[PATCH v11 0/9] Enable IPQ9754 USB

[PATCH v11 0/9] Enable IPQ9754 USB

[Varadarajan Narayanan]

This patch series adds the relevant phy and controller
configurations for enabling USB on IPQ9754

Depends on:
https://lore.kernel.org/all/20230217142030.16012-1-quic_devipriy@quicinc.com/
https://lore.kernel.org/lkml/20230407155727.20615-1-quic_devipriy@quicinc.com/T/

[v11]:
	- Rename dwc_0 -> usb_0_dwc3
	- Minor change in qcom,sc8280xp-qmp-usb3-uni-phy.yaml to factor in
	  latest updates to the file

[v10]:
	- Fix regulator definitions
	- Address couple of other comments

[v9]:
	- Update bindings to make power-domains as optional since
	  IPQ9574 doesn't have GDSCs

[v8]:
	- Update bindings for the clock name change
[v7]:
	- com_aux -> cfg_ahb in patch 7

[v6]:
        - Incorporated review comments
	- Resolve make dtbs_check messages
	- Fixed pcs_usb offset
	- Board dts file name changed

[v5]:
        - Incorporated review comments
	- 'make dtbs_check' giving the following messages since
	  ipq9574 doesn't have power domains. Hope this is ok

		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

	- Move qmp phy DT node to newer specification

[v4]:
        - Incorporated review comments
	- Address all 'make dtbs_check' errors

[v3]:
        - Incorporated review comments regarding coding style

[v2]:
        - Incorporated review comments regarding coding style,
          maintaining sorted order of entries and unused phy register
          offsets
        - Removed NOC clock entries from DT node (will be implemented
          later with interconnect support)
        - Fixed 'make dtbs_check' errors/warnings

[v1]:
        https://lore.kernel.org/linux-arm-msm/5dac3aa4-8dc7-f9eb-5cf3-b361efdc9494@linaro.org/T/

Varadarajan Narayanan (9):
  dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible
  dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY
  dt-bindings: usb: dwc3: Add IPQ9574 compatible
  clk: qcom: gcc-ipq9574: Add USB related clocks
  phy: qcom-qusb2: add QUSB2 support for IPQ9574
  phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence
  arm64: dts: qcom: ipq9574: Add USB related nodes
  arm64: dts: qcom: ipq9574: Add LDO regulator node
  arm64: dts: qcom: ipq9574: Enable USB

 .../devicetree/bindings/phy/qcom,qusb2-phy.yaml    |   3 +-
 .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml        |  44 ++++++--
 .../devicetree/bindings/usb/qcom,dwc3.yaml         |   3 +-
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts        |  30 ++++++
 arch/arm64/boot/dts/qcom/ipq9574.dtsi              | 104 +++++++++++++++++++
 drivers/clk/qcom/gcc-ipq9574.c                     |  37 +++++++
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c            | 115 +++++++++++++++++++++
 drivers/phy/qualcomm/phy-qcom-qusb2.c              |   3 +
 include/dt-bindings/clock/qcom,ipq9574-gcc.h       |   2 +
 9 files changed, 333 insertions(+), 8 deletions(-)

-- 
2.7.4

[PATCH v11 1/9] dt-bindings: phy: qcom,qusb2: Document IPQ9574 compatible

[Varadarajan Narayanan]

Document the compatible string used for the qusb2 phy in IPQ9574.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v5:
	- Undo v4 changes

 Changes in v4:
	- Remove constraints not applicable to IPQ9574

 Changes in v3:
	- Maintain the proper sorted order

 Changes in v2:
	- Moved ipq6018 to the proper place and placed ipq9574
	  next to it as suggested by Dmitry
---
 Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index 543c1a2..95eecba 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -18,13 +18,14 @@ properties:
     oneOf:
       - items:
           - enum:
+              - qcom,ipq6018-qusb2-phy
               - qcom,ipq8074-qusb2-phy
+              - qcom,ipq9574-qusb2-phy
               - qcom,msm8953-qusb2-phy
               - qcom,msm8996-qusb2-phy
               - qcom,msm8998-qusb2-phy
               - qcom,qcm2290-qusb2-phy
               - qcom,sdm660-qusb2-phy
-              - qcom,ipq6018-qusb2-phy
               - qcom,sm4250-qusb2-phy
               - qcom,sm6115-qusb2-phy
       - items:
-- 
2.7.4

[PATCH v11 2/9] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY

[Varadarajan Narayanan]

* Add dt-bindings for USB3 PHY found on Qualcomm IPQ9574

* Making power-domains as optional since IPQ9574 doesn't have GDSCs

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v11:
	- Have power-domains as required for non ipq9574 SoCs

 Changes in v10:
	- Remove maxItems for clocks as it is present in top level

 Changes in v9:
	- Move 'allOf' to the correct position

 Changes in v8:
	- Update clock names for ipq9574

 Changes in v6:
	- Made power-domains optional

Note: In the earlier patch sets, had used the (legacy)
specification available in qcom,msm8996-qmp-usb3-phy.yaml. Moved
to newer specification in qcom,sc8280xp-qmp-usb3-uni-phy.yaml
---
 .../phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml        | 44 +++++++++++++++++++---
 1 file changed, 38 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index c61cea4..a272c40 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -16,6 +16,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,ipq9574-qmp-usb3-phy
       - qcom,sa8775p-qmp-usb3-uni-phy
       - qcom,sc8280xp-qmp-usb3-uni-phy
 
@@ -26,11 +27,7 @@ properties:
     maxItems: 4
 
   clock-names:
-    items:
-      - const: aux
-      - const: ref
-      - const: com_aux
-      - const: pipe
+    maxItems: 4
 
   power-domains:
     maxItems: 1
@@ -61,7 +58,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -70,6 +66,42 @@ required:
   - clock-output-names
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq9574-qmp-usb3-phy
+    then:
+      properties:
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: cfg_ahb
+            - const: pipe
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sa8775p-qmp-usb3-uni-phy
+              - qcom,sc8280xp-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: ref
+            - const: com_aux
+            - const: pipe
+      required:
+        - power-domains
+
 additionalProperties: false
 
 examples:
-- 
2.7.4

Re: [PATCH v11 2/9] dt-bindings: phy: qcom,qmp-usb: Add IPQ9574 USB3 PHY

[Krzysztof Kozlowski]

On 09/05/2023 13:54, Varadarajan Narayanan wrote:
> * Add dt-bindings for USB3 PHY found on Qualcomm IPQ9574
> 
> * Making power-domains as optional since IPQ9574 doesn't have GDSCs
> 
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
>  Changes in v11:
> 	- Have power-domains as required for non ipq9574 SoCs

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof

[PATCH v11 3/9] dt-bindings: usb: dwc3: Add IPQ9574 compatible

[Varadarajan Narayanan]

* Document the IPQ9574 dwc3 compatible.

* Make power-domains as optional since IPQ9574 doesn't have GDSCs

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v9:
	- Place ipq9574 alongwith similar SoCs instead of new entry
	- Make power-domains as optional since IPQ9574 doesn't have GDSCs

 Changes in v6:
	- Made power-domains as optional
	- Resolved all 'make dtbs_check' messages

 Changes in v5:
	- Restore removed constraints

 Changes in v4:
	- Update other relevant sections
	- Remove constraints not applicable to IPQ9574
---
 Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 4a36e2b..ae24dac 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -17,6 +17,7 @@ properties:
           - qcom,ipq6018-dwc3
           - qcom,ipq8064-dwc3
           - qcom,ipq8074-dwc3
+          - qcom,ipq9574-dwc3
           - qcom,msm8953-dwc3
           - qcom,msm8994-dwc3
           - qcom,msm8996-dwc3
@@ -134,7 +135,6 @@ required:
   - "#address-cells"
   - "#size-cells"
   - ranges
-  - power-domains
   - clocks
   - clock-names
   - interrupts
@@ -178,6 +178,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq9574-dwc3
               - qcom,msm8953-dwc3
               - qcom,msm8996-dwc3
               - qcom,msm8998-dwc3
-- 
2.7.4

[PATCH v11 4/9] clk: qcom: gcc-ipq9574: Add USB related clocks

[Varadarajan Narayanan]

Add the clocks needed for enabling USB in IPQ9574

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v10:
	- Add 'const' for .hw.init = &(struct clk_init_data)

 Changes in v2:
	- Fixed coding style issues
---
 drivers/clk/qcom/gcc-ipq9574.c               | 37 ++++++++++++++++++++++++++++
 include/dt-bindings/clock/qcom,ipq9574-gcc.h |  2 ++
 2 files changed, 39 insertions(+)

diff --git a/drivers/clk/qcom/gcc-ipq9574.c b/drivers/clk/qcom/gcc-ipq9574.c
index a4cf750..6869e8e 100644
--- a/drivers/clk/qcom/gcc-ipq9574.c
+++ b/drivers/clk/qcom/gcc-ipq9574.c
@@ -2025,6 +2025,41 @@ static struct clk_regmap_mux usb0_pipe_clk_src = {
 	},
 };
 
+static struct clk_branch gcc_usb0_pipe_clk = {
+	.halt_reg = 0x2c054,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x2c054,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data){
+			.name = "gcc_usb0_pipe_clk",
+			.parent_hws = (const struct clk_hw *[]) {
+				&usb0_pipe_clk_src.clkr.hw
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_usb0_sleep_clk = {
+	.halt_reg = 0x2c058,
+	.clkr = {
+		.enable_reg = 0x2c058,
+		.enable_mask = BIT(0),
+		.hw.init = &(const struct clk_init_data){
+			.name = "gcc_usb0_sleep_clk",
+			.parent_hws = (const struct clk_hw *[]) {
+				&gcc_sleep_clk_src.clkr.hw
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static const struct freq_tbl ftbl_sdcc_apps_clk_src[] = {
 	F(144000, P_XO, 16, 12, 125),
 	F(400000, P_XO, 12, 1, 5),
@@ -3985,6 +4020,8 @@ static struct clk_regmap *gcc_ipq9574_clks[] = {
 	[GCC_USB0_MOCK_UTMI_CLK] = &gcc_usb0_mock_utmi_clk.clkr,
 	[USB0_PIPE_CLK_SRC] = &usb0_pipe_clk_src.clkr,
 	[GCC_USB0_PHY_CFG_AHB_CLK] = &gcc_usb0_phy_cfg_ahb_clk.clkr,
+	[GCC_USB0_PIPE_CLK] = &gcc_usb0_pipe_clk.clkr,
+	[GCC_USB0_SLEEP_CLK] = &gcc_usb0_sleep_clk.clkr,
 	[SDCC1_APPS_CLK_SRC] = &sdcc1_apps_clk_src.clkr,
 	[GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr,
 	[SDCC1_ICE_CORE_CLK_SRC] = &sdcc1_ice_core_clk_src.clkr,
diff --git a/include/dt-bindings/clock/qcom,ipq9574-gcc.h b/include/dt-bindings/clock/qcom,ipq9574-gcc.h
index 2d7b460..2cb02f7 100644
--- a/include/dt-bindings/clock/qcom,ipq9574-gcc.h
+++ b/include/dt-bindings/clock/qcom,ipq9574-gcc.h
@@ -214,4 +214,6 @@
 #define GCC_PCIE1_PIPE_CLK				205
 #define GCC_PCIE2_PIPE_CLK				206
 #define GCC_PCIE3_PIPE_CLK				207
+#define GCC_USB0_PIPE_CLK				208
+#define GCC_USB0_SLEEP_CLK				209
 #endif
-- 
2.7.4

[PATCH v11 5/9] phy: qcom-qusb2: add QUSB2 support for IPQ9574

[Varadarajan Narayanan]

Add the phy init sequence for the Super Speed ports found
on IPQ9574.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
  Changes in v2:
	- Place the entry such that the list continues to be sorted
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 2ef638b..bec6e40 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -912,6 +912,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
 		.compatible	= "qcom,ipq8074-qusb2-phy",
 		.data		= &msm8996_phy_cfg,
 	}, {
+		.compatible	= "qcom,ipq9574-qusb2-phy",
+		.data		= &ipq6018_phy_cfg,
+	}, {
 		.compatible	= "qcom,msm8953-qusb2-phy",
 		.data		= &msm8996_phy_cfg,
 	}, {
-- 
2.7.4

[PATCH v11 6/9] phy: qcom: qmp: Update IPQ9574 USB Phy initialization Sequence

[Varadarajan Narayanan]

Updated USB QMP PHY Init sequence based on HPG for IPQ9574.
Reused clock and reset list from existing targets.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v6:
	- Fix pcs_usb offset
	- Use correct clock names array
 Changes in v5:
	- Fix additional review comments
	- Use V3 register offsets
 Changes in v4:
	- Use qmp_usb_offsets for register space access
 Changes in v3:
	- Fix hex captitalization
 Changes in v2:
	- Removed unused phy register offsets
	- Moved the clock entries to the correct place
	- Maintain sorted order
---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 115 ++++++++++++++++++++++++++++++++
 1 file changed, 115 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
index 5c039bb..6f2798b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c
@@ -139,6 +139,88 @@ static const unsigned int qmp_v5_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
 	[QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR,
 };
 
+static const struct qmp_phy_init_tbl ipq9574_usb3_serdes_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+	/* PLL and Loop filter settings */
+	QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x68),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0xab),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x09),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+	QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0xa0),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xaa),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x29),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+	/* SSC settings */
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x7d),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x0a),
+	QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x05),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_tx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_TX_HIGHZ_TRANSCEIVEREN_BIAS_DRVR_EN, 0x45),
+	QMP_PHY_INIT_CFG(QSERDES_TX_RCV_DETECT_LVL_2, 0x12),
+	QMP_PHY_INIT_CFG(QSERDES_TX_LANE_MODE, 0x06),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_rx_tbl[] = {
+	QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x6c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+	QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+	QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl ipq9574_usb3_pcs_tbl[] = {
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+	QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+};
+
 static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
 	QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
 	QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
@@ -1578,6 +1660,14 @@ static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
 };
 
+static const struct qmp_usb_offsets qmp_usb_offsets_ipq9574 = {
+	.serdes		= 0,
+	.pcs		= 0x800,
+	.pcs_usb	= 0x800,
+	.tx		= 0x200,
+	.rx		= 0x400,
+};
+
 static const struct qmp_usb_offsets qmp_usb_offsets_v5 = {
 	.serdes		= 0,
 	.pcs		= 0x0200,
@@ -1606,6 +1696,28 @@ static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
 	.regs			= qmp_v3_usb3phy_regs_layout,
 };
 
+static const struct qmp_phy_cfg ipq9574_usb3phy_cfg = {
+	.lanes			= 1,
+
+	.offsets		= &qmp_usb_offsets_ipq9574,
+
+	.serdes_tbl		= ipq9574_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(ipq9574_usb3_serdes_tbl),
+	.tx_tbl			= ipq9574_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(ipq9574_usb3_tx_tbl),
+	.rx_tbl			= ipq9574_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(ipq9574_usb3_rx_tbl),
+	.pcs_tbl		= ipq9574_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(ipq9574_usb3_pcs_tbl),
+	.clk_list		= msm8996_phy_clk_l,
+	.num_clks		= ARRAY_SIZE(msm8996_phy_clk_l),
+	.reset_list		= qcm2290_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(qcm2290_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+	.regs			= qmp_v3_usb3phy_regs_layout,
+};
+
 static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
 	.lanes			= 1,
 
@@ -2631,6 +2743,9 @@ static const struct of_device_id qmp_usb_of_match_table[] = {
 		.compatible = "qcom,ipq8074-qmp-usb3-phy",
 		.data = &ipq8074_usb3phy_cfg,
 	}, {
+		.compatible = "qcom,ipq9574-qmp-usb3-phy",
+		.data = &ipq9574_usb3phy_cfg,
+	}, {
 		.compatible = "qcom,msm8996-qmp-usb3-phy",
 		.data = &msm8996_usb3phy_cfg,
 	}, {
-- 
2.7.4

[PATCH v11 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes

[Varadarajan Narayanan]

Add USB phy and controller related nodes

SS PHY need two supplies and HS PHY needs three supplies. 0.925V
and 3.3V are from fixed regulators and 1.8V is generated from
PMIC's LDO

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v11:
	- Rename dwc_0 -> usb_0_dwc3
 Changes in v10:
	- Fix regulator definitions
 Changes in v8:
	- Change clocks order to match the bindings
 Changes in v7:
	- Change com_aux -> cfg_ahb
 Changes in v6:
	- Introduce fixed regulators for the phy
	- Resolved all 'make dtbs_check' messages

 Changes in v5:
	- Fix additional comments
	- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
	- 'make dtbs_check' giving the following messages since
	  ipq9574 doesn't have power domains. Hope this is ok

		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
        	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

 Changes in v4:
	- Use newer bindings without subnodes
	- Fix coding style issues

 Changes in v3:
	- Insert the nodes at proper location

 Changes in v2:
	- Fixed issues flagged by Krzysztof
	- Fix issues reported by make dtbs_check
	- Remove NOC related clocks (to be added with proper
	  interconnect support)
---
 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 104 ++++++++++++++++++++++++++++++++++
 1 file changed, 104 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 93b4ba9..42b61f6 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -150,6 +150,24 @@
 		method = "smc";
 	};
 
+	fixed_3p3: s3300 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_3p3";
+	};
+
+	fixed_0p925: s0925 {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <925000>;
+		regulator-max-microvolt = <925000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-name = "fixed_0p925";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -191,6 +209,45 @@
 			reg = <0x00060000 0x6000>;
 		};
 
+		usb_0_qusbphy: phy@7b000 {
+			compatible = "qcom,ipq9574-qusb2-phy";
+			reg = <0x0007b000 0x180>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&xo_board_clk>;
+			clock-names = "cfg_ahb",
+				      "ref";
+
+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+			status = "disabled";
+		};
+
+		usb_0_qmpphy: phy@7d000 {
+			compatible = "qcom,ipq9574-qmp-usb3-phy";
+			reg = <0x0007d000 0xa00>;
+			#phy-cells = <0>;
+
+			clocks = <&gcc GCC_USB0_AUX_CLK>,
+				 <&xo_board_clk>,
+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
+				 <&gcc GCC_USB0_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+
+			resets = <&gcc GCC_USB0_PHY_BCR>,
+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_phy";
+
+			status = "disabled";
+
+			#clock-cells = <0>;
+			clock-output-names = "usb0_pipe_clk";
+		};
+
 		pcie0_phy: phy@84000 {
 			compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
 			reg = <0x00084000 0x1000>;
@@ -560,6 +617,53 @@
 			status = "disabled";
 		};
 
+		usb3: usb@8a00000 {
+			compatible = "qcom,ipq9574-dwc3", "qcom,dwc3";
+			reg = <0x08af8800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			clocks = <&gcc GCC_SNOC_USB_CLK>,
+				 <&gcc GCC_USB0_MASTER_CLK>,
+				 <&gcc GCC_ANOC_USB_AXI_CLK>,
+				 <&gcc GCC_USB0_SLEEP_CLK>,
+				 <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi";
+
+			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
+					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+			assigned-clock-rates = <200000000>,
+					       <24000000>;
+
+			interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pwr_event";
+
+			resets = <&gcc GCC_USB_BCR>;
+			status = "disabled";
+
+			usb_0_dwc3: usb@8a00000 {
+				compatible = "snps,dwc3";
+				reg = <0x8a00000 0xcd00>;
+				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
+				clock-names = "ref";
+				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb_0_qusbphy>, <&usb_0_qmpphy>;
+				phy-names = "usb2-phy", "usb3-phy";
+				tx-fifo-resize;
+				snps,is-utmi-l1-suspend;
+				snps,hird-threshold = /bits/ 8 <0x0>;
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+				dr_mode = "host";
+			};
+		};
+
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			reg = <0x0b000000 0x1000>,  /* GICD */
-- 
2.7.4

Re: [PATCH v11 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes

[Kathiravan T]

On 5/9/2023 5:24 PM, Varadarajan Narayanan wrote:
> Add USB phy and controller related nodes
>
> SS PHY need two supplies and HS PHY needs three supplies. 0.925V
> and 3.3V are from fixed regulators and 1.8V is generated from
> PMIC's LDO
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
>   Changes in v11:
> 	- Rename dwc_0 -> usb_0_dwc3
>   Changes in v10:
> 	- Fix regulator definitions
>   Changes in v8:
> 	- Change clocks order to match the bindings
>   Changes in v7:
> 	- Change com_aux -> cfg_ahb
>   Changes in v6:
> 	- Introduce fixed regulators for the phy
> 	- Resolved all 'make dtbs_check' messages
>
>   Changes in v5:
> 	- Fix additional comments
> 	- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> 	- 'make dtbs_check' giving the following messages since
> 	  ipq9574 doesn't have power domains. Hope this is ok
>
> 		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
>          	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> 		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
>          	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
>
>   Changes in v4:
> 	- Use newer bindings without subnodes
> 	- Fix coding style issues
>
>   Changes in v3:
> 	- Insert the nodes at proper location
>
>   Changes in v2:
> 	- Fixed issues flagged by Krzysztof
> 	- Fix issues reported by make dtbs_check
> 	- Remove NOC related clocks (to be added with proper
> 	  interconnect support)
> ---
>   arch/arm64/boot/dts/qcom/ipq9574.dtsi | 104 ++++++++++++++++++++++++++++++++++
>   1 file changed, 104 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 93b4ba9..42b61f6 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -150,6 +150,24 @@
>   		method = "smc";
>   	};
>   
> +	fixed_3p3: s3300 {
> +		compatible = "regulator-fixed";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +		regulator-name = "fixed_3p3";
> +	};
> +
> +	fixed_0p925: s0925 {
> +		compatible = "regulator-fixed";
> +		regulator-min-microvolt = <925000>;
> +		regulator-max-microvolt = <925000>;
> +		regulator-boot-on;
> +		regulator-always-on;
> +		regulator-name = "fixed_0p925";
> +	};
> +
>   	reserved-memory {
>   		#address-cells = <2>;
>   		#size-cells = <2>;
> @@ -191,6 +209,45 @@
>   			reg = <0x00060000 0x6000>;
>   		};
>   
> +		usb_0_qusbphy: phy@7b000 {
> +			compatible = "qcom,ipq9574-qusb2-phy";
> +			reg = <0x0007b000 0x180>;
> +			#phy-cells = <0>;
> +
> +			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> +				 <&xo_board_clk>;
> +			clock-names = "cfg_ahb",
> +				      "ref";
> +
> +			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> +			status = "disabled";
> +		};
> +
> +		usb_0_qmpphy: phy@7d000 {
> +			compatible = "qcom,ipq9574-qmp-usb3-phy";
> +			reg = <0x0007d000 0xa00>;
> +			#phy-cells = <0>;
> +
> +			clocks = <&gcc GCC_USB0_AUX_CLK>,
> +				 <&xo_board_clk>,
> +				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> +				 <&gcc GCC_USB0_PIPE_CLK>;
> +			clock-names = "aux",
> +				      "ref",
> +				      "cfg_ahb",
> +				      "pipe";
> +
> +			resets = <&gcc GCC_USB0_PHY_BCR>,
> +				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
> +			reset-names = "phy",
> +				      "phy_phy";
> +
> +			status = "disabled";
> +
> +			#clock-cells = <0>;
> +			clock-output-names = "usb0_pipe_clk";
> +		};
> +
>   		pcie0_phy: phy@84000 {
>   			compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
>   			reg = <0x00084000 0x1000>;
> @@ -560,6 +617,53 @@
>   			status = "disabled";
>   		};
>   
> +		usb3: usb@8a00000 {

node address should be updated to 8af8800 ?

Thanks,

Re: [PATCH v11 7/9] arm64: dts: qcom: ipq9574: Add USB related nodes

[Varadarajan Narayanan]

On Mon, May 15, 2023 at 04:06:29PM +0530, Kathiravan T wrote:
> 
> On 5/9/2023 5:24 PM, Varadarajan Narayanan wrote:
> >Add USB phy and controller related nodes
> >
> >SS PHY need two supplies and HS PHY needs three supplies. 0.925V
> >and 3.3V are from fixed regulators and 1.8V is generated from
> >PMIC's LDO
> >
> >Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> >Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> >---
> >  Changes in v11:
> >	- Rename dwc_0 -> usb_0_dwc3
> >  Changes in v10:
> >	- Fix regulator definitions
> >  Changes in v8:
> >	- Change clocks order to match the bindings
> >  Changes in v7:
> >	- Change com_aux -> cfg_ahb
> >  Changes in v6:
> >	- Introduce fixed regulators for the phy
> >	- Resolved all 'make dtbs_check' messages
> >
> >  Changes in v5:
> >	- Fix additional comments
> >	- Edit nodes to match with qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> >	- 'make dtbs_check' giving the following messages since
> >	  ipq9574 doesn't have power domains. Hope this is ok
> >
> >		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: phy@7d000: 'power-domains' is a required property
> >         	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
> >		/local/mnt/workspace/varada/varda-linux/arch/arm64/boot/dts/qcom/ipq9574-al02-c7.dtb: usb@8a00000: 'power-domains' is a required property
> >         	From schema: /local/mnt/workspace/varada/varda-linux/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
> >
> >  Changes in v4:
> >	- Use newer bindings without subnodes
> >	- Fix coding style issues
> >
> >  Changes in v3:
> >	- Insert the nodes at proper location
> >
> >  Changes in v2:
> >	- Fixed issues flagged by Krzysztof
> >	- Fix issues reported by make dtbs_check
> >	- Remove NOC related clocks (to be added with proper
> >	  interconnect support)
> >---
> >  arch/arm64/boot/dts/qcom/ipq9574.dtsi | 104 ++++++++++++++++++++++++++++++++++
> >  1 file changed, 104 insertions(+)
> >
> >diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> >index 93b4ba9..42b61f6 100644
> >--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> >+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> >@@ -150,6 +150,24 @@
> >  		method = "smc";
> >  	};
> >+	fixed_3p3: s3300 {
> >+		compatible = "regulator-fixed";
> >+		regulator-min-microvolt = <3300000>;
> >+		regulator-max-microvolt = <3300000>;
> >+		regulator-boot-on;
> >+		regulator-always-on;
> >+		regulator-name = "fixed_3p3";
> >+	};
> >+
> >+	fixed_0p925: s0925 {
> >+		compatible = "regulator-fixed";
> >+		regulator-min-microvolt = <925000>;
> >+		regulator-max-microvolt = <925000>;
> >+		regulator-boot-on;
> >+		regulator-always-on;
> >+		regulator-name = "fixed_0p925";
> >+	};
> >+
> >  	reserved-memory {
> >  		#address-cells = <2>;
> >  		#size-cells = <2>;
> >@@ -191,6 +209,45 @@
> >  			reg = <0x00060000 0x6000>;
> >  		};
> >+		usb_0_qusbphy: phy@7b000 {
> >+			compatible = "qcom,ipq9574-qusb2-phy";
> >+			reg = <0x0007b000 0x180>;
> >+			#phy-cells = <0>;
> >+
> >+			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> >+				 <&xo_board_clk>;
> >+			clock-names = "cfg_ahb",
> >+				      "ref";
> >+
> >+			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
> >+			status = "disabled";
> >+		};
> >+
> >+		usb_0_qmpphy: phy@7d000 {
> >+			compatible = "qcom,ipq9574-qmp-usb3-phy";
> >+			reg = <0x0007d000 0xa00>;
> >+			#phy-cells = <0>;
> >+
> >+			clocks = <&gcc GCC_USB0_AUX_CLK>,
> >+				 <&xo_board_clk>,
> >+				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
> >+				 <&gcc GCC_USB0_PIPE_CLK>;
> >+			clock-names = "aux",
> >+				      "ref",
> >+				      "cfg_ahb",
> >+				      "pipe";
> >+
> >+			resets = <&gcc GCC_USB0_PHY_BCR>,
> >+				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
> >+			reset-names = "phy",
> >+				      "phy_phy";
> >+
> >+			status = "disabled";
> >+
> >+			#clock-cells = <0>;
> >+			clock-output-names = "usb0_pipe_clk";
> >+		};
> >+
> >  		pcie0_phy: phy@84000 {
> >  			compatible = "qcom,ipq9574-qmp-gen3x1-pcie-phy";
> >  			reg = <0x00084000 0x1000>;
> >@@ -560,6 +617,53 @@
> >  			status = "disabled";
> >  		};
> >+		usb3: usb@8a00000 {
> 
> node address should be updated to 8af8800 ?

Ok. Will update and post a new patchset.

Thanks
Varada

[PATCH v11 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node

[Varadarajan Narayanan]

Add LDO regulator node

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v10:
	- Add LDO regulator node
---
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index bdc1434..1f5d14f 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -60,6 +60,13 @@
 			regulator-min-microvolt = <725000>;
 			regulator-max-microvolt = <1075000>;
 		};
+
+		mp5496_l2: l2 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
 	};
 };
 
-- 
2.7.4

Re: [PATCH v11 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node

[Dmitry Baryshkov]

On Tue, 9 May 2023 at 14:56, Varadarajan Narayanan
<quic_varada@quicinc.com> wrote:
>
> Add LDO regulator node
>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
>  Changes in v10:
>         - Add LDO regulator node
> ---
>  arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 7 +++++++
>  1 file changed, 7 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Minor question below:

>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> index bdc1434..1f5d14f 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> @@ -60,6 +60,13 @@
>                         regulator-min-microvolt = <725000>;
>                         regulator-max-microvolt = <1075000>;
>                 };
> +
> +               mp5496_l2: l2 {
> +                       regulator-min-microvolt = <1800000>;
> +                       regulator-max-microvolt = <1800000>;
> +                       regulator-boot-on;
> +                       regulator-always-on;

This usually points out that there are other users which are not yet
enabled/properly specified. What users are there for this supply which
demand it to be always on?

> +               };
>         };
>  };
>
> --
> 2.7.4
>


-- 
With best wishes
Dmitry

Re: [PATCH v11 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node

[Varadarajan Narayanan]

On Tue, May 09, 2023 at 04:08:59PM +0300, Dmitry Baryshkov wrote:
> On Tue, 9 May 2023 at 14:56, Varadarajan Narayanan
> <quic_varada@quicinc.com> wrote:
> >
> > Add LDO regulator node
> >
> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> > ---
> >  Changes in v10:
> >         - Add LDO regulator node
> > ---
> >  arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 7 +++++++
> >  1 file changed, 7 insertions(+)
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
>
> Minor question below:
>
> >
> > diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > index bdc1434..1f5d14f 100644
> > --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > @@ -60,6 +60,13 @@
> >                         regulator-min-microvolt = <725000>;
> >                         regulator-max-microvolt = <1075000>;
> >                 };
> > +
> > +               mp5496_l2: l2 {
> > +                       regulator-min-microvolt = <1800000>;
> > +                       regulator-max-microvolt = <1800000>;
> > +                       regulator-boot-on;
> > +                       regulator-always-on;
>
> This usually points out that there are other users which are not yet
> enabled/properly specified. What users are there for this supply which
> demand it to be always on?

The 1.8v rail is used by PCIe PHY, PLL for Ethernet SerDes
interface and PLLs that generate SoC clocks. The voting for this
rail is managed by the RPM f/w.

Thanks
Varada

> > +               };
> >         };
> >  };
> >
> > --
> > 2.7.4
> >
>
>
> --
> With best wishes
> Dmitry

Re: [PATCH v11 8/9] arm64: dts: qcom: ipq9574: Add LDO regulator node

[Dmitry Baryshkov]

On Wed, 10 May 2023 at 13:23, Varadarajan Narayanan
<quic_varada@quicinc.com> wrote:
>
> On Tue, May 09, 2023 at 04:08:59PM +0300, Dmitry Baryshkov wrote:
> > On Tue, 9 May 2023 at 14:56, Varadarajan Narayanan
> > <quic_varada@quicinc.com> wrote:
> > >
> > > Add LDO regulator node
> > >
> > > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> > > ---
> > >  Changes in v10:
> > >         - Add LDO regulator node
> > > ---
> > >  arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 7 +++++++
> > >  1 file changed, 7 insertions(+)
> >
> > Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> >
> > Minor question below:
> >
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > > index bdc1434..1f5d14f 100644
> > > --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > > +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
> > > @@ -60,6 +60,13 @@
> > >                         regulator-min-microvolt = <725000>;
> > >                         regulator-max-microvolt = <1075000>;
> > >                 };
> > > +
> > > +               mp5496_l2: l2 {
> > > +                       regulator-min-microvolt = <1800000>;
> > > +                       regulator-max-microvolt = <1800000>;
> > > +                       regulator-boot-on;
> > > +                       regulator-always-on;
> >
> > This usually points out that there are other users which are not yet
> > enabled/properly specified. What users are there for this supply which
> > demand it to be always on?
>
> The 1.8v rail is used by PCIe PHY, PLL for Ethernet SerDes
> interface and PLLs that generate SoC clocks. The voting for this
> rail is managed by the RPM f/w.

Then I'm looking forward to seeing the patch which declares all the
actual users of the lane. Please do not declare power lanes as
boot-on/always-on unless there is a strong reason for doing it.

>
> Thanks
> Varada
>
> > > +               };
> > >         };
> > >  };
> > >
> > > --
> > > 2.7.4
> > >
> >
> >
> > --
> > With best wishes
> > Dmitry



-- 
With best wishes
Dmitry

[PATCH v11 9/9] arm64: dts: qcom: ipq9574: Enable USB

[Varadarajan Narayanan]

Turn on USB related nodes
Provide vdd info

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 Changes in v11:
	- Rename dwc_0 -> usb_0_dwc3
	- Maintain sorted order for the usb nodes

 Changes in v10:
	- Provide vdd info

 Changes in v5:
	- Move "host" mode specification to board dts
	- Due to dependency with earlier patches board dts
	  filename changed ipq9574-al02-c7.dts -> ipq9574-rdp433.dts

 Changes in v2:
	- Fix node placement and coding style
	- "ok" -> "okay"
---
 arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index 1f5d14f..ea38098 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -188,6 +188,29 @@
 	};
 };
 
+&usb_0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_0_qmpphy {
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-supply = <&fixed_0p925>;
+
+	status = "okay";
+};
+
+&usb_0_qusbphy {
+	vdd-supply = <&fixed_0p925>;
+	vdda-pll-supply = <&mp5496_l2>;
+	vdda-phy-dpdm-supply = <&fixed_3p3>;
+
+	status = "okay";
+};
+
+&usb3 {
+	status = "okay";
+};
+
 &xo_board_clk {
 	clock-frequency = <24000000>;
 };
-- 
2.7.4

Re: [PATCH v11 9/9] arm64: dts: qcom: ipq9574: Enable USB

[Dmitry Baryshkov]

On Tue, 9 May 2023 at 14:56, Varadarajan Narayanan
<quic_varada@quicinc.com> wrote:
>
> Turn on USB related nodes
> Provide vdd info
>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
>  Changes in v11:
>         - Rename dwc_0 -> usb_0_dwc3
>         - Maintain sorted order for the usb nodes
>
>  Changes in v10:
>         - Provide vdd info
>
>  Changes in v5:
>         - Move "host" mode specification to board dts
>         - Due to dependency with earlier patches board dts
>           filename changed ipq9574-al02-c7.dts -> ipq9574-rdp433.dts
>
>  Changes in v2:
>         - Fix node placement and coding style
>         - "ok" -> "okay"
> ---
>  arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

-- 
With best wishes
Dmitry

Re: [PATCH v11 0/9] Enable IPQ9754 USB

[Vinod Koul]

On 09-05-23, 17:24, Varadarajan Narayanan wrote:
> This patch series adds the relevant phy and controller
> configurations for enabling USB on IPQ9754

Applied phy patches, 1,2,5,6

-- 
~Vinod