.of_node = dev->of_node;
> +	sii902x->bridge.timings = &default_sii902x_timings;
>  	drm_bridge_add(&sii902x->bridge);
>  
>  	i2c_set_clientdata(client, sii902x);

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 2/6] drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID

[Jyri Sarha]

Set output mode to HDMI or DVI according to EDID HDMI signature.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
---
 drivers/gpu/drm/bridge/sii902x.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index 1afa000141d5..0e21fa419d27 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -181,11 +181,15 @@ static int sii902x_get_modes(struct drm_connector *connector)
 	struct sii902x *sii902x = connector_to_sii902x(connector);
 	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
 	struct edid *edid;
+	u8 output_mode = SII902X_SYS_CTRL_OUTPUT_DVI;
 	int num = 0, ret;
 
 	edid = drm_get_edid(connector, sii902x->i2cmux->adapter[0]);
 	drm_connector_update_edid_property(connector, edid);
 	if (edid) {
+	        if (drm_detect_hdmi_monitor(edid))
+			output_mode = SII902X_SYS_CTRL_OUTPUT_HDMI;
+
 		num = drm_add_edid_modes(connector, edid);
 		kfree(edid);
 	}
@@ -195,6 +199,11 @@ static int sii902x_get_modes(struct drm_connector *connector)
 	if (ret)
 		return ret;
 
+	ret = regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
+				 SII902X_SYS_CTRL_OUTPUT_MODE, output_mode);
+	if (ret)
+		return ret;
+
 	return num;
 }
 
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 2/6] drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID

[Laurent Pinchart]

Hello Jyri,

Thank you for the patch.

On Wed, Mar 13, 2019 at 06:01:04PM +0200, Jyri Sarha wrote:
> Set output mode to HDMI or DVI according to EDID HDMI signature.
> 
> Signed-off-by: Jyri Sarha <jsarha@ti.com>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  drivers/gpu/drm/bridge/sii902x.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
> index 1afa000141d5..0e21fa419d27 100644
> --- a/drivers/gpu/drm/bridge/sii902x.c
> +++ b/drivers/gpu/drm/bridge/sii902x.c
> @@ -181,11 +181,15 @@ static int sii902x_get_modes(struct drm_connector *connector)
>  	struct sii902x *sii902x = connector_to_sii902x(connector);
>  	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
>  	struct edid *edid;
> +	u8 output_mode = SII902X_SYS_CTRL_OUTPUT_DVI;
>  	int num = 0, ret;
>  
>  	edid = drm_get_edid(connector, sii902x->i2cmux->adapter[0]);
>  	drm_connector_update_edid_property(connector, edid);
>  	if (edid) {
> +	        if (drm_detect_hdmi_monitor(edid))
> +			output_mode = SII902X_SYS_CTRL_OUTPUT_HDMI;
> +
>  		num = drm_add_edid_modes(connector, edid);
>  		kfree(edid);
>  	}
> @@ -195,6 +199,11 @@ static int sii902x_get_modes(struct drm_connector *connector)
>  	if (ret)
>  		return ret;
>  
> +	ret = regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
> +				 SII902X_SYS_CTRL_OUTPUT_MODE, output_mode);
> +	if (ret)
> +		return ret;
> +
>  	return num;
>  }
>  

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 3/6] drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz

[Jyri Sarha]

The pixel clock unit in the first two registers (0x00 and 0x01) of
sii9022 is 10kHz, not 1kHz as in struct drm_display_mode. Division by
10 fixes the issue.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
---
 drivers/gpu/drm/bridge/sii902x.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index 0e21fa419d27..1e917777ed72 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -248,10 +248,11 @@ static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
 	struct regmap *regmap = sii902x->regmap;
 	u8 buf[HDMI_INFOFRAME_SIZE(AVI)];
 	struct hdmi_avi_infoframe frame;
+	u16 pixel_clock_10kHz = adj->clock / 10;
 	int ret;
 
-	buf[0] = adj->clock;
-	buf[1] = adj->clock >> 8;
+	buf[0] = pixel_clock_10kHz & 0xFF;
+	buf[1] = pixel_clock_10kHz >> 8;
 	buf[2] = adj->vrefresh;
 	buf[3] = 0x00;
 	buf[4] = adj->hdisplay;
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 3/6] drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz

[Laurent Pinchart]

Hello Jyri,

Thank you for the patch.

On Wed, Mar 13, 2019 at 06:01:05PM +0200, Jyri Sarha wrote:
> The pixel clock unit in the first two registers (0x00 and 0x01) of
> sii9022 is 10kHz, not 1kHz as in struct drm_display_mode. Division by
> 10 fixes the issue.
> 
> Signed-off-by: Jyri Sarha <jsarha@ti.com>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> ---
>  drivers/gpu/drm/bridge/sii902x.c | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
> index 0e21fa419d27..1e917777ed72 100644
> --- a/drivers/gpu/drm/bridge/sii902x.c
> +++ b/drivers/gpu/drm/bridge/sii902x.c
> @@ -248,10 +248,11 @@ static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
>  	struct regmap *regmap = sii902x->regmap;
>  	u8 buf[HDMI_INFOFRAME_SIZE(AVI)];
>  	struct hdmi_avi_infoframe frame;
> +	u16 pixel_clock_10kHz = adj->clock / 10;
>  	int ret;
>  
> -	buf[0] = adj->clock;
> -	buf[1] = adj->clock >> 8;
> +	buf[0] = pixel_clock_10kHz & 0xFF;

Hex constants usually use lowercase in the kernel. Apart from that,

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> +	buf[1] = pixel_clock_10kHz >> 8;
>  	buf[2] = adj->vrefresh;
>  	buf[3] = 0x00;
>  	buf[4] = adj->hdisplay;

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 4/6] dt-bindings: display: sii902x: Remove trailing white space

[Jyri Sarha]

Remove trailing white space from sii902x display bridge binding.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 Documentation/devicetree/bindings/display/bridge/sii902x.txt | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index 72d2dc6c3e6b..c4c1855ca654 100644
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -5,7 +5,7 @@ Required properties:
 	- reg: i2c address of the bridge
 
 Optional properties:
-	- interrupts: describe the interrupt line used to inform the host 
+	- interrupts: describe the interrupt line used to inform the host
 	  about hotplug events.
 	- reset-gpios: OF device-tree gpio specification for RST_N pin.
 
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 4/6] dt-bindings: display: sii902x: Remove trailing white space

[Laurent Pinchart]

Hello Jyri,

Thank you for the patch.

On Wed, Mar 13, 2019 at 06:01:06PM +0200, Jyri Sarha wrote:
> Remove trailing white space from sii902x display bridge binding.
> 
> Signed-off-by: Jyri Sarha <jsarha@ti.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  Documentation/devicetree/bindings/display/bridge/sii902x.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> index 72d2dc6c3e6b..c4c1855ca654 100644
> --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> @@ -5,7 +5,7 @@ Required properties:
>  	- reg: i2c address of the bridge
>  
>  Optional properties:
> -	- interrupts: describe the interrupt line used to inform the host 
> +	- interrupts: describe the interrupt line used to inform the host
>  	  about hotplug events.
>  	- reset-gpios: OF device-tree gpio specification for RST_N pin.
>  

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 5/6] dt-bindings: display: sii902x: Add HDMI audio bindings

[Jyri Sarha]

The sii902x chip family supports also HDMI audio. Add binding for
describing the necessary i2s and mclk wiring for it.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 .../bindings/display/bridge/sii902x.txt       | 34 +++++++++++++++++++
 include/dt-bindings/sound/sii902x-audio.h     | 17 ++++++++++
 2 files changed, 51 insertions(+)
 create mode 100644 include/dt-bindings/sound/sii902x-audio.h

diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
index c4c1855ca654..977756841193 100644
--- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
+++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
@@ -8,6 +8,29 @@ Optional properties:
 	- interrupts: describe the interrupt line used to inform the host
 	  about hotplug events.
 	- reset-gpios: OF device-tree gpio specification for RST_N pin.
+	- sil,i2s-fifo-routing: Array of exactly 4 integers indicating i2s
+	  pins for audio fifo routing. First integer defines routing to
+	  fifo 0 and second to fifo 1, etc. Integers can be filled with
+	  definitions from: include/dt-bindings/sound/sii902x-audio.h
+	  The available definitions are:
+	  - ENABLE_BIT:	enable this audio fifo
+	  - CONNECT_SD#: route audio input from SD0, SD1, SD2, or SD3 i2s
+			 data input pin
+	  - LEFT_RIGHT_SWAP_BIT: swap i2s input channels for this fifo
+	  I2S HDMI audio is configured only if this property is found.
+	- clocks: phandle mclk
+	- clock-names: "mclk"
+	    Describes SII902x MCLK input. MCLK is used to produce
+	    HDMI audio CTS values. This property is required if
+	    "i2s-fifo-routing"-property is present. This property follows
+	    Documentation/devicetree/bindings/clock/clock-bindings.txt
+	    consumer binding.
+	- #sound-dai-cells = <0>: ASoC codec dai available for simple-card
+	    If audio properties are present sii902x provides an ASoC
+	    codec component driver that can be used by other ASoC
+	    components like simple-card. See binding document for
+	    details:
+	    Documentation/devicetree/bindings/sound/simple-card.txt
 
 Optional subnodes:
 	- video input: this subnode can contain a video input port node
@@ -21,6 +44,17 @@ Example:
 		compatible = "sil,sii9022";
 		reg = <0x39>;
 		reset-gpios = <&pioA 1 0>;
+
+		#sound-dai-cells = <0>;
+		sil,i2s-fifo-routing = <
+			(ENABLE_BIT|CONNECT_SD0)
+			0
+			0
+			0
+		>;
+		clocks = <&mclk>;
+		clock-names = "mclk";
+
 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/include/dt-bindings/sound/sii902x-audio.h b/include/dt-bindings/sound/sii902x-audio.h
new file mode 100644
index 000000000000..0a849904754b
--- /dev/null
+++ b/include/dt-bindings/sound/sii902x-audio.h
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Jyri Sarha <jsarha@ti.com>
+ */
+
+#ifndef __DT_SII9022_AUDIO_H
+#define __DT_SII9022_AUDIO_H
+
+#define ENABLE_BIT			0x80
+#define CONNECT_SD0			0x00
+#define CONNECT_SD1			0x10
+#define CONNECT_SD2			0x20
+#define CONNECT_SD3			0x30
+#define LEFT_RIGHT_SWAP_BIT		0x04
+
+#endif /* __DT_SII9022_AUDIO_H */
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 5/6] dt-bindings: display: sii902x: Add HDMI audio bindings

[Laurent Pinchart]

Hello Jyri,

Thank you for the patch.

On Wed, Mar 13, 2019 at 06:01:07PM +0200, Jyri Sarha wrote:
> The sii902x chip family supports also HDMI audio. Add binding for
> describing the necessary i2s and mclk wiring for it.
> 
> Signed-off-by: Jyri Sarha <jsarha@ti.com>
> ---
>  .../bindings/display/bridge/sii902x.txt       | 34 +++++++++++++++++++
>  include/dt-bindings/sound/sii902x-audio.h     | 17 ++++++++++
>  2 files changed, 51 insertions(+)
>  create mode 100644 include/dt-bindings/sound/sii902x-audio.h
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> index c4c1855ca654..977756841193 100644
> --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> @@ -8,6 +8,29 @@ Optional properties:
>  	- interrupts: describe the interrupt line used to inform the host
>  	  about hotplug events.
>  	- reset-gpios: OF device-tree gpio specification for RST_N pin.
> +	- sil,i2s-fifo-routing: Array of exactly 4 integers indicating i2s
> +	  pins for audio fifo routing. First integer defines routing to
> +	  fifo 0 and second to fifo 1, etc. Integers can be filled with
> +	  definitions from: include/dt-bindings/sound/sii902x-audio.h
> +	  The available definitions are:
> +	  - ENABLE_BIT:	enable this audio fifo
> +	  - CONNECT_SD#: route audio input from SD0, SD1, SD2, or SD3 i2s
> +			 data input pin
> +	  - LEFT_RIGHT_SWAP_BIT: swap i2s input channels for this fifo

Are all combinations valid ? For instance, could we have D1 routed to
the third FIFO, and all other FIFOs disabled ?

> +	  I2S HDMI audio is configured only if this property is found.
> +	- clocks: phandle mclk

Maybe "clocks: phandle and clock specifier for each clock listed in the clock-names property" ?

> +	- clock-names: "mclk"
> +	    Describes SII902x MCLK input. MCLK is used to produce
> +	    HDMI audio CTS values. This property is required if
> +	    "i2s-fifo-routing"-property is present. This property follows

The property is named sil,i2s-fifo-routing.

> +	    Documentation/devicetree/bindings/clock/clock-bindings.txt
> +	    consumer binding.
> +	- #sound-dai-cells = <0>: ASoC codec dai available for simple-card
> +	    If audio properties are present sii902x provides an ASoC
> +	    codec component driver that can be used by other ASoC
> +	    components like simple-card. See binding document for
> +	    details:
> +	    Documentation/devicetree/bindings/sound/simple-card.txt
>  
>  Optional subnodes:
>  	- video input: this subnode can contain a video input port node
> @@ -21,6 +44,17 @@ Example:
>  		compatible = "sil,sii9022";
>  		reg = <0x39>;
>  		reset-gpios = <&pioA 1 0>;
> +
> +		#sound-dai-cells = <0>;
> +		sil,i2s-fifo-routing = <
> +			(ENABLE_BIT|CONNECT_SD0)
> +			0
> +			0
> +			0
> +		>;
> +		clocks = <&mclk>;
> +		clock-names = "mclk";
> +
>  		ports {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> diff --git a/include/dt-bindings/sound/sii902x-audio.h b/include/dt-bindings/sound/sii902x-audio.h
> new file mode 100644
> index 000000000000..0a849904754b
> --- /dev/null
> +++ b/include/dt-bindings/sound/sii902x-audio.h
> @@ -0,0 +1,17 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> + * Author: Jyri Sarha <jsarha@ti.com>
> + */
> +
> +#ifndef __DT_SII9022_AUDIO_H
> +#define __DT_SII9022_AUDIO_H
> +
> +#define ENABLE_BIT			0x80
> +#define CONNECT_SD0			0x00
> +#define CONNECT_SD1			0x10
> +#define CONNECT_SD2			0x20
> +#define CONNECT_SD3			0x30
> +#define LEFT_RIGHT_SWAP_BIT		0x04

This is fairly generic, should you prefix the macros with SII9022 ?

> +
> +#endif /* __DT_SII9022_AUDIO_H */

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 5/6] dt-bindings: display: sii902x: Add HDMI audio bindings

[Laurent Pinchart]

Hello again,

On Wed, Mar 13, 2019 at 06:29:19PM +0200, Laurent Pinchart wrote:
> On Wed, Mar 13, 2019 at 06:01:07PM +0200, Jyri Sarha wrote:
> > The sii902x chip family supports also HDMI audio. Add binding for
> > describing the necessary i2s and mclk wiring for it.
> > 
> > Signed-off-by: Jyri Sarha <jsarha@ti.com>
> > ---
> >  .../bindings/display/bridge/sii902x.txt       | 34 +++++++++++++++++++
> >  include/dt-bindings/sound/sii902x-audio.h     | 17 ++++++++++
> >  2 files changed, 51 insertions(+)
> >  create mode 100644 include/dt-bindings/sound/sii902x-audio.h
> > 
> > diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> > index c4c1855ca654..977756841193 100644
> > --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> > +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> > @@ -8,6 +8,29 @@ Optional properties:
> >  	- interrupts: describe the interrupt line used to inform the host
> >  	  about hotplug events.
> >  	- reset-gpios: OF device-tree gpio specification for RST_N pin.
> > +	- sil,i2s-fifo-routing: Array of exactly 4 integers indicating i2s
> > +	  pins for audio fifo routing. First integer defines routing to
> > +	  fifo 0 and second to fifo 1, etc. Integers can be filled with
> > +	  definitions from: include/dt-bindings/sound/sii902x-audio.h
> > +	  The available definitions are:
> > +	  - ENABLE_BIT:	enable this audio fifo
> > +	  - CONNECT_SD#: route audio input from SD0, SD1, SD2, or SD3 i2s
> > +			 data input pin
> > +	  - LEFT_RIGHT_SWAP_BIT: swap i2s input channels for this fifo
> 
> Are all combinations valid ? For instance, could we have D1 routed to
> the third FIFO, and all other FIFOs disabled ?

I found the answer to this question in the datasheet:

"Note that no gaps are allowed when mapping channels to FIFOs – SD pins
must be mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2,
and so on."

I think we can thus simplify the bindings, and use an approach similar
to the one taken by the data-lanes property for CSI-2. Furthermore, I
think this should be standardized, not left device-specific.

How about an sd-lanes property (better names are welcome) that would
store an array of N integers, where each sd-lanes[i] tells which SD pin
the i-th FIFO is connected to ?

> > +	  I2S HDMI audio is configured only if this property is found.
> > +	- clocks: phandle mclk
> 
> Maybe "clocks: phandle and clock specifier for each clock listed in the clock-names property" ?
> 
> > +	- clock-names: "mclk"
> > +	    Describes SII902x MCLK input. MCLK is used to produce
> > +	    HDMI audio CTS values. This property is required if
> > +	    "i2s-fifo-routing"-property is present. This property follows
> 
> The property is named sil,i2s-fifo-routing.
> 
> > +	    Documentation/devicetree/bindings/clock/clock-bindings.txt
> > +	    consumer binding.
> > +	- #sound-dai-cells = <0>: ASoC codec dai available for simple-card
> > +	    If audio properties are present sii902x provides an ASoC
> > +	    codec component driver that can be used by other ASoC
> > +	    components like simple-card. See binding document for
> > +	    details:
> > +	    Documentation/devicetree/bindings/sound/simple-card.txt
> >  
> >  Optional subnodes:
> >  	- video input: this subnode can contain a video input port node
> > @@ -21,6 +44,17 @@ Example:
> >  		compatible = "sil,sii9022";
> >  		reg = <0x39>;
> >  		reset-gpios = <&pioA 1 0>;
> > +
> > +		#sound-dai-cells = <0>;
> > +		sil,i2s-fifo-routing = <
> > +			(ENABLE_BIT|CONNECT_SD0)
> > +			0
> > +			0
> > +			0
> > +		>;
> > +		clocks = <&mclk>;
> > +		clock-names = "mclk";
> > +
> >  		ports {
> >  			#address-cells = <1>;
> >  			#size-cells = <0>;

I also forgot to mention that the audio connection should be modeled
using OF graph too.

> > diff --git a/include/dt-bindings/sound/sii902x-audio.h b/include/dt-bindings/sound/sii902x-audio.h
> > new file mode 100644
> > index 000000000000..0a849904754b
> > --- /dev/null
> > +++ b/include/dt-bindings/sound/sii902x-audio.h
> > @@ -0,0 +1,17 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> > + * Author: Jyri Sarha <jsarha@ti.com>
> > + */
> > +
> > +#ifndef __DT_SII9022_AUDIO_H
> > +#define __DT_SII9022_AUDIO_H
> > +
> > +#define ENABLE_BIT			0x80
> > +#define CONNECT_SD0			0x00
> > +#define CONNECT_SD1			0x10
> > +#define CONNECT_SD2			0x20
> > +#define CONNECT_SD3			0x30
> > +#define LEFT_RIGHT_SWAP_BIT		0x04
> 
> This is fairly generic, should you prefix the macros with SII9022 ?
> 
> > +
> > +#endif /* __DT_SII9022_AUDIO_H */

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 5/6] dt-bindings: display: sii902x: Add HDMI audio bindings

[Jyri Sarha]

On 13/03/2019 18:47, Laurent Pinchart wrote:
> Hello again,
> 
> On Wed, Mar 13, 2019 at 06:29:19PM +0200, Laurent Pinchart wrote:
>> On Wed, Mar 13, 2019 at 06:01:07PM +0200, Jyri Sarha wrote:
>>> The sii902x chip family supports also HDMI audio. Add binding for
>>> describing the necessary i2s and mclk wiring for it.
>>>
>>> Signed-off-by: Jyri Sarha <jsarha@ti.com>
>>> ---
>>>  .../bindings/display/bridge/sii902x.txt       | 34 +++++++++++++++++++
>>>  include/dt-bindings/sound/sii902x-audio.h     | 17 ++++++++++
>>>  2 files changed, 51 insertions(+)
>>>  create mode 100644 include/dt-bindings/sound/sii902x-audio.h
>>>
>>> diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
>>> index c4c1855ca654..977756841193 100644
>>> --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
>>> +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
>>> @@ -8,6 +8,29 @@ Optional properties:
>>>  	- interrupts: describe the interrupt line used to inform the host
>>>  	  about hotplug events.
>>>  	- reset-gpios: OF device-tree gpio specification for RST_N pin.
>>> +	- sil,i2s-fifo-routing: Array of exactly 4 integers indicating i2s
>>> +	  pins for audio fifo routing. First integer defines routing to
>>> +	  fifo 0 and second to fifo 1, etc. Integers can be filled with
>>> +	  definitions from: include/dt-bindings/sound/sii902x-audio.h
>>> +	  The available definitions are:
>>> +	  - ENABLE_BIT:	enable this audio fifo
>>> +	  - CONNECT_SD#: route audio input from SD0, SD1, SD2, or SD3 i2s
>>> +			 data input pin
>>> +	  - LEFT_RIGHT_SWAP_BIT: swap i2s input channels for this fifo
>>
>> Are all combinations valid ? For instance, could we have D1 routed to
>> the third FIFO, and all other FIFOs disabled ?
> 
> I found the answer to this question in the datasheet:
> 
> "Note that no gaps are allowed when mapping channels to FIFOs – SD pins
> must be mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2,
> and so on."
> 
> I think we can thus simplify the bindings, and use an approach similar
> to the one taken by the data-lanes property for CSI-2. Furthermore, I
> think this should be standardized, not left device-specific.
> 
> How about an sd-lanes property (better names are welcome) that would
> store an array of N integers, where each sd-lanes[i] tells which SD pin
> the i-th FIFO is connected to ?

I agree otherwise, but I would still rather use i2s than sd, because it
is more explicit. SD overlaps with so many other acronyms. So how would
i2s-lanes sound?

> 
>>> +	  I2S HDMI audio is configured only if this property is found.
>>> +	- clocks: phandle mclk
>>
>> Maybe "clocks: phandle and clock specifier for each clock listed in the clock-names property" ?
>>

Ok

>>> +	- clock-names: "mclk"
>>> +	    Describes SII902x MCLK input. MCLK is used to produce
>>> +	    HDMI audio CTS values. This property is required if
>>> +	    "i2s-fifo-routing"-property is present. This property follows
>>
>> The property is named sil,i2s-fifo-routing.
>>

Ok

>>> +	    Documentation/devicetree/bindings/clock/clock-bindings.txt
>>> +	    consumer binding.
>>> +	- #sound-dai-cells = <0>: ASoC codec dai available for simple-card
>>> +	    If audio properties are present sii902x provides an ASoC
>>> +	    codec component driver that can be used by other ASoC
>>> +	    components like simple-card. See binding document for
>>> +	    details:
>>> +	    Documentation/devicetree/bindings/sound/simple-card.txt
>>>  
>>>  Optional subnodes:
>>>  	- video input: this subnode can contain a video input port node
>>> @@ -21,6 +44,17 @@ Example:
>>>  		compatible = "sil,sii9022";
>>>  		reg = <0x39>;
>>>  		reset-gpios = <&pioA 1 0>;
>>> +
>>> +		#sound-dai-cells = <0>;
>>> +		sil,i2s-fifo-routing = <
>>> +			(ENABLE_BIT|CONNECT_SD0)
>>> +			0
>>> +			0
>>> +			0
>>> +		>;
>>> +		clocks = <&mclk>;
>>> +		clock-names = "mclk";
>>> +
>>>  		ports {
>>>  			#address-cells = <1>;
>>>  			#size-cells = <0>;
> 
> I also forgot to mention that the audio connection should be modeled
> using OF graph too.
> 

With the audio configuration sii902x becomes an ASoC codec component.
There are current more than one way to describe the connections between
ASoC components (see [1] and [2] for details). The individual ASoC DAI
drivers (digital audio interface) do not need to know about the audio
system topology, that is taken care of by the machine driver (or card
driver if you will), for instance simple-card or audio-graph-card.

However, since sii902x device is agnostic about the way the connections
are described, I don't think I should go into too many details about how
the possible bindings. However, I should add a reference at least to
audio-graph-card too.

[1] Documentation/devicetree/bindings/sound/simple-card.txt
[2] Documentation/devicetree/bindings/sound/audio-graph-card.txt


>>> diff --git a/include/dt-bindings/sound/sii902x-audio.h b/include/dt-bindings/sound/sii902x-audio.h
>>> new file mode 100644
>>> index 000000000000..0a849904754b
>>> --- /dev/null
>>> +++ b/include/dt-bindings/sound/sii902x-audio.h
>>> @@ -0,0 +1,17 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
>>> + * Author: Jyri Sarha <jsarha@ti.com>
>>> + */
>>> +
>>> +#ifndef __DT_SII9022_AUDIO_H
>>> +#define __DT_SII9022_AUDIO_H
>>> +
>>> +#define ENABLE_BIT			0x80
>>> +#define CONNECT_SD0			0x00
>>> +#define CONNECT_SD1			0x10
>>> +#define CONNECT_SD2			0x20
>>> +#define CONNECT_SD3			0x30
>>> +#define LEFT_RIGHT_SWAP_BIT		0x04
>>
>> This is fairly generic, should you prefix the macros with SII9022 ?
>>
>>> +
>>> +#endif /* __DT_SII9022_AUDIO_H */
> 


-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 5/6] dt-bindings: display: sii902x: Add HDMI audio bindings

[Laurent Pinchart]

Hi Jyri,

On Wed, Mar 13, 2019 at 07:52:08PM +0200, Jyri Sarha wrote:
> On 13/03/2019 18:47, Laurent Pinchart wrote:
> > On Wed, Mar 13, 2019 at 06:29:19PM +0200, Laurent Pinchart wrote:
> >> On Wed, Mar 13, 2019 at 06:01:07PM +0200, Jyri Sarha wrote:
> >>> The sii902x chip family supports also HDMI audio. Add binding for
> >>> describing the necessary i2s and mclk wiring for it.
> >>>
> >>> Signed-off-by: Jyri Sarha <jsarha@ti.com>
> >>> ---
> >>>  .../bindings/display/bridge/sii902x.txt       | 34 +++++++++++++++++++
> >>>  include/dt-bindings/sound/sii902x-audio.h     | 17 ++++++++++
> >>>  2 files changed, 51 insertions(+)
> >>>  create mode 100644 include/dt-bindings/sound/sii902x-audio.h
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> >>> index c4c1855ca654..977756841193 100644
> >>> --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> >>> +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
> >>> @@ -8,6 +8,29 @@ Optional properties:
> >>>  	- interrupts: describe the interrupt line used to inform the host
> >>>  	  about hotplug events.
> >>>  	- reset-gpios: OF device-tree gpio specification for RST_N pin.
> >>> +	- sil,i2s-fifo-routing: Array of exactly 4 integers indicating i2s
> >>> +	  pins for audio fifo routing. First integer defines routing to
> >>> +	  fifo 0 and second to fifo 1, etc. Integers can be filled with
> >>> +	  definitions from: include/dt-bindings/sound/sii902x-audio.h
> >>> +	  The available definitions are:
> >>> +	  - ENABLE_BIT:	enable this audio fifo
> >>> +	  - CONNECT_SD#: route audio input from SD0, SD1, SD2, or SD3 i2s
> >>> +			 data input pin
> >>> +	  - LEFT_RIGHT_SWAP_BIT: swap i2s input channels for this fifo
> >>
> >> Are all combinations valid ? For instance, could we have D1 routed to
> >> the third FIFO, and all other FIFOs disabled ?
> > 
> > I found the answer to this question in the datasheet:
> > 
> > "Note that no gaps are allowed when mapping channels to FIFOs – SD pins
> > must be mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2,
> > and so on."
> > 
> > I think we can thus simplify the bindings, and use an approach similar
> > to the one taken by the data-lanes property for CSI-2. Furthermore, I
> > think this should be standardized, not left device-specific.
> > 
> > How about an sd-lanes property (better names are welcome) that would
> > store an array of N integers, where each sd-lanes[i] tells which SD pin
> > the i-th FIFO is connected to ?
> 
> I agree otherwise, but I would still rather use i2s than sd, because it
> is more explicit. SD overlaps with so many other acronyms. So how would
> i2s-lanes sound?

Sounds good to me. It's a better name, so it's welcome :-) I don't know
what terminology is usually used in the audio world for this, so I was
pretty sure my initial name proposal was bad.

Is there a risk of needing to describe the clock lane separately in the
future (for this or another I2S-related chip) ? If so, maybe
i2s-data-lanes, or just data-lanes, would be a better pick.

> >>> +	  I2S HDMI audio is configured only if this property is found.
> >>> +	- clocks: phandle mclk
> >>
> >> Maybe "clocks: phandle and clock specifier for each clock listed in
> >> the clock-names property" ?
> 
> Ok
> 
> >>> +	- clock-names: "mclk"
> >>> +	    Describes SII902x MCLK input. MCLK is used to produce
> >>> +	    HDMI audio CTS values. This property is required if
> >>> +	    "i2s-fifo-routing"-property is present. This property follows
> >>
> >> The property is named sil,i2s-fifo-routing.
> 
> Ok
> 
> >>> +	    Documentation/devicetree/bindings/clock/clock-bindings.txt
> >>> +	    consumer binding.
> >>> +	- #sound-dai-cells = <0>: ASoC codec dai available for simple-card
> >>> +	    If audio properties are present sii902x provides an ASoC
> >>> +	    codec component driver that can be used by other ASoC
> >>> +	    components like simple-card. See binding document for
> >>> +	    details:
> >>> +	    Documentation/devicetree/bindings/sound/simple-card.txt
> >>>  
> >>>  Optional subnodes:
> >>>  	- video input: this subnode can contain a video input port node
> >>> @@ -21,6 +44,17 @@ Example:
> >>>  		compatible = "sil,sii9022";
> >>>  		reg = <0x39>;
> >>>  		reset-gpios = <&pioA 1 0>;
> >>> +
> >>> +		#sound-dai-cells = <0>;
> >>> +		sil,i2s-fifo-routing = <
> >>> +			(ENABLE_BIT|CONNECT_SD0)
> >>> +			0
> >>> +			0
> >>> +			0
> >>> +		>;
> >>> +		clocks = <&mclk>;
> >>> +		clock-names = "mclk";
> >>> +
> >>>  		ports {
> >>>  			#address-cells = <1>;
> >>>  			#size-cells = <0>;
> > 
> > I also forgot to mention that the audio connection should be modeled
> > using OF graph too.
> 
> With the audio configuration sii902x becomes an ASoC codec component.
> There are current more than one way to describe the connections between
> ASoC components (see [1] and [2] for details). The individual ASoC DAI
> drivers (digital audio interface) do not need to know about the audio
> system topology, that is taken care of by the machine driver (or card
> driver if you will), for instance simple-card or audio-graph-card.
> 
> However, since sii902x device is agnostic about the way the connections
> are described, I don't think I should go into too many details about how
> the possible bindings. However, I should add a reference at least to
> audio-graph-card too.
> 
> [1] Documentation/devicetree/bindings/sound/simple-card.txt
> [2] Documentation/devicetree/bindings/sound/audio-graph-card.txt

References to those bindings would be helpful, yes.

> >>> diff --git a/include/dt-bindings/sound/sii902x-audio.h b/include/dt-bindings/sound/sii902x-audio.h
> >>> new file mode 100644
> >>> index 000000000000..0a849904754b
> >>> --- /dev/null
> >>> +++ b/include/dt-bindings/sound/sii902x-audio.h
> >>> @@ -0,0 +1,17 @@
> >>> +// SPDX-License-Identifier: GPL-2.0
> >>> +/*
> >>> + * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
> >>> + * Author: Jyri Sarha <jsarha@ti.com>
> >>> + */
> >>> +
> >>> +#ifndef __DT_SII9022_AUDIO_H
> >>> +#define __DT_SII9022_AUDIO_H
> >>> +
> >>> +#define ENABLE_BIT			0x80
> >>> +#define CONNECT_SD0			0x00
> >>> +#define CONNECT_SD1			0x10
> >>> +#define CONNECT_SD2			0x20
> >>> +#define CONNECT_SD3			0x30
> >>> +#define LEFT_RIGHT_SWAP_BIT		0x04
> >>
> >> This is fairly generic, should you prefix the macros with SII9022 ?
> >>
> >>> +
> >>> +#endif /* __DT_SII9022_AUDIO_H */

-- 
Regards,

Laurent Pinchart
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Re: [PATCH v3 5/6] dt-bindings: display: sii902x: Add HDMI audio bindings

[Jyri Sarha]

On 13/03/2019 20:12, Laurent Pinchart wrote:
> Hi Jyri,
> 
> On Wed, Mar 13, 2019 at 07:52:08PM +0200, Jyri Sarha wrote:
>> On 13/03/2019 18:47, Laurent Pinchart wrote:
>>> On Wed, Mar 13, 2019 at 06:29:19PM +0200, Laurent Pinchart wrote:
>>>> On Wed, Mar 13, 2019 at 06:01:07PM +0200, Jyri Sarha wrote:
>>>>> The sii902x chip family supports also HDMI audio. Add binding for
>>>>> describing the necessary i2s and mclk wiring for it.
>>>>>
>>>>> Signed-off-by: Jyri Sarha <jsarha@ti.com>
>>>>> ---
>>>>>  .../bindings/display/bridge/sii902x.txt       | 34 +++++++++++++++++++
>>>>>  include/dt-bindings/sound/sii902x-audio.h     | 17 ++++++++++
>>>>>  2 files changed, 51 insertions(+)
>>>>>  create mode 100644 include/dt-bindings/sound/sii902x-audio.h
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/display/bridge/sii902x.txt b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
>>>>> index c4c1855ca654..977756841193 100644
>>>>> --- a/Documentation/devicetree/bindings/display/bridge/sii902x.txt
>>>>> +++ b/Documentation/devicetree/bindings/display/bridge/sii902x.txt
>>>>> @@ -8,6 +8,29 @@ Optional properties:
>>>>>  	- interrupts: describe the interrupt line used to inform the host
>>>>>  	  about hotplug events.
>>>>>  	- reset-gpios: OF device-tree gpio specification for RST_N pin.
>>>>> +	- sil,i2s-fifo-routing: Array of exactly 4 integers indicating i2s
>>>>> +	  pins for audio fifo routing. First integer defines routing to
>>>>> +	  fifo 0 and second to fifo 1, etc. Integers can be filled with
>>>>> +	  definitions from: include/dt-bindings/sound/sii902x-audio.h
>>>>> +	  The available definitions are:
>>>>> +	  - ENABLE_BIT:	enable this audio fifo
>>>>> +	  - CONNECT_SD#: route audio input from SD0, SD1, SD2, or SD3 i2s
>>>>> +			 data input pin
>>>>> +	  - LEFT_RIGHT_SWAP_BIT: swap i2s input channels for this fifo
>>>> Are all combinations valid ? For instance, could we have D1 routed to
>>>> the third FIFO, and all other FIFOs disabled ?
>>> I found the answer to this question in the datasheet:
>>>
>>> "Note that no gaps are allowed when mapping channels to FIFOs – SD pins
>>> must be mapped to FIFO#0 and FIFO#1 before mapping a channel to FIFO#2,
>>> and so on."
>>>
>>> I think we can thus simplify the bindings, and use an approach similar
>>> to the one taken by the data-lanes property for CSI-2. Furthermore, I
>>> think this should be standardized, not left device-specific.
>>>
>>> How about an sd-lanes property (better names are welcome) that would
>>> store an array of N integers, where each sd-lanes[i] tells which SD pin
>>> the i-th FIFO is connected to ?
>> I agree otherwise, but I would still rather use i2s than sd, because it
>> is more explicit. SD overlaps with so many other acronyms. So how would
>> i2s-lanes sound?
> Sounds good to me. It's a better name, so it's welcome :-) I don't know
> what terminology is usually used in the audio world for this, so I was
> pretty sure my initial name proposal was bad.
> 
> Is there a risk of needing to describe the clock lane separately in the
> future (for this or another I2S-related chip) ? If so, maybe
> i2s-data-lanes, or just data-lanes, would be a better pick.
> 

Usually (or always AFAIK) there is only one bit clock and one frame
clock lane, and 1 - n data lanes. But still being more explicit does not
hurt, let's make it i2s-data-lanes.

Thanks for the prompt review. I'll try to make the changes for tomorrow.

Best regards,
Jyri

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

[PATCH v3 6/6] drm/bridge: sii902x: Implement HDMI audio support

[Jyri Sarha]

Implement HDMI audio support by using ASoC HDMI codec. The commit
implements the necessary callbacks and configuration for the HDMI
codec and registers a virtual platform device for the codec to attach.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
 drivers/gpu/drm/bridge/sii902x.c | 455 ++++++++++++++++++++++++++++++-
 1 file changed, 448 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index 1e917777ed72..3f49bf24e2a3 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -27,12 +27,16 @@
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/regmap.h>
+#include <linux/clk.h>
 
 #include <drm/drmP.h>
 #include <drm/drm_atomic_helper.h>
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_edid.h>
 
+#include <sound/hdmi-codec.h>
+#include <dt-bindings/sound/sii902x-audio.h>
+
 #define SII902X_TPI_VIDEO_DATA			0x0
 
 #define SII902X_TPI_PIXEL_REPETITION		0x8
@@ -74,6 +78,77 @@
 #define SII902X_AVI_POWER_STATE_MSK		GENMASK(1, 0)
 #define SII902X_AVI_POWER_STATE_D(l)		((l) & SII902X_AVI_POWER_STATE_MSK)
 
+/* Audio  */
+#define SII902X_TPI_I2S_ENABLE_MAPPING_REG	0x1f
+#define SII902X_TPI_I2S_CONFIG_FIFO0			(0 << 0)
+#define SII902X_TPI_I2S_CONFIG_FIFO1			(1 << 0)
+#define SII902X_TPI_I2S_CONFIG_FIFO2			(2 << 0)
+#define SII902X_TPI_I2S_CONFIG_FIFO3			(3 << 0)
+#define SII902X_TPI_I2S_LEFT_RIGHT_SWAP			(1 << 2)
+#define SII902X_TPI_I2S_AUTO_DOWNSAMPLE			(1 << 3)
+#define SII902X_TPI_I2S_SELECT_SD0			(0 << 4)
+#define SII902X_TPI_I2S_SELECT_SD1			(1 << 4)
+#define SII902X_TPI_I2S_SELECT_SD2			(2 << 4)
+#define SII902X_TPI_I2S_SELECT_SD3			(3 << 4)
+#define SII902X_TPI_I2S_FIFO_ENABLE			(1 << 7)
+
+#define SII902X_TPI_I2S_INPUT_CONFIG_REG	0x20
+#define SII902X_TPI_I2S_FIRST_BIT_SHIFT_YES		(0 << 0)
+#define SII902X_TPI_I2S_FIRST_BIT_SHIFT_NO		(1 << 0)
+#define SII902X_TPI_I2S_SD_DIRECTION_MSB_FIRST		(0 << 1)
+#define SII902X_TPI_I2S_SD_DIRECTION_LSB_FIRST		(1 << 1)
+#define SII902X_TPI_I2S_SD_JUSTIFY_LEFT			(0 << 2)
+#define SII902X_TPI_I2S_SD_JUSTIFY_RIGHT		(1 << 2)
+#define SII902X_TPI_I2S_WS_POLARITY_LOW			(0 << 3)
+#define SII902X_TPI_I2S_WS_POLARITY_HIGH		(1 << 3)
+#define SII902X_TPI_I2S_MCLK_MULTIPLIER_128		(0 << 4)
+#define SII902X_TPI_I2S_MCLK_MULTIPLIER_256		(1 << 4)
+#define SII902X_TPI_I2S_MCLK_MULTIPLIER_384		(2 << 4)
+#define SII902X_TPI_I2S_MCLK_MULTIPLIER_512		(3 << 4)
+#define SII902X_TPI_I2S_MCLK_MULTIPLIER_768		(4 << 4)
+#define SII902X_TPI_I2S_MCLK_MULTIPLIER_1024		(5 << 4)
+#define SII902X_TPI_I2S_MCLK_MULTIPLIER_1152		(6 << 4)
+#define SII902X_TPI_I2S_MCLK_MULTIPLIER_192		(7 << 4)
+#define SII902X_TPI_I2S_SCK_EDGE_FALLING		(0 << 7)
+#define SII902X_TPI_I2S_SCK_EDGE_RISING			(1 << 7)
+
+#define SII902X_TPI_I2S_STRM_HDR_BASE	0x21
+#define SII902X_TPI_I2S_STRM_HDR_SIZE	5
+
+#define SII902X_TPI_AUDIO_CONFIG_BYTE2_REG	0x26
+#define SII902X_TPI_AUDIO_CODING_STREAM_HEADER		(0 << 0)
+#define SII902X_TPI_AUDIO_CODING_PCM			(1 << 0)
+#define SII902X_TPI_AUDIO_CODING_AC3			(2 << 0)
+#define SII902X_TPI_AUDIO_CODING_MPEG1			(3 << 0)
+#define SII902X_TPI_AUDIO_CODING_MP3			(4 << 0)
+#define SII902X_TPI_AUDIO_CODING_MPEG2			(5 << 0)
+#define SII902X_TPI_AUDIO_CODING_AAC			(6 << 0)
+#define SII902X_TPI_AUDIO_CODING_DTS			(7 << 0)
+#define SII902X_TPI_AUDIO_CODING_ATRAC			(8 << 0)
+#define SII902X_TPI_AUDIO_MUTE_DISABLE			(0 << 4)
+#define SII902X_TPI_AUDIO_MUTE_ENABLE			(1 << 4)
+#define SII902X_TPI_AUDIO_LAYOUT_2_CHANNELS		(0 << 5)
+#define SII902X_TPI_AUDIO_LAYOUT_8_CHANNELS		(1 << 5)
+#define SII902X_TPI_AUDIO_INTERFACE_DISABLE		(0 << 6)
+#define SII902X_TPI_AUDIO_INTERFACE_SPDIF		(1 << 6)
+#define SII902X_TPI_AUDIO_INTERFACE_I2S			(2 << 6)
+
+#define SII902X_TPI_AUDIO_CONFIG_BYTE3_REG	0x27
+#define SII902X_TPI_AUDIO_FREQ_STREAM			(0 << 3)
+#define SII902X_TPI_AUDIO_FREQ_32KHZ			(1 << 3)
+#define SII902X_TPI_AUDIO_FREQ_44KHZ			(2 << 3)
+#define SII902X_TPI_AUDIO_FREQ_48KHZ			(3 << 3)
+#define SII902X_TPI_AUDIO_FREQ_88KHZ			(4 << 3)
+#define SII902X_TPI_AUDIO_FREQ_96KHZ			(5 << 3)
+#define SII902X_TPI_AUDIO_FREQ_176KHZ			(6 << 3)
+#define SII902X_TPI_AUDIO_FREQ_192KHZ			(7 << 3)
+#define SII902X_TPI_AUDIO_SAMPLE_SIZE_STREAM		(0 << 6)
+#define SII902X_TPI_AUDIO_SAMPLE_SIZE_16		(1 << 6)
+#define SII902X_TPI_AUDIO_SAMPLE_SIZE_20		(2 << 6)
+#define SII902X_TPI_AUDIO_SAMPLE_SIZE_24		(3 << 6)
+
+#define SII902X_TPI_AUDIO_CONFIG_BYTE4_REG	0x28
+
 #define SII902X_INT_ENABLE			0x3c
 #define SII902X_INT_STATUS			0x3d
 #define SII902X_HOTPLUG_EVENT			BIT(0)
@@ -81,6 +156,16 @@
 
 #define SII902X_REG_TPI_RQB			0xc7
 
+/* Indirect internal register access */
+#define SII902X_IND_SET_PAGE			0xbc
+#define SII902X_IND_OFFSET			0xbd
+#define SII902X_IND_VALUE			0xbe
+
+#define SII902X_TPI_MISC_INFOFRAME_BASE		0xbf
+#define SII902X_TPI_MISC_INFOFRAME_END		0xde
+#define SII902X_TPI_MISC_INFOFRAME_SIZE	\
+	(SII902X_TPI_MISC_INFOFRAME_END - SII902X_TPI_MISC_INFOFRAME_BASE)
+
 #define SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS	500
 
 struct sii902x {
@@ -90,6 +175,16 @@ struct sii902x {
 	struct drm_connector connector;
 	struct gpio_desc *reset_gpio;
 	struct i2c_mux_core *i2cmux;
+	/*
+	 * Mutex protects audio and video functions from interfering
+	 * each other, by keeping their i2c command sequences atomic.
+	 */
+	struct mutex mutex;
+	struct sii902x_audio {
+		struct platform_device *pdev;
+		struct clk *mclk;
+		u32 i2s_fifo_routing[4];
+	} audio;
 };
 
 static int sii902x_read_unlocked(struct i2c_client *i2c, u8 reg, u8 *val)
@@ -161,8 +256,12 @@ sii902x_connector_detect(struct drm_connector *connector, bool force)
 	struct sii902x *sii902x = connector_to_sii902x(connector);
 	unsigned int status;
 
+	mutex_lock(&sii902x->mutex);
+
 	regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status);
 
+	mutex_unlock(&sii902x->mutex);
+
 	return (status & SII902X_PLUGGED_STATUS) ?
 	       connector_status_connected : connector_status_disconnected;
 }
@@ -180,10 +279,12 @@ static int sii902x_get_modes(struct drm_connector *connector)
 {
 	struct sii902x *sii902x = connector_to_sii902x(connector);
 	u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
-	struct edid *edid;
 	u8 output_mode = SII902X_SYS_CTRL_OUTPUT_DVI;
+	struct edid *edid;
 	int num = 0, ret;
 
+	mutex_lock(&sii902x->mutex);
+
 	edid = drm_get_edid(connector, sii902x->i2cmux->adapter[0]);
 	drm_connector_update_edid_property(connector, edid);
 	if (edid) {
@@ -197,14 +298,19 @@ static int sii902x_get_modes(struct drm_connector *connector)
 	ret = drm_display_info_set_bus_formats(&connector->display_info,
 					       &bus_format, 1);
 	if (ret)
-		return ret;
+		goto error_out;
 
 	ret = regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
 				 SII902X_SYS_CTRL_OUTPUT_MODE, output_mode);
 	if (ret)
-		return ret;
+		goto error_out;
 
-	return num;
+	ret = num;
+
+error_out:
+	mutex_unlock(&sii902x->mutex);
+
+	return ret;
 }
 
 static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector,
@@ -224,20 +330,28 @@ static void sii902x_bridge_disable(struct drm_bridge *bridge)
 {
 	struct sii902x *sii902x = bridge_to_sii902x(bridge);
 
+	mutex_lock(&sii902x->mutex);
+
 	regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
 			   SII902X_SYS_CTRL_PWR_DWN,
 			   SII902X_SYS_CTRL_PWR_DWN);
+
+	mutex_unlock(&sii902x->mutex);
 }
 
 static void sii902x_bridge_enable(struct drm_bridge *bridge)
 {
 	struct sii902x *sii902x = bridge_to_sii902x(bridge);
 
+	mutex_lock(&sii902x->mutex);
+
 	regmap_update_bits(sii902x->regmap, SII902X_PWR_STATE_CTRL,
 			   SII902X_AVI_POWER_STATE_MSK,
 			   SII902X_AVI_POWER_STATE_D(0));
 	regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA,
 			   SII902X_SYS_CTRL_PWR_DWN, 0);
+
+	mutex_unlock(&sii902x->mutex);
 }
 
 static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
@@ -264,26 +378,31 @@ static void sii902x_bridge_mode_set(struct drm_bridge *bridge,
 	buf[9] = SII902X_TPI_AVI_INPUT_RANGE_AUTO |
 		 SII902X_TPI_AVI_INPUT_COLORSPACE_RGB;
 
+	mutex_lock(&sii902x->mutex);
+
 	ret = regmap_bulk_write(regmap, SII902X_TPI_VIDEO_DATA, buf, 10);
 	if (ret)
-		return;
+		goto out;
 
 	ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, adj, false);
 	if (ret < 0) {
 		DRM_ERROR("couldn't fill AVI infoframe\n");
-		return;
+		goto out;
 	}
 
 	ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf));
 	if (ret < 0) {
 		DRM_ERROR("failed to pack AVI infoframe: %d\n", ret);
-		return;
+		goto out;
 	}
 
 	/* Do not send the infoframe header, but keep the CRC field. */
 	regmap_bulk_write(regmap, SII902X_TPI_AVI_INFOFRAME,
 			  buf + HDMI_INFOFRAME_HEADER_SIZE - 1,
 			  HDMI_AVI_INFOFRAME_SIZE + 1);
+
+out:
+	mutex_unlock(&sii902x->mutex);
 }
 
 static int sii902x_bridge_attach(struct drm_bridge *bridge)
@@ -324,6 +443,323 @@ static const struct drm_bridge_funcs sii902x_bridge_funcs = {
 	.enable = sii902x_bridge_enable,
 };
 
+static int sii902x_mute(struct sii902x *sii902x, bool mute)
+{
+	struct device *dev = &sii902x->i2c->dev;
+	unsigned int val = mute ? SII902X_TPI_AUDIO_MUTE_ENABLE :
+		SII902X_TPI_AUDIO_MUTE_DISABLE;
+
+	dev_dbg(dev, "%s: %s\n", __func__, mute ? "Muted" : "Unmuted");
+
+	return regmap_update_bits(sii902x->regmap,
+				  SII902X_TPI_AUDIO_CONFIG_BYTE2_REG,
+				  SII902X_TPI_AUDIO_MUTE_ENABLE, val);
+}
+
+static const unsigned int sii902x_mclk_div_table[] = {
+	128, 256, 384, 512, 768, 1024, 1152, 192 };
+
+static int sii902x_select_mclk_div(u8 *i2s_config_reg, unsigned int rate,
+				   unsigned int mclk)
+{
+	unsigned int div = mclk / rate;
+	int distance = 100000;
+	u8 i, nearest = 0;
+
+	for (i = 0; i < ARRAY_SIZE(sii902x_mclk_div_table); i++) {
+		unsigned int d = abs(div - sii902x_mclk_div_table[i]);
+
+		if (d >= distance)
+			continue;
+
+		nearest = i;
+		distance = d;
+		if (d == 0)
+			break;
+	}
+
+	*i2s_config_reg |= nearest << 4;
+
+	if (distance != 0)
+		return sii902x_mclk_div_table[nearest];
+
+	return 0;
+}
+
+static const struct sii902x_sample_freq {
+	u32 freq;
+	u8 val;
+} sii902x_sample_freq[] = {
+	{ .freq = 32000,	.val = SII902X_TPI_AUDIO_FREQ_32KHZ },
+	{ .freq = 44000,	.val = SII902X_TPI_AUDIO_FREQ_44KHZ },
+	{ .freq = 48000,	.val = SII902X_TPI_AUDIO_FREQ_48KHZ },
+	{ .freq = 88000,	.val = SII902X_TPI_AUDIO_FREQ_88KHZ },
+	{ .freq = 96000,	.val = SII902X_TPI_AUDIO_FREQ_96KHZ },
+	{ .freq = 176000,	.val = SII902X_TPI_AUDIO_FREQ_176KHZ },
+	{ .freq = 192000,	.val = SII902X_TPI_AUDIO_FREQ_192KHZ },
+};
+
+static int sii902x_audio_hw_params(struct device *dev, void *data,
+				   struct hdmi_codec_daifmt *daifmt,
+				   struct hdmi_codec_params *params)
+{
+	struct sii902x *sii902x = dev_get_drvdata(dev);
+	u8 i2s_config_reg = SII902X_TPI_I2S_SD_DIRECTION_MSB_FIRST;
+	u8 config_byte2_reg = (SII902X_TPI_AUDIO_INTERFACE_I2S |
+			       SII902X_TPI_AUDIO_MUTE_ENABLE |
+			       SII902X_TPI_AUDIO_CODING_PCM);
+	u8 config_byte3_reg = 0;
+	u8 infoframe_buf[HDMI_INFOFRAME_SIZE(AUDIO)];
+	unsigned long mclk_rate;
+	int i, ret;
+
+	if (daifmt->bit_clk_master || daifmt->frame_clk_master) {
+		dev_dbg(dev, "%s: I2S master mode not supported\n", __func__);
+		return -EINVAL;
+	}
+
+	switch (daifmt->fmt) {
+	case HDMI_I2S:
+		i2s_config_reg |= SII902X_TPI_I2S_FIRST_BIT_SHIFT_YES |
+			SII902X_TPI_I2S_SD_JUSTIFY_LEFT;
+		break;
+	case HDMI_RIGHT_J:
+		i2s_config_reg |= SII902X_TPI_I2S_SD_JUSTIFY_RIGHT;
+		break;
+	case HDMI_LEFT_J:
+		i2s_config_reg |= SII902X_TPI_I2S_SD_JUSTIFY_LEFT;
+		break;
+	default:
+		dev_dbg(dev, "%s: Unsupported i2s format %u\n", __func__,
+			daifmt->fmt);
+		return -EINVAL;
+	}
+
+	if (daifmt->bit_clk_inv)
+		i2s_config_reg |= SII902X_TPI_I2S_SCK_EDGE_FALLING;
+	else
+		i2s_config_reg |= SII902X_TPI_I2S_SCK_EDGE_RISING;
+
+	if (daifmt->frame_clk_inv)
+		i2s_config_reg |= SII902X_TPI_I2S_WS_POLARITY_LOW;
+	else
+		i2s_config_reg |= SII902X_TPI_I2S_WS_POLARITY_HIGH;
+
+	if (params->channels > 2)
+		config_byte2_reg |= SII902X_TPI_AUDIO_LAYOUT_8_CHANNELS;
+	else
+		config_byte2_reg |= SII902X_TPI_AUDIO_LAYOUT_2_CHANNELS;
+
+	switch (params->sample_width) {
+	case 16:
+		config_byte3_reg |= SII902X_TPI_AUDIO_SAMPLE_SIZE_16;
+		break;
+	case 20:
+		config_byte3_reg |= SII902X_TPI_AUDIO_SAMPLE_SIZE_20;
+		break;
+	case 24:
+	case 32:
+		config_byte3_reg |= SII902X_TPI_AUDIO_SAMPLE_SIZE_24;
+		break;
+	default:
+		dev_err(dev, "%s: Unsupported sample width %u\n", __func__,
+			params->sample_width);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sii902x_sample_freq); i++) {
+		if (params->sample_rate == sii902x_sample_freq[i].freq) {
+			config_byte3_reg |= sii902x_sample_freq[i].val;
+			break;
+		}
+	}
+
+	ret = clk_prepare_enable(sii902x->audio.mclk);
+	if (ret) {
+		dev_err(dev, "Enabling mclk failed: %d\n", ret);
+		return ret;
+	}
+
+	mclk_rate = clk_get_rate(sii902x->audio.mclk);
+
+	ret = sii902x_select_mclk_div(&i2s_config_reg, params->sample_rate,
+				      mclk_rate);
+	if (ret)
+		dev_dbg(dev, "Inaccurate reference clock (%ld/%d != %u)\n",
+			mclk_rate, ret, params->sample_rate);
+
+	mutex_lock(&sii902x->mutex);
+
+	ret = regmap_write(sii902x->regmap,
+			   SII902X_TPI_AUDIO_CONFIG_BYTE2_REG,
+			   config_byte2_reg);
+	if (ret < 0)
+		goto out;
+
+	ret = regmap_write(sii902x->regmap, SII902X_TPI_I2S_INPUT_CONFIG_REG,
+			   i2s_config_reg);
+	if (ret)
+		goto out;
+
+	for (i = 0; i < ARRAY_SIZE(sii902x->audio.i2s_fifo_routing); i++)
+		regmap_write(sii902x->regmap,
+			     SII902X_TPI_I2S_ENABLE_MAPPING_REG,
+			     sii902x->audio.i2s_fifo_routing[i]);
+
+	ret = regmap_write(sii902x->regmap, SII902X_TPI_AUDIO_CONFIG_BYTE3_REG,
+			   config_byte3_reg);
+	if (ret)
+		goto out;
+
+	ret = regmap_bulk_write(sii902x->regmap, SII902X_TPI_I2S_STRM_HDR_BASE,
+				params->iec.status,
+				min((size_t) SII902X_TPI_I2S_STRM_HDR_SIZE,
+				    sizeof(params->iec.status)));
+	if (ret)
+		goto out;
+
+	ret = hdmi_audio_infoframe_pack(&params->cea, infoframe_buf,
+					sizeof(infoframe_buf));
+	if (ret < 0) {
+		dev_err(dev, "%s: Failed to pack audio infoframe: %d\n",
+			__func__, ret);
+		goto out;
+	}
+
+	ret = regmap_bulk_write(sii902x->regmap,
+				SII902X_TPI_MISC_INFOFRAME_BASE,
+				infoframe_buf,
+				min(ret, SII902X_TPI_MISC_INFOFRAME_SIZE));
+	if (ret)
+		goto out;
+
+	/* Decode Level 0 Packets */
+	ret = regmap_write(sii902x->regmap, SII902X_IND_SET_PAGE, 0x02);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(sii902x->regmap, SII902X_IND_OFFSET, 0x24);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(sii902x->regmap, SII902X_IND_VALUE, 0x02);
+	if (ret)
+		goto out;
+
+	dev_dbg(dev, "%s: hdmi audio enabled\n", __func__);
+out:
+	mutex_unlock(&sii902x->mutex);
+
+	if (ret) {
+		clk_disable_unprepare(sii902x->audio.mclk);
+		dev_err(dev, "%s: hdmi audio enable failed: %d\n", __func__,
+			ret);
+	}
+
+	return ret;
+}
+
+static void sii902x_audio_shutdown(struct device *dev, void *data)
+{
+	struct sii902x *sii902x = dev_get_drvdata(dev);
+
+	mutex_lock(&sii902x->mutex);
+
+	regmap_write(sii902x->regmap, SII902X_TPI_AUDIO_CONFIG_BYTE2_REG,
+		     SII902X_TPI_AUDIO_INTERFACE_DISABLE);
+
+	mutex_unlock(&sii902x->mutex);
+
+	clk_disable_unprepare(sii902x->audio.mclk);
+}
+
+int sii902x_audio_digital_mute(struct device *dev, void *data, bool enable)
+{
+	struct sii902x *sii902x = dev_get_drvdata(dev);
+
+	mutex_lock(&sii902x->mutex);
+
+	sii902x_mute(sii902x, enable);
+
+	mutex_unlock(&sii902x->mutex);
+
+	return 0;
+}
+
+static int sii902x_audio_get_eld(struct device *dev, void *data,
+				 uint8_t *buf, size_t len)
+{
+	struct sii902x *sii902x = dev_get_drvdata(dev);
+
+	mutex_lock(&sii902x->mutex);
+
+	memcpy(buf, sii902x->connector.eld,
+	       min(sizeof(sii902x->connector.eld), len));
+
+	mutex_unlock(&sii902x->mutex);
+
+	return 0;
+}
+
+static const struct hdmi_codec_ops sii902x_audio_codec_ops = {
+	.hw_params = sii902x_audio_hw_params,
+	.audio_shutdown = sii902x_audio_shutdown,
+	.digital_mute = sii902x_audio_digital_mute,
+	.get_eld = sii902x_audio_get_eld,
+};
+
+static int sii902x_audio_codec_init(struct sii902x *sii902x,
+				    struct device *dev)
+{
+	static const u8 i2s_fifo_defaults[] = {
+		SII902X_TPI_I2S_CONFIG_FIFO0,
+		SII902X_TPI_I2S_CONFIG_FIFO1,
+		SII902X_TPI_I2S_CONFIG_FIFO2,
+		SII902X_TPI_I2S_CONFIG_FIFO3,
+	};
+	struct hdmi_codec_pdata codec_data = {
+		.ops = &sii902x_audio_codec_ops,
+		.i2s = 1, /* Only i2s support for now. */
+		.spdif = 0,
+		.max_i2s_channels = 0,
+	};
+	int ret, i;
+
+	ret = of_property_read_u32_array(dev->of_node, "sil,i2s-fifo-routing",
+					 sii902x->audio.i2s_fifo_routing,
+					 ARRAY_SIZE(sii902x->audio.i2s_fifo_routing));
+
+	if (ret != 0) {
+		if (ret == -EINVAL)
+			dev_dbg(dev, "%s: No \"i2s-fifo-routing\", no audio\n",
+			__func__);
+		else
+			dev_err(dev,
+				"%s: Error gettin \"i2s-fifo-routing\": %d\n",
+				__func__, ret);
+		return 0;
+	}
+
+	sii902x->audio.mclk = devm_clk_get(dev, "mclk");
+	if (IS_ERR(sii902x->audio.mclk)) {
+		dev_err(dev, "%s: No clock (audio mclk) found: %ld\n",
+			__func__, PTR_ERR(sii902x->audio.mclk));
+		return 0;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(sii902x->audio.i2s_fifo_routing); i++) {
+		if (sii902x->audio.i2s_fifo_routing[i] & ENABLE_BIT)
+			codec_data.max_i2s_channels += 2;
+		sii902x->audio.i2s_fifo_routing[i] |= i2s_fifo_defaults[i];
+	}
+
+	sii902x->audio.pdev = platform_device_register_data(
+		dev, HDMI_CODEC_DRV_NAME, PLATFORM_DEVID_AUTO,
+		&codec_data, sizeof(codec_data));
+
+	return PTR_ERR_OR_ZERO(sii902x->audio.pdev);
+}
+
 static const struct regmap_range sii902x_volatile_ranges[] = {
 	{ .range_min = 0, .range_max = 0xff },
 };
@@ -336,6 +772,7 @@ static const struct regmap_access_table sii902x_volatile_table = {
 static const struct regmap_config sii902x_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
+	.max_register = SII902X_TPI_MISC_INFOFRAME_END,
 	.volatile_table = &sii902x_volatile_table,
 	.cache_type = REGCACHE_NONE,
 };
@@ -508,6 +945,8 @@ static int sii902x_probe(struct i2c_client *client,
 		return PTR_ERR(sii902x->reset_gpio);
 	}
 
+	mutex_init(&sii902x->mutex);
+
 	sii902x_reset(sii902x);
 
 	ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0);
@@ -548,6 +987,8 @@ static int sii902x_probe(struct i2c_client *client,
 	sii902x->bridge.timings = &default_sii902x_timings;
 	drm_bridge_add(&sii902x->bridge);
 
+	sii902x_audio_codec_init(sii902x, dev);
+
 	i2c_set_clientdata(client, sii902x);
 
 	sii902x->i2cmux = i2c_mux_alloc(client->adapter, dev,
-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel