From: ChiaEn Wu <peterwu.pub@gmail.com>
To: sre@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org
Cc: chiaen_wu@richtek.com, cy_huang@richtek.com,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-pm@vger.kernel.org
Subject: [PATCH v2 0/3] Add Richtek RT9467 5A Battery Charger support
Date: Wed, 5 Oct 2022 19:37:19 +0800 [thread overview]
Message-ID: <cover.1664997251.git.chiaen_wu@richtek.com> (raw)
From: ChiaEn Wu <chiaen_wu@richtek.com>
This patch set is to add Richtek RT9467 5A Battery Charger support.
RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger
for portable applications.
It integrates a synchronous PWM controller, power MOSFETs,
input current sensing and regulation, high-accuracy voltage regulation,
and charge termination. The charge current is regulated through
integrated sensing resistors.
The RT9467 also features USB On-The-Go (OTG) support. It also integrates
D+/D- pin for USB host/charging port detection.
This charger driver is based on a 'linear_ranger' queued patch which adds
'LINEAR_RANGE_IDX' macro for declaring the linear_range struct simply.
https://lore.kernel.org/all/20220920161218.dkkfvfomrruebahi@mercury.elektranox.org/
Thank you,
ChiaEn Wu
---
Change in v2:
- In Patch 1/3 (dt-bindings: RT9467 Charger DTS)
- Revise the definition of 'enable-gpios'
- Revise the node name to generic name in the example
('rt9467@5b' --> 'charger@5b')
- Revise the example usage of 'charge-enable-gpios' with GPIO flags
- In Patch 2/3 (power: supply: RT9467 Charger Driver)
- Add missing header file <linux/bitfied.h>
- Add new header files <linux/sysfs.h> and <linux/kstrtox.h> for adding
'sysoff' sysfs feature
- Add assign 'rt9467_sysfs_groups' to '.attr_grp' of psy config
- Remove unused varible 'rt9467_port_stat_names[]'
- In Patch 3/3 (ABI Documentation for RT9467 sysfs attribute)
- New file since v2 patchset
ChiaEn Wu (3):
dt-bindings: power: supply: Add Richtek RT9467 battery charger
power: supply: rt9467: Add Richtek RT9467 charger driver
Documentation: power: rt9467: Document exported sysfs entries
Documentation/ABI/testing/sysfs-class-power-rt9467 | 19 +
.../power/supply/richtek,rt9467-charger.yaml | 82 ++
drivers/power/supply/Kconfig | 19 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/rt9467-charger.c | 1282 ++++++++++++++++++++
5 files changed, 1403 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-class-power-rt9467
create mode 100644 Documentation/devicetree/bindings/power/supply/richtek,rt9467-charger.yaml
create mode 100644 drivers/power/supply/rt9467-charger.c
--
2.7.4
next reply other threads:[~2022-10-05 11:42 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-05 11:37 ChiaEn Wu [this message]
2022-10-05 11:37 ` [PATCH v2 1/3] dt-bindings: power: supply: Add Richtek RT9467 battery charger ChiaEn Wu
2022-10-05 14:51 ` Krzysztof Kozlowski
2022-10-05 11:37 ` [PATCH v2 2/3] power: supply: rt9467: Add Richtek RT9467 charger driver ChiaEn Wu
2022-10-05 11:37 ` [PATCH v2 3/3] Documentation: power: rt9467: Document exported sysfs entries ChiaEn Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1664997251.git.chiaen_wu@richtek.com \
--to=peterwu.pub@gmail.com \
--cc=chiaen_wu@richtek.com \
--cc=cy_huang@richtek.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).