[PATCH v3 00/12] usb: Handle different sublink speeds

[PATCH v3 00/12] usb: Handle different sublink speeds

[Thinh Nguyen]

A USB super-speed-plus device may operate at different sublink speed and lane
count (e.g. gen2x2, gen1x2, or gen2x1). The usb gadget stack needs to be able
to handle a couple things:

1) Report the sublink speed attributes the device support
2) Select the sublink speed attribute

This series introduces sublink speed attribute structure to ch9.h to capture
the device capability of the gadget. It also introduces a new gadget ops
udc_set_num_lanes_and_speed to select a specific sublink speed.

DWC3 needs this support for DWC_usb32 IP. Implement the new changes for DWC3.

Changes in v3:
 - Remove "num-lanes" and "lane-speed-mantissa-gbps" common properties
 - Remove "num-lanes" and "lane-speed-mantissa-gbps" properties validation in dwc3
 - Update "maximum-speed" to support variations of SSP Gen X x Y
 - Update common function to parse new strings for "maximum-speed"
 - Update commit messages for the new changes

Changes in v2:
 - Move usb_sublink_speed attribute struct and enum to include/linux/usb/ch9.h
 - Use "num-lanes" and "lane-speed-mantissa-gbps" as common properties instead
 - Add common functions to get num-lanes and lsm properties
 - Fix missing gen1x2 sublink speed attribute check report in dwc3


Thinh Nguyen (12):
  usb: ch9: Add sublink speed struct
  usb: gadget: composite: Avoid using magic numbers
  usb: gadget: Expose sublink speed attributes
  usb: gadget: Set max speed for SSP devices
  usb: composite: Properly report sublink speed
  usb: devicetree: Include USB SSP Gen X x Y
  usb: common: Add function to get num_lanes and transfer rate
  usb: dwc3: Initialize lane count and sublink speed
  usb: dwc3: gadget: Report sublink speed capability
  usb: dwc3: gadget: Implement setting of sublink speed
  usb: dwc3: gadget: Track connected lane and sublink speed
  usb: dwc3: gadget: Set speed only up to the max supported

 Documentation/devicetree/bindings/usb/generic.txt |  11 +-
 drivers/usb/common/common.c                       |  47 ++++++-
 drivers/usb/dwc3/core.c                           |  31 ++++-
 drivers/usb/dwc3/core.h                           |  14 +++
 drivers/usb/dwc3/gadget.c                         | 143 +++++++++++++++++++++-
 drivers/usb/gadget/composite.c                    |  81 ++++++++----
 drivers/usb/gadget/udc/core.c                     |  24 +++-
 include/linux/usb/ch9.h                           |  68 ++++++++++
 include/linux/usb/gadget.h                        |  23 ++++
 9 files changed, 398 insertions(+), 44 deletions(-)


base-commit: a95fcda246dc3e9f5d00222c9a8f0a76aa0bb950
-- 
2.11.0

[PATCH v3 06/12] usb: devicetree: Include USB SSP Gen X x Y

[Thinh Nguyen]

According to the USB 3.2 spec, a super-speed-plus device can operate at
gen2x2, gen2x1, or gen1x2. If the USB controller device supports
multiple lanes at different transfer rates, the user can specify the HW
capability via these new speed strings:

"super-speed-plus-gen2x2"
"super-speed-plus-gen2x1"
"super-speed-plus-gen1x2"

If the argument is simply "super-speed-plus", USB controllers should
default to their maximum transfer rate and number of lanes.

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v3:
- Use "maximum-speed" to include both the num-lane and transfer rate for SSP
- Remove "num-lanes" and "lane-speed-mantissa-gbps" properties
Changes in v2:
- Make "num-lanes" and "lane-speed-mantissa-gbps" common USB properties

 Documentation/devicetree/bindings/usb/generic.txt | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
index ba472e7aefc9..8541b9571f2f 100644
--- a/Documentation/devicetree/bindings/usb/generic.txt
+++ b/Documentation/devicetree/bindings/usb/generic.txt
@@ -3,10 +3,13 @@ Generic USB Properties
 Optional properties:
  - maximum-speed: tells USB controllers we want to work up to a certain
 			speed. Valid arguments are "super-speed-plus",
-			"super-speed", "high-speed", "full-speed" and
-			"low-speed". In case this isn't passed via DT, USB
-			controllers should default to their maximum HW
-			capability.
+			"super-speed-plus-gen2x2", "super-speed-plus-gen2x1",
+			"super-speed-plus-gen1x2", "super-speed", "high-speed",
+			"full-speed" and "low-speed". In case this isn't passed
+			via DT, USB controllers should default to their maximum
+			HW capability. Similarly, if the argument is
+			"super-speed-plus", USB controllers should default to
+			their maximum transfer rate and number of lanes.
  - dr_mode: tells Dual-Role USB controllers that we want to work on a
 			particular mode. Valid arguments are "host",
 			"peripheral" and "otg". In case this attribute isn't
-- 
2.11.0