[PATCH 0/4] Refactor the PRCI driver to reduce the complexity

[Zong Li <zong.li@sifive.com>]

This patch set tries to improve the PRCI driver to reduce the
complexity, we remove the SoCs C files by putting putting all stuff in
each SoCs header file, and include these SoCs-specific header files in
core of PRCI. It can also avoid the W=1 kernel build warnings about
variable defined but not used [-Wunused-const-variable=], like 'commit
487dc7bb6a0c ("clk: sifive:fu540-prci: Declare static const variable
'prci_clk_fu540' where it's used")' does.

This patch set also contains the dt-bindings and dts change, because
we change the macro name for fu540 and fu740 by adding the prefix
respectively.

Thanks all for your review and suggestions.

Zong Li (4):
  dt-bindings: change the macro name of prci in header files and example
  riscv: dts: Change the macro name of prci in each device node
  clk: sifive: Add SoCs prefix in each SoCs-dependent data
  clk: sifive: Move all stuff into SoCs header files from C files

 .../devicetree/bindings/gpio/sifive,gpio.yaml |   2 +-
 .../bindings/pci/sifive,fu740-pcie.yaml       |   2 +-
 .../bindings/serial/sifive-serial.yaml        |   2 +-
 arch/riscv/boot/dts/sifive/fu540-c000.dtsi    |  22 +--
 arch/riscv/boot/dts/sifive/fu740-c000.dtsi    |  26 ++--
 drivers/clk/sifive/Makefile                   |   2 +-
 drivers/clk/sifive/fu540-prci.c               |  89 ------------
 drivers/clk/sifive/fu540-prci.h               |  91 +++++++++++-
 drivers/clk/sifive/fu740-prci.c               | 134 ------------------
 drivers/clk/sifive/fu740-prci.h               | 130 ++++++++++++++++-
 drivers/clk/sifive/sifive-prci.c              |   5 -
 include/dt-bindings/clock/sifive-fu540-prci.h |   8 +-
 include/dt-bindings/clock/sifive-fu740-prci.h |  18 +--
 13 files changed, 254 insertions(+), 277 deletions(-)
 delete mode 100644 drivers/clk/sifive/fu540-prci.c
 delete mode 100644 drivers/clk/sifive/fu740-prci.c

-- 
2.31.1