[PATCH v2 0/2] Add drivers for Intel Keem Bay SoC timer block

[vijayakannan.ayyathurai@intel.com]

From: Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com>

Hi,

This patch set adds the driver for Intel Keem Bay SoC timer block, which
contains 32-bit general purpose timers, a 64 bit free running counter.

Patch 1 holds the Device Tree binding documentation and
Patch 2 holds the Device Driver for clocksource and clockevent.

It was tested on the Keem Bay evaluation module board.

Thanks,
Vijay

Changes since v1:
 - Add support for KEEMBAY_TIMER to get selected through Kconfig.platforms.
 - Add CLOCK_EVT_FEAT_DYNIRQ as part of clockevent feature.
 - Avoid overlapping reg regions across 2 device nodes.
 - Simplify 2 device nodes as 1 because both are from same IP block.
 - Adapt the driver code according to the new simplified devicetree.

Vijayakannan Ayyathurai (2):
  dt-bindings: timer: Add bindings for Intel Keem Bay SoC timer
  clocksource: Add Intel Keem Bay Timer Support

 .../bindings/timer/intel,keembay-timer.yaml   |  52 ++++
 arch/arm64/Kconfig.platforms                  |   1 +
 drivers/clocksource/Kconfig                   |  10 +
 drivers/clocksource/Makefile                  |   1 +
 drivers/clocksource/timer-keembay.c           | 225 ++++++++++++++++++
 5 files changed, 289 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/timer/intel,keembay-timer.yaml
 create mode 100644 drivers/clocksource/timer-keembay.c


base-commit: 5c8fe583cce542aa0b84adc939ce85293de36e5e
prerequisite-patch-id: bbb340c3a34059ea6960e8b96f5ad3bf0b4ae7b0
prerequisite-patch-id: b71b548284a57a38ce96d9bb523eadfccabd6e02
-- 
2.17.1